GTC202150TXRThermostat

Global Leader in Integrated Room Automation Systems Confidential Copyright © 2010 INNCOM e528 Smart Digital Thermostat Product Guide Overview INNCOM's e4 Smart Digital Thermostat is a powerful, multi-purpose Direct Digital Control (DDC) device that can control virtually any HVAC system found in hotel guestrooms. The three e4 models meet different application requirements. The e528 and e527 are wired and are typically used for new installation. The e529 is battery-powered and is designed to meet the needs of existing properties where rewiring is not practicable. This document describes Model e528; information on the e529 and e527 can be found in their respective product guides. Application In its most basic form, the e528 functions as a programmable DDC thermostat, automatically adjusting fan speeds and valves to achieve set temperature (Note: Guests can manually select heat or cool by pressing the OFF/AUTO button and cycling through OFF, AUTO, HEAT and COOL). The e528 is also an “intelligent” device capable of linking ancillary sensors and serving as an information gateway. For example, coupled with a magnetic door switch (wired or wireless), motion detectors, and other devices, the e528 becomes the brain of a highly effective Energy Management System (EMS) application, communicating EMS information requirements to central servers. It comes standard with five relays and can be equipped with an on- board Infrared (IR) or radio frequency (RF) transceiver and Passive Infrared (PIR) motion detector. The e528 interfaces with all common HVAC unit voltage configurations (24 volt to 277 volt). The e528 can be installed in a wired or wireless INNCOM guestroom control system, which makes installation feasible and affordable in either new construction or retrofit installations. Through interfaces with other devices and sensors, the e528 supports the following functions: • Remote HVAC control • Guestroom HVAC diagnostics • Remote room occupancy indication • Automatic lighting control • Remote mini-bar access reporting • Remote smoke detector annunciation • Central Electronic Lock control • Humidity control • Remote drape control • Outside temperature display • Peak demand load shedding • Property/Building Management System (PMS/BMS) interface Figure 1 e528 Digital Thermostat E 5 2 8 P r o d u c t G u i d e P a g e 2 o f 1 8 A centrally controlled EMS package is created when the e528 is connected to the property's Central Interface Network (CINET) with a pair of low voltage wires or by the property’s high-speed TCP/IP network with the addition of a TCT (an Ethernet gateway device). RF networking is possible with radio equipped models. The e528 features a guest-friendly graphic interface with intuitive controls (Figure 2). A user guide for the e528, written primarily for installers and facility management personnel, is available (see References below). Wireless Communication 2.4Ghz wireless RF Table 1 e528 RF Characteristics Performance 0dB 20dB RF Data Rate 250kbps 250kbps Antenna Type SMT SMT Indoor Range 70ft 100ft Outdoor/ RF line-of-sight range 540ft 1000ft+ Transmit Power 1mW 10mW Receive Sensitivity -94.6dBm -94.6dBm Frequency Band 2.4Ghz 2.4Ghz Encryption AES-128 AES-128 Protocol 802.15.4 802.15.4 Frequency Channels 11-26 11-26 Ranges are determined by performing an RF link quality test using two identical e528 thermostats containing radios as defined in tables 2 and 3. The maximum distance threshold is based on a 95% overall link quality. Outdoor ranges were conducted in a low noise, free air environment. Indoor ranges are for reference. Indoor ranges are impacted by the ambient environmental noise floor, and building construction materials. Figure 2 e528 Graphic Interface E 5 2 8 P r o d u c t G u i d e P a g e 3 o f 1 8 IR5 (Infrared) Table 2 e528 IR5 Characteristics Performance IR5 Indoor Range Up to 80ft IR Data Rate 2500 bps The IR Eye5 works within INNCOM's System-5 protocol and can be used in a fluorescent light environment. However, it may be subject to interference from plasma televisions, and care must be taken in situating the device if a plasma television is present. Installation Requirements Location: The e528 must be located on a partitioning interior wall, approximately 1.5 m (5 ft) above the floor, in a site of average temperature. It is important to ensure that the thermostat is located away from direct sunlight or radiant heat, air discharge grills, stairwells, outside doors, steam or water pipes, warm air stacks, unheated/uncooled areas, or sources of electrical or radio interference. The unit should not be placed on an outside wall or behind a door. It is essential that the e4 is mounted flush to the wall and mounted level in both the horizontal and vertical planes; incorrect mounting can degrade IR, PIR, and temperature measurement performance. Installation Requirements for e4 equipped with PIR Motion Detection The e4 thermostat can be equipped with a PIR detector to augment the energy management scheme by detecting motion in the guestroom. Consider the PIR’s view angle, range characteristics, and mounting position to ensure proper coverage. Figure 3 below shows the ranges of the flat and standard PIRs. Flat PIR Detection Range (Single Pyro) Standard PIR Detection Range (Dual Pyro) Figure 3 PIR Detection Ranges E 5 2 8 P r o d u c t G u i d e P a g e 4 o f 1 8 Mounting: The e528 is usually mounted on a standard double-gang (4 x 4) junction box. If mounted on a single- gang box, the left side (display side) of the e528 overlaps the wall area to the left of the junction box. A low- voltage mounting plate, mud ring, or low-voltage caddy may be used for mounting 24 volt applications. To mount the e528: 1) Remove the two small screws at the base of the e528. 2) Pull the bottom of the back-mounting plate slightly away from the front housing and then pull the back- mounting plate down. 3) Position the back plate insulator within the mounting plate as shown in Figure 4. 4) Attach…

Text truncated - open the document above for the full version.

12/27/2012 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046-1609 Curtis-Straus LLC TCB One Distribution Center Circle, #1 Littleton, MA 0 1460 Re: Confidentiality Request Gentlemen: This letter is to comply with 47 CFR 0.457(d)(2) pertaining to confidential material. INNCOM International Inc. requests that the following documents regarding this submission for FCC ID GTC202150TXR be kept confidential: 1. Schematics 2. Block Diagram 3. Circuit/Technical Description The material above contains technical data, which would customarily be guarded from competitors. Pursuant to Public Notice DA 04-1705, Inncom requests SHORT-TERM CONFIDENTIALITY for the following information until 180 days after the grant date of equipment authorization in order to ensure sensitive business information remains confidential until marketing of the device: External Photos Internal Photos Test Setup Photos User’s Manual Sincerely, Ryan Gardner Director of New Product Development 12/27/2012

Agent’s Authorization Letter 12/27/2012 I, an officer of INNCOM, do hereb y authorize, until further notice, Mairaj Hussain of Curtis-Straus LLC, One Distribution Center Circle, #1, Littleton, MA 01460, to act on our behalf in dealings before the Federal Communications Commission with respect to all matters relating to equipment authorizations under 47 CFR. This authorization includes, but is not limited to, the signing of Form 731. I certify that no party (as defined in 47 CFR 1.2002) to this application, including myself, is subject to a denial of federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C., 853A. Certified By: __________________ R yan Gardner Director of New Product Development 12/27/2012

Curtis-Straus LLC is accredited by the American Association for Laboratory Accreditation for the specific scope of accreditation under Certificate Number 1627-01. This report may contain data which is not covered by the A2LA accreditation. ____________________________________________________________ Curtis-Straus LLC, a wholly owned subsidiary of BV CPS One Distribution Center Circle, #1 • •• • Littleton, MA • •• • TEL (978) 486-8880 • •• • FAX (978) 486-8828 page 1 of 17 Test Report Curtis-Straus LLC, a wholly owned subsidiary of BV CPS Report No EM1798-1 Client Inncom Ryan Gardner Address 277 West Main Street Niantic, CT 06357 Phone 860-739-4468 Items tested E528.4G Thermostat FCC ID GTC202150TXR IC ID 1609A-202150TXR FRN 0017924150 Equipment Type Low Power Communication Device Transmitter Equipment Code DXX Emission Designator 2M41F7D Standards 47CFR 15.249, RSS 210 Issue 8 and RSS GEN Issue 3 Test Dates March 26, 28 and April 27, 2012 Results As detailed within this report Prepared by Chris Reynolds – Test Engineer Authorized by Mairaj Hussain – EMC Supervisor Issue Date 12/20/12 Conditions of Issue This Test Report is issued subject to the conditions stated in the ‘Conditions of Testing’ section on page 16 of this report. Test Report for Inncom • •• • Report No. EM1798-1 December 19, 2012 ______________________________________________________________________ ____________________________________________________________ Curtis-Straus LLC, a wholly owned subsidiary of BV CPS One Distribution Center Circle, #1 • •• • Littleton, MA • •• • TEL (978) 486-8880 • FAX (978) 486-8828 page 2 of 17 Contents Contents..................................................................................................................................2 Product Tested - Configuration Documentation .......................................................................3 Summary.................................................................................................................................4 Test Methodology ................................................................................................................4 Compliance Statement ............................................................................................................5 Test Results ............................................................................................................................6 Duty Cycle Correction Factor (DCCF) ..................................................................................6 Fundamental Measurements................................................................................................8 Radiated Spurious Emissions............................................................................................10 AC Line Conducted Emissions...........................................................................................13 Occupied Bandwidth..........................................................................................................14 Measurement Uncertainty......................................................................................................15 Conditions Of Testing ............................................................................................................16 Form Final Report REV 2-16-07 (DW) Test Report for Inncom • •• • Report No. EM1798-1 December 19, 2012 ______________________________________________________________________ _____________________________________________________________ Curtis-Straus LLC, a wholly owned subsidiary of BV CPS One Distribution Center Circle, #1 • •• • Littleton, MA • •• • TEL (978) 486-8880 • •• • FAX (978) 486-8828 page 3 of 17 Product Tested - Configuration Documentation EUT Configuration Work Order:M1798 Company:Inncom Company Address: 277 West Main Street Niantic, CT 06357 Contact: Ryan Gardner Person Present:Ryan Gardner MNPNSN EUT: 01-9911202-150Sample 1 EUT Description:Wireless Networking Thermostat EUT Max Frequency: 32MHz EUT Min Frequency: 8MHz EUT Tx Frequency: 2405-2480MHz Support Equipment: MNSN KDS Monitor786NFBUL41215569U Dell KeyboardSK-8110CN-07N242-71616-47L-0CK; Dell MouseM-S34LNA10103513 Dell PCHFMJM51CN-0C3152-70821-47K-5CFW B574 Network Controller01-9437B574P12RF0A0 K595 Motion Detector202-595Sample 1 EUT Ports: Port LabelPort TypeNo. of ports No. PopulatedCable TypeShieldedFerritesLength Max Length In/Out NEBS TypeUnpopulated Reason H7Auxiliary Power and Communication 113-wirenonone1m10mindoor H3External Humidity Sensor 113-wirenonone1m10mindoor H6Diagnostics10setup only H5Legacy Port10not used in this configuration H4DC Power118 pin conductornonone1"1"indoor H8Motion Detector113-wirenonone1"1"indoor H9IR Sensor10not used in this configuration AC mainsAC mains113-wire ACnonone1mN/Aindoor H1Serial10setup only Software / Operating Mode Description: Performance Criteria: EUT is wirelessly transmitting temperature readings. There shall be no loss of wireless transmission as indicated by the ZB link. Test Report for Inncom • •• • Report No. EM1798-1 December 19, 2012 ______________________________________________________________________ _____________________________________________________________ Curtis-Straus LLC, a wholly owned subsidiary of BV CPS One Distribution Center Circle, #1 • •• • Littleton, MA • •• • TEL (978) 486-8880 • •• • FAX (978) 486-8828 page 4 of 17 Summary This test report supports an application for certification of a transmitter operating pursuant to 47 CFR 15.249, RSS GEN Issue 3, and RSS-210, Issue 8. The product is the E528.4G (MN: 01- 9911) 0dB Thermostat. It is a transmitter that operates in the range 2400 – 2483.5 MHz. Product was tested with AC power supply PS564. AC mains conducted emissions were performed on AC side of the power supply. The test sample was received in good condition. Test Methodology Radiated emission and AC Line conducted testing was performed according to the procedures specified in ANSI C63.4 (2003) and RS…

Text truncated - open the document above for the full version.

Radiated Emissions - Front View Radiated Emissions – Rear View AC Conducted Emissions – Front View AC Conducted Emissions – Rear View