IMATFM-550Multiband FM Airborne Transceiver

1 TFM-550 VHF High/VHF Low/UHF MULTIBAND FM AIRBORNE TRANSCEIVER Installation and Operating Instructions TiL Document No. 99RE262 Rev. A Issue 8 AUGUST 2010 Technisonic Industries Limited 240 Traders Boulevard, Mississauga, Ontario L4Z 1W7 Tel: (905) 890-2113 Fax: (905) 890-5338 www.til.ca Copyright 2010 by Technisonic Industries Limited. All rights reserved. 2 i REVISION HISTORY [ 99RE262 ] REV SECTION - PAGE - DESCRIPTION DATE EDITED BY 99RE262 Rev A Issue 4 CR 08194 Overall No change to fit, form or function. Grammar and spelling check was done, corrected typos, etc. as needed or found. A-Page: Added NOTICE regarding new address change that may appear different throughout this manual. Document was updated from one program format to another. See NOTE below. MAR 2008 FM 99RE262 Rev A Issue 5 CR 08385 A-Page: Add Revision Page to record manual updates Changed Note to FCC Compliance Information Global Changes [Footers changed to reflect Rev changes] [Corrected any spelling errors found] [minor page formatting changes done more spacing under header] NOV 2008 FM 99RE262 Rev A Issue 6 NOTE: New document template/layout/format. - New Title page includes Logo, product photo. - Rev History Approval column change to Edited By. - Frontal matter, Contents and footer updated. - All other data remains unchanged. - Added Support Notes as Appendix B. - Warranty page added. CR 10988 To correct errors introduced in last issue 1-4 FCC testing has updated the temp stability spec Added (-30 to +65ºC) ±2.6 ppm (+65º to +70ºC) 2-2 Replace incorrect Fig 2.1 FEB 2010 FM Rev A Issue 7 A-2 Procedure A freq 39.3855 MHz chg to 39.3850 MHz (typos chg MHz to MHz in table. A-5 Procedure C freq 36.0333 chg to 36.0325 A-6 freq 36.0333 chg to 36.0325 A-7 Procedure E freq 515 MHz chg to 512 MHz B-1 Removed Appendix B “Support Notes” MAR 2010 FM Rev A Issue 8 1-1 Added notes regarding UHF sub bands and the 406 distress beacon band. -3- Added flight test option to glide slope test 1-4 FCC testing has updated the TX temp stability spec: ±2.5 ppm (-30ºC to +55ºC) ±2.6 ppm (-45ºC to -30ºC, +60ºC to +70ºC) AUG 2010 SM ii TFM-550 Installation & Operating Instructions TiL 99RE262 Rev A Issue 8 iii NOTES ESD CAUTION This unit contains static sensitive devices. Wear a grounded wrist strap and/or conductive gloves when handling printed circuit boards. FCC COMPLIANCE INFORMATION This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense. Do not use the TFM-550 in the frequency band 406.0 MHz – 406.1 MHz. This frequency band reserved for distress beacons. WARNING: For compliance with FCC RF Exposure Requirements, the mobile transmitter antennas installation shall comply with the following conditions: 1. The transmitter antennas gain shall not exceed 3 dBi. 2. The transmitter antennas shall be located outside of a vehicle and must not be co-located (kept at a separation distance of more than 20cm from each other when installed). Also they must be installed in such a way that they always maintain a separation distance of more than 90cm from any person during operation. WARNING AND DISCLAIMER Changes or modifications not expressly approved by Technisonic Industries could void the user’s authority to operate the equipment. This manual is designed to provide information about the TFM-550. Every effort has been made to make this manual as complete and accurate as possible. WARRANTY INFORMATION The Model TFM-550 Transceivers are under warranty for one year from date of purchase. Failed units caused by defective parts, or workmanship should be returned to: Technisonic Industries Limited 240 Traders Boulevard Mississauga, Ontario L4Z 1W7 Tel: (905) 890-2113 Fax: (905) 890-5338 TFM-550 Installation & Operating Instructions TiL 99RE262 Rev A Issue 8 iv CERTIFICATION SUMMARY Summary of DO-160C Environmental Testing for Technisonic Model TFM-550, Low-band VHF, High- band VHF and UHF Transceiver: Conditions Section Description of Conducted Tests Temperature and Altitude 4.0 Equipment tested to categories B2 and D1. Vibration 8.0 Equipment is tested without shock mounts to categories B, M and N. Magnetic Effect 15.0 Equipment is class A. Power Input 16.0 Equipment tested to category B. Voltage Spike 17.0 Equipment tested to category B. RF Emission 21.0 Equipment tested to category Z. INSTALLATION APPROVAL NOTE Presently, no TSO standard exists for airborne FM transceivers. To make it easier for installation agencies to provide their customers with an approved installation supported by an effective Airworthiness Approval, Technisonic has secured Supplemental Type Certificate (STC) Approvals (both US and Canadian) on its Airborne FM products for many helicopters currently being delivered in the US and Canada as well as a number of single engine fixed wing aircraft. The above referenced DO-160C test data is also on file and available from Technisonic to support approval requirements in airframes for which Technisonic does not possess an STC. Approved aircraft types are listed in the attachments to the formal STC documents. These STCs are the exclusive property of Technisonic and require the written authority of Technisonic for their use. To assist Factory Authorized Technisonic Dealers in the certification process, we have placed copies of our Canadian and US STCs on our web site along with a letter of authorization for their use. These documents may be dow…

Text truncated - open the document above for the full version.

Technisonic Industries Limited 240 Traders Blvd., Mississauga, Ontario L4Z 1W7 Tel.: (905) 890-2113 Fax: (905) 890-5338 September 13, 2010 FEDERAL COMMUNICATIONS COMMISSION 7435 Oakland Mills Road Columbia, MD 21046 USA FCC ID: IMATFM-550 Dear Sir/Madam, Technisonic understands the following Part 90 VHF spectrum and would like the FCC to certify the entire 136-174MHz spectrum to include the part 90 extended frequencies. This would be done to facilitate the requirements of agencies covered under NTIA spectrum usage. Government agencies complying with the NTIA instead of the FCC must purchase their equipment from private industry manufacturers who are governed by FCC rules. The conflict in spectrum allocation detracts from the options available to government agencies for commercial off the shelf equipment which meets their required specifications such as the requirements stated in the Department of the Interior’s Narrowband digital radio contract. Part 90 extended frequencies: 136-137 MHz Part 87 137-138 MHz Part 25 144-148 MHz Part 97 148-150.05 MHz Part 25 156.2475-157.0375 MHz Part 87 161.575-161.625 MHz Part 22 and 80 161.625-161.775 Part 22 and 74 Part 90 Mobile and Land Mobile frequency bands: 406.1-410.0MHz 410.0-420.0MHz 450.0-454.0MHz 456.0-460.0MHz 460.0-462.5375MHz 462.7375-467.5375MHz 467.7375-470.0MHz 470.0-512.0MHz We understand that it is a violation of FCC rules if the device operates on unauthorized frequencies. Regards Steve McIntosh Engineering Manager

Technisonic Industries Limited 240 Traders Blvd., Mississauga, Ontario L4Z 1W7 Tel.: (905) 890-2113 Fax: (905) 890-5338 September 13, 2010 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Subject: FCC Application for IMATFM-550 To Whom It May Concern: This equipment meets the requirements of the FCC Rules, Part 90.203(e). The operator cannot program and transmit on frequencies other than those programmed by the manufacturer, service or maintenance personnel. We understand that it is a violation of FCC rules if the device operates on unauthorized frequencies. Regards Steve McIntosh Engineering Manager

Technisonic Industries Limited 240 Traders Blvd., Mississauga, Ontario L4Z 1W7 Tel.: (905) 890-2113 Fax: (905) 890-5338 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 March 26, 2010 Subject: FCC Application for IMATFM-550 To Whom It May Concern: We, The undersigned, hereby attest to the fact that we will apply the Verification Authorization procedure to the Class A Unintentional Radiator portion of this composite filing. Regards Steve McIntosh Engineering Manager

November 25, 2010 Ultratech Engineering Labs, Inc. 3000 Bristol Circle Oakville, Ontario L6H 6G4 Subject: Equipment Authorization under FCC 47 CFR, Parts 2 and 90 (Subpart I) - Non-Broadcast Radio Transceivers Operating in the Frequency Band 30-50 MHz, 138-174 MHz & 403-512 MHz Applicant: Technisonic Industries Limited Product: Multiband FM Airborne Transceiver Model: TFM-550 FCC ID: IMATFM-550 Dear Sir/Madam: As appointed agent for Technisonic Industries Limited, we submit the application for certification of the above product. Please review all required documents uploaded to your E-Filing web site. If you have any queries, please do not hesitate to contact us. Yours truly, Dharmajit Solanki Authorized Agent UltraTech Group of Labs FCC TCB & IC CB Ultratech’s Accreditations: 0685 FCC 91038 1309 46390-2049 NVLAP Lab Code 200093-0 SL2-IN-E-1119R Korea KCC-RRL CA2049 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel.: (905) 829-1570 Fax.: (905) 829-8050 Website: www.ultratech-labs.com Email: [email protected]

Technisonic Industries Limited 240 Traders Blvd., Mississauga, Ontario L4Z 1W7 Tel.: (905) 890-2113 Fax: (905) 890-5338 April 7, 2010 Subject: Authority to Act as an Agent Applicant: Technisonic Industries Limited FCC ID: IMATFM-550 Dear Sir/Madam, I hereby appoint UltraTech Engineering Labs Inc. (UltraTech) to act as my agent in preparation of this application for authorization of above equipment under F.C.C. Rules. The applicant hereby certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a “party” for these purposes. I also certify that the information provided, properly describe the device or system for which authorization is required. Regards Steve McIntosh Engineering Manager

Technisonic Industries Limited 240 Traders Blvd., Mississauga, Ontario L4Z 1W7 Tel.: (905) 890-2113 Fax: (905) 890-5338 April 6, 2010 Subject: Confidentiality Letter Applicant: Technisonic Industries Limited FCC ID: IMATFM-550 Dear Sir/Madam: The applicant would like to request the following documents submitted with this application for certification be withheld from public disclosure as per Section 0.457 & 0.459 of FCC Rules. 1. Operational Description 2. Block Diagram 3. Schematics 4. Parts List 5. Tuning Info The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Regards Steve McIntosh Engineering Manager

Annex 2 - External Photos Technisonic Industries Limited Multiband FM Airborne Transceiver, Model TFM-550 FCC ID: IMATFM-550 A2 - 1 Annex 2 - External Photos Technisonic Industries Limited Multiband FM Airborne Transceiver, Model TFM-550 FCC ID: IMATFM-550 A2 - 2 Annex 2 - External Photos Technisonic Industries Limited Multiband FM Airborne Transceiver, Model TFM-550 FCC ID: IMATFM-550 A2 - 3 Annex 2 - External Photos Technisonic Industries Limited Multiband FM Airborne Transceiver, Model TFM-550 FCC ID: IMATFM-550 A2 - 4 Annex 2 - External Photos Technisonic Industries Limited Multiband FM Airborne Transceiver, Model TFM-550 FCC ID: IMATFM-550 A2 - 5

Annex 3 - Internal Photos Technisonic Industries Limited Multiband FM Airborne Transceiver, Model TFM-550 FCC ID: IMATFM-550 A3 - 1 Annex 3 - Internal Photos Technisonic Industries Limited Multiband FM Airborne Transceiver, Model TFM-550 FCC ID: IMATFM-550 A3 - 2 Annex 3 - Internal Photos Technisonic Industries Limited Multiband FM Airborne Transceiver, Model TFM-550 FCC ID: IMATFM-550 A3 - 3 Annex 3 - Internal Photos Technisonic Industries Limited Multiband FM Airborne Transceiver, Model TFM-550 FCC ID: IMATFM-550 A3 - 4 Annex 3 - Internal Photos Technisonic Industries Limited Multiband FM Airborne Transceiver, Model TFM-550 FCC ID: IMATFM-550 A3 - 5 Annex 3 - Internal Photos Technisonic Industries Limited Multiband FM Airborne Transceiver, Model TFM-550 FCC ID: IMATFM-550 A3 - 6 Annex 3 - Internal Photos Technisonic Industries Limited Multiband FM Airborne Transceiver, Model TFM-550 FCC ID: IMATFM-550 A3 - 7 Annex 3 - Internal Photos Technisonic Industries Limited Multiband FM Airborne Transceiver, Model TFM-550 FCC ID: IMATFM-550 A3 - 8 Annex 3 - Internal Photos Technisonic Industries Limited Multiband FM Airborne Transceiver, Model TFM-550 FCC ID: IMATFM-550 A3 - 9 Annex 3 - Internal Photos Technisonic Industries Limited Multiband FM Airborne Transceiver, Model TFM-550 FCC ID: IMATFM-550 A3 - 10 Annex 3 - Internal Photos Technisonic Industries Limited Multiband FM Airborne Transceiver, Model TFM-550 FCC ID: IMATFM-550 A3 - 11 Annex 3 - Internal Photos Technisonic Industries Limited Multiband FM Airborne Transceiver, Model TFM-550 FCC ID: IMATFM-550 A3 - 12 Annex 3 - Internal Photos Technisonic Industries Limited Multiband FM Airborne Transceiver, Model TFM-550 FCC ID: IMATFM-550 A3 - 13 Annex 3 - Internal Photos Technisonic Industries Limited Multiband FM Airborne Transceiver, Model TFM-550 FCC ID: IMATFM-550 A3 - 14 Annex 3 - Internal Photos Technisonic Industries Limited Multiband FM Airborne Transceiver, Model TFM-550 FCC ID: IMATFM-550 A3 - 15 Annex 3 - Internal Photos Technisonic Industries Limited Multiband FM Airborne Transceiver, Model TFM-550 FCC ID: IMATFM-550 A3 - 16 Annex 3 - Internal Photos Technisonic Industries Limited Multiband FM Airborne Transceiver, Model TFM-550 FCC ID: IMATFM-550 A3 - 17 Annex 3 - Internal Photos Technisonic Industries Limited Multiband FM Airborne Transceiver, Model TFM-550 FCC ID: IMATFM-550 A3 - 18 Annex 3 - Internal Photos Technisonic Industries Limited Multiband FM Airborne Transceiver, Model TFM-550 FCC ID: IMATFM-550 A3 - 19 Annex 3 - Internal Photos Technisonic Industries Limited Multiband FM Airborne Transceiver, Model TFM-550 FCC ID: IMATFM-550 A3 - 20 Annex 3 - Internal Photos Technisonic Industries Limited Multiband FM Airborne Transceiver, Model TFM-550 FCC ID: IMATFM-550 A3 - 21 Annex 3 - Internal Photos Technisonic Industries Limited Multiband FM Airborne Transceiver, Model TFM-550 FCC ID: IMATFM-550 A3 - 22 Annex 3 - Internal Photos Technisonic Industries Limited Multiband FM Airborne Transceiver, Model TFM-550 FCC ID: IMATFM-550 A3 - 23 Annex 3 - Internal Photos Technisonic Industries Limited Multiband FM Airborne Transceiver, Model TFM-550 FCC ID: IMATFM-550 A3 - 24

FCC Parts 2 & 90, Subpart I, Non-Broadcast Radio Transceivers Page 106 Multiband FM Airborne Transceiver, Model TFM-550 FCC ID: IMATFM-550 ULTRATECH GROUP OF LABS File #: TIL-064F90 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 November 25, 2010 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: [email protected] , Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) 5.12. RF EXPOSURE REQUIRMENTS [§§ 1.1310 & 2.1091] The criteria listed in the following table shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation. FCC 47 CFR § 1.1310: 5.12.1. Method of Measurements Refer to Sections 1.1310, 2.1091 In order to demonstrate compliance with MPE requirements (see Section 2.1091), the following information is typically needed: (1) Calculation that estimates the minimum separation distance (20 cm or more) between an antenna and persons required to satisfy power density limits defined for free space. (2) Antenna installation and device operating instructions for installers (professional/unskilled users), and the parties responsible for ensuring compliance with the RF exposure requirement (3) Any caution statements and/or warning labels that are necessary in order to comply with the exposure limits (4) Any other RF exposure related issues that may affect MPE compliance FCC Parts 2 & 90, Subpart I, Non-Broadcast Radio Transceivers Page 107 Multiband FM Airborne Transceiver, Model TFM-550 FCC ID: IMATFM-550 ULTRATECH GROUP OF LABS File #: TIL-064F90 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 November 25, 2010 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: [email protected] , Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) Calculation Method of RF Safety Distance: 22 44r EIRP r GP S       Where: P: power input to the antenna in mW EIRP: Equivalent (effective) isotropic radiated power S: power density mW/cm 2 G: numeric gain of antenna relative to isotropic radiator r: distance to centre of radiation in cm 5.12.2. RF Evaluation Evaluation of RF Exposure Compliance Requirements RF Exposure Requirements Compliance with FCC Rules Minimum calculated separation distance between antenna and persons required: *89.4 cm Manufacturer’ instruction for separation distance between antenna and persons required: 90 cm Antenna installation and device operating instructions for installers (professional/unskilled users), and the parties responsible for ensuring compliance with the RF exposure requirement Antenna installation and device operating instructions shall be provided to installers to maintain and ensure compliance with RF exposure requirements. Caution statements and/or warning labels that are necessary in order to comply with the exposure limits Refer to User’s Manual for RF Exposure Information. Any other RF exposure related issues that may affect MPE compliance None. *The minimum separation distance between the antenna and bodies of users are calculated using the following formula: RF EXPOSURE DISTANCE LIMITS S EIRP S GP r      44 S = 0.2 mW/cm 2 G = Maximum Gain of External Antenna = 3 dBi EIRP = 40.03 + 3.0 = 43.03 dBm = 10 43.03/10 mW = 20090.9 mW (Worst Case) (Minimum Safe Distance, r) = cm S EIRP 41.89 )2.0(4 20090.9 4      TFM-550 Installation & Operating Instructions TiL 99RE262 Rev A Issue 8 iii NOTES ESD CAUTION This unit contains static sensitive devices. Wear a grounded wrist strap and/or conductive gloves when handling printed circuit boards. FCC COMPLIANCE INFORMATION This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense. Do not use the TFM-550 in the frequency band 406.0 MHz – 406.1 MHz. This frequency band reserved for distress beacons. WARNING: For compliance with FCC RF Exposure Requirements, the mobile transmitter antenna installation shall comply with the following conditions: 1. The transmitter antenna gain shall not exceed 3 dBi. 2. The transmitter antenna is required to be located outside of a vehicle and kept at a separation distance of 90 cm or more between the transmitter antenna of this device and persons during operation. WARNING AND DISCLAIMER Changes or modifications not expressly approved by Technisonic Industries could void the user’s authority to operate the equipment. This manual is designed to provide information about the TFM-550. Every effort has been made to make this manual as complete and accurate as possible. WARRANTY INFORMATION The Model TFM-550 Transceivers are under warranty for one year from date of purchase. Failed units caused by defective parts, or workmanship should be returned to: Technisonic Industries Limited 240 Traders Boulevard Mississauga, Ontario L4Z 1W7 Tel: (905) 890-2113 Fax: (905) 890-5338 TECHNISONIC INDUSTRIES LIMITED www.til.ca TFM-550 Installation & Operating Instructions TiL 99RE262 Rev A Issue 8 3-1 SECTION 3 – INSTALLATION INSTRUCTIONS 3.1 GENERAL This section contains information and instructions for the correct installation of the TFM-550, VHF/FM Transceiver. Make certain that the correct frequencies are pre-programmed in accordance with the equipment user's valid FCC operator's license, prior to in…

Text truncated - open the document above for the full version.

Multiband FM Airborne Transceiver Model No.: TFM-550 FCC ID: IMATFM-550 Applicant: Technisonic Industries Limited 240 Traders Blvd. E. Mississauga, Ontario Canada L4Z 1W7 Tested in Accordance With Federal Communications Commission (FCC) 47 CFR Parts 2 and 90 (Subpart I) UltraTech's File No.: TIL-064F90 This Test report is Issued under the Authority of Tri M. Luu, BASc. Vice President of Engineering UltraTech Group of Labs Date: November 25, 2010 Report Prepared by: Dharmajit Solanki Issued Date: November 25, 2010 Tested by: Wei Wu, RFI/EMC Technician Test Dates: May 1 2009 to Feb 19, 2010  The results in this Test Report apply only to the sample(s) tested, and the sample tested is randomly selected.  This report must not be used by the client to claim product endorsement by NVLAP or any agency of the US Government. UltraTech 3000 Bristol Circle, Oakville, Ontario, Canada, L6H 6G4 Tel.: (905) 829-1570 Fax.: (905) 829-8050 Website: www.ultratech-labs.com , Email: [email protected], Email: [email protected] FCC Korea KCC-RRL 91038 1309 46390-2049 NVLAP Lab Code 200093-0 SL2-IN-E-1119R CA2049 FCC Parts 2 & 90, Subpart I, Non-Broadcast Radio Transceivers Contents i Multiband FM Airborne Transceiver, Model TFM-550 FCC ID: IMATFM-550 ULTRATECH GROUP OF LABS File #: TIL-064F90 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 November 25, 2010 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: [email protected] , Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) TABLE OF CONTENTS EXHIBIT 1. INTRODUCTION ......................................................................................................................................... 1 1.1. SCOPE......................................................................................................................................................................... 1 1.2. RELATED SUBMITTAL(S)/GRANT(S) .................................................................................................................. 1 1.3. NORMATIVE REFERENCES ................................................................................................................................... 1 EXHIBIT 2. PERFORMANCE ASSESSMENT .............................................................................................................. 2 2.1. CLIENT INFORMATION .......................................................................................................................................... 2 2.2. EQUIPMENT UNDER TEST (EUT) INFORMATION ............................................................................................ 2 2.3. EUT’S TECHNICAL SPECIFICATIONS ................................................................................................................. 3 2.4. LIST OF EUT’S PORTS............................................................................................................................................. 3 EXHIBIT 3. EUT OPERATING CONDITIONS AND CONFIGURATIONS DURING TESTS ............................... 4 3.1. CLIMATE TEST CONDITIONS ............................................................................................................................... 4 3.2. OPERATIONAL TEST CONDITIONS & ARRANGEMENT FOR TEST SIGNALS............................................. 4 3.3. GENERAL BLOCK DIAGRAM FOR TEST SETUP ............................................................................................... 5 EXHIBIT 4. SUMMARY OF TEST RESULTS ............................................................................................................... 6 4.1. LOCATION OF TESTS.............................................................................................................................................. 6 4.2. APPLICABILITY & SUMMARY OF EMISSION TEST RESULTS ....................................................................... 6 4.3. MODIFICATIONS INCORPORATED IN THE EUT FOR COMPLIANCE PURPOSES....................................... 7 4.4. DEVIATION OF STANDARD TEST PROCEDURES ............................................................................................. 7 EXHIBIT 5. MEASUREMENTS, EXAMINATIONS & TEST DATA FOR EMC EMISSIONS............................... 8 5.1. TEST PROCEDURES................................................................................................................................................. 8 5.2. MEASUREMENT UNCERTAINTIES ...................................................................................................................... 8 5.3. MEASUREMENT EQUIPMENT USED ................................................................................................................... 8 5.4. ESSENTIAL/PRIMARY FUNCTIONS AS DECLARED BY THE MANUFACTURER........................................ 8 5.5. RF POWER OUTPUT [§§ 2.1046 & 90.205]............................................................................................................. 9 5.6. FREQUENCY STABILITY [§§ 2.1055 & 90.213].................................................................................................. 11 5.7. AUDIO FREQUENCY RESPONSE [§ 2.1047(A)] ................................................................................................. 14 5.8. MODULATION LIMITING [§§ 2.1047(B) & 90.210]............................................................................................ 25 5.9. OCCUPIED BANDWIDTH & EMISSION MASK [§§ 2.1049, 90.209 & 90.210] ................................................ 36 5.10. TRANSMITTER ANTENNA POWER SPURIOUS/HARMONIC CONDUCTED EMISSIONS [§§ 2.1051 & 90.210]................................................................................................................................................................................... 83 5.11. TRANSMITTER SPURIOUS/HARMONIC RADIATED EMISSIONS [§§ 2.1053 & 9…

Text truncated - open the document above for the full version.

ANNEX 1 - TEST SETUP PHOTOS Technisonic Industries Limited Multiband FM Airborne Transceiver, Model TFM-550 FCC ID: IMATFM-550 A1 - 1 Radiated Emissions at 3 m Distance ANNEX 1 - TEST SETUP PHOTOS Technisonic Industries Limited Multiband FM Airborne Transceiver, Model TFM-550 FCC ID: IMATFM-550 A1 - 2 Radiated Emissions at 3 m Distance ANNEX 1 - TEST SETUP PHOTOS Technisonic Industries Limited Multiband FM Airborne Transceiver, Model TFM-550 FCC ID: IMATFM-550 A1 - 3 Radiated Emissions at 3 m Distance