HN2-802CF13EEasyLAN

Intermec Technologies Corporation REPORT NO: 040804-1 EMC Test Laboratory DATE: Aug. 4, 2004 DOC. NO.: 577-501-204 Page 1 of 4 EasyLAN Wireless, CF Radio, FCC 15.247, Canada RSS-210, RSS-102 FCC ID: HN2-802CF13E APPENDIX I, User Information Technologies Corporation EMC Test Laboratory Cedar Rapids, IA MEASUREMENT/TECHNICAL REPORT Intermec Technologies Corporation EasyLAN® Wireless CF Radio 2.4 GHz Spread Spectrum Transmitter REPORT NO: 040804-1 DATE: Aug. 8, 2004 Appendix I USER INFORMATION Page 2 3400E Regulatory Compliance Information Insert Page 3 4420 Regulatory Compliance Information Insert Page 4 4440 Regulatory Compliance Information Insert 578-100-XXX Revision A Page 1 of 1 *578-100-XXXA* 578-100-XXXA Compliance Statement Insert Device Name: EasyCoder® Bar Code Label Printer Model Number: 3400E The responsible party for the compliance of this device is: Intermec Technologies Corporation 6001 36 th Avenue West Everett, WA 98203 USA (425) 348-2600 This product conforms to the following approvals. The user(s) of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The use of accessories other than those recommended, or changes to this product that are not approved by Intermec Technologies Corporation, may void the compliance of this product and may result in the loss of the user’s authority to operate the equipment. FCC Digital Emissions Compliance Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. CISPR Class A Statement Warning This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. NOTE: This device has been tested to the applicable European Norm as a radio frequency transmitter; letters of intent to market this product, as required under R&TTE Directive 1999/5/EC have been submitted. This device may contain the EasyLAN® Wireless CF Radio approved by the Federal Communications Commission under FCC ID: HN2-802CF13E and Industry Canada IC: 1223A-802CF13E WARNING: Per the FCC and IC radio frequency (RF) exposure requirements, (1) Antennas must be supplied and installed as recommended by Intermec Technologies Corporation to insure compliance to RF exposure requirements. The antennas approved for use are Intermec part numbers 072833-002, 063363-002 or 067262-001. Correct antenna mounting is fully described within the Intermec 3400E Quick Start Guide. (2) When installing and using Intermec approved remote antennas associated the EasyLAN® Wireless CF Radio, a 20-cm (8-inch) passing distance must be maintained from any body part of the user or nearby persons and the remote antenna. The antenna must not be touched during transmitter operation. (3) Cables attached to the remote antennas must have a minimum length as provided from Intermec to insure the proper losses to control RF exposure. (4) RF safety requirements mandate this device cannot be co-located with other transmitters. 578-100-XXX Revision A Page 1 of 1 *578-100-XXXA* 578-100-XXXA Compliance Statement Insert Device Name: EasyCoder® Bar Code Label Printer Model Number: 4420 The responsible party for the compliance of this device is: Intermec Technologies Corporation 6001 36 th Avenue West Everett, WA 98203 USA (425) 348-2600 This product conforms to the following approvals. The user(s) of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The use of accessories other than those recommended, or changes to this product that are not approved by Intermec Technologies Corporation, may void the compliance of this product and may result in the loss of the user’s authority to operate the equipment. FCC Digital Emissions Compliance Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. CISPR Class A Statement Warning This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. NOTE: This device has been tested to the applicable European Norm as a radio frequency transmitter; letters of intent to market this product, as required under R&TTE Directive 1999/5/EC have been submitted. This device may contain the EasyLAN® Wireless CF Radio approved by the Federal Communications Commission under FCC ID: HN2-802CF13E and Industry Canada IC: 1223A-802CF13E WARNING: Per the FCC and IC radio frequency (RF) exposure requirements, (1) Antennas must be supplied and installed as recommended by Intermec Technologies Corporation to insure compliance to RF exposure requirements. The antennas approved for use are Intermec part numbers 072833-002, 063363-002 or 067262-001. Correct antenna mounting is fully described within the Intermec 44…

Text truncated - open the document above for the full version.

Page 1 of 3 Date: October 24, 2004 ATTESTATION FOR MODULAR APPROVAL Ref FCC ID: HN2-802CF13E Telecommunication Certification Body (and/or) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mil a Road Columbia, Maryland 21046 Gentlemen; In order to obtain a modular transmitter approval, a cover letter requesting modular approval must be submitted and the 8 numbered requirements identified below must be addressed in the application for equipment authorization. 1. The modular transmitter must have its own RF shielding. This is intended to ensure that the module does not have to rely upon the shielding provided by the device into which it is installed in order for all modular transmitter emissions to comply with Part 15 limits. It is also intended to prevent coupling between the RF circuitry of the module and any wires or circuits in the device into which the module is installed. Such coupling may result in non-compliant operation. Intermec Technologies is provided the compact flash radio as a shielded assembly. The CF interface board with the radio is shown in this report reveals the transmitter emissions comply with the limits defined by the regulatory agencies. 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. The CF radio and interface board all operate using digital technology. The ActionTech radio buffering eliminates the ability to over-modulate the radio under all conditions. 3. The modular transmitter must have its own power supply regulation. This is intended to ensure that the module will comply with Part 15 requirements regardless of the design of the power supplying circuitry in the device into which the module is installed. The EasyLAN® Wireless CF radio interface board uses an onboard 3.3 volt regulator. The ActionTech 802CF13 radio is specified to operate in the 3.3v +/- 10% range which is standard for 3.3v technology. 4. The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). Any antenna used with the module must be approved with the module, either at the time of initial authorization or through a Class Systems and Solutions 550 Second St SE Cedar Rapids, IA 52401 Dave Fry MS GR05 EMC Engineer tel 319 846-2415 fax 319 846-2475 [email protected] Page 2 of 3 II permissive change. The “professional installation” provision of Section 15.203 may not be applied to modules. The antennas shown within this report as well as any additional antennas that are approved via a Class II permissive change will meet this requirement. The current antennas and connectors use the unique coupler and professional installation is not used for any antennas. 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in Section 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see Section 15.27(a)). The length of these lines shall be length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified or commercially available (see Section 15.31(i)). Testing herein shows the radio raised above and external of an Intermec Technologies printer. The setup photographs show no ferrites or decoupling devices to reduce emissions of the module. AC power line conducted emissions is shown within for the final product. Both printers represent the final installation of the radio when marketed by Intermec Technologies. 6. The modular transmitter must be labeled with its own FCC ID number, and, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: XYZMODEL1” or “Contains FCC ID: XYZMODEL1.” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. Enclosed within this report are label diagrams with similar verbiage shown above. The module will show the FCC ID. If when integrated the radio module identifier is not visible, the exterior will show the “Contains TX FCC ID:” text. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which c…

Text truncated - open the document above for the full version.

Date: October 27, 2004 CONFIDENTIALITY REQUEST CONTAINED WITHIN Telecommunication Certification Body (and/or) Federal Communications Commission Authorization and Evaluation Division And Industry Canada, Certification and Engineering Bureau Gentlemen Application: Intermec Technologies Corporation, 6001 36 th Ave W, Everett WA, 98203 herein submits: Application for Equipment Authorization and Exhibits for Original Certification of a Direct Sequence Spread Spectrum Transceiver FCC ID: HN2-802CF13E and Industry Canada IC: 1223A-802CF13E. The application enclosed requests limited modular approval with the appropriate attestation. The compact flash radio transmitter conducted characteristics are shown within the BABT report under FCC ID: EHA-802CF13. The CF radio is now integrated within a multi-function interface card to allow label printers to utilize the wireless LAN function. The testing of the module contains data for external antennas offered for sale when used with Intermec Technologies label printers. Confidentiality: Pursuant to Section 0.459 of the Commission's rules (CFR 47) and also directed to Industry Canada Certification and Engineering Bureau, Intermec requests confidentiality for portions of the material contained in this application and that the identified material be withheld from public inspection following the grant of this authorization. This material contains trade secrets and confidential information that is not customarily release to the public and which is otherwise not generally available to the pubic. Confidentiality is requested for the following exhibits: • schematics • block diagrams • theory of operation Description: This equipment is a DSSS radio module, which operates in the 2400-2483.5 MHz band. The radio operates as a 72 milli-watt transceiver used to enable wireless data exchange between Intermec label printers and wireless LANs connected mainframe control computers. Limited modular approval is requested to enable Intermec to integrate wireless communication within similar label printer products. Modular approval greatly reduces the regulatory approval burden for multiple products with essentially the same characteristics. Label printer models 3400e, 4420 and 4400 utilize the same power supply and control board, only physical size and number of print characters vary between these products. Chassis construction, materials and radio placement are identical. Contact Information: Please contact me by telephone at (319) 846-2415 or by e-mail ([email protected]) if there are questions or additional information needed concerning this filing. Sincerely, Dave Fry EMC Engineer Systems and Solutions 550 Second St SE Cedar Rapids, IA 52401 Dave Fry MS GR05 EMC Engineer tel 319 846-2415 fax 319 846-2475 [email protected]

Date: October 27, 2004 CONFIDENTIALITY REQUEST CONTAINED WITHIN Telecommunication Certification Body (and/or) Federal Communications Commission Authorization and Evaluation Division And Industry Canada, Certification and Engineering Bureau Gentlemen Application: Intermec Technologies Corporation, 6001 36 th Ave W, Everett WA, 98203 herein submits: Application for Equipment Authorization and Exhibits for Original Certification of a Direct Sequence Spread Spectrum Transceiver FCC ID: HN2-802CF13E and Industry Canada IC: 1223A-802CF13E. The application enclosed requests limited modular approval with the appropriate attestation. The compact flash radio transmitter conducted characteristics are shown within the BABT report under FCC ID: EHA-802CF13. The CF radio is now integrated within a multi-function interface card to allow label printers to utilize the wireless LAN function. The testing of the module contains data for external antennas offered for sale when used with Intermec Technologies label printers. Confidentiality: Pursuant to Section 0.459 of the Commission's rules (CFR 47) and also directed to Industry Canada Certification and Engineering Bureau, Intermec requests confidentiality for portions of the material contained in this application and that the identified material be withheld from public inspection following the grant of this authorization. This material contains trade secrets and confidential information that is not customarily release to the public and which is otherwise not generally available to the pubic. Confidentiality is requested for the following exhibits: • schematics • block diagrams • theory of operation Description: This equipment is a DSSS radio module, which operates in the 2400-2483.5 MHz band. The radio operates as a 72 milli-watt transceiver used to enable wireless data exchange between Intermec label printers and wireless LANs connected mainframe control computers. Limited modular approval is requested to enable Intermec to integrate wireless communication within similar label printer products. Modular approval greatly reduces the regulatory approval burden for multiple products with essentially the same characteristics. Label printer models 3400e, 4420 and 4400 utilize the same power supply and control board, only physical size and number of print characters vary between these products. Chassis construction, materials and radio placement are identical. Contact Information: Please contact me by telephone at (319) 846-2415 or by e-mail ([email protected]) if there are questions or additional information needed concerning this filing. Sincerely, Dave Fry EMC Engineer Systems and Solutions 550 Second St SE Cedar Rapids, IA 52401 Dave Fry MS GR05 EMC Engineer tel 319 846-2415 fax 319 846-2475 [email protected]

Northwest EMC TCB Compliance Opinion Rev. 9/15/03 Inmc0138 Information about the Applicant Company Name INTERMEC Technologies Corporation Grantee Cheryl White Address 6001 36th Avenue West City, State, Zip Everett, WA 98203-1264 Job Number inmc0138 Model EasyLAN FCC ID HN2-802CF13E Agent None Approval Type Original Equipment Class DTS Digital Transmission System Rule Part 15.247DSSS Overview This application is for the INTERMEC Technologies Direct Sequence Spread Spectrum Transceiver FCC ID: HN2-802CF13E. The application enclosed requests limited modular approval with the appropriate attestation. The compact flash radio transmitter conducted characteristics are shown within the BABT report under FCC ID: EHA-802CF13. The CF radio is now integrated within a multi-function interface card to allow label printers to utilize the wireless LAN function. The testing of the module contains data for external antennas offered for sale when used with Intermec Technologies label printers. Recommendation All items have been resolved and completed to my satisfaction; therefore I recommend this application for approval. Signature 11/3/2004 Dave Tolman, TCB Committee Northwest EMC TCB Compliance Opinion Rev. 9/15/03 Inmc0138 Findings Opinions Specification Requirements Description 47 Cfr 2.1033(b)(3) Installation guide, operating instructions, user manual Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference User Manual Supplement.pdf Specification Requirements Description 47 Cfr 2.1033(b)(4) Operational description Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Operational Description.pdf Specification Requirements Description 47 Cfr 2.1033(b)(5) Frequency block diagram Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Block Diagram.pdf Specification Requirements Description 47 Cfr 2.1033(b)(6) Schematic diagram Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Schematics.pdf Specification Requirements Description 47 Cfr 2.1033(b)(7) Internal and external photos Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Internal Photos.pdf, External Photos.pdf Specification Requirements Description 47 Cfr 2.1033(b)(6) Conversions showing how the test results were achieved Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Schematics.pdf Northwest EMC TCB Compliance Opinion Rev. 9/15/03 Inmc0138 Specification Requirements Description 47 Cfr 1.1307(b),2.1091,2.1093 RF Exposure Hazzard Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference RF exposure.pdf Specification Requirements Description 47 Cfr 15.19 Labeling Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference User Manual Supplement.pdf, Label.pdf Specification Requirements Description 47 Cfr 15.21 Information for user Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference User Manual Supplement.pdf Specification Requirements Description 47 Cfr 15.27 Special accessories Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Technical Reports Specification Requirements Description 47 Cfr 15.33 Frequency range of tests Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Technical Reports Specification Requirements Description 47 Cfr 15.35 Measurement detectors Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Technical Reports Specification Requirements Description 47 Cfr 15.203 Antenna Requirements Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Technical Reports Northwest EMC TCB Compliance Opinion Rev. 9/15/03 Inmc0138 Specification Requirements Description 47 Cfr 15.205 Restricted bands Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Technical Reports Specification Requirements Description 47 Cfr 15.207 Power line Conducted emissions Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Technical Reports Specification Requirements Description 47 Cfr 15.209 Spurious Emissions Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Technical Reports Specification Requirements Description 47 Cfr 15.247(a) Occupied Bandwidth Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Technical Reports Specification Requirements Description 47 Cfr 15.247(b) Output Power Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Technical Reports Specification Requirements Description 47 Cfr 14.247(c) Band Edge Compliance Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Technical Reports Specification Requirements Description 47 Cfr 14.247(c) Spurious Conducted Emissions Opinion The device meets the requirements of the rule. Discussion The client has provided the necessary exhibit. Reference Technical Reports Northwest EMC TCB Compliance Opinion Rev. 9/15/03 Inmc0138 Specification Requirements Description 47 Cfr 14.247(c) Spurious Radiated Emission…

Text truncated - open the document above for the full version.

Intermec Technologies Corporation REPORT NO: 040804-1 EMC Test Laboratory DATE: Aug. 4, 2004 DOC. NO.: 577-501-204 Page 1 of 7 EasyLAN Wireless, CF Radio, FCC 15.247, Canada RSS-210, RSS-102 FCC ID: HN2-802CF13E APPENDIX A, External Photos Technologies Corporation EMC Test Laboratory Cedar Rapids, IA MEASUREMENT/TECHNICAL REPORT Intermec Technologies Corporation EasyLAN® Wireless CF Radio 2.4 GHz Spread Spectrum Transmitter REPORT NO: 040804-1 DATE: Aug. 8, 2004 Appendix A EXTERNAL PHOTOS Page 2-3 Front and back view of EasyLAN Wireless CF Radio Interface Page 4-5 Front and back view of ActionTech CF Radio Page 6 EasyLAN Wireless CF Radio within Intermec 3400E Page 7 EasyLAN Wireless CF Radio within Intermec 4400 Intermec Technologies Corporation REPORT NO: 040804-1 EMC Test Laboratory DATE: Aug. 4, 2004 DOC. NO.: 577-501-204 Page 2 of 7 EasyLAN Wireless, CF Radio, FCC 15.247, Canada RSS-210, RSS-102 FCC ID: HN2-802CF13E APPENDIX A, External Photos EasyLAN Wireless CF, front view CF radio pulled out. Intermec Technologies Corporation REPORT NO: 040804-1 EMC Test Laboratory DATE: Aug. 4, 2004 DOC. NO.: 577-501-204 Page 3 of 7 EasyLAN Wireless, CF Radio, FCC 15.247, Canada RSS-210, RSS-102 FCC ID: HN2-802CF13E APPENDIX A, External Photos EasyLAN Wireless CF, back view. Intermec Technologies Corporation REPORT NO: 040804-1 EMC Test Laboratory DATE: Aug. 4, 2004 DOC. NO.: 577-501-204 Page 4 of 7 EasyLAN Wireless, CF Radio, FCC 15.247, Canada RSS-210, RSS-102 FCC ID: HN2-802CF13E APPENDIX A, External Photos ActionTech Compact Flash Radio, front. Intermec Technologies Corporation REPORT NO: 040804-1 EMC Test Laboratory DATE: Aug. 4, 2004 DOC. NO.: 577-501-204 Page 5 of 7 EasyLAN Wireless, CF Radio, FCC 15.247, Canada RSS-210, RSS-102 FCC ID: HN2-802CF13E APPENDIX A, External Photos ActionTech Compact Flash Radio, back. Intermec Technologies Corporation REPORT NO: 040804-1 EMC Test Laboratory DATE: Aug. 4, 2004 DOC. NO.: 577-501-204 Page 6 of 7 EasyLAN Wireless, CF Radio, FCC 15.247, Canada RSS-210, RSS-102 FCC ID: HN2-802CF13E APPENDIX A, External Photos Intermec 3400E, front view, with EasyLAN Wireless CF Radio installed. Intermec 3400E, rear view, with EasyLAN Wireless CF Radio installed. Intermec Technologies Corporation REPORT NO: 040804-1 EMC Test Laboratory DATE: Aug. 4, 2004 DOC. NO.: 577-501-204 Page 7 of 7 EasyLAN Wireless, CF Radio, FCC 15.247, Canada RSS-210, RSS-102 FCC ID: HN2-802CF13E APPENDIX A, External Photos Intermec 4400, front view, with EasyLAN Wireless CF Radio installed. Intermec 4400, front view, with EasyLAN Wireless CF Radio installed.

Intermec Technologies Corporation REPORT NO: 040804-1 EMC Test Laboratory DATE: Aug. 4, 2004 DOC. NO.: 577-501-204 Page 1 of 5 EasyLAN Wireless, CF Radio, FCC 15.247, Canada RSS-210, RSS-102 FCC ID: HN2-802CF13E APPENDIX B, Labels and Placements Technologies Corporation EMC Test Laboratory Cedar Rapids, IA MEASUREMENT/TECHNICAL REPORT Intermec Technologies Corporation EasyLAN® Wireless CF Radio 2.4 GHz Spread Spectrum Transmitter REPORT NO: 040804-1 DATE: Aug. 8, 2004 Appendix B LABELING Page 2-3 Module label and placement Page 4-5 Printer exterior label and placement Intermec Technologies Corporation REPORT NO: 040804-1 EMC Test Laboratory DATE: Aug. 4, 2004 DOC. NO.: 577-501-204 Page 2 of 5 EasyLAN Wireless, CF Radio, FCC 15.247, Canada RSS-210, RSS-102 FCC ID: HN2-802CF13E APPENDIX B, Labels and Placements Radio module label. Size 0.625 x 1.500 inches (1.59 x 3.81 cm) Intermec Technologies Corporation REPORT NO: 040804-1 EMC Test Laboratory DATE: Aug. 4, 2004 DOC. NO.: 577-501-204 Page 3 of 5 EasyLAN Wireless, CF Radio, FCC 15.247, Canada RSS-210, RSS-102 FCC ID: HN2-802CF13E APPENDIX B, Labels and Placements Label placement on radio module. Back of the board Antenna connection Radio Regulatory Label Intermec Technologies Corporation REPORT NO: 040804-1 EMC Test Laboratory DATE: Aug. 4, 2004 DOC. NO.: 577-501-204 Page 4 of 5 EasyLAN Wireless, CF Radio, FCC 15.247, Canada RSS-210, RSS-102 FCC ID: HN2-802CF13E APPENDIX B, Labels and Placements Exterior label for label printers. Size 1.00 x 2.00 inches (2.54 x 5.08 cm) Intermec Technologies Corporation REPORT NO: 040804-1 EMC Test Laboratory DATE: Aug. 4, 2004 DOC. NO.: 577-501-204 Page 5 of 5 EasyLAN Wireless, CF Radio, FCC 15.247, Canada RSS-210, RSS-102 FCC ID: HN2-802CF13E APPENDIX B, Labels and Placements Exterior label placement. EasyLAN Wireless Board Radio Regulatory Label Back of the printer

Intermec Technologies Corporation REPORT NO: 040804-1 EMC Test Laboratory DATE: Aug. 4, 2004 DOC. NO.: 577-501-204 Page 1 of 5 EasyLAN Wireless, CF Radio, FCC 15.247, Canada RSS-210, RSS-102 FCC ID: HN2-802CF13E APPENDIX C, Internal Photographs of Radio Module Technologies Corporation EMC Test Laboratory Cedar Rapids, IA MEASUREMENT/TECHNICAL REPORT Intermec Technologies Corporation EasyLAN® Wireless CF Radio 2.4 GHz Spread Spectrum Transmitter REPORT NO: 040804-1 DATE: Aug. 8, 2004 Appendix C INTERNAL PHOTOS Page 2 PCB Front with internal shield Page 3 PCB Back with internal shield Page 4 PCB Front Page 5 PCB Back Intermec Technologies Corporation REPORT NO: 040804-1 EMC Test Laboratory DATE: Aug. 4, 2004 DOC. NO.: 577-501-204 Page 2 of 5 EasyLAN Wireless, CF Radio, FCC 15.247, Canada RSS-210, RSS-102 FCC ID: HN2-802CF13E APPENDIX C, Internal Photographs of Radio Module Front view of radio with internal shield. Intermec Technologies Corporation REPORT NO: 040804-1 EMC Test Laboratory DATE: Aug. 4, 2004 DOC. NO.: 577-501-204 Page 3 of 5 EasyLAN Wireless, CF Radio, FCC 15.247, Canada RSS-210, RSS-102 FCC ID: HN2-802CF13E APPENDIX C, Internal Photographs of Radio Module Back view of radio with internal shield. Intermec Technologies Corporation REPORT NO: 040804-1 EMC Test Laboratory DATE: Aug. 4, 2004 DOC. NO.: 577-501-204 Page 4 of 5 EasyLAN Wireless, CF Radio, FCC 15.247, Canada RSS-210, RSS-102 FCC ID: HN2-802CF13E APPENDIX C, Internal Photographs of Radio Module Front view of radio PCB. Intermec Technologies Corporation REPORT NO: 040804-1 EMC Test Laboratory DATE: Aug. 4, 2004 DOC. NO.: 577-501-204 Page 5 of 5 EasyLAN Wireless, CF Radio, FCC 15.247, Canada RSS-210, RSS-102 FCC ID: HN2-802CF13E APPENDIX C, Internal Photographs of Radio Module Back view of radio PCB.

Intermec Technologies Corporation REPORT NO: 040804-1 EMC Test Laboratory DATE: Aug. 4, 2004 DOC. NO.: 577-501-204 Page 1 of 7 …

Text truncated - open the document above for the full version.