FC3NST2G7GMicrowave Mobile Transmitter

Multi-mode Mobile Transmit System User and Technical Manual Manual Part No. RD001358 Rev. 004, February, 2015 Page 2 NewStream User Guide and Technical Manual Copyright © 2015 Part number RD001358 Printed in U.S.A. Authorized EU representative: Vislink PLC Quality Certifi cation Vislink is certifi ed to ISO 9001:2008. The Vislink trademark and other trademarks are registered trademarks in the United States and/or other countries. Microsoft®, Windows ® , and Internet Explorer ® are registered trademarks of Microsoft Corporation in the United States and/or other countries. Proprietary Material The information and design contained within this manual was originated by and is the property of Vislink. Vislink reserves all patent proprietary design, manufacturing, reproduction use, and sales rights thereto, and to any articles disclosed therein, except to the extent rights are expressly granted to others. The foregoing does not apply to vendor proprietary parts. Vislink has made every effort to ensure the accuracy of the material contained in this manual at the time of printing. As specifi cations, equipment, and this manual are subject to change without notice, Vislink assumes no responsibility or liability whatsoever for any errors or inaccuracies that may appear in this manual or for any decisions based on its use. This manual is supplied for information purposes only and should not be construed as a commitment by Vislink. The information in this manual remains the property of Vislink and may not be used, disclosed, or reproduced in any form whatsoever, without the prior written consent of Vislink. Vislink reserves the right to make changes to equipment and specifi cations of the product described in this manual at any time without notice and without obligation to notify any person of such changes. General Safety Information The following safety requirements, as well as local site requirements and regulations, must be observed by personnel operating and maintaining the equipment covered by this manual to ensure awareness of potential hazards. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. A. The NewStream transmitter complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: [1] this device may not cause harmful interference, and [2] this device must accept any interference received, including interference that may cause undesired operation. About this Manual This manual is intended for use by qualifi ed operators, installers, and service personnel. Users of this manual should already be familiar with basic concepts of radio, video, and audio. For information about terms in this manual, see Glossary of Terms and Abbreviations [Part No. 400576-1]. Pay special attention to Notes, Cautions, and Warnings. Read NOTES for important information to assist you in using and maintaining the equipment Follow CAUTIONS to prevent damage to the equipment. Follow WARNINGS to prevent personal injury or death. Page 3 NewStream User Guide and Technical Manual Table of Contents Introduction ........................................................................................7 Features ............................................................................................................... 8 System Description ..........................................................................10 Operational Modes ............................................................................................ 11 Operating Controls ............................................................................................. 13 Connections ...................................................................................................... 16 IDU Local Operation ........................................................................17 Changing Presets .............................................................................................. 17 Preset Naming Using the Preset Display ...................................................... 18 Changing Channels ........................................................................................... 19 USB Interface..................................................................................................... 19 Ethernet Ports .................................................................................................... 19 IDU Information Touchscreen ............................................................................ 20 IDU Information .............................................................................................. 20 IDU Version ..................................................................................................... 21 Software Upgrade Process ................................................................................ 22 System Failure Recovery Process .................................................................... 22 Preset Export and Import ................................................................................... 23 Export Process ............................................................................................... 23 Import Process ................................................................................................ 24 Local Microwave Control ................................................................................... 26 ENG Stat…

Text truncated - open the document above for the full version.

MICRO\MATE RADIO VCOMMUNICATIONS A Division of Vislink, lnc. Microwave Radio Communications 101 Billerica Avenue, Bldg 6 N. Billerica, MA 01862-1256 USA April 29, zOLs To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046-1609 Vislink, Inc. 101 Billerica Ave, Bldg 6 Billerica, MA 01862 Re: ConfidentialityRequest This letter is to request long term confidentiality under 47 CFR O.457(d) (2), and in compliance with 47 CFR 0.459(bX5) and 0.459 (bX6) pettaining to confidential and proprietary information that would compromise our competitive position if revealed publically. Vislink lnc. / Microwave Radio Communications requests that the following documents regarding this submission for FCC ID FC3NST}GTG be kept confidential: 1. Schematics 2. Parts List The material above contains technical data, which would customarily be guarded from competitors. Sincerely, gaZrrA.-S#' Salvatore Blatti Manager of Compliance April 29, 2015 Tel: +'l-978-671-5700 Fax: +1-978-671-5800 Web: www.mrcbroadcast.com

A Division of Vislink, lnc. Microwave Radio Communications 101 Billerica Avenue, Bldg 6 N. Billerica, MA 01862-1256 USA April 29, 2Ot5 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046-1609 Evelyn Cherry Vislink, Inc. 101 Billerica Ave, Bldg 6 Billerica, MA 01862 Re: Correspondence Reference Number 46743 731 Confirmation Number EA1gZ2g3 This letter is in response to the correspondence number 46743 pertaining to the long confidentiality of internal photos for FC3NSTZGTG submitted - on March 25, 2015. After reviewing the criteria for confidentiality of internal photos Vislink has decided that the internal photos submitted for the FC3NST2GTG does not need to be kept confidential. A new confidentiality request letter has been submitted. fl-"99" note that payment for this certification has been submitted for the $885.00 processing fee. Sincerely, laAzfr-r*&fu%' Salvatore Blatti Manager of Compliance April 29,2OLs Tel: Fax: Web: +1-978-671-5700 +'t -978-671-5800 www.mrcbroadcast.com

P A G E 20 O F 27 V I S L I N K – A P P L I C A L T I O N F O R C E R T I F I C A T I O N – F C 3 N S T 2 G7 G NewStream ODU (Outdoor Unit) NewStream IDU (Indoor Unit) SECTION 4 TRANSMITTER PHOTOS FC3NST2G7G NewStream Transmitter Photo’s MANUFACTURERS PART # NST270T1CAJ3 External Front View P A G E 21 O F 27 V I S L I N K – A P P L I C A L T I O N F O R C E R T I F I C A T I O N – F C 3 N S T 2 G7 G NewStream IDU (Indoor Unit) NewStream ODU (Outdoor Unit) FC3NST2G7G NewStream Transmitter Photo’s MANUFACTURERS PART # NST270T1CAJ3 External Rear View

P A G E 22 O F 27 V I S L I N K – A P P L I C A L T I O N F O R C E R T I F I C A T I O N – F C 3 N S T 2 G7 G FC3NST2G7G NewStream Transmitter Photo’s MANUFACTURERS PART # NST270T1CAJ3 Label Information

FC3NST2G7G NewStream IDU Label Photo’s

P A G E 1 O F 27 V I S L I N K – A PP L I C A L T I O N F O R C E R T I F I C A T I O N – F C 3 N S T 2 G7 G TEST REPORT MOBILE MICROWAVE VIDEO TRANMITTER FCC ID: FC3NST2G7G MODEL: NST270T1CAJ3 APPLICANT: VISLINK, Inc. March 18, 2015 P A G E 2 O F 27 V I S L I N K – A PP L I C A L T I O N F O R C E R T I F I C A T I O N – F C 3 N S T 2 G7 G TABLE OF CONTENTS Section 1 INTRODUCTION 3 + 6 TECHNICAL DATA SUMMARY TECHNICAL DISCRIPTION EMISSIONS DESIGNATORS Section 2 MEASUREMENTS 7 + 18 RF Power Output – 2.1046 Modulation Characteristics – 2.1047 Occupied Bandwidth – 2.1049 Spurious Emissions at Antenna Terminals – 2.1051 Field Strength of Spurious Radiation – 2.1053 Frequency Stability – 2.1055 Section 3 QUALITY DECLARATION 19 NQA CERTIFICATE Fig.2 Section 4 TRANSMITTER DESCRIPTIONS / PHOTOS 20 + 22 Section 5 TEST STATION SETUP 23 + 24 Section 6 MPE CALCULATIONS 25 + 26 Section 7 TEST FACILITIES AND COMPLIANCE DIRECTIVE 27 P A G E 3 O F 27 V I S L I N K – A PP L I C A L T I O N F O R C E R T I F I C A T I O N – F C 3 N S T 2 G7 G SECTION 1 INTRODUCTION GENERAL INFORMATION – 2.1033 Applicant: Vislink, Inc. 101 Billerica Avenue, Building 6 North Billerica, MA 01862 Tel. 978+671+5700 Attn: Sal Blatti, Compliance Manager Email: [email protected] FCC ID: FC3NST2G7G Installation and Operating Manual: NewStream User and Technical Manual Equipment Description: Mobile Video Transmitter – see below Block Diagram: See Technical Description, below Equipment model: NST270T1CAJ3 Frequency Range (MHz): 2025 – 2500MHz and 6425 – 7125MHz Rated RF Power: 2025 – 2500MHz 8.0 Watts (+39 dBm) 6425 – 7125MHz 5.0 Watts (+37 dBm) FCC Part numbers: § 74; subpart F: 74.602(h)(4)(i)(1), (2), and (3). § 78; subpart D, 78.101, 78.102, 78.104, 78.111 §101; subpart H: 101.601 & 101.602 Frequency Tolerance: 0.0005% Emission Designators: 12M0D7W, 17M0D7W, 25M0D7W The data provided in this document will show that the Vislink/Microwave Radio Communications NewStream transmitter is in compliance with 47 CFR Parts 74, 78 and 101 for use by eligible Broadcast Auxiliary, CARS, and Private Operational Fixed Point+to+Point Radio Service licensees in the 2025 – 2500MHz and 6425 – 7125MHz mobile band as provided for in the relevant FCC part number referenced above. Radiated and EMC emission tests were conducted by Curtis+Straus a Bureau Veritas Company in their laboratory facility in Littleton, MA while the part 74, 78 and 101 emission testing was conducted in the Vislink/Microwave Radio Communications facility in North Billerica, MA. The NewStream was designed to comply with applicable technical regulations of § 74 subpart F, § 78 subpart D, and §101 subpart H for the transmission of video, audio, and data by a mobile transmitter. Typical applications may include surveillance, command center operations, emergency restoration, broadcast remote and news gathering, cable TV remote and news gathering, or other video, voice and data requirements as deemed necessary and appropriate for a specific task assignment. P A G E 4 O F 27 V I S L I N K – A PP L I C A L T I O N F O R C E R T I F I C A T I O N – F C 3 N S T 2 G7 G Technical Description: The NewStream FC3NST2G7G is a 2+box, mobile transmitter, designed to be adaptable to a wide range of field applications; particularly those requiring ruggedized, vehicular mounted equipment. The transmitter accepts a wide range of SMPTE based video input signals, including HD+SDI, SDI, ASI, and NTSC. Raw video, audio, and data are delivered to an integral Encoder which feeds a COFDM+DVB+T modulator, operating in the 2K carrier mode. The I and Q outputs of the COFDM modulator intermediate frequency are supplied to a RF unit where the IF signal is up+ converted to the operating band of 2025 + 2500 MHz or 6425 + 7125 MHz and amplified to the factory set limit to meet the requirements of part§ 74 and § 78 or 5W for part § 101. Block Diagram: System Controller Encoder & COFDM Modulator Front Panel DC Distribution Power Supply IF AGC / FSK Module NewStream IDU VAC Video Audio ASI IF / FSKIF TX Upconverter NewStream RF ODU 2GHz RF IF IF AGC / FSK Module IF / FSK IF / RF Module 2GHz PA 7GHz PA 7GHz RF 2GHz RF 7GHz RF IF LO P A G E 5 O F 27 V I S L I N K – A PP L I C A L T I O N F O R C E R T I F I C A T I O N – F C 3 N S T 2 G7 G Frequency Plans: The specific operating frequency is determined by a high stability wide band VCO. The VCO set+up voltage is controlled by a microprocessor that is factory programmed to provide channel plans in accordance with the rules as specified in part §74, 78, or 101. Channel 2GHz Center Frequency (MHz) 7GHz Center Frequency (MHz) 1 2031.500 6887.500 2 2043.500 6912.500 3 2055.500 6937.500 4 2067.500 6962.500 5 2079.500 6987.500 6 2091.500 7012.500 7 2103.500 7037.500 8 2458.500 7062.500 9 2475.250 7087.500 10 2491.750 7112.500 11 6437.500 12 6462.500 13 6487.500 14 6512.500 Table 1 – NewStream Factory channel plan center frequencies P A G E 6 O F 27 V I S L I N K – A PP L I C A L T I O N F O R C E R T I F I C A T I O N – F C 3 N S T 2 G7 G SPECIFICATIONS RF OUTDOOR UNIT (ODU): • RF Connector input: Type N female (950MHz) • RF Connectors output: Type N female (2 and 7GHz) • Impedance: 50 Ohms • Return loss: 17 dB minimum (output) • Output stability: ± 1.0 dB, + 20 o to + 55 o C • Harmonics: ≤ 60 dBc • PA protection: Capable of operation into infinite VSWR, no time limit. • Frequency Step Size: 250 KHz • Frequency Stability: .0005% • RF power output: 8W@ 2GHz and 5W@ 7GHz • Input Power: 48VDC • Input Power connector: 12P Cannon INDOOR UNIT (IDU): • Input Power: 90 to 240VAC • Power Consumption: 2A • IF Connector Out: Type N female (950MHz) • Input signals: o SDI Video o Composite Video o ASI o Analog Audio o Digital Audio • Monitor Ports: o ASI o L+band NOTE: Additional details are in the User and Technical Manual, attached to this report. P A G E 7 O F 27 V I S L I N K – A PP L I C A L T I O N F O R C E R T I F I C A T I O N – F C 3 N S T 2 G7 G SECTION 2 ME ASUREMENTS TEC…

Text truncated - open the document above for the full version.