IAJ200Walkie Talkie

ATTENTION: Batteries should only be installed by an adult. 1. Open the battery compartment door. 2. Install 3 "AA" size batteries into the compartment of each Walkie Talkie, making sure that the + and - polarities match the diagram printed inside. 3. Close the battery compartment door. Installing the Batteries Questions or Comments For questions or comments regarding this or other Tech2Go products, please call our toll-free number: 1-866-832-4022. It is important to keep the unit as dry and clean as possible. Clean the unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as thinner or similar materials are not recommended, as they may damage the surface of the case. Do not allow dirt, sand, small particles, water or other liquids to enter the toy's casing. If the unit is to be left unused for an extended time period, such as a month or longer, have an adult remove the battery to extend its life and to prevent leaking or corrosion. Battery Installation 1 3 2 Walkie Talkie Controls Turning Power ON/OFF FCC Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. CAN ICES-3 (B)/NMB-3(B) FCC ID : IAJ200 MODEL V200 Important Message to Customers Thank you for purchasing one of our many top-quality electronic products. Please take a moment to read through these instructions to help you understand the safe and proper way to use this toy to extend its usability. Walkie Talkies MODEL:XX-V200 INSTRUCTION MANUAL (FRONT) DATE : April 14, 2015 SIZE: 216 L x 140 H mm COLOR : 1C +1C MODEL:XX-V200 INSTRUCTION MANUAL (BACK) DATE : April 14, 2015 SIZE: 216 L x 140 H mm COLOR : 1C +1C For the Best Possible Performance • Only use the recommended/supplied batteries or equivalent. • Use alkaline batteries for longer life. • Do not mix old and new batteries, and do not mix alkaline, carbon-zinc or rechargeable nickel-cadmium batteries. • Insert batteries with proper polarity (+/–) as indicated. • Remove exhausted batteries from product. • Recharge rechargeable batteries under adult supervision. • Do not attempt to recharge non-rechargeable batteries. • Do not open batteries or heat them beyond normal ambient temperatures. • To prevent battery leakage or damage remove batteries from a product if it will not be used for a month or longer. • Use extreme caution handling leaking batteries (avoid direct contact with eyes and skin). If battery leakage comes in contact with eyes, IMMEDIATELY flush the eye with lukewarm and gently flowing water for at least 30 minutes. If skin contact occurs, wash skin with clear water for at least 15 minutes. Seek medical attention if any symptoms occur. • Store in cool, dry, ventilated area away from hazardous or combustible material. • Do not dispose of batteries in the household trash or fire. • Follow applicable laws and local regulations for the disposal and transportation of batteries. ON/OFF Switch Talk Button Call Button • Slide the On/Off Switch to the ON position to activate the Walkie Talkies. • Both Walkie Talkies must be turned on in order to send and receive messages. • Slide the On/Off Switch to the OFF position to shut off the Walkie Talkies. Press and hold the Talk Button while speaking into the Microphone. You Should Know For clear transmission, keep the Microphone approximately two inches from your mouth. Sending Voice Messages • Both Walkie Talkies must be turned on in order to send and receive messages. • Messages cannot be received while your Talk Button is being pressed. • Messages can be heard through the Speaker. Receiving Messages Microphone Walkie Talkies can be used for all kinds of fun games and activities. Here are two suggestions: Hide and Seek Just like regular Hide and Seek, but with a twist: the “Hider” can send clues to the “Seeker” using the Walkie Talkies. Mystery Sounds Can you recognize the mystery sound? One kid sends a sound over the Walkie Talkies, while another tries to guess what the sound is. Examples can include an animal, song, TV show, or anything else! Walkie Talkie Games If one or both of the Walkie Talkies do not work, or if the signal range of the Walkie Talkies decreases notably, this may indicate that the batteries are weak. Insert 3 new “AA” batteries into each unit. Please keep in mind that this product does not transmit well through obstacles such as trees, buildings, and metal structures. If there is a sizable increase in static, it may be due to the proximity of electric motors, fluorescent lights, power lines, or other signal-disrupting…

Text truncated - open the document above for the full version.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 5.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (obsolete) 3.0 4.0 May-23-2014 Added FCC ID field (current) 4.0 5.0 Sept 16 2014 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 5.0 Kiddesigns Inc (2015-04-14) To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, ____ Kiddesigns Inc _hereby authorize SIEMIC, Inc. to act as a Certification Body for certifying for the following project(s): Product: Walkie Talkie M/N: FR-V200, AV-V200, BE-V200, CR-V200, EG-V200, MM-V200, PW-V200, SM-V200, ST-V200, MS-V200MM, SW-V200E7 FCC ID: IAJ200 Sincerely, Jasjit Singh Safety of all matter Kiddesigns Inc 1299 Main Street Rahway New Jersey United States

SCS-F19: Confidentiality Request Letter Page 1 of 3 Rev 4.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (obsolete) 2.0 3.0 Jan-31-2012 Added IC confidentiality letter form (current) 3.0 4.0 March-26-2015 SCS-F19: Confidentiality Request Letter Page 2 of 3 Rev 4.0 Kiddesigns Inc (2015-04-14) To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: IAJ200 We hereby request confidential treatment of information accompanying this application as outlined below: - Block Diagram - Schematics - Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Jasjit Singh Safety of all matter Kiddesigns Inc 1299 Main Street Rahway New Jersey United States SCS-F19: Confidentiality Request Letter Page 3 of 3 Rev 4.0

Declaration on model difference Page 1 of 1 We the undersigned hereby confirm that any of our production units bearing the following model numbers are identical in circuitry and electrical, mechanical and physical construction; the only differences are the appearance and model no. for trading purpose. „ The above appearance is for color and silk-screen only. Product Name Trade Name Model No. Walkie Talkie Disney FR-V200, CR-V200, MM-V200, ST-V200, Barbie BE-V200 Marvel AV-V200, SM-V200 Hasbro EG-V200 Licasfilm Ltd. SW-V200E7 Spin Master PAW PW-V200 Universal Studios MS-V200MM Confirmed by: Jasjit Singh Safety of all matter 2015-04-28 Kiddesigns Inc 1299 Main Street Rahway New Jersey United States FCC ID: IAJ200

Label Location on EUT

AV-V200 PMS 430 SM-V200 PMS 1797 OFF ON PUSHTOTALK FCC ID : IAJ200 OFF ON PUSHTOTALK FCC ID : IAJ200 silkscreen color: black silkscreen color: black MODEL: AV-V200 FREQUENCY: 49MHz DC 4.5V, AA (R6) Size x 3 © MARVEL Tech 2Go 1-866 832-4022 Made in China  MODEL: SM-V200 FREQUENCY: 49MHz DC 4.5V, AA (R6) Size x 3 © MARVEL Tech 2Go 1-866 832-4022 Made in China  OFF ON PUSHTOTALK FCC ID : IAJ200 MODEL: EG-V200 FREQUENCY: 49MHz DC 4.5V, AA (R6) Size x 3 © 2014 Hasbro. All Rights Reserved. Tech 2Go 1-866 832-4022 Made in China  OFF ON PUSHTOTALK FCC ID : IAJ200 OFF ON PUSHTOTALK FCC ID : IAJ200 MODEL: MS-V200 FREQUENCY: 49MHz DC 4.5V, AA (R6) Size x 3 Minions is a trademark and copyright of Universal Studios. Licensed by Universal Studios Licensing LLC. All rights reserved. Tech 2Go 1-866 832-4022 Made in China  EG-V200 PMS 2592 FR-V200 PMS 297 silkscreen color: white MS-V200 PMS 646 silkscreen color: white silkscreen color: black MODEL: FR-V200 FREQUENCY: 49MHz DC 4.5V, AA (R6) Size x 3 © Disney Tech 2Go 1-866 832-4022 Made in China  PW-V200 PMS 300 ST-V200 PMS 2582 silkscreen color: white silkscreen color: white SW-V200 White OFF ON PUSHT OTALK FCC ID : IAJ200 OFF ON PUSHT OTALK FCC ID : IAJ200 OFF ON PUSHT OTALK FCC ID : IAJ200 MODEL: SW-V200 FREQUENCY: 49MHz DC 4.5V, AA (R6) Size x 3 © & TM Lucasfilm Ltd. Tech 2Go 1-866 832-4022 Made in China silkscreen color: black MODEL: PW-V200 FREQUENCY: 49MHz DC 4.5V, AA (R6) Size x 3 © 2015 Spin Master PAW Productions Inc. Tech 2Go 1-866 832-4022 Made in China MODEL: ST-V200 FREQUENCY: 49MHz DC 4.5V, AA (R6) Size x 3 © Disney Tech 2Go 1-866 832-4022 Made in China

Antenna

TRF No. FCC Part 15.235/A Page 1 of 25 Report No. KAD150401005E Ver.1.0 ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPART C REQUIREMENT OF Walkie Talkie Model No.: FR-V200, AV-V200, BE-V200, CR-V200, EG-V200, MM-V200, PW-V200, SM-V200, ST-V200, MS-V200MM, SW-V200E7 Trademark: Disney, Barbie, Marvel, Licasfilm Ltd., Spin Master PAW, Universal Studios FCC ID: IAJ200 Report No.: KAD150401005E Issue Date: April 27, 2015 Prepared for Kiddesigns Inc 1299 Main Street Rahway New Jersey United States Prepared by DONGGUAN EMTEK CO., LTD No.281, Guantai Road, Nancheng District, Dongguan, Guangdong, China TEL: 86-769-22807078 FAX: 86-769-22807079 This report shall not be reproduced, except in full, without the written approval of DONGGUAN EMTEK CO., LTD. TRF No. FCC Part 15.235/A Page 2 of 25 Report No. KAD150401005E Ver.1.0 VERIFICATION OF COMPLIANCE Applicant: Kiddesigns Inc 1299 Main Street Rahway New Jersey United States Manufacturer: Kiddesigns Inc 1299 Main Street Rahway New Jersey United States Product Description: Walkie Talkie Trademark: Disney, Barbie, Marvel, Hasbro, Licasfilm Ltd., Spin Master PAW, Universal Studios Model Number: FR-V200, AV-V200, BE-V200, CR-V200, EG-V200, MM-V200, PW-V200, SM-V200, ST-V200, MS-V200MM, SW-V200E7 (Note: The samples are the same except trademark and model number. So FR-V200 was selected for full test.) FCC ID: IAJ200 We hereby certify that: The above equipment was tested by Dongguan EMTEK Co., Ltd . The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10-2013 and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.235(2014). Date of Test : April 01, 2015 to April 16, 2015 Prepared by : Ivy Huang/Editor Reviewer : Hong Yang/Supervisor Approved & Authorized Signer : Sam Lv/Manager TRF No. FCC Part 15.235/A Page 3 of 25 Report No. KAD150401005E Ver.1.0 Modified Information Version Summary Revision Date Report No. Ver.1.0 Original Report / KAD150401005E TRF No. FCC Part 15.235/A Page 4 of 25 Report No. KAD150401005E Ver.1.0 Table of Contents 1. GENERAL INFORMATION ................................................................................................ 5 1.1 P RODUCT D ESCRIPTION .................................................................................................................. 5 2. SYSTEM TEST CONFIGURATION .................................................................................... 6 2.1 EUT C ONFIGURATION ...................................................................................................................... 6 2.2 EUT E XERCISE ................................................................................................................................ 6 2.3 T EST P ROCEDURE ........................................................................................................................... 6 2.4 L IMITATION ....................................................................................................................................... 7 2.5 C ONFIGURATION OF T ESTED S YSTEM .............................................................................................. 8 3. SUMMARY OF TEST RESULTS ....................................................................................... 9 4. DESCRIPTION OF TEST MODES ................................................................................... 10 5. TEST FACILITY ............................................................................................................... 11 6. TEST SYSTEM UNCERTAINTY ...................................................................................... 12 7. CONDUCTED EMISSIONS TEST .................................................................................... 13 7.1 M EASUREMENT P ROCEDURE : ........................................................................................................ 13 7.2 T EST SET-UP (B LOCK D IAGRAM OF C ONFIGURATION ) ................................................................... 13 7.3 M EASUREMENT E QUIPMENT U SED : ................................................................................................ 13 7.4 M EASUREMENT R ESULT : ................................................................................................................ 13 7.5 C ONDUCTED M EASUREMENT P HOTOS : .......................................................................................... 13 8. RADIATED EMISSION TEST ........................................................................................... 14 8.1 M EASUREMENT P ROCEDURE ......................................................................................................... 14 8.2 T EST SET-UP (B LOCK D IAGRAM OF C ONFIGURATION ) ................................................................... 14 8.3 M EASUREMENT E QUIPMENT U SED : ................................................................................................ 15 8.4 R ADIATED E MISSION L IMIT ............................................................................................................. 16 8.5 M EASUREMENT R ESULTS ............................................................................................................... 16 8.6 R ADIATED M EASUREMENT P HOTOS : .............................................................................................. 18 9. OCCUPIED BANDWIDTH ................................................................................................ 19 9.1 M EASUREMENT P ROCEDURE ......................................................................................................... 19 9.2 T EST SET-UP (B LOCK D IAGRAM OF C ONFIGURATION ) ................................................................... 19 9.3 M EASUREMENT E QUIPMENT …

Text truncated - open the document above for the full version.