I4U-25VSTUltra Compact SD COFDM Transmitter 25VST

VSTX HD/SD COFDM Transmitter User Manual IMT PUBLICATION: M22-0002-00A, REV 2.3 VSTX User Manual Revision 2.3 2 Revision History Date Revision Modified By Description October 1, 2009 1.0 JB Initial release October 12. 2011 1.1a Mike Hardy Major Update and cleanup. Removed ASI/SDI. October 27. 2011 1.1b Mike Hardy Updated ribbon table November 28. 2011 2.0 Sean Van Update December 19. 2011 2.1 Alexander Minicozzi Jason provided FCC and IC Statements January 10. 2012 2.2 Jason Wang Added FCC & IC Label requirements January 25. 2012 2.3 Jason Wang Added RP-SMA Antenna Port for 25VST IMT VSTX Users Manual IMT Publication: M22-0002-00A IMT, LLC. 200 International Drive Mt. Olive, NJ, 07828, USA. T +1 908 852 3700 F +1 908 813 0399 www.imt-solutions.com We make every effort to ensure our documentation is as accurate and as complete as possible. In the event that you find any errors or omissions, please contact Customer Tech Support at (908) 852-3700, or via email a [email protected]. © Copyrighted 2011 - IMT, LLC - Mount Olive, New Jersey 07828 VSTX User Manual Revision 2.3 3 This product has been approved by the following regulatory bodies at 2400 – 2483.5 MHz: FCC (USA) IC (Canada) CAUTION! RISK OF ELECTRICAL SHOCK. DO NOT REMOVE COVERS. Do not remove any covers Refer servicing to qualified technicians only Disconnect all power before servicing Read and perform all instructions carefully Failure to follow suggested instructions and guidelines may void all warranties PRUDENCE! RISQUE DE CHOC ÉLECTRIQUE. NE SUPPRIMEZ PAS LES COUVERTURES. Ne supprimez pas les couvertures Voir entretien à qualifiés Techniciens seulement. Déconnectez tous les pouvoir avant l'entretien. Lecture et effectuer toutes les instructions attentivement. Échec de suivre les lignes directrices et les instructions proposées peut-être annuler toutes les garanties. VSTX User Manual Revision 2.3 4 FCC CAUTION/ PRUDENCE DE FAC Any change or modification not approved by the party responsible for compliance could void the user’s authority to operate this device. This device requires professional installation. For operation within 2400 – 2483.5 MHz frequency range, the maximum EIRP must be less than 36 dBm. The qualified antenna types to be used with this device include: dipole antenna (3dBi or 5dBi) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. In order to maintain compliance with the FCC RF exposure guidelines, this device should be installed and operated with a minimum distance of 20cm between the radiator, and the body of the operator and/or nearby persons. Tout changement ou modification non approuvé par la partie responsable de la conformité pouvait annuler l'autorisation de l'utilisateur pour l'exploitation de ce dispositif. Ce dispositif nécessite l'installation professionnelle. Pour l'opération au sein de la gamme de fréquences de 2400 – 2483.5 MHz, la pire maximale doit être inférieure à 36 dBm. Les types d'antenne qualifiés pour être utilisé avec ce dispositif, citons : Antenne dipôle faible Gain (3dBi ou 5 dBi). Cet appareil est conforme à la partie 15 des règles de la FCC. Opération est soumis à deux conditions suivantes: (1) ce dispositif ne peut pas causer de brouillage préjudiciable, et (2) ce dispositif doit accepter toute ingérence a reçu, y compris le brouillage qui peut provoquer l'opération non désirée. Afin de maintenir la conformité avec les directives d'exposition RF FCC, ce dispositif doit être installé et exploité avec une distance minimale de 20 cm entre le radiateur et le corps de l'opérateur ou à proximité de personnes. FCC STATEMENT This equipment (FCC ID: I4U-25VST) has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. DÉCLARATION DE FAC Cet équipement (FCC ID: I4U-25VST) a été testé et de respecter les limites pour une classe b dispositif numérique, conformément à la partie 15 des règles de la FCC. VSTX User Manual Revision 2.3 5 IC Notice/:IC Avis 1. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. 2. This radio transmitter (IC: 9479A-25VST) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le présent émetteur radio (identifier le dispositif par son numéro de certification ou son numéro de modèle s'il fait partie du matériel de catégorie I) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l…

Text truncated - open the document above for the full version.

Date: 01/09/2012 Subject: Request for Modular Approval – FCC ID: I4U-25VST To whom it may concern: Integrated Microwave Technologies (IMT) would like to apply for a Modular Approval for the 25VST OEM Module. 25VST is a compact transmitter that digitally encodes video signals and transmits them using COFDM modulation over microwave frequencies using secure methods. The module version of 25VST is designed to be the video transmitter and integrated into the OEM devices. 1. The modular transmitter must have its own RF shielding. This is intended to ensure that the module does not have to rely upon the shielding provided by the device into which it is installed in order for all modular transmitter emissions to comply with Part 15 limits. It is also intended to prevent coupling between the RF circuitry of the module and any wires or circuits in the device into which the module is installed. Such coupling may result in non-compliant operation. 25VST module contains its own RF shielding as shown in I4U-25VST Internal Photographs-Rev1.0.pdf. As depicted in the Test Setup Photos, the unit was tested in a stand-alone configuration, and met the FCC requirements. 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over- modulation. 25VST module has buffered modulation / data inputs. 3. The modular transmitter must have its own power supply regulation. This is intended to ensure that the module will comply with Part 15 requirements regardless of the design of the power supplying circuitry in the device into which the module is installed. 25VST module has its own power supply regulation. 4. The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). Any antenna used with the module must be approved with the module, either at the time of initial authorization or through a Class II Integrated Microwave Technologies 200 International Drive Mt. Olive, NJ 07828 T + 908 852 3700 F + 908 813 0399 www.imt-solutions.com You’ll know us by the company we keep: IMT Nucomm RF Central Microwave Service Company permissive change. The “professional installation” provision of Section 15.203 may not be applied to modules. 25VST Module complies with the antenna requirements of Section 15.203 and 15.204 by using reversed polarity SMA connector. 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in Section 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see Section 15.27(a)). The length of these lines shall be length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified or commercially available (see Section 15.31(i)). 25VST Module was tested in a stand-alone configuration and complies with the Part 15 emission requirements. The power lines and I/O lines do not contain ferrites. The power lines are length typical of actual use. The support equipment connected during testing was unmodified. 6. The modular transmitter must be labeled with its own FCC ID number, and, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: XYZMODEL1” or “Contains FCC ID: XYZMODEL1.” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. FCC ID is on the product label. Labeling instructions for the OEM are in the product manual. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. 25VST transmitter complies with all applicable requirements. 8. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 2.1091, 2.1093 and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are …

Text truncated - open the document above for the full version.

Date: 11/30/2011 Compliance Certification Services Certification Division 561F Monterey Road Morgan Hill, CA 95037 To whom it may concern: We, the undersigned, hereby authorize Advanced Compliance Laboratory, Inc., to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Advanced Compliance Laboratory, Inc. on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing Advanced Compliance Laboratory, Inc. as our agent, we still recognize that we are responsible to:  comply with the relevant provisions of the certification program;  make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;  make claims regarding certification only in respect of the scope for which certification has been granted;  do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;  upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;  use certification only to indicate the products are certified as being in conformity with specified standards;  endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;  ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division;  keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to Integrated Microwave Technologies 200 International Drive Mt. Olive, NJ 07828 T + 908 852 3700 F + 908 813 0399 www.imt-solutions.com You’ll know us by the company we keep: IMT Nucomm RF Central Microwave Service Company  make these records available to the Certification Division when requested;  take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;  Document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Jason Wang FCC Contact Person, Compliance Engineer Integrated Microwave Technologies LLC

I4U-25VST Confidentiality Request-Rev1.1.docx Created by wangj Page 1 of 2 Confidentiality Request Pertaining to Request for Certification of FCC ID: I4U-25VST TO WHOM IT MAY CONCERN Integrated Microwave Technologies (thereafter refers to as IMT) hereby respectfully requests confidentiality of certain materials pursuant to published FCC guidelines, with respect to our Request for Certification of FCC ID: I4U- 25VST, in accordance with FCC Sections 0.459(b), and 0.457(d) IMT has submitted a Technical Report, as required by FCC guidelines, in conjunction with the Request for Certification. Certain parts of this Technical Report and/or the attendant submittals contain information that are trade secrets and are requested to be withheld from public inspection. The attachments and/or exhibits, henceforth collectively “Materials”, designated as followings are requested to remain confidential: Exhibit Type File Name Schematics I4U-25VST Schematics-Rev1.0.pdf Operational Description I4U-25VST Theory of Operation-Rev1.0.pdf Block Diagram I4U-25VST Block Diagram-Rev1.0.pdf Internal Photo* I4U-25VST Internal Photos-Rev1.0.pdf *previously approved case: Tracking Number 248266, 390711 and 952443; IMT is formerly known as RF Extreme, LLC. These materials contain commercial trade secret information that would reveal our unique proprietary system design which is a result of our proprietary Research and Development. These materials comprise information that differentiates our products from those of our significant market competition, and which allow us operate in the very competitive market for this product. These materials, if released, would result in substantial competitive harm due to unlicensed copying of our proprietary design(s) in whole or in part. Integrated Microwave Technologies 200 International Drive Mt. Olive, NJ 07828 T + 908 852 3700 F + 908 813 0399 www.imt-solutions.com You’ll know us by the company we keep: IMT Nucomm RF Central Microwave Service Company I4U-25VST Confidentiality Request-Rev1.1.docx Created by wangj Page 2 of 2 To protect these materials, IMT does not release them to the public, and protects them from unauthorized disclosure by third parties via the execution of Non-Disclosure Agreement’s. In respect to the internal photo of the Final Power Amplifiers, IMT feels that additional justification for confidentiality exists due to the fact that the amplifier circuit board(s) are mounted inside a sealed component that can sustain damage upon opening, and that said component itself is mounted inside an enclosure that the end-user may not readily open, and that so opening would nullify any equipment warranty since the equipment is only serviceable by IMT or our designated technicians. The internal images of the amplifier would provide any reasonably savvy RF engineer the means to replicate the design and result in substantial competitive harm to IMT. Also, the internal photos show the digital circuitries and IC markings, which would provide competitors information on the technologies used. Therefore, internal photos would expose our proprietary design information, would provide any reasonably savvy digital design engineer the means to replicate the design, and result in substantial competitive harm to IMT. 25VST is a microwave transmitter. It is only operated by and under the control of Studio professionals. It is not a general consumer product, and it is not accessible by general public. Furthermore, the equipment is only serviceable by us, the manufacture or our trained designated technicians IMT requests that these materials be withheld from public inspection in perpetuity due to the possibility and likelihood that the designs will be utilized, in whole or in part, by IMT as the basis for future products which would likewise be subject to the same competitor interest. Sincerely yours, . Jason Wang FCC Contact Person, Compliance Engineer

EUT: Ultra Compact SD COFDM Transmitter Report No: 0048-111123-01 Model: 25VST FCC ID:I4U-25VST IC: 9479A-25VST Page 151 of 153 Advanced Compliance Laboratory, Inc. 6 Randolph Way, Hillsborough, NJ 08844, tel:(908) 927 9288 PRODUCT PHOTO EUT Front View EUT: Ultra Compact SD COFDM Transmitter Report No: 0048-111123-01 Model: 25VST FCC ID:I4U-25VST IC: 9479A-25VST Page 152 of 153 Advanced Compliance Laboratory, Inc. 6 Randolph Way, Hillsborough, NJ 08844, tel:(908) 927 9288 EUT Rear View

EUT: Ultra Compact SD COFDM Transmitter Report No: 0048-111123-01 Model: 25VST FCC ID:I4U-25VST IC: 9479A-25VST Page 148 of 153 Advanced Compliance Laboratory, Inc. 6 Randolph Way, Hillsborough, NJ 08844, tel:(908) 927 9288 FCC/IC Label IMT Ultra Compact SD COFDM Transmitter Model : 25VST FCC ID: I4U-25VST IC: 9479A-25VST This device complies with FCC Part 15C & IC RSS-210 Rules. Operating is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Figure 1 Proposed FCC/IC ID Label for Ultra Compact SD COFDM Transmitter Module (The statement may be shown in its user manual for small size devices ) ID Label Figure 2 Proposed ( ID Label location ) EUT: Ultra Compact SD COFDM Transmitter Report No: 0048-111123-01 Model: 25VST FCC ID:I4U-25VST IC: 9479A-25VST Page 149 of 153 Advanced Compliance Laboratory, Inc. 6 Randolph Way, Hillsborough, NJ 08844, tel:(908) 927 9288 IMT Ultra Compact SD COFDM Transmitter Model : 25VST Contains FCC ID: I4U-25VST IC: 9479A-25VST This device complies with FCC Part 15C & IC RSS-210 Rules. Operating is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Figure 3 Proposed FCC/IC ID Label for 25VST Hosting Device (The statement may be shown in its user manual for small size devices )

ANTENNA FACTOR PART NUMBER ANT-2.4-CW-HWR-SMA 931-0005-000-R ANTENNA 2.4GHZ 1/2WAV WHIP SMA KAM 11/23//10 02/24/11 Typical VSWR ™ ANT-2.4-CW-HWR-xxx DATA SHEET Product DimensionsDescription Features Electrical Specifications Ordering Information HWR Series 1/2-wave center-fed dipole antennas deliver outstanding performance in a rugged and cosmetically attractive package. The articulating base allows the antenna to tilt 90 degrees and rotate 360 degrees. The antenna's internal counterpoise eliminates external ground plane dependence and maximizes performance. HWR Series antennas attach via a standard SMA or Part 15 compliant RP-SMA connector. Custom colors and connectors are available for volume OEM customers. 5.59” (142.0) 1.02” (26.0) 0.32” (8.2) Electrical specifications and plots measured on 4.00” x 4.00” reference ground plane 0.39” (10.0) 4.57” (116.0) Polar Plot & Gain Information Antenna Factor159 Ort Lane Merlin, OR 97532 www.antennafactor.com 541-956-0931 (phone) 541-471-6251 (fax) Rev 07-27-10 •Internal counterpoise •Low cost •Tilts and rotates •Omni-directional pattern •Outstanding VSWR •Rugged & damage-resistant •Standard SMA or Part 15 compliant RP-SMA connector •Custom colors and terminations for volume OEMs •Internal O-ring seal on connector •Center Freq.2.45GHz •Recmd. Freq. Range 2.3-2.6GHz •Wavelength1/2-wave •VSWR<2.0 typ. at center •Impedance50 ohms •ConnectorRP-SMA or SMA •ANT-2.4-CW-HWR-RPS (with RP-SMA connector) •ANT-2.4-CW-HWR-SMA (with SMA connector) CENTER 24500.000MHz SPAN 500.000MHz S11 SWR 1.084 LDCFRHS_B This document certifies that the Part Numbers listed in this document and manufactured by Linx Technologies, Antenna Factor, and Connector City do not to the knowledge of the certifier contain the substances listed in the table below in concentrations exceeding the Maximum Control Value (MCV), and will be compliant as of the date listed. Substance Maximum Control Value Lead 0.1% by weight (1000 ppm) (1) Mercury 0.1% by weight (1000 ppm) Cadmium 0.01% by weight (100 ppm) (1) Hexavalent Chromium 0.1% by weight (1000 ppm) Polybrominated Biphenyls (PBB) 0.1% by weight (1000 ppm) Polybrominated Diphenyl Ethers (PBDE) 0.1% by weight (1000 ppm) (1) The MCV does not apply to applications for which exemptions have been granted to the RoHS Directive Products containing the substances listed in the table above, in concentrations below the MCV, are understood to be in compliance with Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronics equipment (RoHS Directive) in accordance with the definitions set forth in the directives. RoHS Certificate of Compliance 159 ORT LANE MERLIN, OR 97532 PHONE: (800) 736-6677 FAX: (541) 471-6251 www.linxtechnologies.com LDCFRHS_B RoHS Compliance by Part Number Linx Part Number Description RoHS information RoHS Compatible Compliant Since Planned start of production of RoHS compatible components TXM-315-LC LC Series RF Transmitter 315MHz Yes LOT# 1043 Now Available TXM-418-LC LC Series RF Transmitter 418MHz Yes LOT# 2189 Now Available TXM-433-LC LC Series RF Transmitter 433MHz Yes LOT# 3043 Note 1 RXM-315-LR LR Series RF Receiver 315MHz Yes LOT# 10002 Now Available RXM-418-LR LR Series RF Receiver 418MHz Yes LOT# 10023 Now Available RXM-433-LR LR Series RF Receiver 433MHz Yes LOT# 10003 Now Available TXM-315-LR LR Series RF Transmitter 315MHz Yes LOT# 10001 Now Available TXM-418-LR LR Series RF Transmitter 418MHz Yes LOT# 10009 Now Available TXM-433-LR LR Series RF Transmitter 433MHz Yes LOT# 10003 Now Available RXD-315-KH2 KH2 Series RF Receiver/Decoder 315MHz Yes Start of Production Now Available RXD-418-KH2 KH2 Series RF Receiver/Decoder 418MHz Yes Start of Production Now Available RXD-433-KH2 KH2 Series RF Receiver/Decoder 433MHz Yes Start of Production Now Available TXE-315-KH2 KH2 Series RF Transmitter/Encoder 315MHz Yes Start of Production Now Available TXE-418-KH2 KH2 Series RF Transmitter/Encoder 418MHz Yes Start of Production Now Available TXE-433-KH2 KH2 Series RF Transmitter/Encoder 433MHz Yes Start of Production Now Available TRM-315-LT LT Series RF Transceiver 315MHz Yes Start of Production Now Available TRM-418-LT LT Series RF Transceiver 418MHz Yes Start of Production Now Available TRM-433-LT LT Series RF Transceiver 433MHz Yes Start of Production Now Available RXM-900-HP3-PPO HP3 Series RF Receiver 900MHz 8-CH SIP Pack Yes LOT# 10008 Now Available TXM-900-HP3-PPO HP3 Series RF Transmitter 900MHz 8-CH SIP Pack Yes LOT# 10006 Now Available RXM-900-HP3-PPS HP3 Series RF Receiver 900MHz 8 and 100-CH SIP Pack Yes LOT# 10003 Now Available TXM-900-HP3-PPS HP3 Series RF Transmitter 900MHz 8 and 100-CH SIP Pack Yes LOT# 10002 Now Available RXM-900-HP3-SPO HP3 Series RF Receiver 900MHz 8-CH SMD Pack No LOT# TBD Mar-2008, as inventories deplete TXM-900-HP3-SPO HP3 Series RF Transmitter 900MHz 8-CH SMD Pack No LOT# TBD Mar-2008, as inventories deplete RXM-900-HP3-SPS HP3 Series RF Receiver 900MHz 8 and 100-CH SMD Pack Yes LOT# 10000 Now Available TXM-900-HP3-SPS HP3 Series RF Transmitter 900MHz 8 and 100-CH SMD Pack Yes LOT# 10000 Now Available RXM-916-ES ES Series RF Receiver 916MHz Yes LOT# 10017 Now Available RXM-869-ES ES Series RF Receiver 869MHz Yes LOT# 10000 Now Available TXM-916-ES ES Series RF Transmitter 916MHz Yes LOT# 10018 Now Available TXM-869-ES ES Series RF Transmitter 869MHz Yes LOT# 1000 Now Available 159 ORT LANE MERLIN, OR 97532 PHONE: (800) 736-6677 FAX: (541) 471-6251 www.linxtechnologies.com LDCFRHS_B RoHS Compliance by Part Number RXM-GPS-SG SG Series GPS Receiver Yes Start of Production Now Available RXM-GPS-SR SR Series GPS Receiver Yes Start of Production Now Available SDM-USB-QS-S QS Series USB Module Yes LOT# 10004 Now Available CMD-HHCP-315 8 Button Compact Handheld Transmitter 315MHz Yes JAN-2011 Now Available CMD-HHCP-418 8 Button Compact Handheld Transmitter 418MHz Yes JAN-2011 N…

Text truncated - open the document above for the full version.

AIR802 LLC PART NUMBER ANRD245X05-RSP 931-0006-000-R ANT DUAL 2/5GHz 5dBI W/SMA-M; SWIVEL, VERT KAM 04/27/11 04/27/11 Dual-Band Dipole (Rubber Duck) Antenna, 2.4 GHz and 5.1 to 5.8 GHz...in, Reverse Polarity SMA (RP-SMA) Plug Male Connector - Air802 LLC USA: (630) 428-3108 Air802 LLC :: Antennas :: Dual-Band / Multi-Band :: Dipole (Rubber Duck) :: Dual-Band WiFi Dipole (Rubber Duck) Antenna, 2.4 GHz and 5.1 to 5.8 GHz, 5 dBi Gain, Reverse Polarity SMA (RP-SMA) Plug Male Connector Dual-Band WiFi Dipole (Rubber Duck) Antenna, 2.4 GHz and 5.1 to 5.8 GHz, 5 dBi Gain, Reverse Polarity SMA (RP-SMA) Plug Male Connector #ANRD245X05-RSP AIR802® model ANRD245X05-RSP is a dual-band dipole (rubber duck) antenna for the 2.4 and 5.1 to 5.8 GHz band with 5 dBi gain on both bands. This antenna has a reverse polarity SMA (RP-SMA) plug (male) connector. Designed, engineered and manufactured by AIR802, this indoor antenna provides high gain and provides tilt and swivel functions for full flexibility. Applications • 802.11a/b/g/n Wi-Fi Networks • Bluetooth • Streaming Wireless Video • RFID • Public Hot Spots • Schools or Universities • Hotel Lobby and Hallways • Medical Buildings • Any Commerical Office, Retail Store Specifications Frequency 2400 - 2485 MHz and 5.1 to 5.8 GHz Gain 5 dBi @ 2.4 GHz 5 dBi @ 5.1 to 5.8 GHz VSWR < 1.5 at 2.4 GHz < 2.0 at 5.1 to 5.8 GHz Polarization Vertical Vertical Beam Width47° Horizontal Beam Width 360° Impedance 50Ω Max. Input Power 5 watts Weight 0.022 lbs (10 grams) Length 4.27 inches (108.5 mm) Connector Reverse Polarity SMA (RP-SMA) Plug (Male) FinishMatte Black Flame RatingUL 94HB RoHS Compliant Yes Product Warranty This antenna is of absolute quality and is fully covered under by the AIR802 LLC Limited Warranty. http://www.air802.com/dual-band-dipole-rubber-du...-sma-rp-sma-plug-male-connector.html?printable=Y (1 of 3) [12/21/2010 8:35:06 AM] Dual-Band Dipole (Rubber Duck) Antenna, 2.4 GHz and 5.1 to 5.8 GHz...in, Reverse Polarity SMA (RP-SMA) Plug Male Connector - Air802 LLC Terminology Note: Due to various use of terminology, this antenna maybe referred to as: wlan omni antenna, wireless omni antenna, wireless LAN omni, 2.4GHz omni antenna, 2400MHz omni antenna, ISM omni antenna, wireless LAN omni antenna, 2.4 omni antenna, 802.11 omni antenna, 802.11b omni antenna, 802.11g omni antenna, 802.11b/g omni antenna, 802.11n omni antenna, 802.1a/b/g omni antenna, wifi omni antenna, 2.4GHz wifi omni antenna, wi-fi omni antenna, RF omni antenna, hotspot omni antenna, 2.4GHz antena, wifi antena, 802.11 antena, inalámbrico 2.4 GHz WiFi antena, dual band antenna, dual band dipole, dual band rubber duck, 2.4 5 ghz antenna, 2.4 5.8 antenna, wifi dual band antenna Price:USD $11.95 Quantity Add to cartTell A Friend http://www.air802.com/dual-band-dipole-rubber-du...-sma-rp-sma-plug-male-connector.html?printable=Y (2 of 3) [12/21/2010 8:35:06 AM] Detail Images Other Products Customer Reviews Dual-Band Dipole (Rubber Duck) Antenna, 2.4 GHz and 5.1 to 5.8 GHz...in, Reverse Polarity SMA (RP-…

Text truncated - open the document above for the full version.