FC3L32112GAMPBooster Amp

PUBLIC SAFEY VISLINK News and Entertainment Overview The L3211 Barrel Booster has been specifically tailored for wireless camera back applications. Designed to fit directly onto the RF output from the Link range of transmitters, this unit is small, lightweight and easy to use. This amplifier includes ALC (Automatic Level Control) in order to provide a constant RF output power for all transmitter power level settings. The L3211 has a wide DC operating range (9-28V) and can be powered via the RF input connector* or using the Lemo power cables supplied with the unit. These power cables allow the option to connect to the Lemo power socket on the wireless transmitter or to the D-Tap adaptor from an IDX or Anton Bauer battery plate. Incorporating LDPD (Link Digital Pre-Distortion) for improved adjacent channel rejection, integral harmonic filtering and a power save mode this amplifier is a must have addition to any wireless camera system where extended range is required. * Switchable phantom power to the L3211 barrel booster is provide in the L1530-1927 RF module. L3211 Barrel Booster Barrel Booster Features • Boosts RF transmitter power for extended range. • Provides optimal trade-off between transmit power, DC power consumption and spectral efficiency. • Small, light-weight & robust construction. • Designed to mate directly to the Link range of camera back transmitters. • Incorporates LDPD (Link Digital Pre-Distortion) for improved adjacent channel rejection. • Includes input and output RF harmonic filters to ensure regulatory compliance. • ALC (Automatic Level Control) maintains a constant RF output for all transmitter settings. • Can also be operated as a fixed gain power amplifier for user defined RF output powers. • RF output fully protected against mis-match damage. • Powered via RF input connector or external Lemo connector. • Power save mode when RF muted. • Wide DC (9-28V) operating range. • Tri-colour LED indicates unit status and RF output mode setting. www.vislink.com © 2011 Vislink Group. All rights reserved. All other products or services referenced herein are identified by the trademarks or service marks of their respective companies or organizations. Note: Vislink reserves the right to change specifications without notice. Please contact your representative to confirm current specifications. Document 10 / 7 / 2011 Specifications Electrical At 20±5°C ambient ParameterConditionsMinTypMaxUnitsComment Frequency RangeL3211-20272000–2700MHz L3211-6475 6400 - 7500 MHzDoes not include LDPD RF Output PowerALC Mode+28 (0.63)28.75(0.75)+30 (1.0)dBm (W) RF Input Power RangeALC Mode+10 (10)–+24 (250)dBm (mW) GainFixed Gain Mode10–15dB Spectral RegrowthAdjacent Channel––-40dBcEN 302 064-1 §7.3.4 Alternate Channe––-46 Spurious25MHz – 1GHz––0.25(-36)nW(dBm)EN 302 064-1 §7.4.6 1GHz – 27GHz––1(-30) Return Loss–10–dB RF Input Damage Level CW+27 (0.5)dBm (W) Pulsed +36 (4) Static ProtectionDirect Discharge8kVIEC61000-4-2 Air Discharge15 Temperature RiseAbove Ambient32ºCIEC60417-5041 Supply Voltage928V Power ConsumptionRF OFF7.5W RF ON14W Compliance StandardClass/CategoryVersion ETSI EN 302 064-1Category 1V1.1.2 ETSI EN 301 489-28Class BV1.1.1 Environmental Operating Temperature (Portable Equipment) • -10°C to +50°C Storage Temperature • -20°C to +80°C Humidity • 95% • Non-Condensing IP Rating • 54 Mechanical RF/DC Input Connector • 50Ω N Type (M) RF Output Connector • 50Ω N Type (F) Power Connector • 6-Pin Lemo Socket Phantom Power • Applied to RF Input Connector Weight • 0.32Kg Length • 106mm (inc. connectors) Diameter • 62mm Status Indicator • Green (DC Power/ALC OK) • Orange (DC Power OK/Fixed Gain) Power Connector 6-Pin Lemo Socket L3211 Socket • EEG.OB.306 CLV Mating Plug • FGG.0B.306 CLA (straight) • FHG.0B.306 CLA (right-angle) Pin Out • 1 & 2: GND, 3 & 4: +VE, 5 & 6: NC Note: When operating the barrel booster in the ‘Fixed Gain’ mode the RF output power is no longer controlled by the barrel booster’s ALC and therefore it is the operator’s responsibility to ensure that the RF drive into the barrel booster is at an appropriate level not to cause over-drive or damage and to maintain regulatory compliance. Hot surface, do not touch barrel booster heat sink surface during operation. The barrel booster is supplied with 2 complimentary power cables from the options listed below PN:9003434Barrel Booster ALC Power Cable (Lemo straight) Pn:9003435Barrel Booster ALC Power Cable (IDX D-TAP) Pn:9003437Barrel Booster ALC Power Cable (Anton Bauer P-TAP) Pn:9003438Barrel Booster ALC Power Cable (Lemo right-angle)

P A G E 1 4 O F 2 0 V I S L I N K – A PP L I C A L T I O N F O R C E R T I F I C A T I O N – F C 3 L 3 2 1 12 G A MP S E C T I O N 4 B T R AN S M I T T E R P H O T O S

P A G E 1 5 O F 2 0 V I S L I N K – A PP L I C A L T I O N F O R C E R T I F I C A T I O N – F C 3 L 3 2 1 12 G A MP FC C L AB E L LO C AT IO N

A Division of Vislink, Inc. Microwave Radio Communications 101 Billerica Avenue, Bldg 6 N. Billerica, MA 01862-1256 USA Tel: +1-978-671-5700 Fax: +1-978-671-5800 Web: www.mrcbroadcast.com October 23, 2013 L3211 Booster Amp Internal Photos A Division of Vislink, Inc.

P A G E 1 3 O F 2 0 V I S L I N K – A PP L I C A L T I O N F O R C E R T I F I C A T I O N – F C 3 L 3 2 1 12 G A MP SECTION 4 TRANSMITTER DESCRIPTION The L3211 Barrel Booster has been specifically tailored for wireless camera back applications. Designed to fit directly onto the RF output from the Link range of transmitters, this unit is small, lightweight and easy to use. This amplifier includes ALC (Automatic Level Control) in order to provide a constant RF output power for all transmitter power level settings. The L3211 has a wide DC operating range (9-28V) and can be powered via the RF input connector* or using the Lemo power cables supplied with the unit. These power cables allow the option to connect to the Lemo power socket on the wireless transmitter or to the D-Tap adaptor from an IDX or Anton Bauer battery plate.

Pending VersionHistoric Versions Engineering Changes AX UKM AX USM Event Log SpecificationHistory Sheet Where Used Product Data Manager. Copyright © 2013 Vislink. All Rights Reserved. PARTREV DESCRIPTIONSTATUS 9002212 3 L3211-2027 Barrel Booster 2.0-2.7GHzOfficial Parts List Line# Component Rev DescriptionQtyUnitsRoHSProduction State 90021503Booster Amplifier 2.0-2.7GHz ASSY1EachCompliant Prototype 90022104Barrel Booster Base1EachCompliant Prototype 90022112Barrel Booster Lid1EachCompliant Prototype 90022131O-ring Conductive 17.17 ID x 1.78 DIA2EachCompliant Prototype 90022141Light pipe Clear Panel Mount 12.7mm1EachCompliant Prototype 90022172Barrel Booster 2.0-2.7GHz Product Label1EachCompliant Prototype 90023811CONN N Type Plug 4-Flange Solder1EachCompliant Prototype 90032071Caution Hot Surface Label 12.5mm (250 per pack)0.004 PackCompliant Prototype 90033141SCREW M2 X 16 PAN TORX SS BLK6EachCompliant Prototype 90034651CONN Lemo 0B Blanking Cap (Black)1EachCompliant Prototype CL10011102Gasket RFI Ring OD 1.52mm0.43MetersCompliant Production Ready CL10024101N-Type Jack Panel Mount1EachCompliant Prototype CL10125901Sleeve Heatshrink Black 19mm OD 2:10.005 MetersCompliant Prototype CL10203801Adhesive Membrane Vent HPM 7.6x3.3mm1EachCompliant Prototype CL10216501SCREW M3 X 6 PAN TORX SS8EachCompliant Prototype CL10226401Dowel Pin 1.5x5mm Stainless Steel2EachCompliant Prototype CL10284001SCREW M2 X 6 PAN TORX SS1EachCompliant Prototype CL11078802L1500 SERIAL No LABEL1EachUnknown Prototype 18 records found. Official Version Parts List Page 1 of 1Part 9002212 Parts List 8/1/2013http://pdm.vislink.com/parts/partslist.aspx?part=9002212

1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 DD CC BB AA Date:Rev:Copyright (c) Drawn By:Sheet Document No. of Sheet: A3 02/12/20119002153_3.SchDoc SJ Rossek13 9002153 3 DateRevInitialsChange History * * * * * * * * * * * * Title:COFDM ALC Amplifier 2.0-2.7GHz Vislink Communications Ltd 27 Maylands Avenue Hemel Hempstead HP2 7DE Variant:[No Variations] LDPDS LDPDI LDPDO DELAYI DELAYO LDPD_SHDN U_Booster 1 Booster 2.0-2.7GHz.SchDoc LDPDS LDPDI LDPDO DELAYI DELAYO LDPD_SHDN U_Pre-Distortion Pre-Distortion.SchDoc 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 DD CC BB AA Date:Rev:Copyright (c) Drawn By:Sheet Document No. of Sheet: A3 15/12/2011Booster 2.0-2.7GHz.SchDoc SJ Rossek23 9002153 3 DateRevInitialsChange History * * * * * * * * * * * * Title:COFDM ALC Amplifier 2.0-2.7GHz Vislink Communications Ltd 27 Maylands Avenue Hemel Hempstead HP2 7DE Variant:[No Variations] 100nC7 0402ESDA D5 0 R5 0 R4 +5.5V VIN DNF R17 AD8531AKS 1 2 + 3 - 4 5 U9 3.3nL7 ALM-38140 RF1 1 V S 2 RF2 3 V C 4 L O 5 L I 6 G N D 7 U5 4.7u C41 +5.5V R E D G R N D3 LT6700IDCB-1 OUTA 1 OUTB 2 VS 3 -INB 4 GND 5 +INA 6 G N D 7 U6 DNF C86 TPD6V8LP D4 i RF50 i RF50 i RF50 i RF50 iPWR iPWR iPWR i RF50 i RF50 i RF50 i RF50 i RF50 i RF50XC2500E-03S IN 1 TERM 2 0 3 90 4 GND 5 T2 1.0n L2 +5.5V 1.0n L10 +5.5V +5.5V LTM8025 VIN J1 VIN J2 VIN J3 VIN K1 VIN K2 GND A5 GND F1 GND C7 GND C6 GND C5 GND B7 GND B6 GND B5 GND A7 GND A6 GND E1 GND D7 GND D6 GND D5 GND F4 GND F3 GND F2 GND F6 GND E7 GND E6 GND E5 GND E4 GND E3 GND E2 VOUT B4 VOUT B3 VOUT B2 VOUT B1 VOUT A4 VOUT A3 VOUT A2 VOUT A1 RUN/SS L5 BIAS H5 AUX G5 VOUT C4 VOUT C3 VOUT C2 VOUT C1 PGOOD J7 SYNC L6 SHARE H7 RT G7 ADJ K7 VIN K3 VIN L1 VIN L2 VIN L3 VOUT D4 VOUT D3 VOUT D2 VOUT D1 GND F5 GND F7 GND G1 GND G4 GND G3 GND G2 GND H6 GND G6 GND J5 GND J6 GND K5 GND K6 GND L7 U2 0 R12 100u C4 82.5K R50 82.5K R18 LTC4412HV VIN 1 GND 2 CTL 3 STAT 4 GATE 5 SENSE 6 U12 1 2 8 7 FDMA530PZ 3 4 5 6 Q2 1 2 8 7 FDMA530PZ 3 4 5 6 Q1 470K R34 VAGC VAGC +5.5V 49.9 R28 i RF50 i PWR i PWR i PWR 27.3n L19 +5.5V ADL5500 VRMS A1 GND B1 RFIN B2 VPOS A2 U8 10K R8 1u C1 +3.0V TP1 100pC8 10p C28 10p C29 10p C30 10p C31 i RF50 33n L13 49.9 R24 10p C35 100nC33 100n C50 10p C51 10p C13 10p C24 100nC12 100n C19 10p C22 10p C23 2.2pC14 2.2pC36 2.4p C9 2.4p C32 0 R43 600 L12600 L14 600 L15 600 L17 600 L9 600 L3600 L4 600 L5 0 R20 0 R49 0 R25 10pC37 0 R2 10K R9 0 R13 0 R3 100nC5 VIN RFin = +10 to +24dBm Vc=+1 to +5V (+5V min. atten) +30dBm+31dBm +28.5dBm +28.5dBm +10dBm 0dBm ~+1V 100 R31 100 R35 VH=1.6V VL=0.5V 10K R39 8.06K R33 23.2K R36 GREEN=PWR&RF OK ORANGE=PWR OK RF HIGH/LOW CP0402A-FL I N 1 C P 2 O U T 4 I S O 3 T4 49.9 R16 LDPDS -10dBm 49.9 R38 CP0402A-CL IN 1 CP 2 OUT 4 ISO 3 T9 49.9 R42 LDPDI LDPDO iRF50 iRF50 -5dBm -4.5dBm -4.5dBm -1dBm DC2337J5020AHF IN 1 OUT 6 CP 2 GND 3 ISO 5 GND 4 T3 1 N-TYPE (F) J2 1 N-TYPE (M) J1 DELAYI DELAYO 10KR11 100nC34 100n C40 100nC21 100nC43 C2327J5003AHF IN 1 90 6 GND 2 ISO 3 GND 5 0 4 T1 C2327J5003AHF IN 1 90 6 GND 2 ISO 3 GND 5 0 4 T5 -8.5dBm -8.5dBm -4.0dBm i RF50 -4.5dBm 100 R65 100 R26 DNF R66 DNF R67 0 R64 LDPD_SHDN 600L11 600 L16 0 R63 10u C3 10u C52 1uC6 30VWD2 30VWD1 0R10 600L39 600L41 100n C80 ADP150ACBZ-3.0 IN A1 EN B1 GND B2 OUT A2 U1 4.7u C39 600 L38 4.7u C79 0 R7 +5.5V+3.0V9 to 28V 68 R32 82.5KR15 0 R27 DNF R30 DNF R29 1.6p C26 MGA-43228 N/C 1 N/C 2 N/C 3 RFIN 4 N/C 5 N/C 6 VBYP 7 V C 1 8 V C 2 9 V C 3 1 0 N / C 1 1 V B I A S 1 2 N / C 1 3 V D E T 1 4 N/C 15 N/C 16 RFOUT 17 RFOUT 18 RFOUT 19 N/C 20 N/C 21 V D D 3 2 2 V D D 3 2 3 V D D 3 2 4 N / C 2 5 V D D 2 2 6 G N D 2 7 V D D 1 2 8 G N D 2 9 U4 MGA-43228 N/C 1 N/C 2 N/C 3 RFIN 4 N/C 5 N/C 6 VBYP 7 V C 1 8 V C 2 9 V C 3 1 0 N / C 1 1 V B I A S 1 2 N / C 1 3 V D E T 1 4 N/C 15 N/C 16 RFOUT 17 RFOUT 18 RFOUT 19 N/C 20 N/C 21 V D D 3 2 2 V D D 3 2 3 V D D 3 2 4 N / C 2 5 V D D 2 2 6 G N D 2 7 V D D 1 2 8 G N D 2 9 U7 2.7p C46 2.7p C17 1.5p C16 1.5p C45 0.3pC83 0.3pC82 301 R1 301 R6 31.6K R46 31.6K R48 31.6K R21 31.6K R23 25.5K R22 25.5K R47 2400MHz G N D 1 N C 2 G N D 3 I/O 4 G N D 5 N C 6 G N D 7 I/O 8 X1 4.7u C81 4.7u C84 +5.5V 100nC85 10K R41 +5.5V +5.5V FG_MODE VFG VFG 1.0p C25 FG_MODE 120 L45 120 L44 DNF C48 120 L20 BAT54LP D8 DNF C18 DNF C44 2.0p C20 2.0p C38 1.0pC88 2.2nL43 2.2n L42 2.4nL47 1.0pC87 2.4nL46 600L48 60 L49 EEG.0B.306.CLV 4 1 2 3 5 6 J3 D N F R 4 5 120 L50 LDPD_SHDN DISABLE/RESET LDPD WHEN RF HIGH/LOW/OFF L D P D _ S H D N DNF R62 TS5A12301E NO A1 GND B1 NC C1 IN A2 V+ C2 COM B2 U14 1.3A (NO RF) 2.3A (RF) 6.8uL1 ADP151ACBZ-1.8 IN A1 EN B1 GND B2 OUT A2 U13 1.9mA 100 R14 0.9p C27 2.7nL8 Fixed AGC @1.6V MGA-43228 Gain=37dB NF=2.1dB OP1dB=+35.5dBm Iq=500mA 2450LP15A050 Loss=0.5dB Rej>25dB Harmonic LPF Loss=0.5dB Rej>30dB ALM-38140 Loss=3.5 - 30dB IP1dB=+32dBm IIP3=+50dBm Current=2.5mA Control=20.5mA ADL550 RFin=+8 to -20dBm Gain=4.5V/Vrms Current=6mA DC2337J Loss=0.15dB CP=20dB Dir=17dB Idd1=50mA Idd2=180mA Idd3=270mA Ibias=16.5mA XC2500E-03S Loss<0.15dB Iso>22dB CP0402A-FL Loss=0.25dB CP=20dB Dir=11dB CP0402A-CL Loss=0.5dB CP=15dB Dir=30dB C2327J5003AHF Loss=3.3dB Iso=22dB C2327J5003AHF Loss=3.3dB Iso=22dB LMT8025 EFF=90.4% RF ON=14W RF OFF=9W PIC101PIC102 COC1 PIC301 PIC302 COC3 PIC401 PIC402 COC4 PIC501PIC502 COC5 PIC601PIC602 COC6 PIC701PIC702 COC7 PIC801PIC802 COC8 PIC901PIC902 COC9 PIC1201PIC1202 COC12 PIC1301PIC1302 COC13 PIC1401PIC1402 COC14 PIC1601 PIC1602 COC16 PIC1701 PIC1702 COC17 PIC1801 PIC1802 COC18 PIC1901 PIC1902 COC19 PIC2001 PIC2002 COC20 PIC2101PIC2102 COC21 PIC2201PIC2202 COC22 PIC2301PIC2302 COC23 PIC2401 PIC2402 COC24 PIC2501 PIC2502 COC25 PIC2601 PIC2602 COC26 PIC2701 PIC2702 COC27 PIC2801PIC2802 COC28 PIC2901PIC2902 COC29 PIC3001PIC3002 COC30 PIC3101PIC3102 COC31 PIC3201PIC3202 COC32 PIC3301PIC3302 COC33 PIC3401PIC3402 COC34 PIC3501PIC3502 COC35 PIC3601PIC3602 COC36 PIC3701PIC3702 COC37 PIC3801 PIC3802 COC38 PIC3901 PIC3902 COC39 PIC4001 PIC4002 COC40 PIC4101 PIC4102 COC41 PIC4301PIC4302 COC43 PIC4401 PIC4402 COC44 PIC4501 PIC4502 COC45 PIC4601 PIC4602 COC46 PIC4801 PIC4802 COC48 PIC5001 PI…

Text truncated - open the document above for the full version.

P A G E 1 O F 2 0 V I S L I N K – A PP L I C A L T I O N F O R C E R T I F I C A T I O N – F C 3 L 3 2 1 12 G A MP TEST REPORT MOBILE MICROWAVE BOOSTER AMP FCC ID: FC3L32112GAMP MODEL: L3211-2027 APPLICANT: VISLINK, Inc. August 1, 2013 P A G E 2 O F 2 0 V I S L I N K – A PP L I C A L T I O N F O R C E R T I F I C A T I O N – F C 3 L 3 2 1 12 G A MP TABLE OF CONTENTS Section 1 INTRODUCTION 3 APPLICATION 4 TECHNICAL DATA SUMMARY 5 TECHNICAL DISCRIPTION EMISSIONS DESIGNATORS 5 Section 2 MEASUREMENTS 6 - 12 RF Power Output – 2.1046 Modulation Characteristics – 2.1047 Occupied Bandwidth – 2.1049 Spurious Emissions at Antenna Terminals – 2.1051 Field Strength of Spurious Radiation – 2.1053 Frequency Stability – 2.1055 Section 3 QUALITY DECLARATION 12 Section 4 TRANSMITTER DESCRIPTIONS / PHOTOS 13 - 15 Section 5 RADIO CHARACTERISTICS 16 Section 6 TEST EQUIPMENT 17 Section 7 MPE CALCULATIONS 18 - 19 Section 8 TEST FACILITIES 20 P A G E 3 O F 2 0 V I S L I N K – A PP L I C A L T I O N F O R C E R T I F I C A T I O N – F C 3 L 3 2 1 12 G A MP S E CTIO N 1 I NT RO DU CTIO N GENERAL INFORMATION – 2.1033 Applicant: Vislink, Inc. 101 Billerica Avenue, Building 6 North Billerica, MA 01862 Tel. 978-671-5700 Attn: Sal Blatti, Compliance Manager FCC ID: FC3L32112GAMP Installation and Operating Manual: User and Technical Manual Equipment Description: Mobile Video Booster Amp – see below Block Diagram: See Technical Description, below Equipment model: L3211-2027 Frequency Range: 2000 – 2700 MHz FCC Part numbers: § 74; subpart F: 74.602 (a)(1), (a)(2), (a)(3). Rated RF Power: 1W (+30dBm) Frequency Tolerance: 0.0005 % Emission Designators: 12M00D7W The data provided in this document will show that the Vislink/Microwave Radio Communications L3211-2027 booster amp is in compliance with 47 CFR Parts 74, for use by eligible Broadcast Auxiliary, Operational Fixed Point- to-Point Radio Service licensees in the 2000 – 2700 MHz mobile band as provided for in the relevant FCC part number referenced above. Radiated emission tests were conducted by Curtis-Straus a Bureau Veritas Company in their laboratory facility in Littleton, MA, while the part 74 emission testing was conducted in the Vislink/Microwave Radio Communications facility in North Billerica, MA. The L3211-2027 was designed to comply with applicable technical regulations of § 74 subpart F, for the transmission of video, audio, and data by a mobile transmitter. Typical applications may include surveillance, command center operations, emergency restoration, broadcast remote and news gathering, cable TV remote and news gathering, or other video, voice and data requirements as deemed necessary and appropriate for a specific task assignment. P A G E 4 O F 2 0 V I S L I N K – A PP L I C A L T I O N F O R C E R T I F I C A T I O N – F C 3 L 3 2 1 12 G A MP Technical Description: The L3211-2027 FC3L32112GAMP is a compact booster amp designed to be adaptable to a wide range of field applications. The booster amp accepts a low power RF signal for portable transmitter and amplifies this signal to the desired RF output in accordance with § 74 subpart F operating band from 2000 to 2700MHz at an RF power level of +30dBm. The specific operating frequency is determined by a high stability wide band VCO in the low power portable transmitter. The VCO set-up voltage is controlled by a microprocessor that is factory programmed to provide channel plans in accordance with the rules as specified in § 74; subpart F: 74.602 (a)(1), (a)(2), (a)(3). Channel Center Frequency (MHz) 1 2031.500 2 2043.500 3 2055.500 4 2067.500 5 2079.500 6 2091.500 7 2103.500 8 2458.500 9 2475.250 10 2491.750 Table 1 - HDX-1100C3 Factory channel plan center frequencies P A G E 5 O F 2 0 V I S L I N K – A PP L I C A L T I O N F O R C E R T I F I C A T I O N – F C 3 L 3 2 1 12 G A MP S E CTIO N 2 - ME AS URE ME N TS TECHNICAL DATA SUMMARY Frequency band: Operating frequency range is 2000 – 2700 MHz Licensed for: Broadcast Auxiliary Service under CFR 47 part § 74; subpart F: 74.602 (a)(1), (a)(2), (a)(3). Maximum measured output power@ antenna port: + 30dBm (1.0 Watt) FCC ID: FC3L32112GAMP Equipment Description: Mobile Video Booster Amp Equipment model: L3211-2027 Frequency Tolerance: 0.0005 % Emission Designator: 12M00D7W RF Power Output Measurement per 2.1046 Applicable specifications: 12 Watts (+ 40.8dBm) per §74.638(a) The RF power measured at 12MHz channels, as required for this application, is shown below: Frequency (MHz) Transmit Power Conducted (part 74) Channel Bandwidth 2031.5 28.54dBm 12 MHz 2043.5 28.61dBm 12 MHz 2055.5 28.59dBm 12 MHz 2067.5 28.48dBm 12 MHz 2079.5 28.53dBm 12 MHz 2091.5 28.47dBm 12 MHz 2103.5 28.50dBm 12 MHz 2458.5 28.62dBm 12 MHz 2475.25 28.65dBm 12 MHz 2491.75 28.73dBm 12 MHz Table 2 – Power measurement Figure 1 - Test Setup for Power Measurements EUT Power Meter Spectrum Analyzer A Coupler P A G E 6 O F 2 0 V I S L I N K – A PP L I C A L T I O N F O R C E R T I F I C A T I O N – F C 3 L 3 2 1 12 G A MP S E CTIO N 2 A – M O DU L AT IO N C H AR AC TE RIS TI CS P E R 2 .1 0 4 7 Measurement Frequency: 2103.0 MHz Data: The unit under test is designed to be modulated by a combination of digital video, audio, and auxiliary data. The COFDM modulated spectrum shown in the image below shows compliance with the 8 MHz pedestal option in the DVB-T standard for the 2K carrier mode, per ETSI EN 300 744 V1.51. These carriers may be modulated in QPSK, 16QAM, or 64 QAM formats with no change in occupied bandwidth, as the symbol rate is fixed to maintain the same bandwidth. P A G E 7 O F 2 0 V I S L I N K – A PP L I C A L T I O N F O R C E R T I F I C A T I O N – F C 3 L 3 2 1 12 G A MP S E C T I O N 2 B - O C C U P I E D B AN D W I D T H 2 . 1 0 4 9 To measure the occupied bandwidth, the equipment was set up as shown below, and the transmitter was modulated with a digital COFDM pedestal of 7.61MHz (8MHz). The output of the transmitter was viewed on a spectrum analyzer. The current COFDM standa…

Text truncated - open the document above for the full version.

Curtis-Straus LLC is accredited by the American Association for Laboratory Accreditation for the specific scope of accreditation under Certificate Number 1627-01. This report may contain data which is not covered by the A2LA accreditation. ____________________________________________________________ LLC  Curtis-Straus LLC, a wholly owned subsidiary of BV CPS One Distribution Center Circle, #1  Littleton, MA  TEL (978) 486-8880  FAX (978) 486-8828 page 1 of 20 Test Report Curtis-Straus LLC, a wholly owned subsidiary of BV CPS Report No EM1580-1 Client Microwave Radio Communications LLC Sal Blatti Address 101 Billerica Ave. Building 6 North Billerica, MA 01862 Phone 1-978-671-5720 Items tested Wireless camera transmitter with barrel booster Standards CFR 47 FCC Part 15 Subpart B Test Dates July 13, 2012 Results As detailed within this report Prepared by Karl Klemm – Test Engineer Authorized by Stacey Costa – EMC Project Manager Issue Date 9/20/2012 Conditions of Issue This Test Report is issued subject to the conditions stated in the ‘Conditions of Testing’ section on page 19 of this report. Test Report for Microwave Radio Communications LLC  Report No. EM1580-1 July 23, 2012 ______________________________________________________________________ ____________________________________________________________ Curtis-Straus LLC, a wholly owned subsidiary of BV CPS One Distribution Center Circle, #1  Littleton, MA  TEL (978) 486-8880  FAX (978) 486-8828 page 2 of 20 Contents Contents .................................................................................................................................... 2 Summary ................................................................................................................................... 3 Product Tested .......................................................................................................................... 4 Configuration Documentation ................................................................................................ 4 Compliance Statement .............................................................................................................. 5 Modifications Required for Compliance ..................................................................................... 5 RADIATED EMISSIONS ........................................................................................................... 6 CONDUCTED EMISSIONS .................................................................................................... 14 Measurement Uncertainty ....................................................................................................... 15 Jurisdictional Labeling and Required Instruction Manual Inserts ............................................ 16 FCC Requirements .............................................................................................................. 16 Conditions Of Testing .............................................................................................................. 19 REV 28-MAR-12 (KK) Test Report for Microwave Radio Communications LLC  Report No. EM1580-1 July 23, 2012 ______________________________________________________________________ Issue No. Reason for change Date Issued 1 Ori ginal Release July 23, 2012 _____________________________________________________________ Curtis-Straus LLC, a wholly owned subsidiary of BV CPS One Distribution Center Circle, #1  Littleton, MA  TEL (978) 486-8880  FAX (978) 486-8828 page 3 of 20 Summary On July 13, 2012 we tested the Wireless camera transmitter with barrel booster for compliance with the following requirements: EMC Emissions:  CFR 47 FCC Part 15 Subpart B Class A emissions requirements (USA) We found that the product met the above requirements without modification. Sal Blatti from Microwave Radio Communications LLC was present during the testing. The test sample was received in good condition. The sample was received on July 13, 2012. Test Report for Microwave Radio Communications LLC  Report No. EM1580-1 July 23, 2012 ______________________________________________________________________ _____________________________________________________________ Curtis-Straus LLC, a wholly owned subsidiary of BV CPS One Distribution Center Circle, #1  Littleton, MA  TEL (978) 486-8880  FAX (978) 486-8828 page 4 of 20 Product Tested Configuration Documentation EUT Configuration Work Order:M1580 Company:Microwave Radio Communications LLC Company Address: 101 Billerica Ave. Building 6 North Billerica, MA 01862 Contact:Sal Blatti Person Present:Sal Blatti MNPNSN Barrel Booster: L3211-2027---319414 Camera Transmitter:L1500HD-NEDEMO---8118044 EUT Description:Wireless camera transmitter with barrel booster EUT Max Fre quency: 128MHz Support Equipment:MNSN none EUT Ports: Port LabelPort TypeNo. of ports No. PopulatedCable TypeShieldedFerritesLength Max Length In/Out NEBS TypeUnpopulated Reason Barrel Booster powerdc power11custom 4-pinyesnone1ft1ftoutdoor Camera Transmitter 10-18Vbooster power11custom 4-pinyesnone1ft1ftoutdoor A1Lanalog audio11XLRyesnone1m100moutdoor A1Ranalog audio11XLRyesnone1m100moutdoor A2dc power11custom 4-pinyesnone1m100moutdoor DATAdata11custom 4-pinyesnone1m100moutdoor Y/CVcomponent video11coaxyesnone1m100moutdoor SDIdigital video11coaxyesnone1m100moutdoor ASI INanalog video11coaxyesnone1m100moutdoor ASI OUTanalog video11coaxyesnone1m100moutdoor Pbcomponent video11coaxyesnone1m100moutdoor Prcomponent video11coaxyesnone1m100moutdoor Battery terminalsbattery power11N/AN/AN/AN/AN/AN/Adirect connection Camera terminalsbattery power11N/AN/AN/AN/AN/AN/Adirect connection Software / Operating Mode Description: EUT is continously transmitting colorbars. Test Report for Microwave Radio Communications LLC  Report No. EM1580-1 July 23, 2012 ______________________________________________________________________ _____________________________________________________________ Curtis-Strau…

Text truncated - open the document above for the full version.