J9C-65VF438P2WLAN USB Stick a/b/g/n Adapter

Installation and User Guide: WFB400 Windows Wireless LAN Client November 2007 Installation and User Guide WFB400 Windows Wireless LAN Client Adapters Copyright © 2007 by QUALCOMM, Inc. All Rights Reserved. No part of this work may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of unless such copying is expressly permitted by U.S. copyright law. Page 2 of 29 Installation and User Guide: WFB400 Windows Wireless LAN Client Contents CONTENTS .................................................................................................................................................................3 PREFACE ....................................................................................................................................................................4 OVERVIEW ................................................................................................................................................................6 Device Types...................................................................................................................................................6 Shipping Package Contents.......................................................................................................................6 System Requirements.................................................................................................................................6 Inserting and Removing the Wireless LAN Client Adapter.............................................................6 Checking Adapter Activity ............................................................................................................................................... 7 Installing the Wireless LAN Client Adapter Driver............................................................................7 Installation Steps ............................................................................................................................................................... 7 Confirming the Installation........................................................................................................................9 Verifying the Installation — Windows XP ..................................................................................................................... 10 Uninstalling the Windows Wireless Drivers.......................................................................................12 INTRODUCTION TO WIRELESS ZERO CONFIGURATION .........................................................................14 Service Set Identifiers...............................................................................................................................14 Wireless Bands and Channels.................................................................................................................14 WZC Overview..............................................................................................................................................15 Accessing WZC.............................................................................................................................................15 Wireless Security.........................................................................................................................................18 CONFIGURATION OVERVIEW ...........................................................................................................................20 REGULATORY ........................................................................................................................................................22 GLOSSARY ...............................................................................................................................................................23 INDEX ........................................................................................................................................................................29 Installation and User Guide: WFB400 Windows Wireless LAN Client Page 3 of 29 Preface This guide explains how to install and configure the Windows Wireless LAN Client Adapter, which provides PC laptop and desktop users with access to 802.11 access points. The guide is intended for business and consumer users who want to install and configure QUALCOMM WFB/WFR4xxx-based Windows Wireless LAN Client Adapters quickly and easily. It is also intended for users who are interested in advanced configuration and troubleshooting. The products include the following device options: ¾ PC Card (CardBus) adapter for use in laptop and notebook computers ¾ PCI Express (PCIe) miniCard adapter for use in laptop computer PCIe minCard expansion slots ¾ USB (Universal Serial Bus) adapter for use in laptop, notebook and desktop computers. This guide assumes that the PC used with QUALCOMM WFB/WFR4xxx-based Windows Wireless LAN Client Adapters is configured to support Microsoft Wireless Zero Configuration (WZC) 1 . The Client Utility, a software tool designed to provide basic configuration options for the device, is shipped with each unit along with the device drivers. Organization of this Guide This guide consists of the following chapters: Chapter 1 describes the features of the Windows Wireless LAN Client Adapter and explains how to install it. Chapter 2 provides an overview of Microsoft Wireless Zero Configuration Chapter 3 describes configuration settings available through Microsoft Device Manager Advanced Properties Page Glossary defines terms that apply to wireless and networking technology and the product suite. Conventions Used in this Guide This guide uses the following conventions for instructions and information. Notes, Cautions, and Warnings Notes, cautions, and time-saving tips use the following conventions and symbols. NOTE: Notes contain helpf…

Text truncated - open the document above for the full version.

FCC ID: J9C-65VF438P2 Request for transmitter modular approval Transmitter Module Characteristics Item Requirements EUT 1 Have its own RF shielding Device is equipped with Metal shielding to cover RF section. Refer to external photos 2 Have buffered modulation/data inputs (if such inputs are provided), All inputs to the modules are buffered through logic or microprocessor inputs. 3 Have it own power supply regulation Internal 5V power regulator. Refer to Block diagram 4 Meet the antenna requirements of Section 15.203 Device is equipped with unique antenna ( Murata MMCX) connector. Refer to external photos 5 Be tested in a stand-alone configuration, i.e., the antenna, AC or DC power and data input/output lines must be connected to the module but, the module must not be inside another case during testing Device was tested outside the laptop for modular approval. Refer to setup photos. 6 Be labeled with its own FCC ID number, and if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. Two proposed FCC ID label format are included in the filing. One of label is to be placed on the module and the other label is to be placed on the outside of system. Refer to FCC ID label format and location file. 7 The modular transmitter is manufactured so that the user cannot influence the operation of the transmitter that will operate outside of the scope of the regulations. Refer to “User’s Guide” Exhibit 8 Address compliance with the Commission's RF exposure limits in Sections 1.1310 and 2.1093. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF exposure compliance in accordance with Section 15.247(b)(4). SAR test was performed on three portable laptops, Host 1: IBM / 1951-I3V Host 2: Dell / 640m Host 3: ASUS / M5200AE

Page 1 of 2 ____________________________________________________________________________________________ QUALCOMM Incorporated +1 858 587-1121 5775 Morehouse Drive www.cdmatech.com/products/wlan.jsp San Diego, CA 92121-1714 U.S.A. Date: January 21, 2008 Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize Ms. Shirley Kang/Application Examiner of Compliance Engineering Services, Inc., d.b.a. Compliance Certification Services and hereafter referred to as CCS, to act on our behalf in all manners relating to application for equipment authorization for FCC ID: J9C-65VF438P2, including signing of all documents relating to these matters. Any and all acts carried out by Ms. Shirley Kang of CCS on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing CCS as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product Page 2 of 2 certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Paul Guckian VP, Engineering, Regulatory Group Release certification to: Daniel Teng Engineer, Sr Staff/Mgr QUALCOMM, Inc.

1 _____________________________________________________________________________________________ QUALCOMM Incorporated 5775 Morehouse Dr +1 858 587-1121 San Diego, CA 92121 www.cdmatech.com/products/wlan.jsp Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: J9C-65VF438P2 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments: External Photos Internal Photos Test Setup Photos User Manual Product Specification It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. 2 Best Regards, Paul Guckian VP, Engineering, Regulatory Group QUALCOMM Inc.

Chris Harvey From: shirley.kang [[email protected]] Sent: Tuesday, January 29, 2008 5:19 AM To: [email protected] Cc: [email protected]; [email protected] Subject: Re:Qualcomm Incorporated, FCC ID: J9C-65VF438P2, Assessment NO.: AN08T7543 & AN08T7544, Notice#1 Attachments: Modular approval request letter revised on 2008-01-29.pdf; 71108001-RP1-1(65-VF438-P2) FCC Part 15E_0129_Part II.pdf; 71108001-RP1-1(65-VF438-P2) FCC Part 15E_0129_Part I.pdf; FCC TOTAL MODE POWER (AVG+PK).xls 1/30/2008 Dear Chris, Please see the following responses in blue. Best regards, Shirley Kang Compliance Certification Services M: 886-938-019-600 E-mail: [email protected] T: 886-2-2217-0894 ext.12 F: 886-2-2217-1029 Dear Shirley Kang, You are listed as the Technical Contact for the above referenced TCB application. The following item(s) need(s) to be resolved before the review can be continued: 1. The Specification sheet indicates that the power is 14dBm per chain max power, or 17dBm total in the 2.4GHz band, and 12dBm per chain in the 5GHz band, or15dBm total; however, the test report documents higher power than the specification sheet. Please either explain or correct (please keep in mind the FCC allowed tolerance of +/-0.5dB). -->Reply: The maximum transmit output power shown on the product spec. is "AVG" value. And the output power value shown on FCC Part 15.247 & 15.407 reports are "PEAK" value. <charvey- [email protected]> 2008/01/29 04:17 AM ¦¬¥ó¤H¡G <[email protected]> °Æ¥»§Û°e¡G <[email protected]>, <[email protected]> ¥D¦®¡G Qualcomm Incorporated, FCC ID: J9C- 65VF438P2, Assessment NO.: AN08T7543 & AN08T7544, Notice#1 Please see attached power table for reference. 2. The Modular Approval letter indicates that this is Limited Modular Approval since this device was tested inside the laptop, when in fact this device only has a connector that is inside the laptop. The Transmitter is located outside the laptop computer, therefore making this a Full Modular Approval. Please note that the FCC SAR policies may not require 3-host testing (you should look further into the policy for future testing). -->Reply: Please see the revised modular approval letter. 3. The UNII report page 180 of 323 has a typo in the compliance margin of the Peak Excursion test of Chain0 that should be corrected. -->Reply: We revised the test report and divided it into two parts. Please see attachment. The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information within 30 days of the original e-mail date may result in application dismissal and forfeiture of the filing fee. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the e-mail address listed below the name of the sender. Best regards, Chris Harvey [email protected] 1/30/2008

_____________________________________________________________________________________________ QUALCOMM Incorporated +1 858 587-1121 5775 Morehouse Drive www.cdmatech.com/products/wlan.jsp San Diego, CA 92121-1714 U.S.A. January 21, 2008 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: Ad Hoc Attestation for FCC ID: J9C-65VF438P2 Please be advised that as a Microsoft Windows client, the 65-VF438-P2 USB stick and drivers which are distributed only in binary form by QUALCOMM to authorized ODMs/OEMs as well as distributed by QUALCOMM with 65-VF438-P2 samples, support Ad Hoc (IBSS) within those countries governed by FCC regulatory statues on only those non-DFS (Dynamic Frequency Selection) bounded channels allowable by FCC statues. Sincerely, Paul Guckian VP, Engineering, Regulatory Group QUALCOMM Inc.

External view, Top side 65-VF438-P2 (US422D_H) FCC ID: J9C-65VF438P2 External view, Bottom side 65-VF438-P2 (US422D_H) FCC ID: J9C-65VF438P2

QUALCOMM, Inc. QUALCOMM RoHS WLAN USB stick a/b/g/n Adapter for 2.4/5 GHz Client Applications FCC ID: J9C-65VF438P2 IC ID: 2723-65VF438P2 Module Label Internal on Module FCC ID: J9C-65VF438P2 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference than may cause undesired operation IC ID: 2723-65VF438P2 Model No.: 65-VF438-P2 Placement of Internal Module Label Modular Label External on USB housing Qualcomm Part Number 65-VF438-P2 Contains Transmitter Module FCC ID: J9C-65VF438P2 Placement of External (bottom of USB stick) Modular Label

Internal view, Top side 65-VF438-P2 (US422D_H) FCC ID: J9C-65VF438P2 Internal view, Bottom side 65-VF438-P2 (US422D_H) FCC ID: J9C-65VF438P2

Document Code: Version: 1Page - Mag.Layers Scientific-Techinics 1 MAG.LAYERS 美磊科技股份有限公司 MAG. LAYERS SCIENTIFIC-TECHNICS CO., LTD HEAD OFFICE / HSINCHU PLANT No 18, Tz-Chiang Road, Hsin-Chu Industrial Park, Hsin-Chu, Taiwan TEL: +886-3-5972488 FAX: +886-3-5972477 http://www.maglayers.com.tw E-mail：[email protected] CUSTOMER : Qualcomm PART NO. : DBA-7040-25GS3- A1 AUTHORIZED BY : Jacky Cheng DATE : 2007/09/04 Document Code: Version: 1Page - Mag.Layers Scientific-Techinics 2 MAG.LAYERS 1. Experimental Setup ¦Measurement Item : a. Return loss b. Radiation pattern ¦Return Loss : a. Instrument : vector network analyzer – Agilent N5230A b. Calibration method : SOLT ¦3D Radiation Pattern : a. Instrument: Satimo StarLab X Z x Y Antenna1 (S33) Antenna2 (S44) Document Code: Version: 1Page - Mag.Layers Scientific-Techinics 3 MAG.LAYERS 2. Return Loss Return Loss Isolation Document Code: Version: 1Page - Mag.Layers Scientific-Techinics 4 MAG.LAYERS 2.4-13.387 2.45-16.853 2.5-10.606 4.9-5.1298 5.2-9.0356 5.5-18.451 5.9-6.9615 2.4-13.525 2.45-28.284 2.5-12.051 4.9-5.4049 5.2-8.8805 5.5-33.861 5.9-6.6022 2.4-11.493 2.45-11.297 2.5-12.069 4.9-16.242 5.2-16.223 5.5-16.062 5.9-19.764 Antenna Frequency(GHz) Return Loss(db) Antenna 1(S33) Antenna2(S44) Isolation(S43) Document Code: Version: 1Page - Mag.Layers Scientific-Techinics 5 MAG.LAYERS 3.Antenna Matching Circuit Diagram Antenna 1nH I/O 1.5nHGround Antenna1 (S33) Antenna2 (S44) Antenna 1nH I/O 1.2nHGround 0.5pFGround 0.5pFGround Document Code: Version: 1Page - Mag.Layers Scientific-Techinics 6 MAG.LAYERS Y-Z Plane 4. Radiation Patterns Antenna1(Low) Horizontal Polarization Frequency(GHz) Max Value(dBi)Average(dBi) 2.4 -0.75-6.25 2.45 -1.72-6.88 2.5 -1.54-7.15 Document Code: Version: 1Page - Mag.Layers Scientific-Techinics 7 MAG.LAYERS Y-Z Plane Vertical Polarization Frequency(GHz) Max Value(dBi)Average(dBi) 2.4 -3.42-6.24 2.45 -3.23-6 2.5 -4.89-7.14 Document Code: Version: 1Page - Mag.Layers Scientific-Techinics 8 MAG.LAYERS Y-Z Plane TOTAL Frequency(GHz) Max Value(dBi)Average(dBi) 2.40.17-3.23 2.45-0.59-3.41 2.5-0.74-4.13 Document Code: Version: 1Page - Mag.Layers Scientific-Techinics 9 MAG.LAYERS X-Z Plane Horizontal Polarization Frequency(GHz) Max Value(dBi)Average(dBi) 2.41.23-4.61 2.451.06-4.77 2.51.02-5.94 Document Code: Version: 1Page - Mag.Layers Scientific-Techinics 10 MAG.LAYERS X-Z Plane Vertical Polarization Frequency(GHz) Max Value(dBi)Average(dBi) 2.4 -19.91-22.25 2.45-18.68-21.01 2.5-20.28-22.97 Document Code: Version: 1Page - Mag.Layers Scientific-Techinics 11 MAG.LAYERS X-Z Plane TOTAL Frequency(GHz) Max Value(dBi)Average(dBi) 2.4 1.26-4.54 2.451.08-4.67 2.51.03-5.2 Document Code: Version: 1Page - Mag.Layers Scientific-Techinics 12 MAG.LAYERS X-Y Plane Horizontal Polarization Frequency(GHz) Max Value(dBi)Average(dBi) 2.4-7.94-11.16 2.45-7.13-10.6 2.5-6.49-9.81 Document Code: Version: 1Page - Mag.Layers Scientific-Techinics 13 MAG.LAYERS X-Y Plane Vertical Polarization Frequency(GHz) Max Value(dBi)Average(dBi) 2.4-7.68-8.67 2.45-5.4-9.03 2.5-5.2-9.16 Document Code: Version: 1Page - Mag.Layers Scientific-Techinics 14 MAG.LAYERS X-Y Plane TOTAL Frequency(GHz) Max Value(dBi)Average(dBi) 2.4 -5.05-6.73 2.45 -4.88-6.73 2.5 -4.5-6.47 Document Code: Version: 1Page - Mag.Layers Scientific-Techinics 15 MAG.LAYERS Y-Z Plane Horizontal Polarization Antenna1(High) Frequency(GHz) Max Value(dBi)Average(dBi) 4.9-2.57-6.77 5.2-1.94-6.82 5.5-3.65-7.79 5.9-4.94-8.87 Document Code: Version: 1Page - Mag.Layers Scientific-Techinics 16 MAG.LAYERS Y-Z Plane Vertical Polarization Frequency(GHz) Max Value(dBi)Average(dBi) 4.9-3.24-8.1 5.2-0.83-5.96 5.5-0.69-5.22 5.90.43-5.48 Document Code: Version: 1Page - Mag.Layers Scientific-Techinics 17 MAG.LAYERS Y-Z Plane TOTAL Frequency(GHz) Max Value(dBi)Average(dBi) 4.9-2.16-4.37 5.2-0.69-3.35 5.5-0.46-3.3 5.90.58-3.83 Document Code: Version: 1Page - Mag.Layers Scientific-Techinics 18 MAG.LAYERS X-Z Plane Horizontal Polarization Frequency(GHz) Max Value(dBi)Average(dBi) 4.9-1.71-5.16 5.2-0.1-3.62 5.51.81-3.4 5.92.32-4.29 Document Code: Version: 1Page - Mag.Layers Scientific-Techinics 19 MAG.LAYERS X-Z Plane Vertical Polarization Frequency(GHz) Max Value(dBi)Average(dBi) 4.9-12.16-18.86 5.2-15.5-21.66 5.5-13.82-18.64 5.9-8.42-15.46 Document Code: Version: 1Page - Mag.Layers Scientific-Techinics 20 MAG.LAYERS X-Z Plane TOTAL Frequency(GHz) Max Value(dBi)Average(dBi) 4.9-1.59-4.97 5.2-0.04-3.55 5.51.85-3.27 5.92.34-3.97 Document Code: Version: 1Page - Mag.Layers Scientific-Techinics 21 MAG.LAYERS X-Y Plane Horizontal Polarization Frequency(GHz) Max Value(dBi)Average(dBi) 4.9-11.87-16.12 5.2-6.26-10.19 5.5-6.19-9.89 5.9-4.87-9.59 Document Code: Version: 1Page - Mag.Layers Scientific-Techinics 22 MAG.LAYERS X-Y Plane Vertical Polarization Frequency(GHz) Max Value(dBi)Average(dBi) 4.9-2.21-6.17 5.2-0.42-5.1 5.5-2.09-5.98 5.9-5.9-9.68 Document Code: Version: 1Page - Mag.Layers Scientific-Techinics 23 MAG.LAYERS X-Y Plane TOTAL Frequency(GHz) Max Value(dBi)Average(dBi) 4.9-2.2-5.75 5.2-0.37-3.93 5.5-1.94-4.5 5.9-2.86-6.62 Document Code: Version: 1Page - Mag.Layers Scientific-Techinics 24 MAG.LAYERS Y-Z Plane Horizontal Polarization Antenna2(Low) Frequency(GHz) Max Value(dBi)Average(dBi) 2.4-1.45-6.47 2.45-1.23-6.35 2.5-1.17-6.74 Document Code: Version: 1Page - Mag.Layers Scientific-Techinics 25 MAG.LAYERS Y-Z Plane Vertical Polarization Frequency(GHz) Max Value(dBi)Average(dBi) 2.4-4.27-6.4 2.45-3.72-6.09 2.5-4.18-6.29 Document Code: Version: 1Page - Mag.Layers Scientific-Techinics 26 MAG.LAYERS Y-Z Plane TOTAL Frequency(GHz) Max Value(dBi)Average(dBi) 2.4-0.06-3.42 2.450.11-3.2 2.50.15-3.49 Document Code: Version: 1Page - Mag.Layers Scientific-Techinics 27 MAG.LAYERS X-Z Plane Horizontal Polarization Frequency(GHz) Max Value(dBi)Average(dBi) 2.41.31-4.91 2.451.51-4.77 2.51.2-5.17 Document Code: Version: 1Page - Mag.Layers Scientific-Techinics 28 MAG.LAYERS X-Z Plane Vertical Polarization Frequency(GHz) Max Value(dBi)Aver…

Text truncated - open the document above for the full version.

65-VF438-P2 802.11a/b/g/n USB stick Adapter Product Specification Rev 0.2 • http://www.cdmatech.com/products/wlan.jsp • Page 1 of 17 QUALCOMM Confidential Information 65-VF438-P2 USB stick Adapter (US422D_H) Product Specification Published December 2007 65-VF438-P2 802.11a/b/g/n USB stick Adapter Product Specification Rev 0.2 • http://www.cdmatech.com/products/wlan.jsp • Page 2 of 17 QUALCOMM Confidential Information Table of Contents Product Description ............................................................................................................ 4 Chipset ................................................................................................................................ 4 Key Features and Benefits .................................................................................................. 4 Additional Hardware Features ............................................................................................ 4 Data Rates Supported.......................................................................................................... 5 Modulation Types Supported.............................................................................................. 6 Security Features................................................................................................................. 6 Quality of Service (QoS) and Value-Added MAC Features .............................................. 6 Antenna Connections .......................................................................................................... 6 Manufacturing-Ready Software.......................................................................................... 6 Interfaces............................................................................................................................. 6 LEDs ................................................................................................................................... 6 Physical ............................................................................................................................... 6 Operating Voltage ...............................................................................................................6 Recommended Operating Temperature Range ................................................................... 6 Recommended Operating Humidity Range ........................................................................ 7 Recommended Storage Temperature Range....................................................................... 7 Recommended Storage Humidity Range............................................................................ 7 Peak Power Consumption ................................................................................................... 7 Typical Receiver Sensitivity ............................................................................................... 8 Operating Frequencies/Bands ........................................................................................... 15 Maximum Transmit Output Power ................................................................................... 16 Physical Dimensions ......................................................................................................... 16 Table of Figures Figure 1 65-VF438-P2 USB stick Adapter (top view, without case—top-- and with case-- bottom) ................................................................................................................................ 5 Figure 2 PCB and Shield Mechanical Drawing (dimensions in millimeters)................... 17 Table of Tables Table 1 2.4 GHz Power Consumption ................................................................................ 7 Table 2 5 GHz Power Consumption ................................................................................... 8 Table 3 802.11b Rx Sensitivity.......................................................................................... 8 Table 4 802.11g Rx sensitivity .......................................................................................... 9 Table 5 802.11a Rx sensitivity......................................................................................... 10 Table 6 802.11n 20 MHz 2.4 GHz Rx sensitivity............................................................ 11 Table 7 802.11n 40MHz 2.4 GHz Rx sensitivity............................................................. 12 Table 8 802.11n 20 MHz 5 GHz Rx sensitivity............................................................... 13 Table 9 802.11n 40 MHz 5 GHz Rx sensitivity............................................................... 14 65-VF438-P2 802.11a/b/g/n USB stick Adapter Product Specification Rev 0.2 • http://www.cdmatech.com/products/wlan.jsp • Page 3 of 17 QUALCOMM Confidential Information Table 10 Operating Frequencies/Bands ............................................................................ 15 Table 11 Tx Power 2.4 GHz ............................................................................................ 16 Table 12 Tx Power 5 GHz ................................................................................................ 16 65-VF438-P2 802.11a/b/g/n USB stick Adapter Product Specification Rev 0.2 • http://www.cdmatech.com/products/wlan.jsp • Page 4 of 17 QUALCOMM Confidential Information Product Description QUALCOMM’s 65-VF438-P2 USB stick Adapter design is based on QUALCOMM’s advanced multi- radio WFB4130 Baseband/MAC IC and WFR4031 RF IC, an IEEE 802.11a/b/g/n wireless LAN solution that sends and receives data at up to 300 Mbps. Using QUALCOMM’s advanced chipset with patented True MIMO™ smart antenna technology, QUALCOMM WFB400-based products provide unprecedented levels of 802.11a/b/g/n range and throughput, previously unachievable speed and spectral-efficiency, full Wi-Fi product interoperability for IEEE 802.11b/g/n and IEEE 802.11a/b/g/n global regulatory compliance. C…

Text truncated - open the document above for the full version.

Compliance Certification Services Inc. Report No.: 71108001-SF FCC ID: J9C-65VF438P2 Date of Issue: January 16, 2008 Note: This report shall not be reproduced excep…

Text truncated - open the document above for the full version.