EW4DWLA001Wireless LAN Desktop Unit

Mitsumi Electric Co., Ltd. Wavit11 User's Manual 1/108 CONFIDENTIAL Wavit11 User’s Manual Revision 1.01 Mitsumi Electric Co., Ltd. Wavit11 User's Manual 2/108 CONFIDENTIAL Revision History December 6, 2001 Revision 1.0 Translated from Japanese edition (Rev. 1.0) January 19, 2002 Revision 1.01 Regulatory Compliance Notice changed Mitsumi Electric Co., Ltd. Wavit11 User's Manual 3/108 CONFIDENTIAL Contents Revision History............................................................................................2 About This Guide..........................................................................................5 Regulatory Compliance Notices................................................................6 1. Preface....................................................................................................8 1. Preface....................................................................................................8 2. Accompanied Accessories........................................................................8 3. Features..................................................................................................8 4. How to use Wavit11.................................................................................9 5. About Wireless LAN Network...............................................................10 5.1. Ad-Hoc LAN..................................................................................11 5.2. IBSS LAN......................................................................................12 5.3. Infrastructure LAN..........................................................................13 5.4. Wireless Bridge...............................................................................14 6. Installation method of Wavit11 Configuration Utility..............................15 6.1. Microsoft Windows Version............................................................16 6.2. Confirm an Ethernet port.................................................................17 6.3. Confirm the TCP/IP protocol...........................................................19 6.4. Confirm an IP Address....................................................................25 6.5. Installation of the Wavit11Configuration Utility...............................28 7. Wavit11 Set Up.....................................................................................33 7.1. How to Start the Wavit11Configuration Utility.................................34 7.2. How to setup the Ad-Hoc mode.......................................................38 7.3. How to Setup the 802.11 Ad-Hoc mode...........................................41 7.4. How to Setup the Infrastructure mode..............................................44 7.5. How to Setup the Both mode...........................................................47 7.6. How to Setup the AP mode..............................................................51 7.7. How to Setup the Wireless Bridge Mode..........................................55 7.8. How to Change the Wavit11 IP address............................................59 7.9. How to Change the Control Password..............................................61 7.10. Wavit11 Initialization....................................................................63 8. Encryption Setting.................................................................................65 8.1. Encryption setting...........................................................................65 8.2. Original Encryption........................................................................68 8.2. 40bit WEP Encryption.....................................................................71 8.3. 128bit WEP Encryption...................................................................74 8.4. Encryption Disable..........................................................................77 Mitsumi Electric Co., Ltd. Wavit11 User's Manual 4/108 CONFIDENTIAL 9. Wavit11Setting up.................................................................................79 9.1. Connection to personal computer.....................................................80 9.2. Connection to Printer......................................................................81 9.3. Connection to Network Equipment..................................................82 10. Items that can be set with Configuration Utility....................................83 10.1. Operational Mode.........................................................................84 10.2. SS ID............................................................................................85 10.3. Channel........................................................................................86 10.4. Data Rate......................................................................................87 10.5. Roaming.......................................................................................88 10.6. Hidden Node Compensation..........................................................89 10.7. Details..........................................................................................90 10.8. RTS Threshold..............................................................................91 10.9. Fragmentation Threshold...............................................................92 10.10. Short Retry Limit........................................................................93 10.11. Long Retry Limit.........................................................................94 10.12. Beacon Interval...........................................................................95 10.13. SSID transmission.......................................................................96 10.14. Authentication Algorithm............................................................97 10.15. Basic Rate Set.............................................................................98 10.16. Encryption mode.................…

Text truncated - open the document above for the full version.

Mitsumi Electric Co., Ltd. Wavit11 User's Manual 33/108 CONFIDENTIAL 7. Wavit11 Set Up “How to Start the Wavit11Configuration Utility” page34 1. Start Wavit11 Configuration Utility. 2. Set the Wavit11 in accordance with a communication mode. “How to setup the Ad-Hoc mode” page38 “How to Setup the 802.11 Ad-Hoc mode” page41 “How to Setup the Infrastructure mode” page44 “How to Setup the AP mode” page51 “How to Setup the Wireless Bridge Mode” page57 Mitsumi Electric Co., Ltd. Wavit11 User's Manual 34/108 CONFIDENTIAL 7.1. How to Start the Wavit11Configuration Utility [STEP1] Connect Wavit11 and personal computer using the straight cable. [STEP2] Connect DC plug of AC adapter to Wavit11 DC IN jack. [STEP3] Connect AC adapter to AC outlet. [STEP4] Click the “Wavit11 Configuration Utility” icon. [STEP5] “Wavit11 Wireless LAN” window appears. The information of Wavit11 that is connected to this personal computer is displayed in the station list in the “Wavit11 Wireless LAN” window. Mitsumi Electric Co., Ltd. Wavit11 User's Manual 35/108 CONFIDENTIAL In the case that only "MAC Address" and "IP Address" are displayed in the station list in the "Wavit11 Wireless LAN" window, you cannot set up the Wavit11. Modify the IP address of Wavit11. “How to Change the Wavit11 IP address” page59 Mitsumi Electric Co., Ltd. Wavit11 User's Manual 36/108 CONFIDENTIAL In the case that nothing is displayed to the station list of the ”Wavit11 Wireless LAN” window, you cannot set up the Wavit11. Confirm the following. 1. Connection between the Wavit11 and your personal computer 2. Connection between the Wavit11 and the AC adapter 3. Connection between the AC adapter and the AC outlet 4. TCP/IP setting of your personal computer Mitsumi Electric Co., Ltd. Wavit11 User's Manual 37/108 CONFIDENTIAL [STEP6] Click “Setup” in the “Wavit11 Wireless LAN” window. If the operational mode is “AP” or “Wireless Bridge”: The “Log in” window will appear after clicking the “Setup” button. Input control password. The default control password is “password”. Initialize Wavit11 when you have forgotten the control password. “Wavit11 Initialization” page63 Mitsumi Electric Co., Ltd. Wavit11 User's Manual 38/108 CONFIDENTIAL 7.2. How to setup the Ad-Hoc mode [STEP1] Click the “Setup” in the “Wavit11 Wireless LAN” window. [STEP2] Click the “Property” page. Mitsumi Electric Co., Ltd. Wavit11 User's Manual 39/108 CONFIDENTIAL [STEP3] At the “Property” page, change the Operational Mode to “Ad-Hoc”, select the Channel and then click the “Apply” button. [STEP4] Click the “OK” button. The Channel should be same on all Wavit11 in Ad-Hoc mode. The Wavit11 that has different Channel cannot communicate each other. Mitsumi Electric Co., Ltd. Wavit11 User's Manual 40/108 CONFIDENTIAL [STEP5] In the “Status” page, check that the Operational Mode is set to “Ad-Hoc” and the Channel is set correctly as you selected, and then click the “OK” button. [STEP6] After returning to the “Wavit11 Wireless LAN” window, check that all setups you selected are reflected correctly, and then end the “Wavit11 Configuration Utility”. When your selection is not reflected, click the "Search”. Mitsumi Electric Co., Ltd. Wavit11 User's Manual 41/108 CONFIDENTIAL 7.3. How to Setup the 802.11 Ad-Hoc mode [STEP1] Click the “Setup” in the “Wavit11 Wireless LAN” window. [STEP2] Click the “Property” page. Mitsumi Electric Co., Ltd. Wavit11 User's Manual 42/108 CONFIDENTIAL [STEP3] At the “Property” page, change the Operational Mode to “802.11 Ad-Hoc” and set the “SSID”, and then click the “Apply” button. [STEP4] Click the “OK” button. Set the SSID in 802.11 Ad-Hoc mode. Wavit11 with different SSID cannot communicate each other. Mitsumi Electric Co., Ltd. Wavit11 User's Manual 43/108 CONFIDENTIAL [STEP5] In the “Status” page, check that the Operational Mode is set to “802.11 Ad-Hoc” and the Channel is set correctly as you selected, and then click the “OK” button. [STEP6] After returning to the “Wavit11 Wireless LAN” window, check that all setups you selected are reflected correctly and then end the “Wavit11 Configuration Utility” Mitsumi Electric Co., Ltd. Wavit11 User's Manual 44/108 CONFIDENTIAL 7.4. How to Setup the Infrastructure mode [STEP1] Click the “Setup” in the “Wavit11 Wireless LAN” window. [STEP2] Click the “Property” page. Mitsumi Electric Co., Ltd. Wavit11 User's Manual 45/108 CONFIDENTIAL [STEP3] At the “Property” page, change the Operational Mode to “Infrastructure” mode and set the SSID, then click the ”Apply” button. [STEP4] Click the “OK” button. Set the SSID in Infrastructure mode. This SSID must be same with that of Access Point. Mitsumi Electric Co., Ltd. Wavit11 User's Manual 46/108 CONFIDENTIAL [STEP5] In the “Status” page, check that the Operational Mode is set to “Infrastructure”, and then click the “OK” button. [STEP6] After returning to the “Wavit11 Wireless LAN” window, check that all setups you selected are reflected correctly and then end the “Wavit11 Configuration Utility. Mitsumi Electric Co., Ltd. Wavit11 User's Manual 47/108 CONFIDENTIAL 7.5. How to Setup the Both mode If there is an Access Point, Wavit11 in Both mode is will operate as Wavit11 in Infrastructure mode. If there is no Access Point, Wavit11 in Both mode will operate as Wavit11 in Ad-Hoc mode. AP Mode Infrastructure Mode Both Mode Router Hub Internet Hub Ad-Hoc ModeAd-Hoc Mode Ad-Hoc LAN Both mode The Wavit11 in Both mode cannot operate both Infrastructure LAN and Ad-Hoc LAN simultaneity. The Wavit11 in Both mode decides whether there is an Access Point or not at the time of boot and then it decides whether it should connect to Access Point or join to Ad-Hoc LAN. To connect to Access Point after joining to Ad-Hoc LAN, it is necessary to reboot Wavit11. Mitsumi Electric Co., Ltd. Wavit11 User's Manual 48/108 CONFIDENTIAL [STEP1] Click the “Setup” in the “Wavit11 Wireless LAN” window. [STEP2] Click the “Property” page. Mitsumi Electric Co., Ltd. Wavit11 User's Manual 49/108 CONFIDENTIAL [S…

Text truncated - open the document above for the full version.

Mitsumi Electric Co., Ltd. Wavit11 User's Manual 65/108 CONFIDENTIAL 8. Encryption Setting 8.1. Encryption setting [STEP1] Click the “Setup” in the “Wavit11 Wireless LAN” window. [STEP2] Click the “Encryption mode” page. Mitsumi Electric Co., Ltd. Wavit11 User's Manual 66/108 CONFIDENTIAL [STEP3] The “encryption mode” page opens. Select an encryption mode; the encryption mode at the time of factory shipment is “Disable”. Mitsumi Electric Co., Ltd. Wavit11 User's Manual 67/108 CONFIDENTIAL There are 3 type of encryption mode. 1. Mitsumi proprietary Original Encryption. 2. 40bit WEP Encryption. 3. 128bit WEP Encryption. “Original Encryption” page68 “40bit WEP Encryption” page71 “128bit WEP Encryption” page74 “Encryption Disable” page77 Mitsumi Electric Co., Ltd. Wavit11 User's Manual 68/108 CONFIDENTIAL 8.2. Original Encryption [STEP1] At the “Encryption mode” page, select the “Original” as an Encryption mode, input a Generation string that generates encryption keys, and then click the “Generate” button. [STEP2] Select the “Default Key”. Mitsumi Electric Co., Ltd. Wavit11 User's Manual 69/108 CONFIDENTIAL [STEP3] Click the “Write” button. [STEP4] Click the “OK” button. Mitsumi Electric Co., Ltd. Wavit11 User's Manual 70/108 CONFIDENTIAL [STEP5] The Encryption mode and the Encryption keys are written. Click the “OK” button. [STEP6] After returning to the “Wavit11 Wireless LAN” window, end the Wavit11 Configuration Utility. Mitsumi Electric Co., Ltd. Wavit11 User's Manual 71/108 CONFIDENTIAL 8.2. 40bit WEP Encryption [STEP1] At the “Encryption mode” page, select the “40bit WEP” as an Encryption mode, input a Generation string that generates encryption keys, and then click the “Generate” button. [STEP2] Select the “Default Key”. Mitsumi Electric Co., Ltd. Wavit11 User's Manual 72/108 CONFIDENTIAL [STEP3] Click the “Write” button. [STEP4] Click the “OK” button. Mitsumi Electric Co., Ltd. Wavit11 User's Manual 73/108 CONFIDENTIAL [STEP5] The Encryption mode and the Encryption keys are written. Click the “OK” button. [STEP6] After returning to the “ Wavit11 Wireless LAN” window, end the Wavit11 Configuration Utility. Mitsumi Electric Co., Ltd. Wavit11 User's Manual 74/108 CONFIDENTIAL 8.3. 128bit WEP Encryption [STEP1] At the “Encryption mode” page, select the “128bit WEP” as an Encryption mode, input a Generation string that generates encryption key, and then click the “Generate” button. [STEP2] Click the “Write” button. Mitsumi Electric Co., Ltd. Wavit11 User's Manual 75/108 CONFIDENTIAL [STEP3] Click the “OK” button. [STEP4] The Encryption mode and the Encryption key are written. Click the “OK” button. Mitsumi Electric Co., Ltd. Wavit11 User's Manual 76/108 CONFIDENTIAL [STEP6] After returning to the “Wavit11 Wireless LAN” window, end the Wavit11 Configuration Utility. Mitsumi Electric Co., Ltd. Wavit11 User's Manual 77/108 CONFIDENTIAL 8.4. Encryption Disable [STEP1] Select the “Disable” as an Encryption mode, and then click the “Write” button. [STEP2] Click the “OK” button. Mitsumi Electric Co., Ltd. Wavit11 User's Manual 78/108 CONFIDENTIAL [STEP3] The Encryption mode is written. Click the “OK” button. [STEP4] After returning to the “Wavit11 Wireless LAN” window, end the Wavit11 Configuration Utility. Mitsumi Electric Co., Ltd. Wavit11 User's Manual 79/108 CONFIDENTIAL 9. Wavit11Setting up “Connection to personal computer” page80 “Connection to Printer” page81 “Connection to Network Equipment” page82 Mitsumi Electric Co., Ltd. Wavit11 User's Manual 80/108 CONFIDENTIAL 9.1. Connection to personal computer [STEP1] Connect Wavit11 and the personal computer with a straight cable. [STEP2] Connect the DC plug of the AC adapter to the Wavit11 DC jack. [STEP3] Connect the AC adapter to the AC outlet. The setup of Wavit11 must be completed in advance, or the setup can be done after [STEP3]. To connect to a personal computer, the following modes are recommended. Ad-Hoc mode 802.11Ad-Hoc mode Infrastructure mode “Wavit11 Set Up” page33 Mitsumi Electric Co., Ltd. Wavit11 User's Manual 81/108 CONFIDENTIAL 9.2. Connection to Printer [STEP1] Set the Wavit11 appropriately. [STEP2] Connect Wavit11 and printer with a straight cable. [STEP3] Connect the DC plug of the AC adapter to the Wavit11 DC jack. [STEP4] Connect the AC adapter to the AC outlet. The setup of Wavit11 must be completed in advance. The printer to connect to Wavit11 needs the Ethernet port. To connect to the printer, the following operational mode are recommended. Ad-Hoc mode 802.11Ad-Hoc mode Infrastructure mode “Wavit11 Set Up” page33 Mitsumi Electric Co., Ltd. Wavit11 User's Manual 82/108 CONFIDENTIAL 9.3. Connection to Network Equipment [STEP1] Set the Wavit11 appropriately. [STEP2] Connect Wavit11 and personal computer with a straight cable. [STEP3] Connect the DC plug of the AC adapter to the Wavit11 DC jack. [STEP4] Connect the AC adapter to the AC outlet. Example of the Network equipment is as follows. HUB Cable Modem ADSL Modem Router The setup of Wavit11 must be completed in advance. To connect to network equipment, the “AP” mode is recommended. “Wavit11 Set Up” page33 Mitsumi Electric Co., Ltd. Wavit11 User's Manual 83/108 CONFIDENTIAL 10. Items that can be set with Configuration Utility You can set the following items with the Wavit11 Configuration Utility. Items Choice Operational Mode Ad-Hoc, Infrastructure, Both, AP, Wireless Bridge, 802.11Ad-Hoc SS ID Within 32 letters (ASCII code: 0x20 - 0x7e) Channel 1-11 Data Rate 1M, 2M, 5.5M, 11M, Auto Roaming Enable/Disable Hidden Node Compensation Enable/Disable RTS Threshold 0-2347, Default 2347 Fragmentation Threshold 256 –2346, Default 2346 Short Retry Limit 1-255, Default 7 Long Retry Limit 1-255, Default 4 Beacon Interval 20-1000 ms, Default 100 SSID Transmission Enable/Disable Authentication Algorithm Open system/Shared Key Basic Rate Set 1,2Mbps/1,2,5.5,11Mbps Encryption Mode Disable/Original/40bit WEP/128bit WEP Encryption Key 5byte x 4, Default key Default Key 1-4 Destination…

Text truncated - open the document above for the full version.

Akzo Nobel K. K. EMC Division Bancho Kaikan 12-1, Gobancho, Chiyoda-ku Tokyo 102-0076 Japan Tel.+81 3 5210 5411 Fax.+81 3 5216 2860 June 3, 2002 Federal Communications Commission Office of Engineering and Technology 7435 Oakland Mills Road Columbia, MD 21046 Attn: Reviewing Engineer RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize MET Laboratories, Inc. to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988,21 U.S.C.862. This authorization expires one year from the current date. Sincerely, Akzo Nobel K. K. Katsutoshi Wakui Customer Support Group EMC Division

LABEL INFORMATION MITSUMI ELECTRIC CO.,LTD. Model:Wavit11 Made in TAIWAN This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID : EW4DWLA001 < MAC Address No. > MITSUMI ELECTRIC CO.,LTD. Model:Wavit11 Made in TAIWAN This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID : EW4DWLA001 < MAC Address No. > NOTES: 1) LABEL SIZE: 35 X 30 mm 2) BACKGROUND COLOR: WHITE 3) PRINT TYPE & COLOR: HELVETICA / BLACK FCC LABEL AND LOCATION

Theory of Operation 1. Product description The model Wavit 11 wireless LAN(referred to as the EUT in this report) is a Direct Sequence Spread Spectrum wireless. The EUT provides wireless communications between computers. The EUT is designed to be connected into the 10 BASE-T of desktop computer with cable. The EUT communicate with other wireless LAN using the frequency range from 2.412GHz to 2.462GHz. The EUT is supplied a power by AC adapter. 2. Specifications Item Specification Frequency 2,400 -2,483.5MHz Channel 11 Modulation CCK (Complementary Code Keying) Interface 10BASE-T Data Rate 11Mbps/5.5Mbps/2Mbps/1Mbps Receive Sensitivity -83dBm(11Mbps, FER=8x10 -2 ) Output Power 15dBm Temperature Range 0-40 Celsius Standards ARIB STD-T66 IEEE 802.11b Supply Voltage 5.0V Consumption Current TX: 600mA RX: 330mA Size 65(W) x88(D) x 29.9(H) mm, Antenna is excluded Weight 110g 3. Frequencies and Channel number Frequency (MHz) Channel number Frequency (MHz) Channel number Frequency (MHz) Channel number 2412 1 2437 6 2462 11 2417 2 2442 7 2467 Not used 2422 3 2447 8 2472 Not used 2427 4 2452 9 2432 5 2457 10

T E S T R E P O R T REPORT NUMBER:ANKK−102012 APPLICANT:MITSUMI ELECTRIC CO., LTD. MODEL NUMBER:Wavit 11 Wireless LAN (DWL-A001) FCC ID:EW4DWLA001 REGULATION:FCC Part15B Class B Canada ICES−003 Class B Conducted Emission Test Radiated Emission Test 1, Oaza Sunayama, Hasaki−machi, Kashima−gun Ibaraki−ken, 314−0255 Japan Tel.: +81 479 40 1097 Fax.: +81 479 46 1788 Akzo Nobel K. K. EMC Division Kashima Site NVLAP accreditation is valid for FCC Part15 (Digital Devices), CISPR22 and AS/NZS 3548. NVLAP accreditation does not cover ICES − 003. Akzo Nobel Report No. ANKK−102012FCC ID : EW4DWLA001Page 2 of 24 (Version 5.2) TABLE OF CONTENTS Page ABBREVIATIONS ............................................................................................................................ 3 SECTION 1.TEST CERTIFICATION ....................................................................................... 4 SECTION 2.CONCLUSION ...................................................................................................... 5 SECTION 3.EQUIPMENT UNDER TEST................................................................................ 6 SECTION 4.SUPPORT EQUIPMENT USED ........................................................................... 7 SECTION 5.CABLE (S) USED .................................................................................................. 8 SECTION 6.CONSTRUCTION OF EQUIPMENT.................................................................... 9 SECTION 7.OPERATING CONDITIONS............................................................................... 10 SECTION 8.TEST PROCEDURE(S) ....................................................................................... 11 SECTION 9.EVALUATION OF TEST RESULTS .................................................................. 16 SECTION 10.PHOTOGRAPHS OF MAXIMUM EMISSION SET−UP .................................... 20 SECTION 11.INSTRUMENTS USED FOR FINAL TEST ....................................................... 20 SECTION 12.MEASUREMENT UNCERTAINTY.................................................................... 20 SECTION 13.DESCRIPTION OF TEST LABORATORY......................................................... 20 Akzo Nobel Report No. ANKK−102012FCC ID : EW4DWLA001Page 3 of 24 (Version 5.2) ABBREVIATIONS LISN= Line Impedance Stabilization Network AMN= Artificial Mains Network ISN= Impedance Stabilization Network CDN= Coupling Decoupling Network ANT= Antenna BBA= Broadband Antenna DIP= Dipole Antenna AMP= Amplifier ATT= Attenuator EUT= Equipment Under Test AE= Associated Equipment Q−P= Quasi−peak AVG= Average Akzo Nobel Report No. ANKK−102012FCC ID : EW4DWLA001Page 4 of 24 (Version 5.2) SECTION 1. TEST CERTIFICATION APPLICANT INFORMATION Company: MITSUMI ELECTRIC CO., LTD. Address: 1601, Sakai Atsugi-shi, Kanagawa-ken, 243-8533 Japan Telephone number: +81 46 230 3420 Fax number: +81 46 230 3500 DESCRIPTION OF TEST ITEM Kind of equipment: Wireless LAN Condition of equipment: Prototype Type: Combination type of Table-top and Wall-hanging Trademark: MITSUMI FCC ID: EW4DWLA001 Model number: Wavit 11 Wireless LAN (DWL-A001) Serial number: 001 TEST PERFORMED Location: Kashima No. 3 Test Site (FCC File No. : 31040/SIT) EUT received: January 17, 2002 Test started: January 17, 2002 Test completed: January 22, 2002 Purpose of test: FCC Docket 87−389 and Canadian Interference Causing Equipment Regulations Regulation: FCC Part15B Class B and Canada ICES−003 Class B Unintentional Radiators Test setup: ANSI C63.4−1992 Report issue date: May 31, 2002 Test engineer: Koji Setoguchi Report approved by: Junichi Okada Note a. The test result of this report is effective for equipment under test itself and under the test configuration described on the report. b. This test report does not assure that whether the test result taken in other testing laboratory is compatible or reproducible to the test result on this report or not. c. This test report shall not be reproduced except in full, without issuer’s permission. Akzo Nobel Report No. ANKK−102012FCC ID : EW4DWLA001Page 5 of 24 (Version 5.2) SECTION 2. CONCLUSION This test report clearly shows that the EUT is in compliance with the FCC Part 15B Class B and Canada ICES −003 Class B specification. Traceability to national standards of test result is achieved by means of calibration traceability to national standards. The minimum margins to the limits are as follows: Conducted Voltages on Mains Port Rx mode (Pole Ant., 1ch. 11Mbps)16.6 dBat3.1492 MHz Radiated Electric Field Rx mode (Pole Ant., 1ch. 11Mbps)5.3 dBat901.82 MHz Note : See Section 9 for details. Akzo Nobel Report No. ANKK−102012FCC ID : EW4DWLA001Page 6 of 24 (Version 5.2) SECTION 3. EQUIPMENT UNDER TEST The equipment under test (EUT) consisted of the following equipment. Indication in the following left side column corresponds to Section 6. Symbol ItemModel No. SerialFCC ID / DoC ManufacturerRemarks A) Wireless LANWavit 11 Wireless LAN (DWL-A001) 001EW4DWLA001 MITSUMI ELECTRIC CO., LTD. B) AC AdaptorR2087NoneN.A.MITSUMI ELECTRIC CO., LTD. Power ratings of EUT : [Wireless LAN] DC 5V, 0.6 A [AC Adaptor] Input : AC 100-120V, 50-60 Hz, 0.28 A Output : DC 5V, 1.6 A DoC : Device for Declaration of Conformity 3.1 Port(s)/Connector(s) : Port nameConnector typeConnector pinRemarks 10 BASE-TRJ-458 pin 3.2 Oscillator(s)/Crystal(s) : OscillatorOperating frequency Board nameRemarks 44 MHz2132 - 2192 MHzRF BoardHighest Frequency 560 MHzRF Board 44 MHzMain Board 22 MHzMain Board 20 MHz20 MHzMain Board Akzo Nobel Report No. ANKK−102012FCC ID : EW4DWLA001Page 7 of 24 (Version 5.2) SECTION 4. SUPPORT EQUIPMENT USED The EUT was supported by the following equipment during the test. Indication in the following left side column corresponds to Section 6. Symbol ItemModel No.Serial No. FCC ID / DoC ManufacturerRemarks C) ComputerDCMSNT4Z97028DELL D) CRT DisplayD1726T-HS2000176AK8GDM17SE2T DELL E) KeyboardSK-1000REW M97082741GYUR36SKDELL F) Mouse90741…

Text truncated - open the document above for the full version.

ANTENNA SPECIFICATIONS 1. 2.4GHz Sleeve Antenna Electrical Specification Item Model NAME WK73201 Frequency Range 2400 to 2500 MHz Gain Max. 1dBi V.S.W.R Max.2.0 Impedance 50 ohms Dimension Operating Temperature -5 to +55 C Input Connector MXFG76 type (FSC Type for 76 cable) Antenna Manufacture WAKA MANUFACTURING CO.,LTD. 2.Internal Chip Antenna Electrical Specification Item Model NAME HAN8030B2R4GT-000 Frequency Range 2400 to 2485 MHz Gain -2.5 to +1.5 dBd V.S.W.R Max. 2.0 Impedance 50 ohms Dimension 8.0 x 3.0 x 1.2 mm Operating Temperature -25 to +70 C Input Connector Directly etched on PWB board Antenna Manufacture TDK Corporation

Akzo Nobel Report No. ANKK−102012FCC ID : EW4DWLA001Page 21 of 24 (Version 5.2) SECTION 10. PHOTOGRAPHS OF MAXIMUM EMISSION SET−UP 10.1 Conducted Voltages on Mains Port Test setup in accordance with ANSI C63.4−1992 Front viewSide view 10.2 Radiated Electric Field Test setup in accordance with ANSI C63.4−1992 Front viewRear view Note : Maintaining 10cm spacing between all the equipment cabinets.