IAJ210C10Awalkie talkie

Kiddesigns, Inc Address: 1299 Main Street, Rahway, New Jersey, United States 07065-0901 Tel.: +1 732 574-9000 Fax: 732 574-3797 E-mail: [email protected] ATTESTATION STATEMENT Date: 2026-3-30 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d)(5)(i), (ii) Filing FCC ID: IAJ210C10A Kiddesigns, Inc, certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Kiddesigns, Inc, certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. We also certify that, as of the date of the filing of the application, the equipment does not utilize cyber-security or anti-virus software from Kaspersky Lab, Inc, or any of its successors and assignees, which is also on the “covered list”. Sincerely, Signature: Name: David Stetin Title: Product Safety & Compliance Officer

U.S. AGENT LETTER OF ATTESTATION Date: 2026-3-30 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: IAJ210C10A Kiddesigns, Inc, certifies that, as of the date of the filing of the application, Kiddesigns, Inc, is our designated U.S. agent for service of process for the above referenced FCC ID. Kiddesigns, Inc, agrees to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Kiddesigns, Inc, accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent and Applicant Information: Name: Kiddesigns, Inc Address: 1299 Main Street, Rahway, New Jersey, United States 07065-0901 FRN: 0018783340 Tel.: +1 732 574-9000 Fax: 732 574-3797 E-mail: [email protected] Signed by (printed name): David Stetin Signature:

QA-FR-170-B Kiddesigns, Inc Address: 1299 Main Street, Rahway, New Jersey, United States 07065-0901 Tel.: +1 732 574-9000 Fax: 732 574-3797 E-mail: [email protected] FCC Authorization Date: 2026-3-30 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We, Kiddesigns Inc hereby authorize Bay Area Compliance Laboratories Corp. (Shenzhen) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratories Corp. (Shenzhen) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature： Name: David Stetin Title: Product Safety & Compliance Officer

Kiddesigns, Inc Address: 1299 Main Street, Rahway, New Jersey, United States 07065-0901 Tel.: +1 732 574-9000 Fax: 732 574-3797 E-mail: [email protected] FCC Confidential Authorization Date: 2026-3-30 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: IAJ210C10A In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Kiddesigns Inc, hereby, requests long-term confidential treatment of information accompanying this application as outlined below: • Block Diagram • Schematics • Operation Description • Part list & Tune up Procedure The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature： Name: David Stetin Title: Product Safety & Compliance Officer

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601Q23112E-RF-EXP Page 1 of 3 EUT EXTERNAL PHOTOGRAPHS Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601Q23112E-RF-EXP Page 2 of 3 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601Q23112E-RF-EXP Page 3 of 3

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601Q23112E-RF-INP Page 1 of 3 EUT INTERNAL PHOTOGRAPHS Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601Q23112E-RF-INP Page 2 of 3 Ant Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601Q23112E-RF-INP Page 3 of 3

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601Q23112E-RF-00 TR-EM-RF037 Page 10 of 29 Version 3.0 §2.1093 - RF EXPOSURE INFORMATION Applicable Standard According to FCC §2.1093 and §1.1307(b)(3)(i)(B) According to KDB 447498 D04 Interim General RF Exposure Guidance v01 This exemption is applicable to the frequency range between 300 MHz and 6 GHz, with test separation distances between 0.5 cm and 40 cm, and for all RF sources in fixed, mobile, and portable device exposure conditions. Accordingly, a RF source is considered an RF exempt device if its available maximum time averaged (matched conducted) power or its effective radiated power (ERP), whichever is greater, are below a specified threshold. This exemption threshold was derived based on general population 1-g SAR requirements and is detailed in Appendix C. Either SAR-based or MPE-based exemption may be considered for test exemption for fixed, mobile, or portable device exposure conditions; therefore, the contributions from each exemption in conjunction with the measured SAR (Evaluated term) shall be used to determine exemption for simultaneous transmission according to Formula (C.1) [repeated from § 1.1307(b)(3)(ii)(B)]. SAR-based thresholds are derived based on frequency, power, and separation distance of the RF source. The formula defines the thresholds in general for either available maximum time averaged power or maximum time-averaged ERP, whichever is greater. If the ERP of a device is not easily determined, such as for a portable device with a small form factor, the applicant may use the available maximum time-averaged power exclusively if the device antenna or radiating structure does not exceed an electrical length of λ/4. As for devices with antennas of length greater than λ/4 where the gain is not well defined, but always less than that of a half-wave dipole (length λ/2), the available maximum time-averaged power generated by the device may be used in place of the maximum time-averaged ERP, where that value is not known. The separation distance is the smallest distance from any part of the antenna or radiating structure for all persons, during operation at the applicable ERP. In the case of mobile or portable devices, the separation distance is from the outer housing of the device where it is closest to the antenna. The SAR-based exemption formula of § 1.1307(b)(3)(i)(B), repeated here as Formula (B.2), applies for single fixed, mobile, and portable RF sources with available maximum time-averaged power or effective radiated power (ERP), whichever is greater, of less than or equal to the threshold Pth (mW). This method shall only be used at separation distances from 0.5 cm to 40 cm and at frequencies from 0.3 GHz to 6 GHz (inclusive). Pth is given by Formula (B.2). Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601Q23112E-RF-00 TR-EM-RF037 Page 11 of 29 Version 3.0 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601Q23112E-RF-00 TR-EM-RF037 Page 12 of 29 Version 3.0 Measurement Result For worst case: The Greater of Conducted Power Frequency (MHz) Distance (mm) P th (mW) Maximum Conducted Power including Tune-up Tolerance (dBm) Antenna Gain (dBi) dBmmW 467.6125 520.8611-4.011112.59 Note: Max tune-up conducted power # and antenna gain # was declared and provided by the applicant Note: Conducted Power = ERP + 2.15 – Antenna Gain Result: Compliant

Note: The information marked # is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Customer model name, addresses, names, trademarks etc. are included. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report must not be used by the customer to claim product certification, approval, or endorsement by NVLAP or any agency of the U.S. Government. This report may contain data that are not covered by the NVLAP accreditation and are marked with an asterisk “▼”. Bay Area Compliance Laboratories Corp. (Shenzhen) 5F(B-West) , 6F, 7F, the 3rd Phase of Wan Li Industrial Building D, Shihua Rd, FuTian Free Trade Zone, Shenzhen, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn TR-EM-RF037 Page 1 of 29 Version 3.0 TEST REPORT Applicant Name:Kiddesigns Inc Address:1299 Main Street, Rahway New Jersey United States 07065-0901 Report Number:2601Q23112E-RF-00 FCC ID:IAJ210C10A Test Standard (s) FCC PART 95 Sample Description Product Type:walkie talkie Model No.:PK-210Pi.EXv0 Multiple Model(s) No.:N/A Trade Mark:eKids Date Received:2026/02/06 Issue Date:2026/04/09 Test Result:Pass ▲ ▲ In the configuration tested, the EUT complied with the standards above. Prepared and Checked By:Approved By: Bruce LinNancy Wang RF EngineerRF Supervisor Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601Q23112E-RF-00 TR-EM-RF037 Page 2 of 29 Version 3.0 TABLE OF CONTENTS DOCUMENT REVISION HISTORY ..........................................................................................................................3 GENERAL INFORMATION ........................................................................................................................................4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT)......................................................................................4 OBJECTIVE ....................................................................................................................................................................4 TEST METHODOLOGY....................................................................................................................................................4 MEASUREMENT UNCERTAINTY .....................................................................................................................................5 TEST FACILITY ..............................................................................................................................................................5 SYSTEM TEST CONFIGURATION ...........................................................................................................................6 DESCRIPTION OF TEST CONFIGURATION .......................................................................................................................6 EQUIPMENT MODIFICATIONS ........................................................................................................................................6 SUPPORT EQUIPMENT LIST AND DETAILS .....................................................................................................................6 EXTERNAL I/O CABLE...................................................................................................................................................6 BLOCK DIAGRAM OF TEST SETUP .................................................................................................................................6 SUMMARY OF TEST RESULTS ................................................................................................................................8 TEST EQUIPMENT LIST ............................................................................................................................................9 §2.1093 - RF EXPOSURE INFORMATION .............................................................................................................10 MEASUREMENT RESULT..............................................................................................................................................12 FCC §2.1046 & §95.567 - RF OUTPUT POWER......................................................................................................13 APPLICABLE STANDARD .............................................................................................................................................13 TEST PROCEDURE........................................................................................................................................................13 TEST DATA..................................................................................................................................................................13 FCC §2.1047 & §95.575 - MODULATION CHARACTERISTIC ..........................................................................14 APPLICABLE STANDARD .............................................................................................................................................14 TEST BLOCK DIAGRAM ...............................................................................................................................................14 TEST PROCEDURE........................................................................................................................................................14 TEST DATA..................................................................................................................................................................15 FCC §2.1049 & §95.573 & §95.579 - AUTHOURIZED BANDWIDTH AN…

Text truncated - open the document above for the full version.

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601Q23112E-RF-TSP Page 1 of 2 TEST SETUP PHOTOGRAPHS Radiated Emissions View (Below 1GHz) Radiated Emissions View (Above 1 GHz) Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601Q23112E-RF-TSP Page 2 of 2 RF Conducted View