J9C-M2X75Module

Saturday, June 22, 2024 To Whom it May Concern: Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: June 22, 2024 Subject: Certifications concerning “covered” equipment pursuant to Part 2.911(d)(5)(i) and (ii) To whom it may concern, Qualcomm Technologies, Inc. (“the applicant”) certifies that the equipment FCC ID: J9C-M2X75 for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Qualcomm Technologies, Inc. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Name: John Forrester Email: [email protected] Tel: 858-845-7428 Qualcomm Technologies, Inc. 5775 Morehouse Drive, San Diego, CA 92121 www.qualcomm.com

Saturday, June 22, 2024 To Whom it May Concern: Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date: June 22, 2024 Subject: Certifications concerning “covered” equipment pursuant to Part 2.911(d)(5)(i) and (ii) To whom it may concern, Qualcomm Technologies, Inc. (“the applicant”) certifies that the equipment FCC ID: J9C-M2X75 for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Qualcomm Technologies, Inc. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Name: John Forrester Email: [email protected] Tel: 858-845-7428 Qualcomm Technologies, Inc. 5775 Morehouse Drive, San Diego, CA 92121 www.qualcomm.com

Saturday, June 22, 2024 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Certification designating a U.S. agent for service of process pursuant to Part 2.911(d)(7) To whom it may concern, [Qualcomm Technologies, Inc., Grantee Code J9C] (“the applicant”) as required by section 2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC Grantee Code. The service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings. The applicant acknowledges that they will maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges their responsibility to inform the FCC whenever the following agent information changes. Company Name: Qualcomm Technologies, Inc. Company US Address: 5775 Morehouse Drive, San Diego, CA United States 92121 Contact Person: John Forrester Email: [email protected] Telephone number: 858-845-7428 FRN: 0022707111 Sincerely, Name: John Forrester Email: [email protected] Tel: 858-845-7428 Qualcomm Technologies, Inc. 5775 Morehouse Drive, San Diego, CA 92121 www.qualcomm.com

QUALCOMM Incorporated _________ 5775 Morehouse Drive San Diego, CA 92121-1714 www.qualcomm.com April 29, 2011 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Authorization of Handling FCC Regulatory Applications To Whom It May Concern: I, hereby, authorize Mr. John Forrester, to handle FCC Regulatory related applications for QUALCOMM Incorporated and sign all required application documents. Best Regards, Paul Guckian VP, Engineering QUALCOMM Incorporated 5775 Morehouse Drive San Diego, CA 92121 Office: 858-651-1547 [email protected]

Saturday, June 22, 2024 To Whom it May Concern: Date: June 22, 2024 FCC Laboratory 7435 Oakland Mills Rd Columbia MD 21046 Subject: Request for Confidentiality FCC ID: J9C-M2X75 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely.  Tune-up Procedure  Block Diagram  Schematic Diagram  Parts List  Operational Description Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705.  External Photos Qualcomm Technologies, Inc. 5775 Morehouse Drive, San Diego, CA 92121 www. qualcomm.com  Internal Photos  Test Setup Photos  User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Name: John Forrester Email:[email protected] Tel: 858-845-7428

Saturday, June 22, 2024 Module Approval Checklist FCC ID: J9C-M2X75 Item Requirements EUT 1. The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly The module is equipped with its own shielding case. 2. The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal The module has buffer modulation / data inputs. 3. The module must contain power supply regulation on the module The module has its own power supply regulation. 4. The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per §§ 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b) Not applicable to licensed modules. 5. The module must demonstrate compliance in a stand-alone configuration The module was tested on evaluation board, and it’s not inside of another device during testing 6. The module must be labeled with its permanently affixed FCC ID label, or use an electronic display The module transmitter will be labeled with its own FCC ID, and for OEM integration the integration manual contains labeling instructions for the host device per Part 15.212 (vi) 7. The module must comply with all specific rules applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee The module approved transmitter complies with all applicable rules and the integration manual contains any specific requirements addressed to the integrator and/or to the end-user of the final end-product. 8. The module must comply with RF exposure requirements The modular transmitter complies with RF exposure requirement. Sincerely, Name: John Forrester Email: [email protected] Tel: 858-845-7428 Qualcomm Technologies, Inc. 5775 Morehouse Drive, San Diego, CA 92121 www.qualcomm.com

Date: June 22, 2024 To Whom It May Concern, Please be notified that we, Qualcomm Technologies, Inc., has designated Sporton International Inc. as a proxy to sign form 731 and other documentation exclusively related to the type certification of the following product: FCC ID: J9C-M2X75. We further certify that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002 (b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Please send responses to Qualcomm Technologies, Inc. and copy communication to Sporton International Inc. This agreement expires within 6 months of the date of this letter. Sincerely, Name: John Forrester Email:[email protected] Tel: 858-845-7428

Qualcomm Technologies, Inc. © Qualcomm Technologies, Inc. and/or its subsidiaries. All rights reserved. M2X75 Regulatory Label and Placement 80-75323-4 Rev. AC July 24, 2024 80-75323-4 Rev. AC May contain U.S. and international export controlled information 2 Revision history Revision Date Description AA June 2024 Initial release AB July 2024 Update AC July 2024 Update M2X75 Regulatory Label and Placement 80-75323-4 Rev. AC May contain U.S. and international export controlled information 3 1 Model information ■ Brand Name: Qualcomm ■ Model Name M2X75 ■ FCC ID: J9C-M2X75 ■ ISED ID: 2723A-M2X75 2 Label instructions ■ Integrators are responsible to verify the correct regulatory markings ■ The markings shall be laser etched 3 Label and placement LEGAL INFORMATION Your access to and use of this material, along with any documents, software, specifications, reference board files, drawings, diagnostics and other information contained herein (collectively this “Material”), is subject to your (including the corporation or other legal entity you represent, collectively “You” or “Your”) acceptance of the terms and conditions (“Terms of Use”) set forth below. If You do not agree to these Terms of Use, you may not use this Material and shall immediately destroy any copy thereof. 1) Legal Notice. This Material is being made available to You solely for Your internal use with those products and service offerings of Qualcomm Technologies, Inc. (“Qualcomm Technologies”), its affiliates and/or licensors described in this Material, and shall not be used for any other purposes. If this Material is marked as “Qualcomm Internal Use Only”, no license is granted to You herein, and You must immediately (a) destroy or return this Material to Qualcomm Technologies, and (b) report Your receipt of this Material to [email protected]. This Material may not be altered, edited, or modified in any way without Qualcomm Technologies’ prior written approval. Unauthorized use or disclosure of this Material or the information contained herein is strictly prohibited, and You agree to indemnify Qualcomm Technologies, its affiliates and licensors for any damages or losses suffered by Qualcomm Technologies, its affiliates and/or licensors for any such unauthorized uses or disclosures of this Material, in whole or part. Qualcomm Technologies, its affiliates and/or licensors retain all rights and ownership in and to this Material. No license to any trademark, patent, copyright, mask work protection right or any other intellectual property right is either granted or implied by this Material or any information disclosed herein, including, but not limited to, any license to make, use, import or sell any product, service or technology offering embodying any of the information in this Material. THIS MATERIAL IS BEING PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESSED, IMPLIED, STATUTORY OR OTHERWISE. TO THE MAXIMUM EXTENT PERMITTED BY LAW, QUALCOMM TECHNOLOGIES, ITS AFFILIATES AND/OR LICENSORS SPECIFICALLY DISCLAIM ALL WARRANTIES OF TITLE, MERCHANTABILITY, NON-INFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, SATISFACTORY QUALITY, COMPLETENESS OR ACCURACY, AND ALL WARRANTIES ARISING OUT OF TRADE USAGE OR OUT OF A COURSE OF DEALING OR COURSE OF PERFORMANCE. MOREOVER, NEITHER QUALCOMM TECHNOLOGIES, NOR ANY OF ITS AFFILIATES AND/OR LICENSORS, SHALL BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY EXPENSES, LOSSES, USE, OR ACTIONS HOWSOEVER INCURRED OR UNDERTAKEN BY YOU IN RELIANCE ON THIS MATERIAL. Certain product kits, tools and other items referenced in this Material may require You to accept additional terms and conditions before accessing or using those items. Technical data specified in this Material may be subject to U.S. and other applicable export control laws. Transmission contrary to U.S. and any other applicable law is strictly prohibited. Nothing in this Material is an offer to sell any of the components or devices referenced herein. This Material is subject to change without further notification. In the event of a conflict between these Terms of Use and the Website Terms of Use on www.qualcomm.com or the Qualcomm Privacy Policy referenced on www.qualcomm.com, these Terms of Use will control. In the event of a conflict between these Terms of Use and any other agreement (written or click-through, including, without limitation any non-disclosure agreement) executed by You and Qualcomm Technologies or a Qualcomm Technologies affiliate and/or licensor with respect to Your access to and use of this Material, the other agreement will control. These Terms of Use shall be governed by and construed and enforced in accordance with the laws of the State of California, excluding the U.N. Convention on International Sale of Goods, without regard to conflict of laws principles. Any dispute, claim or controversy arising out of or relating to these Terms of Use, or the breach or validity hereof, shall be adjudicated only by a court of competent jurisdiction in the county of San Diego, State of California, and You hereby consent to the personal jurisdiction of such courts for that purpose. 2) Trademark and Product Attribution Statements. Qualcomm is a trademark or registered trademark of Qualcomm Incorporated. Arm is a registered trademark of Arm Limited (or its subsidiaries) in the U.S. and/or elsewhere. The Bluetooth® word mark is a registered trademark owned by Bluetooth SIG, Inc. Other product and brand names referenced in this Material may be trademarks or registered trademarks of their respective owners. Snapdragon and Qualcomm branded products referenced in this Material are products of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm patented technologies are licensed by Qualcomm Incorporated.

TEL : 886-3-327-3456 Page : 1 of 10 FAX : 886-3-328-4978 Issued Date : Jul. 31, 2024 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA3D2703-02 RF EXPOSURE EVALUATION REPORT FCC ID : J9C-M2X75 Equipment : Module Brand Name : Qualcomm Model Name : M2X75 Applicant : Qualcomm Technologies, Inc. 5775 Morehouse Drive, San Diego, California 92121, United States Manufacturer : Qualcomm Technologies, Inc. 5775 Morehouse Drive, San Diego, California 92121, United States Standard : 47 CFR Part 2.1091 We, SPORTON INTERNATIONAL INC has been evaluated this product in accordance with 47 CFR Part2.1091 and it complies with applicable limit. Sporton Lab is accredited to ISO 17025 by Taiwan Accreditation Foundation (TAF code: 1190) and the FCC designation No. TW1190 under the FCC 2.948(e) by Mutual Recognition Agreement (MRA) in FCC evaluation. The results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. Laboratory, the test report shall not be reproduced except in full. SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City, Taiwan (R.O.C.) Approved by: Cona Huang / Deputy Manager TEL : 886-3-327-3456 Page : 2 of 10 FAX : 886-3-328-4978 Issued Date : Jul. 31, 2024 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA3D2703-02 Table of Contents 1. DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ............................................................................. 4 2. MAXIMUM RF AVERAGE OUTPUT POWER AMONG PRODUCTION UNITS ........................................ 5 3. RF EXPOSURE LIMIT INTRODUCTION .................................................................................................... 6 4. RADIO FREQUENCY RADIATION EXPOSURE EVALUATION ............................................................... 7 4.1. Standalone Power Density Calculation ............................................................................................. 7 4.2. Collocated Power Density Calculation ............................................................................................... 8 TEL : 886-3-327-3456 Page : 3 of 10 FAX : 886-3-328-4978 Issued Date : Jul. 31, 2024 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA3D2703-02 History of this test report Report No. Version Description Issued Date FA3D2703-02 Rev. 01 Initial issue of report Jul. 31, 2024 TEL : 886-3-327-3456 Page : 4 of 10 FAX : 886-3-328-4978 Issued Date : Jul. 31, 2024 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA3D2703-02 1. Description of Equipment Under Test (EUT) Product Feature & Specification EUT Type Module Brand Name Qualcomm Model Name M2X75 FCC ID J9C-M2X75 Wireless Technology and Frequency Range WCDMA Band II: 1850 MHz ~ 1910 MHz WCDMA Band IV: 1710 MHz ~ 1755 MHz WCDMA Band V: 824 MHz ~ 849 MHz LTE Band 2: 1850 MHz ~ 1910 MHz LTE Band 4: 1710 MHz ~ 1755 MHz LTE Band 5: 824 MHz ~ 849 MHz LTE Band 7: 2500 MHz ~ 2570 MHz LTE Band 12: 699 MHz ~ 716 MHz LTE Band 13: 777 MHz ~ 787 MHz LTE Band 14: 788 MHz ~ 798 MHz LTE Band 17: 704 MHz ~ 716 MHz LTE Band 25: 1850 MHz ~ 1915 MHz LTE Band 26: 814 MHz ~ 849 MHz LTE Band 30: 2305 MHz ~ 2315 MHz LTE Band 38: 2570 MHz ~ 2620 MHz LTE Band 41: 2496 MHz ~ 2690 MHz LTE Band 42: 3450 MHz ~ 3550 MHz LTE Band 43: 3700 MHz ~ 3980 MHz LTE Band 48: 3550 MHz ~ 3700 MHz LTE Band 66: 1710 MHz ~ 1780 MHz LTE Band 70: 1695 MHz ~ 1710 MHz LTE Band 71: 663 MHz ~ 698 MHz 5G NR n2 : 1850 MHz ~ 1910 MHz 5G NR n5 : 824 MHz ~ 849 MHz 5G NR n7 : 2500 MHz ~ 2570 MHz 5G NR n12 : 699 MHz ~ 716 MHz 5G NR n13: 777 MHz ~ 787 MHz 5G NR n14 : 788 MHz ~ 798 MHz 5G NR n25 : 1850 MHz ~ 1915 MHz 5G NR n26 : 814 MHz ~ 849 MHz 5G NR n30 : 2305 MHz ~ 2315 MHz 5G NR n38 : 2570 MHz ~ 2620 MHz 5G NR n41 : 2496 MHz ~ 2690 MHz 5G NR n48 : 3550 MHz ~ 3700 MHz 5G NR n66 : 1710 MHz ~ 1780 MHz 5G NR n70 : 1695 MHz ~ 1710 MHz 5G NR n71 : 663 MHz ~ 698 MHz 5G NR n77: 3700 MHz ~ 3980 MHz, 3450MHz ~ 3550MHz 5G NR n78: 3700 MHz ~ 3800 MHz, 3450MHz ~ 3550MHz Mode RMC 12.2Kbps HSDPA HSUPA DC-HSDPA LTE: QPSK, 16QAM, 64QAM, 256QAM 5G NR: DFT-s-OFDM/CP-OFDM, Pi/2 BPSK/QPSK/16QAM/64QAM/256QAM EUT Stage Identical Prototype Reviewed by: Jason Wang Report Producer: Paula Chen TEL : 886-3-327-3456 Page : 5 of 10 FAX : 886-3-328-4978 Issued Date : Jul. 31, 2024 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA3D2703-02 2. Maximum RF average output power among production units Mode Band Number Maximum Average Power (dBm) WCDMA B2 24.5 WCDMA B4 24.5 WCDMA B5 24.5 LTE B2 24.8 LTE B4 24.5 LTE B5 24.8 LTE B7 24.8 LTE B12 24.5 LTE B13 24.5 LTE B14 24.5 LTE B17 24.5 LTE B25 24.5 LTE B26 24.5 LTE B30 23.0 LTE B38 24.5 LTE B41_PC3 25.0 LTE B41_PC2 27.0 LTE B42 25.0 LTE B43 24.5 LTE B48 22.8 LTE B66 24.8 LTE B70 24.5 LTE B71 24.5 FR1 n2 24.5 FR1 n5 24.5 FR1 n7 24.7 FR1 n12 24.5 FR1 n13 24.5 FR1 n14 24.5 FR1 n25 24.5 FR1 n26 24.5 FR1 n30 23.0 FR1 n38 25.0 FR1 n41_PC3 25.0 FR1 n41_PC2 27.0 FR1 n41_PC1.5 30.0 FR1 n48 22.8 FR1 n66 24.7 FR1 n70 24.5 FR1 n71 24.5 FR1 n77_PC3 25.1 FR1 n77_PC2 27.1 FR1 n77_PC1.5 30.1 FR1 n78_PC3 25.1 FR1 n78_PC2 27.1 FR1 n78_PC1.5 30.1 TEL : 886-3-327-3456 Page : 6 of 10 FAX : 886-3-328-4978 Issued Date : Jul. 31, 2024 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA3D2703-02 3. RF Exposure Limit Introduction According to ANSI/IEEE C95.1-1992, the criteria listed in Table 1 shall be used to evaluate the environmental impact of human exposure to radio frequency (RF) radiation as specified in §1.1310. The MPE was calculated at 20 cm to show compliance with the power density limit. The following formula was used to calculate the Power Density: 퐒= 퐏퐆 ퟒ훑퐑 ퟐ Where: S = Power Density P = Output Power at Antenna Terminals G = Gain of Transmit Antenna (linear gain) R = Distance from Transmitting Antenna TEL : 886-3-327-3456 Page : 7 of 10 FAX : 886-3-328-4978 Issued Date : Jul. 31, 2024 Form version: 200414 RF…

Text truncated - open the document above for the full version.

TEL : 886-3-327-3456 Page Number : 1 of 25 FAX : 886-3-328-4978 Issue Date : Aug. 07, 2024 Report Template No.: BU5-FGLTE96 Version 2.5 Report Version : 01 FCC RADIO TEST REPORT Report No. : FG3D2703-02D FCC RADIO TEST REPORT FCC ID : J9C-M2X75 Equipment : Module Brand Name : Qualcomm Model Name : M2X75 Applicant : Qualcomm Technologies, Inc. 5775 Morehouse Drive, San Diego, California 92121, United States Manufacturer : Qualcomm Technologies, Inc. 5775 Morehouse Drive, San Diego, California 92121, United States Standard : FCC 47 CFR Part 2, 96 The product was received on Apr. 09, 2024 and testing was performed from Apr. 10, 2024 to Jul. 27, 2024. We, Sporton International Inc. EMC & Wireless Communications Laboratory, would like to declare that the tested sample has been evaluated in accordance with the test procedures given in ANSI / TIA-603-E and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval from Sporton International Inc. EMC & Wireless Communications Laboratory, the test report shall not be reproduced except in full. Approved by: Louis Wu Sporton International Inc. EMC & Wireless Communications Laboratory No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333, Taiwan (R.O.C.) TEL : 886-3-327-3456 Page Number : 2 of 25 FAX : 886-3-328-4978 Issue Date : Aug. 07, 2024 Report Template No.: BU5-FGLTE96 Version 2.5 Report Version : 01 FCC RADIO TEST REPORT Report No. : FG3D2703-02D Table of Contents History of this test report ................................................................................................................................. 3 Summary of Test Result................................................................................................................................... 4 1 General Description ................................................................................................................................... 5 1.1 Product Feature of Equipment Under Test ........................................................................................ 5 1.2 Modification of EUT ........................................................................................................................... 5 1.3 Testing Site ........................................................................................................................................ 6 1.4 Applied Standards ............................................................................................................................. 7 2 Test Configuration of Equipment Under Test ......................................................................................... 8 2.1 Test Mode .......................................................................................................................................... 8 2.2 Connection Diagram of Test System ................................................................................................. 9 2.3 Support Unit used in test configuration and system .......................................................................... 9 2.4 Measurement Results Explanation Example ..................................................................................... 9 2.5 Frequency List of Low/Middle/High Channels ................................................................................. 10 3 Conducted Test Items .............................................................................................................................. 12 3.1 Measuring Instruments .................................................................................................................... 12 3.2 Conducted Output Power Measurement ......................................................................................... 13 3.3 Peak-to-Average Ratio .................................................................................................................... 14 3.4 EIRP ................................................................................................................................................ 15 3.5 Occupied Bandwidth ........................................................................................................................ 16 3.6 Conducted Band Edge .................................................................................................................... 17 3.7 Conducted Spurious Emission ........................................................................................................ 18 3.8 Frequency Stability .......................................................................................................................... 19 4 Radiated Test Items ................................................................................................................................. 20 4.1 Measuring Instruments .................................................................................................................... 20 4.2 Test Setup ....................................................................................................................................... 20 4.3 Test Result of Radiated Test ........................................................................................................... 21 4.4 Radiated Spurious Emission ........................................................................................................... 22 5 List of Measuring Equipment .................................................................................................................. 23 6 Measurement Uncertainty ....................................................................................................................... 25 Appendix A. Test Results of Conducted Test Appendix B. Test Results of Radiated Test Appendix C. Test Setup Photographs TEL : 886-3-327-3456 Page Number : 3 of 25 FAX : 886-3-328-4978 Issue Date : Aug. 07, 2024 Re…

Text truncated - open the document above for the full version.

TEL : 886-3-327-3456 Page Number : A2-40 of 63 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG3D2703-02D LTE Band 48 / 20MHz QPSK Lowest Channel / FullRB Middle Channel / FullRB Highest Channel / FullRB N/A TEL : 886-3-327-3456 Page Number : A2-41 of 63 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG3D2703-02D LTE Band 48 / 5MHz 16QAM Lowest Channel / 1RB0 Lowest Channel / 1RBmax Lowest Channel / FullRB N/A TEL : 886-3-327-3456 Page Number : A2-42 of 63 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG3D2703-02D LTE Band 48 / 5MHz 16QAM Middle Channel / 1RB0 Middle Channel / 1RBmax Middle Channel / FullRB N/A TEL : 886-3-327-3456 Page Number : A2-43 of 63 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG3D2703-02D LTE Band 48 / 5MHz 16QAM Highest Channel / 1RB0 Highest Channel / 1RBmax Highest Channel / FullRB N/A TEL : 886-3-327-3456 Page Number : A2-44 of 63 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG3D2703-02D LTE Band 48 / 10MHz 16QAM Lowest Channel / FullRB Middle Channel / FullRB Highest Channel / FullRB N/A TEL : 886-3-327-3456 Page Number : A2-45 of 63 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG3D2703-02D LTE Band 48 / 15MHz 16QAM Lowest Channel / FullRB Middle Channel / FullRB Highest Channel / FullRB N/A TEL : 886-3-327-3456 Page Number : A2-46 of 63 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG3D2703-02D LTE Band 48 / 20MHz 16QAM Lowest Channel / FullRB Middle Channel / FullRB Highest Channel / FullRB N/A TEL : 886-3-327-3456 Page Number : A2-47 of 63 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG3D2703-02D LTE Band 48 / 5MHz 64QAM Lowest Channel / 1RB0 Lowest Channel / 1RBmax Lowest Channel / FullRB N/A TEL : 886-3-327-3456 Page Number : A2-48 of 63 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG3D2703-02D LTE Band 48 / 5MHz 64QAM Middle Channel / 1RB0 Middle Channel / 1RBmax Middle Channel / FullRB N/A TEL : 886-3-327-3456 Page Number : A2-49 of 63 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG3D2703-02D LTE Band 48 / 5MHz 64QAM Highest Channel / 1RB0 Highest Channel / 1RBmax Highest Channel / FullRB N/A TEL : 886-3-327-3456 Page Number : A2-50 of 63 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG3D2703-02D LTE Band 48 / 10MHz 64QAM Lowest Channel / FullRB Middle Channel / FullRB Highest Channel / FullRB N/A TEL : 886-3-327-3456 Page Number : A2-51 of 63 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG3D2703-02D LTE Band 48 / 15MHz 64QAM Lowest Channel / FullRB Middle Channel / FullRB Highest Channel / FullRB N/A TEL : 886-3-327-3456 Page Number : A2-52 of 63 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG3D2703-02D LTE Band 48 / 20MHz 64QAM Lowest Channel / FullRB Middle Channel / FullRB Highest Channel / FullRB N/A TEL : 886-3-327-3456 Page Number : A2-53 of 63 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG3D2703-02D LTE Band 48 / 5MHz 256QAM Lowest Channel / 1RB0 Lowest Channel / 1RBmax Lowest Channel / FullRB N/A TEL : 886-3-327-3456 Page Number : A2-54 of 63 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG3D2703-02D LTE Band 48 / 5MHz 256QAM Middle Channel / 1RB0 Middle Channel / 1RBmax Middle Channel / FullRB N/A TEL : 886-3-327-3456 Page Number : A2-55 of 63 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG3D2703-02D LTE Band 48 / 5MHz 256QAM Highest Channel / 1RB0 Highest Channel / 1RBmax Highest Channel / FullRB N/A TEL : …

Text truncated - open the document above for the full version.