
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
__________________________________________________________________________________________________ ืืืงืืจืื ืืงื ืชืขืฉืืืช ืืืจื)1994 (ืืข"ืจ ื"ื ืืฆืืจืฃ 5 ืืืืื 58856ืื :03-5562775ืคืงืก :03-5561944 5 HATZOREF ST. HOLON 58856 ISRAEL, PHONE: 972-3--5562775, FAX: 972-3-5561944 ELECTRONIC IND. LTD. WPK 215 User Manual WPK 215 transmitter is a part of the Amber Basic PERS system. The device can be worn as a pendant or a wrist watch. For getting HELP, push once the button and the device would transmit to the Amber Basic main unit. The Amber basic would contact the control center. The FCC Wants You to Know This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: a) Reorient or relocate the receiving antenna. b) Increase the separation between the equipment and receiver. c) Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. d) Consult the dealer or an experienced radio/TV technician. FCC Warning Modifications not expressly approved by the manufacturer could void the user authority to operate the equipment under FCC Rules.
Block Diagram Block Diagram Controller Transmitter Antenna Matching Circuit Push Button
7 May 2007 To: The Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID : Pursuant to Sections 0.457 and 0.459 of the Commissionโs Rules, we hereby request confidential treatment of information accompanying this application as outlined below: WPK 215 BOM Confidential PartsLst.pdf WPK 215 Confidential Schem.pdf. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Thank you Arick Elshtein International standards Manager
External Photographs of Tested E.U.T. Figure 1 Top View Figure 2 Bottom View
Location of Label on EUT Location of Label
Internal Photographs of Tested E.U.T. Figure 1 Bottom Cover Internal View Figure 2 Top Cover Internal View Figure 3 PCB In Case With Batteries Figure 4 PCB In Case Without Batteries Figure 5 PCB Component Side Figure 6 PCB Print Side
Theory of Operation The heart of the unit is the oscillator driven by a 433.92 MHz resonator. Upon sensing the push button, the controller sends the on-off keying to the transmitter. The information contains the transmitter id code and the battery condition bit.
Cert. No. 1152.01 Electrical (EMC) Test Report E71720.01 Visonic Inc. Page 1 of 35 FCC ACC M Ver 1.1 05Mayl 2000 DATE: 24 May 2007 I.T.L. (PRODUCT TESTING) LTD. FCC EMC/Radio Test Report for Visonic Inc. Equipment under test: Panic Watch WPK 215 Written by: _____________________________ D. Shidlowsky, Documentation Approved by: _____________________________ E. Pitt, Test Engineer Approved by: _____________________________ I. Raz, EMC Laboratory Manager This report must not be reproduced, except in full, without the written permission of I.T.L. (Product Testing) Ltd. This report relates only to items tested. Cert. No. 1152.01 Electrical (EMC) Test Report E71720.01 Visonic Inc. Page 2 of 35 FCC ACC M Ver 1.1 05Mayl 2000 Measurement/Technical Report for Visonic Inc. Panic Watch WPK 215 FCC ID: GSAWPK250 24 May 2007 This report concerns: Original Grant x Class II change Class B verification Class A verification Class I change Equipment type: Part 15 Security/Remote Control Transmitter Request Issue of Grant: x Immediately upon completion of review Limits used: CISPR 22 Part 15 x Measurement procedure used is ANSI C63.4-2003. Application for Certification Applicant for this device: prepared by: (different from "prepared by") Ishaishou Raz Shelly Bloch ITL (Product Testing) Ltd. Visonic Inc. Kfar Bin Nun 30 Habarzel St. D.N. Shimshon 99780 Tel-Aviv 69710 Israel Israel e-mail [email protected] Tel: +972-3 -645-6789 Fax: +972-3-645-6788 e-mail: [email protected] Test Report E71720.00 Visonic Inc. Page 3 of 35 FCC ACC M Ver 1.1 05Mayl 2000 TABLE OF CONTENTS 1. GENERAL INFORMATION ------------------------------------------------------------------------------- 4 1.1 Administrative Information.................................................................................4 1.2 List of Accreditations .........................................................................................5 1.3 Product Description ...........................................................................................6 1.4 Test Methodology..............................................................................................6 1.5 Test Facility .......................................................................................................6 1.6 Measurement Uncertainty .................................................................................6 2. PRODUCT LABELING ------------------------------------------------------------------------------------ 7 3. SYSTEM TEST CONFIGURATION--------------------------------------------------------------------- 8 3.1 Justification........................................................................................................8 3.2 EUT Exercise Software .....................................................................................8 3.3 Special Accessories ..........................................................................................8 3.4 Equipment Modifications ...................................................................................8 3.5 Configuration of Tested System ........................................................................8 4. BLOCK DIAGRAM------------------------------------------------------------------------------------------ 9 4.1 Schematic Block/Connection Diagram..............................................................9 4.2 Theory of Operation ..........................................................................................9 5. FIELD STRENGTH OF FUNDAMENTAL ------------------------------------------------------------11 5.1 Test Specification ............................................................................................11 5.2 Test Procedure................................................................................................11 5.3 Measured Data................................................................................................11 5.4 Test Instrumentation Used, Field Strength of Fundamental ...........................14 6. RADIATED MEASUREMENT TEST SET-UP PHOTO -------------------------------------------15 7. SPURIOUS RADIATED EMISSION -------------------------------------------------------------------16 7.1 Test Specification ............................................................................................16 7.2 Test Procedure................................................................................................16 7.3 Test Data .........................................................................................................17 7.4 Test Instrumentation Used, Radiated Measurements ....................................22 8. BANDWIDTH ------------------------------------------------------------------------------------------------23 8.1 Test procedure ................................................................................................23 8.2 Results table....................................................................................................24 8.3 Test Equipment Used......................................................................................25 9. RADIATED EMISSION TEST DATA PER FCC PART 15, SUB-PART B -------------------26 9.1 Test Specification ............................................................................................26 9.2 Test Procedure................................................................................................26 9.3 Test Data .........................................................................................................27 9.4 Test Instrumentation Used, Radiated Measurements ....................................28 10. PHOTOGRAPHS OF TESTED E.U.T. ----------------------------------------------------------------29 11. APPENDIX A - CORRECTION FACTORS ----------------------------------------------------------33 11.1 Correction factors for CABLE .......................................................................33 11.2 Correction factors for Biconilog Antenโฆ
Text truncated - open the document above for the full version.
I.T.L (PRODUCT TESTING) Ltd. HEAD OFFICE, SAFETY & TELECOMS LABS. EMC LABORATORY 1 Batsheva St. POB: 87 Kfar Bin Nun 99780 Lod 71100 ISRAEL ISRAEL Tel. 972-8-915300 Tel. 972-8-9797799 Fax. 972-8-915301 Fax. 972-8-9797702 Email: [email protected], Web Site: http://www.itl.co.il To: Timco Engineering Inc. From: Shaike Raz Att: Reviewing Engineer Reference No: L71720.00 Date: 28 May 2007 Subject: Duty Cycle Plot for WPK 215 FCC ID: GSAWPK250 To Whom it May Concern, The attached Visonic response concerning the Duty cycle plot is based on an analysis, since implementation of the actual worst case condition for a plot was not practical. Regards Shaike Raz EMC Laboratory Manager EMC Laboratory ITL (Product Testing) Ltd. Kfar Bin Nun Israel Tel: +972-8-9797799 Fax: +972-8-9797702 Email: [email protected] http://www.itl.co.il
Test Set-up Photo Figure 1. Radiated Emission Test
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15.231 | 433.958 MHz - 433.958 MHz | - |

Infant Protection Bracelet
Equipment Class
DSC - Part 15 Security/Remote Control Transmitter
LF Exciter
Equipment Class
DCD - Part 15 Low Power Transmitter Below 1705 kHz
Dual-Technology Microwave/PIR Intrusion Detector
Equipment Class
FDS - Part 15 Field Disturbance Sensor
Supervised Indoor Wireless CO Gas Detector
Equipment Class
DSC - Part 15 Security/Remote Control Transmitter
Security Control Panel
Equipment Class
DSR - Part 15 Remote Control/Security Device Transceiver