GTC202517TXRMotion Sensor

K595 Motion Sensor Datasheet Overview The K595 wall mounted passive infrared (PIR) motion detector (Figure 1) adds occupancy sensing and peripheral-status reporting capability to INNCOM integrated guestroom control systems. The K595 is designed with a sleek screwless design that has the same look and feel as the INNCOM MODEVA system. The K595 can be a key participant in an INNCOM Integrated Room Automation System (IRAS) Deep Mesh network. The K595, in conjunction with auxiliary input, a room controller, and an in- room communication network, helps determine guestroom occupancy. Occupancy sensing leads to better management of energy usage and security; extends heating, ventilation, and air conditioning equipment life; enhances the overall operating efficiency of the hotel; and improves guest satisfaction. The K595 can also monitor and report on the status (e.g., open/closed) of other devices within the guestroom (see Application below). Features • 120° view angle • Flush screwless magnetic mounting • Easy installation • No maintenance • Long battery life • 2.4Ghz IEEE 802.15.4 compliant RF transceiver (CC2430 radio core) • FCC Part 15b listed Application The K595 microprocessor-controlled PIR detects motion in a guestroom and reports it to the room controller. Combined with information from other inputs (such as a lanai or window switch or a minibar), guestroom occupancy can be determined and used for energy control or lighting decisions. Occupancy information may also be signaled to Housekeeping using the corridor doorbell display or a floor-level terminal. The K595 can provide an audit trail for Security, and it can be networked to the hotel’s central server. On power up, the K595 will flash the LED for approximately two seconds as it configures itself using settings in nonvolatile memory (see table below) and transmits a beacon frame (SAC_ALARM_K594_REPORT). The K595 will then go into Operation Mode, where it checks the auxiliary input, the motion detector, and the Bind switch status. The K595 will process any actions instigated by those checks; after that (or if there is no action), it will enter a low-power state (Sleep Mode) to conserve battery power. (See also the uCBL Engineering Manual.) The K595 can also act as a minibar server if the I/O Map is so programmed. For details, see the uCBL Engineering Manual, Sec. 2.4.2. Factory Default NVM Configuration. Figure 1 K595 K5 9 5 Da t a s he e t P a ge | 2 Description Value Room ID 65535 RF Channel 26 TX Power 0x5F (0dB) P5 Address 189 P5 Channel 1 I/O Map 255 Installation The individual guestroom design determines the K595’s installation location. Placement should provide maximum room coverage by the PIR motion detector while maintaining RF communication between the device and the e4 thermostat. Ideally, the K595 should be positioned on a wall in opposition to entrances and interior doors (8ft. high, 0° angle, 0° pitch). The K595 PIR lens is pitched at a downward angle of 60° for optimal range and minimized blind area below the unit. It should be positioned to view both the guestroom entry door and the bed areas. The K595 should be mounted within operational range of the e4 thermostat and any other devices it may communicate with. Avoid possible sources of radio interference such as metallic boxes, WiFi access points, microwave ovens, water pipes, and the like. Refer to the K595 Installation Manual for detailed installation instruction. Commissioning Refer to the K595 Installation Manual or the uCBL Engineering Manual for commissioning instructions. K5 9 5 Da t a s he e t P a ge | 3 K595 PIR Range Chart: Figure 2 K595 PIR Range Table 1 K595 Range and View Angle Data Angle Distance (Feet) Distance (Meters) -60° 27ft 9.0m -45° 27ft 9.0m 0° 33ft 11m +45° 28.5ft 9.5m +60° 33ft 11m K5 9 5 Da t a s he e t P a ge | 4 Operational Coverage for K595 Figure 3 K595 Coverage K5 9 5 Da t a s he e t P a ge | 5 PIR Specification Parameter K595 No. of Fresnel beams 27 No. of curtain beams 9 + 5 Max. coverage See Figure 2 Sensitivity 0.5m–12m (1.64-40 ft.) RF Specification Parameter K595 RF Data Rate 250kbps Antenna Type SMT Indoor Range 70ft Transmit Power 1mW (+0dBm) Receive Sensitivity -94.6dBm Frequency Band 2.4Ghz Encryption AES-128 Protocol 802.15.4 Frequency Channels 11-26 Technical Specification Parameter K595 Input voltage 4xAA Batteries Battery Life 2.2 years Operating temperature 0 °C to 60 °C (32 °F to 140 °F) Storage temperature -20 °C to 60 °C (-4 °F to 140 °F) Headers and Connectors Header Connector H1 Digital Input H2 ICP H3 Battery Input Safety/Regulatory Parameter Condition Status FCC Part 15b This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. Deleted: H2 K5 9 5 Da t a s he e t P a ge | 6 - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause unde…

Text truncated - open the document above for the full version.

12/27/2012 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046-1609 Curtis-Straus LLC TCB One Distribution Center Circle, #1 Littleton, MA 0 1460 Re: Confidentiality Request Gentlemen: This letter is to comply with 47 CFR 0.457(d)(2) pertaining to confidential material. INNCOM International Inc. requests that the following documents regarding this submission for FCC ID GTC202517TXR be kept confidential: 1. Schematics 2. Block Diagram 3. Circuit/Technical Description The material above contains technical data, which would customarily be guarded from competitors. Pursuant to Public Notice DA 04-1705, Inncom requests SHORT-TERM CONFIDENTIALITY for the following information until 180 days after the grant date of equipment authorization in order to ensure sensitive business information remains confidential until marketing of the device: External Photos Internal Photos Test Setup Photos User’s Manual Sincerely, Ryan Gardner Director of New Product Development 12/27/2012

Agent’s Authorization Letter 12/27/2012 I, an officer of INNCOM, do hereb y authorize, until further notice, Mairaj Hussain of Curtis-Straus LLC, One Distribution Center Circle, #1, Littleton, MA 01460, to act on our behalf in dealings before the Federal Communications Commission with respect to all matters relating to equipment authorizations under 47 CFR. This authorization includes, but is not limited to, the signing of Form 731. I certify that no party (as defined in 47 CFR 1.2002) to this application, including myself, is subject to a denial of federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C., 853A. Certified By: __________________ R yan Gardner Director of New Product Development 12/27/2012

K595 Battery Powered Motion S e n s or Model: 2 0 1 - 5 95 201-595 . __ _ . _ __

Curtis-Straus LLC is accredited by the American Association for Laboratory Accreditation for the specific scope of accreditation under Certificate Number 1627-01. This report may contain data which is not covered by the A2LA accreditation. ____________________________________________________________ Curtis-Straus LLC, a wholly owned subsidiary of BV CPS One Distribution Center Circle, #1 • •• • Littleton, MA • •• • TEL (978) 486-8880 • •• • FAX (978) 486-8828 page 1 of 23 Test Report Curtis-Straus LLC, a wholly owned subsidiary of BV CPS Report No EM1799-2 Client Inncom Address 277 West Main Street Niantic, CT 06357 Phone 860-739-4468 Items tested K595 RF Motion Sensor FCC ID GTC202517TXR IC ID 1609A-202517TXR FRN 0017924150 Equipment Type Digital Transmission System Equipment Code DXX Emission Designator 2M41F7D FCC/IC Rule Parts 47 CFR 15.249, RSS 210 issue 8 and RSS GEN issue 3 Test Dates July 18, 19, 27, 2012, and November 16, 2012 Results As detailed within this report Prepared by Christopher Reynolds – Test Engineer Authorized by Mairaj Hussain – EMC Supervisor Issue Date 12/28/2012 Conditions of Issue This Test Report is issued subject to the conditions stated in the ‘Conditions of Testing’ section on page 22 of this report. Test Report for Inncom • •• • Report No. EM1799-2 February 20, 2013 ______________________________________________________________________ ____________________________________________________________ Curtis-Straus LLC, a wholly owned subsidiary of BV CPS One Distribution Center Circle, #1 • •• • Littleton, MA • •• • TEL (978) 486-8880 • FAX (978) 486-8828 page 2 of 23 Contents Contents..................................................................................................................................2 Summary.................................................................................................................................3 Test Methodology ....................................................................................................................3 Product Tested - Configuration Documentation .......................................................................4 Statement of Conformity ..........................................................................................................5 Modifications Required for Compliance ...................................................................................5 Peak Power .............................................................................................................................6 Duty Cycle Correction Calculation ...........................................................................................9 Radiated Spurious Emissions ................................................................................................11 AC Line Conducted Emissions ..............................................................................................15 Occupied Bandwidth..............................................................................................................16 Measurement Uncertainty......................................................................................................19 Product Documentation .........................................................................................................21 Product Documentation .........................................................................................................21 Conditions Of Testing ............................................................................................................22 Form Final Report REV 7-20-07 (DW) Test Report for Inncom • •• • Report No. EM1799-2 February 20, 2013 ______________________________________________________________________ Release Control Record Issue No. Reason for change Date Issued 1 Original Release February 20, 2013 _____________________________________________________________ Curtis-Straus LLC, a wholly owned subsidiary of BV CPS One Distribution Center Circle, #1 • •• • Littleton, MA • •• • TEL (978) 486-8880 • •• • FAX (978) 486-8828 page 3 of 23 Summary This test report supports an application for certification of a transmitter operating pursuant to 47 CFR 15.249 and RSS-210. The product is the K595 RF Motion Sensor. It is a transmitter that operates in the range 2405-2480MHz We found that the product met the above requirements without modification The test sample was received in good condition. Test Methodology Radiated emission testing was performed according to the procedures specified in ANSI C63.4 (2003) and RSS-GEN. Radiated Emissions were maximized by rotating the device around three orthogonal axes as well as varying the test antenna’s height and polarity. The device antenna cannot be maximized separately. No AC mains conducted emissions testing was performed since product is battery operated. The EUT operating voltage is 6V DC. The following bandwidths were used during radiated spurious and line conducted emissions. Frequency RBW VBW 0.15-30MHz 9kHz 30kHz 30-1000MHz 120kHz 1MHz 1-25GHz 1MHz 3MHz Test Report for Inncom • •• • Report No. EM1799-2 February 20, 2013 ______________________________________________________________________ _____________________________________________________________ Curtis-Straus LLC, a wholly owned subsidiary of BV CPS One Distribution Center Circle, #1 • •• • Littleton, MA • •• • TEL (978) 486-8880 • •• • FAX (978) 486-8828 page 4 of 23 Product Tested - Configuration Documentation EUT Configuration Work Order: M1799 Company:Inncom Company Address: 277 West Main Street Niantic, CT 06357 Contact: Ryan Gardner Person Present: Ryan Gardner MNPNSN EUT:201-595---Sample 1 EUT Description: K595 RF Motion Sensor EUT Max Frequency: 8MHz EUT Tx Frequency: 2405-2480MHz Support Equipment:MNSN KDS Monitor786NFBUL41215569U Dell KeyboardSK-8110CN-07N242-71616-47L-0CK; Dell MouseM-S34LNA10103513 Dell PCHFMJM51CN-0C3152-70821-47K-5CFW B574 Network Controller01-9437B574P12RF0A0 EUT Ports: Po…

Text truncated - open the document above for the full version.