IAJ214SC10A214 Multi-Channel Walkie Talkies

XX-214 IB (English) Printing Size: 165mm x 180mm Folded size: 82.5mm(W) x 60mm(H) Printing color: Black June, 22. 2026 80gsm2 (WF) paper, 1C + 1C Step 1Step 2 Step 3 Controls Limited 1 Year Warranty Information eKids, LLC warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased. Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period, eKids will repair or, at its discretion, replace this product without charge. This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center authorized by Customer Service. If service is required, please contact Customer Service at www.ekids.com/pages/contact to obtain a Return Authorization Number and shipping instructions. A copy of the sales receipt is required to validate in-warranty coverage. Disclaimer of Warranty NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which have been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner.This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser. In no event will eKids or any of its affiliates, contractors, resellers, their officers, directors, shareholders, members or agents be liable to you or any third party for any consequential or incidental damages, any lost profits, actual, exemplary or punitive damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Your acknowledgment and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your eKids products. FCC Information Safety Information for Radios Your wireless handheld portable transceiver contains a low power transmitter. When the talk button is pushed, it sends out radio frequency (RF) signals. The device is authorized to operate at a duty factor not to exceed 50%. In August 1996, the Federal Communications Commissions (FCC) adopted RF exposure guidelines with safety levels for handheld wireless devices. Important FCC RF Exposure Requirements: For body-worn operation, this radio has been tested and meets the FCC RF exposure guidelines when used with accessories supplied or designated for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. Use only the supplied antenna. Unauthorized antennas, modifications or attachments could damage the transmitter and may violate FCC regulations. Normal Position Hold the transmitter approximately 25 mm from your face and speak in a normal voice, with the antenna pointed up and away. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CAN ICES-3 (B)/NMB-3(B) Important Message to Customers Thank you for purchasing one of our many top-quality electronic products Please take a moment to read through these instructions to help you understand the safe and proper way to use this toy to extend its usability. For the Best Possible Performance • Batteries shall be replaced by an adult. • Only use the recommended/supplied batteries or equivalent. • Use alkaline batteries for longer life. • Do not mix old and new batteries, and do not mix alkaline, carbon-zinc or rechargeable nickel-cadmium batteries. • Insert batteries with proper polarity (+/–) as indicated. • Remove exhausted batteries from product. • Recharge rechargeable batteries under adult supervision. • Rechargeable batteries are to be removed from the device before being charged. • Do not attempt to recharge non-rechargeable batteries. • Do not open batteries or …

Text truncated - open the document above for the full version.

Kiddesigns, Inc. Address: 1299 Main Street, Rahway New Jersey United States 07065-0901 Tel.: +1 732 574-9000 Fax: 732 574-3797 E-mail: [email protected] ATTESTATION STATEMENT Date: 2026-06-10 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d)(5)(i), (ii) Filing FCC ID: IAJ214SC10A Kiddesigns, Inc. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. And Kiddesigns, Inc. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. We also certify that, as of the date of the filing of the application, the equipment does not utilize cyber-security or anti-virus software from Kaspersky Lab, Inc, or any of its successors and assignees, which is also on the “covered list”. Sincerely, Signature: Name: David Stetin Title: Product Safety & Compliance Officer

U.S. AGENT LETTER OF ATTESTATION Date: 2026-06-10 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: IAJ214SC10A Kiddesigns, Inc. certifies that, as of the date of the filing of the application, Kiddesigns, Inc. is our designated U.S. agent for service of process for the above referenced FCC ID. Kiddesigns, Inc. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Kiddesigns, Inc. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent and Applicant Information: Name: Kiddesigns, Inc. Address: 1299 Main Street, Rahway New Jersey United States 07065-0901 FRN: 0018783340 Tel.: +1 732 574-9000 Fax: 732 574-3797 E-mail: [email protected] Signed by (printed name): David Stetin Signature:

QA-FR-170-B Kiddesigns, Inc. Address: 1299 Main Street, Rahway New Jersey United States 07065-0901 Tel.: +1 732 574-9000 Fax: 732 574-3797 E-mail: [email protected] FCC Authorization Date: 2026-06-10 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We, Kiddesigns, Inc. hereby authorize Shenzhen Accurate Technology Co., Ltd. to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Shenzhen Accurate Technology Co., Ltd. on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature： Name: David Stetin Title: Product Safety & Compliance Officer

Kiddesigns, Inc. Address: 1299 Main Street, Rahway New Jersey United States 07065-0901 Tel.: +1 732 574-9000 Fax: 732 574-3797 E-mail: [email protected] FCC Confidential Authorization Date: 2026-06-10 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: IAJ214SC10A In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Kiddesigns, Inc. hereby requests long-term confidential treatment of information accompanying this application as outlined below: • Block Diagram • Schematics • Operation Description • Part list & Tune up Procedure The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature： Name: David Stetin Title: Product Safety & Compliance Officer

Kiddesigns, Inc. Address: 1299 Main Street, Rahway, New Jersey, United States 07065-0901 Tel.: +1 732 574-9000 Fax: 732 574-3797 E-mail: [email protected] Product Similarity Declaration Date: 2026-06-10 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir/Madam, We, Kiddesigns, Inc., hereby declare that we have a product named as 214 Multi-Channel Walkie Talkies, model name: BU-214.EEv26, Xi-214MX.EEv26, (FCC ID: IAJ214SC10A) was tested by Shenzhen Accurate Technology Co., Ltd., all the models are identical in electrically, the difference is model number and appearance, otherwise is the same. We confirm that all information above is true, and we’ll be responsible for all the consequences. Please contact me if you have any questions. Sincerely Yours, Signature: Name: David Stetin Title: Product Safety & Compliance Officer

Shenzhen Accurate Technology Co., Ltd. No.: 2604T13923E-RF EUT External Photos External Photos Page 1 / 10 External Photos M/N: BU-214.EEv26 Shenzhen Accurate Technology Co., Ltd. No.: 2604T13923E-RF EUT External Photos External Photos Page 2 / 10 Shenzhen Accurate Technology Co., Ltd. No.: 2604T13923E-RF EUT External Photos External Photos Page 3 / 10 Shenzhen Accurate Technology Co., Ltd. No.: 2604T13923E-RF EUT External Photos External Photos Page 4 / 10 Shenzhen Accurate Technology Co., Ltd. No.: 2604T13923E-RF EUT External Photos External Photos Page 5 / 10 Shenzhen Accurate Technology Co., Ltd. No.: 2604T13923E-RF EUT External Photos External Photos Page 6 / 10 Shenzhen Accurate Technology Co., Ltd. No.: 2604T13923E-RF EUT External Photos External Photos Page 7 / 10 M/N: Xi-214MX.EEv26 Shenzhen Accurate Technology Co., Ltd. No.: 2604T13923E-RF EUT External Photos External Photos Page 8 / 10 Shenzhen Accurate Technology Co., Ltd. No.: 2604T13923E-RF EUT External Photos External Photos Page 9 / 10 Shenzhen Accurate Technology Co., Ltd. No.: 2604T13923E-RF EUT External Photos External Photos Page 10 / 10 ***** END *****

Label and label location

Label and label location

Shenzhen Accurate Technology Co., Ltd. No.: 2604T13923E-RF EUT Internal Photos Internal Photos Page 1 / 11 Internal Photos M/N: BU-214.EEv26 Shenzhen Accurate Technology Co., Ltd. No.: 2604T13923E-RF EUT Internal Photos Internal Photos Page 2 / 11 Shenzhen Accurate Technology Co., Ltd. No.: 2604T13923E-RF EUT Internal Photos Internal Photos Page 3 / 11 Shenzhen Accurate Technology Co., Ltd. No.: 2604T13923E-RF EUT Internal Photos Internal Photos Page 4 / 11 Shenzhen Accurate Technology Co., Ltd. No.: 2604T13923E-RF EUT Internal Photos Internal Photos Page 5 / 11 Shenzhen Accurate Technology Co., Ltd. No.: 2604T13923E-RF EUT Internal Photos Internal Photos Page 6 / 11 ANT M/N: Xi-214MX.EEv26 Shenzhen Accurate Technology Co., Ltd. No.: 2604T13923E-RF EUT Internal Photos Internal Photos Page 7 / 11 Shenzhen Accurate Technology Co., Ltd. No.: 2604T13923E-RF EUT Internal Photos Internal Photos Page 8 / 11 Shenzhen Accurate Technology Co., Ltd. No.: 2604T13923E-RF EUT Internal Photos Internal Photos Page 9 / 11 Shenzhen Accurate Technology Co., Ltd. No.: 2604T13923E-RF EUT Internal Photos Internal Photos Page 10 / 11 Shenzhen Accurate Technology Co., Ltd. No.: 2604T13923E-RF EUT Internal Photos Internal Photos Page 11 / 11 ANT ***** END *****

SAR TEST REPORT Applicant: KiddesignsInc Address: 1299 Main Street, Rahway New Jersey United States 07065-0901 FCC ID: IAJ214SC10A Product Name: 214 Multi-Channel Walkie Talkies Standard(s): 47 CFR Part 2(2.1093) The above device has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: 2603T13923E-20A Date Of Issue: 2026/06/11 Reviewed By: Ken Zong Title: SAR Tester Approved By: Karl Gong Title:SAR Test Supervisor Test Laboratory: China Certification ICT Co., Ltd (Dongguan) Room 101 & 201, Building 2, 256 Pingdong Road, Dalang Town, Dongguan City, Guangdong, China Tel:+86-769-83085888 www.ccttt.com.cn China Certification ICT Co., Ltd (Dongguan) Report No.: 2603T13923E-20A Report Template: RF-FCC SAR-A/0 Page 2 of 54 SAR TEST RESULTS SUMMARY Operation Frequency Bands Model Highest Reported 1g SAR (W/kg) Limits (W/kg) Head Face Up (Gap 25mm) Body-Worn (Gap 0mm) PTT(462.5500-462.7125MHz) BU-214.EEv26 0.63 0.69 1.6 Xi-214MX.EEv260.48 0.69 Maximum Simultaneous Transmission SAR Items Model Head Face Up (Gap 25mm) Body-Worn (Gap 0mm) Limits (W/kg) Sum SAR(W/kg) BU-214.EEv26 N/A N/A 1.6 Xi-214MX.EEv26 N/A N/A EUT Received Date: 2026/05/20 Tested Date: 2026/05/28 Tested Result: Pass China Certification ICT Co., Ltd (Dongguan) Report No.: 2603T13923E-20A Report Template: RF-FCC SAR-A/0 Page 3 of 54 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the Room 101 & 201, Building 2, 256 Pingdong Road, Dalang Town, Dongguan City, Guangdong, China . The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an as ★terisk “ ”. Each test item follows the test standard(s) without deviation. China Certification ICT Co., Ltd (Dongguan) Report No.: 2603T13923E-20A Report Template: RF-FCC SAR-A/0 Page 4 of 54 CONTENTS SAR TEST RESULTS SUMMARY .............................................................................................. 2 DOCUMENT REVISION HISTORY .......................................................................................... 6 1. GENERAL INFORMATION .................................................................................................... 7 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 7 1.2 TEST SPECIFICATION, METHODS AND PROCEDURES ........................................................................ 8 1.3 SAR LIMITS .......................................................................................................................................... 9 2. SAR MEASUREMENT SYSTEM .......................................................................................... 10 3. EQUIPMENT LIST AND CALIBRATION .......................................................................... 17 3.1 EQUIPMENTS LIST & CALIBRATION INFORMATION ....................................................................... 17 4. SAR MEASUREMENT SYSTEM VERIFICATION ........................................................... 18 4.1 LIQUID VERIFICATION ...................................................................................................................... 18 4.2 SYSTEM ACCURACY VERIFICATION ................................................................................................. 19 4.3 SAR SYSTEM VALIDATION DATA ............................................................................................. 20 5. EUT TEST STRATEGY AND METHODOLOGY .............................................................. 21 5.1 TEST POSITIONS FOR FRONT-OF-FACE CONFIGURATIONS .............................................................. 2 1 5.2 TEST POSITIONS FOR BODY-WORN AND OTHER CONFIGURATIONS ................................................ 21 5.3 TEST DISTANCE FOR SAR EVALUATION .......................................................................................... 22 5.4 SAR EVALUATION PROCEDURE ....................................................................................................... 23 6. RADIATED OUTPUT POWER MEASUREMENT ............................................................ 24 6.1 TEST PROCEDURE .............................................................................................................................. 24 6.2 MAXIMUM TARGET OUTPUT POWER ............................................................................................... 24 6.3 TEST RESULTS: .................................................................................................................................. 24 7. SAR MEASUREMENT RESULTS ........................................................................................ 26 7.1 SAR TEST DATA ................................................................................................................................ 26 8. Measurement Variability ......................................................................................................... 27 9. DUT HOLDER PERTURBATIONS ...........................…

Text truncated - open the document above for the full version.

Note: This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA, or any agency of the Federal Government. The information marked “#” is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Customer model name, addresses, names, trademarks etc. are included but no need marked. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. Shenzhen Accurate Technology Co., Ltd. Floor 1, KuMaKe Building, Dongzhou Community, Guangming Street, Guangming District, Shenzhen, Guangdong, China. Tel: +86 755-26503290 Web: www.atc-lab.com Rev:A/4.0(2024/11/01) Page 1 of 31 TR-4-E-R040 TEST REPORT Applicant Name: Kiddesigns Inc Address: 1299 Main Street, Rahway New Jersey United States 07065-0901 Report Number: 2604T13923E-RF-00 FCC ID: IAJ214SC10A Test Standard (s) FCC Part 95 Subpart B Sample Description Product Name: 214 Multi-Channel Walkie Talkies Model No.: BU-214.EEv26, Xi-214MX.EEv26 Trade Mark: eKids Received Date: 2026-05-20 Report Date: 2026-05-28 Test Result: The EUT complied with the standards above. Prepared and Checked By: Approved By: Amanda Wei Bob Liao EMC Engineer EMC Engineer Shenzhen Accurate Technology Co., Ltd. Report No.: 2604T13923E-RF-00 Rev:A/4.0(2024/11/01) Page 2 of 31 TR-4-E-R040 TABLE OF CONTENTS DOCUMENT REVISION HISTORY ................................................................................................................ 4 GENERAL INFORMATION ............................................................................................................................ 5 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ........................................................................ 5 OBJECTIVE ................................................................................................................................................... 5 TEST METHODOLOGY .................................................................................................................................... 5 TEST FACILITY .............................................................................................................................................. 6 MEASUREMENT UNCERTAINTY ....................................................................................................................... 6 SYSTEM TEST CONFIGURATION ............................................................................................................... 7 DESCRIPTION OF TEST CONFIGURATION......................................................................................................... 7 EQUIPMENT MODIFICATIONS .......................................................................................................................... 7 SUPPORT EQUIPMENT LIST AND DETAILS ....................................................................................................... 7 EXTERNAL I/O CABLE .................................................................................................................................... 7 BLOCK DIAGRAM OF TEST SETUP .................................................................................................................. 8 SUMMARY OF TEST RESULTS ................................................................................................................... 9 TEST EQUIPMENT LIST ............................................................................................................................. 10 RF EXPOSURE ............................................................................................................................................ 11 APPLICABLE STANDARD ............................................................................................................................... 11 FREQUENCY STABILITY............................................................................................................................ 12 APPLICABLE STANDARD ............................................................................................................................... 12 TEST PROCEDURE ...................................................................................................................................... 12 TEST DATA ................................................................................................................................................. 13 RF OUTPUT POWER ................................................................................................................................... 14 APPLICABLE STANDARD ............................................................................................................................... 14 TEST PROCEDURE ...................................................................................................................................... 14 TEST DATA ................................................................................................................................................. 15 FRS EMISSION TYPES ............................................................................................................................... 16 APPLICABLE STANDARD ............................................................................................................................... 16 JUDGEMENT ................................................................................................................................................ 16 AUTHOURIZED BANDWIDTH AND EMISSION MASK ............................................................................. 17 APPLICABLE STANDARD .....…

Text truncated - open the document above for the full version.

Shenzhen Accurate Technology Co., Ltd. No.: 2604T13923E-RF-00 Test Photos Test Photos Page 1 / 2 M/N: BU-214.EEv26 Radiated Spurious Emissions Test View (Below 1GHz) Radiated Spurious Emissions Test View (Above 1GHz) Shenzhen Accurate Technology Co., Ltd. No.: 2604T13923E-RF-00 Test Photos Test Photos Page 2 / 2 M/N: Xi-214MX.EEv26 Radiated Spurious Emissions Test View (Below 1GHz) ***** END *****