IAJ212AXX-212 WALKIE TALKIES

LIGHTS & SOUNDS WALKIE TALKIES ÉMETTEURS-RÉCEPTEURS PORTATIFS AVEC EFFETS LUMINEUX ET SONORES Distributed by/Distribué par eKids, LLC. • 1299 Main Street, Rahway, NJ 07065. www.eKids.com • MANUFACTURED IN CHINA./FABRIQUÉ EN CHINE. ™ CONSUMER INFORMATION: PRODUCT: Lights and Sounds Walkie Talkies. AGE GRADE: Ages 3 and over. WARRANTY: One year limited warranty. Visit www.ekids.com/support for details. Valid only in U.S.A. CONTENTS: 2 Walkie Talkies. REQUIRES: 6 X “AAA” (R03) batteries (not included). • 3 x “LR44” Button Cell batteries are included for in store TRY ME demo mode only. • Batteries included in this box are for demonstration purposes only. • Do not mix old and new batteries, and do not mix alkaline, carbon-zinc, or rechargeable nickel-cadmium batteries. • Insert batteries with correct polarity (+/-) as indicated. • Do not attempt to recharge non-rechargeable batteries. • To prevent battery leakage or damage, remove batteries from product if it will not be used for a month or longer. • Use extreme caution handling leaking batteries (avoid direct contact with eyes and skin). If battery leakage comes in contact with eyes, IMMEDIATELY flush the eyes with gently flowing, lukewarm water for at least 30 minutes. If skin contact occurs, wash skin with clear water for at least 15 minutes. Seek medical attention if any symptoms occur. • Follow applicable laws and local regulations for the disposal and transportation of batteries. • DO NOT DISPOSE OF BATTERIES IN A FIRE; BATTERIES MAY EXPLODE OR LEAK. • Product specifications and colors may vary from photo. • Packaging should be kept as it contains important information. INFORMATIONS POUR LE CONSOMMATEUR: PRODUIT : Émetteurs-Récepteurs Portatifs avec Effets Lumineux et Sonores. PUBLIC : 3 ans et plus. GARANTIE : Garantie limitée d'un an. Visiter www.ekids.com/support pour plus de détails. Valide seulement aux États-Unis. CONTENU : 2 émetteurs-récepteurs portatifs. REQUIERT : 6 piles « AAA » (R03) (non incluses). • 3 piles de type bouton « LR44 » sont incluses pour une démonstration en magasin uniquement. • Les piles incluses dans cette boîte sont réservées à des fins de démonstration. • Ne pas mélanger des piles neuves avec des piles usagées, et ne pas mélanger des piles alcalines, des piles au carbone-zinc ou des piles rechargeables au nickel-cadmium. • Insérer les piles avec la polarité adéquate (+/-) comme indiqué. • Ne pas essayer de recharger des piles non rechargeables. • Retirer les piles si l’appareil n’est pas utilisé pendant une période d'un mois ou plus afin de les empêcher de couler ou d’être endommagées. • Faire très attention lors de la manipulation de piles qui coulent (éviter tout contact direct avec les yeux et la peau). Si la pile qui présente un écoulement entre en contact avec les yeux, rincer IMMÉDIATEMENT avec de l’eau courante tiède pendant au moins 30 minutes. En cas de contact avec la peau, laver celle-ci avec de l’eau claire pendant au moins 15 minutes. Consulter un médecin en cas de symptômes. • Se conformer aux lois applicables et règles locales pour l'élimination et le transport des piles. • NE PAS JETER DE PILES DANS UN FEU, CELLES-CI POURRAIENT EXPLOSER OU COULER. • Les caractéristiques et la couleur du produit peuvent différer de celles de la photo. • Conserver l'emballage étant donné qu'il contient d'importantes informations. Battery Installation Note: Batteries should always be installed by an adult. 1. Use a Phillips screwdriver to open the battery compartment door located on the back of the unit. 2. Insert 3 “AAA” (R03) batteries into each Walkie Talkie with + and - terminals as indicated in the compartment. 3. Replace the compartment door and tighten the screw with a Phillips screwdriver. Do not over-tighten the screw. 4. One or more Walkie Talkies include 3 LR44 button cell batteries for in-store demonstration purposes only. Remove these batteries before use. Keep out of reach of children. Dispose of properly. Installation des Piles REMARQUE : Les piles doivent être installées par un adulte uniquement. 1. À l’aide d’un tournevis Philips, ouvrir la trappe du compartiment des piles situé à l’arrière de l’unité. 2. Insérer 3 piles « AAA » (R03) dans chaque émetteur-récepteur portatif avec les bornes + et - tel qu'indiqué dans le compartiment. 3. Replacer la trappe du compartiment et serrer la vis à l'aide d'un tournevis Phillips. Ne pas trop serrer la vis. 4. Un ou plusieurs émetteurs-réceptifs portatifs contient 3 piles boutons LR44 à des fins de démonstration uniquement en magasin. Retirer ces piles avant utilisation. Garder hors de la portée des enfants. Éliminer correctement. DON’T FORGET THE BATTERIES! N'OUBLIEZ PAS LES PILES! 6 x “AAA” BATTERIES REQUIRED (NOT INCLUDED) The batteries included in this box are for demonstration purposes only. 6 PILES « AAA » SONT REQUISES (NON INCLUSES) Les piles incluses dans cette boîte sont réservées à des fins de démonstration. AAAAAAAAA MD-212.FEv0 092298950723 *Works up to 500 feet under ideal conditions. Fonctionne jusqu’à 500 pieds sous des conditions idéales. Easy Push-to-Talk Button/ Bouton de Communication D'accès Facile SFX/SFX Repeat/ Répéter Microphone/ Microphone Light-up Power LED/ Del à Haute Puissance Speaker/ Haut-parleur SEND SPEECH & SOUND EFFECTS FROM ONE WALKIE TALKIE TO ANOTHER ENVOYER DES EFFETS SONORES ET LA VOIX D’UN ÉMETTEUR-RÉCEPTEUR À UN AUTRE CHARACTER GRAPHICS LIGHT UP ÉCLAIRAGE DE DESSIN DE PERSONNAGE SEND/RECEIVE CHARACTER PHRASES, SOUND EFFECTS, AND YOUR VOICE ENVOYER/RECEVOIR DES PHRASES DE PERSONNAGES, DES EFFETS SONORES ET VOTRE VOIX TRY ME! ESSAYEZ -MOI ! 3 + KIDdesigns Created Date: Revision Date: Version: Rahway, NJ Project: Designer: BLISTER ON WHITE PVC SHEET 203L x 45W x 267H (mm) MD-212.FEv0 RD 5 of 5 04.17.20 00.00.00 The information contained herein including, but not limited to, the products, renderings, concepts, and designs comprise intellectual property of KIDdesigns, Ins. and shall be kept confidential and shall not…

Text truncated - open the document above for the full version.

Kiddesigns Inc 1299 Main Street, Rahway NJ 07065-0901 USA Tel: 732-574-9000 Fax: 732-574-3797 Email: [email protected] Product Similarity Declaration 2020-06-03 To Whom It May Concern, We, Kiddesigns Inc, hereby declare that we have a product named as XX-210 WALKIE TALKIES(Model number : MD-212.FEV0) (FCC ID: IAJ212A) was tested by BACL, meanwhile, for our marketing purpose, we would like to list series models (M 1 -212 M 2 M 3 M 4 M 5 M 6 M 7 M 8 M 9 M 10 (M 1 -M 10 , please refer to Model No. Table)) on reports and certificate, all the models are electrically identical. The only difference is the brand and color. No other changes are made to them.

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS

EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS Antenna

Note: This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA* or any agency of the Federal Government. This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “★”. BACL is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with an asterisk ’*’. Customer model name, addresses, names, trademarks etc. are not considered data. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. FCC PART 95 MEASUREMENT AND TEST REPORT For Kiddesigns Inc 1299 Main Street, Rahway, New Jersey 07065-0901 United States FCC ID: IAJ212A Report Type: Original Report Product Type: XX-212 WALKIE TALKIES Report Number: RSZ200508K09-00 Report Date: 2020-06-05 Reviewed By: Nancy Wang RF En gineer Prepared By: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F., West Wing, Third Phase of Wanli Industrial Building, Shihua Road, Futian Free Trade Zone, Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200508K09-00 FCC Part 95 Page 2 of 22 TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) .................................................................................... 3 OBJECTIVE ................................................................................................................................................................... 4 RELATED SUBMITTAL(S)/GRANT(S) ............................................................................................................................. 4 TEST METHODOLOGY .................................................................................................................................................. 4 MEASUREMENT UNCERTAINTY .................................................................................................................................... 4 TEST FACILITY ............................................................................................................................................................. 4 SYSTEM TEST CONFIGURATION .......................................................................................................................... 5 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 5 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 5 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 5 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 5 SUMMARY OF TEST RESULTS ............................................................................................................................... 6 TEST EQUIPMENT LIST ........................................................................................................................................... 7 FCC§2.1093 – RF EXPOSURE ...................................................................................................................................... 8 APPLICABLE STANDARD .............................................................................................................................................. 8 FCC §95.587(b)(1) – ANTENNA REQUIREMENT .................................................................................................. 9 APPLICABLE STANDARD .............................................................................................................................................. 9 ANTENNA CONNECTOR CONSTRUCTION ...................................................................................................................... 9 FCC §2.1046 & §95.567 - RF OUTPUT POWER ..................................................................................................... 10 APPLICABLE STANDARD ............................................................................................................................................ 10 TEST PROCEDURE ...................................................................................................................................................... 10 TEST DATA ................................................................................................................................................................ 10 FCC §2.1047 & §95.575 - MODULATION CHARACTERISTIC .......................................................................... 11 APPLICABLE STANDARD ............................................................................................................................................ 11 TEST PROCEDURE ...................................................................................................................................................... 11 TEST DATA ................................................................................................................................................................ 11 FCC §2.1049 & §95.573 - AUTHOURIZED BANDWIDTH AND EMISSION MASK ........................................ 17 APPLICABLE STANDARD ..................................…

Text truncated - open the document above for the full version.

EXHIBIT D - TEST SETUP PHOTOGRAPHS Radiated Emissions View (Below 1 GHz) Radiated Emissions View (Above 1 GHz)