J9CQCARD7280N2QCARD7280

All Qualcomm products mentioned herein are products of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark or registered trademark of Qualcomm Incorporated. Other product and brand names may be trademarks or registered trademarks of their respective owners. This technical data may be subject to U.S. and international export, re-export, or transfer (“export”) laws. Diversion contrary to U.S. and international law is strictly prohibited. Qualcomm Technologies, Inc. 5775 Morehouse Drive San Diego, CA 92121 U.S.A. © 2022 Qualcomm Technologies, Inc. and/or its subsidiaries. All rights reserved. QCARD7280 Module Integrator Instruction 80-43641-6 Rev. AC August 22, 2022 80-43641-6 Rev. AC MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 2 Revision history Revision Date Description AA August 2022 Initial release AB August 2022 Updated table 7-2 AC August 2022 Updated section 10.2 EU table, table 7-2 80-43641-6 Rev. AC MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 3 Contents 1 Introduction ............................................................................................................................................... 6 2 Product Overview ...................................................................................................................................... 7 3 Available Global Modular Approvals from Qualcomm .............................................................................. 8 4 Integrated Product Test and Certification Requirements .......................................................................... 9 5 Additional Regulatory Conformance Testing and/or Submissions Required by the Integrator .............. 11 6 Compliant/Allowable Tx Power File ......................................................................................................... 12 7 Allowable Antennas to Use with the Radio Module ................................................................................ 13 7.1 Antenna filing process in Japan, Korea and Taiwan ................................................................... 16 7.1.1 Notification of all antenna models to be used with the Module .................................. 16 8 Antenna Placement Inside the Host System and RF Exposure ................................................................ 17 9 Simultaneous Transmission with Other Integrated or Plug-In Radios ..................................................... 18 10 Module May Not Be Installed by End Users .......................................................................................... 19 11 Required Labeling on the Outside of the Host ....................................................................................... 20 11.1 FCC and ISED ............................................................................................................................. 20 11.2 European Community Radio Equipment Directive (RED) ......................................................... 20 11.3 Taiwan NCC ............................................................................................................................... 21 11.3.1 For host system use QCARD7280P (WIFI SKU). The NCC requires a label on the outside of the host system visible to the end user. .............................. 21 11.3.2 For host system use QCARD7280 (WWAN+WIFI SKU). The NCC requires host system to obtain a unique NCC certificate and approval number. QCARD7280 NCC certificate maybe leveraged during host system NCC certification process. ......................................................... 21 11.4 Other countries ......................................................................................................................... 22 12 Required Labeling on the Module ......................................................................................................... 23 12.1 FCC and ISED labeling on the Module ...................................................................................... 23 12.2 Rest of the world labeling on the Module ................................................................................ 23 13 Required Regulatory Wording for User Manual/Installation Manual ................................................... 24 QCARD7280 Module Integrator Instruction Contents 80-43641-6 Rev. AC MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 4 13.1 FCC compliance information .................................................................................................... 24 13.2 Industry Canada Notices ........................................................................................................... 25 13.3 European Community (RED) user manual wording and declaration ....................................... 26 13.4 European Community (RED) Declaration of Conformity for System ........................................ 27 13.5 Brazil user manual wording ...................................................................................................... 27 13.6 Taiwan user manual wording ................................................................................................... 28 13.7 Japan user manual wording ...................................................................................................... 28 13.8 India user manual wording ....................................................................................................... 29 80-43641-6 Rev. AC MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 5 Tables Table 2-1 QCARD7280 Variant model numbers............................................................................................ 7 Table 4-1 47CFR Rules Parts Addressed in Modular Certification .............................................................. 10 Table 7-1 Allowed maximum gain (dBi), including antenna cable loss ....................................................... 13 Table 7-2 Allowed maximum …

Text truncated - open the document above for the full version.

QUALCOMM Incorporated _________ 5775 Morehouse Drive San Diego, CA 92121-1714 www.qualcomm.com April 29, 2011 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Authorization of Handling FCC Regulatory Applications To Whom It May Concern: I, hereby, authorize Mr. John Forrester, to handle FCC Regulatory related applications for QUALCOMM Incorporated and sign all required application documents. Best Regards, Paul Guckian VP, Engineering QUALCOMM Incorporated 5775 Morehouse Drive San Diego, CA 92121 Office: 858-651-1547 [email protected]

Date: August 15, 2022 FCC ID: J9CQCARD7280N FCC ID: J9CQCARD7280N2 FCC ID: J9CQCARD7280P Qualcomm Technologies, Inc. 5775 Morehouse Drive, San Diego, CA 92121 To the attention of: Federal Communications Commission Authorization and Evaluation Division Declaration Letter for Client Devices We, Qualcomm Technologies, Inc., attest that this device under FCC ID: J9CQCARD7280N, FCC ID: J9CQCARD7280N2 and FCC ID: J9CQCARD7280P comply with device protocol requirements and operational restrictions for Client Devices. a) These devices will only associate and connect with an indoor access point or subordinate device and never directly connects to other client devices. b) Client devices must be under control of an U-NII-4, Indoor access point or subordinate device. c) Clients shall passively scan to associate with access point or subordinate. d) Clients are permitted to initiate a brief probe message requesting to join and associated with a specific Access Point or Subordinate. e) Clients cannot have a direct connection to the internet to source the internet to other clients, access points, subordinates or clients from a wired or direct connection. f) We acknowledge these devices are subject to and in full compliance with the device restrictions listed below. All users are notified of these restrictions through the user manual. • A statement in a conspicuous location on the device and the user's manual: “Section 15.19 Statement (if not on the device) If you should have any questions regarding this declaration, please do not hesitate to contact us, thank you! Sincerely, John Forrester Sr. Director Engineering Qualcomm Technologies, Inc.

Monday, August 08, 2022 Request for Modular Approval for FCC ID: J9CQCARD7280N2, J9CQCARD7280N, J9CQCARD7280P Item Requirements EUT 1. The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly The module is equipped with its own shielding case. 2. The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal The module has buffer modulation / data inputs. 3. The module must contain power supply regulation on the module The module has its own power supply regulation. 4. The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per §§ 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b) Not applicable to licensed modules. 5. The module must demonstrate compliance in a stand-alone configuration The module was tested on evaluation board, and it’s not inside of another device during testing 6. The module must be labeled with its permanently affixed FCC ID label, or use an electronic display The module transmitter will be labeled with its own FCC ID, and for OEM integration the integration manual contains labeling instructions for the host device per Part 15.212 (vi) 7. The module must comply with all specific rules applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee The module approved transmitter complies with all applicable rules and the integration manual contains any specific requirements addressed to the integrator and/or to the end-user of the final end-product. 8. The module must comply with RF exposure requirements The modular transmitter complies with RF exposure requirement. Sincerely, John Forrester Sr. Director Engineering, EMC-Regulatory Qualcomm Technologies, Inc. [email protected] Qualcomm Technologies, Inc. 5775 Morehouse Drive, San Diego, CA 92121

Monday, August 08, 2022 To Whom it May Concern: Please be notified that I, John Forrester, an authorized representative of Qualcomm Technologies, Inc., have designated Sporton International Inc. to be a proxy to sign form 731 and other documentation exclusively related to the Type Certification of FCC ID: J9CQCARD7280N, FCC ID: J9CQCARD7280N2, FCC ID: J9CQCARD7280P. We further certify that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002 (b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 862. Sincerely, John Forrester Sr. Director Engineering, EMC-Regulatory Qualcomm Technologies, Inc. [email protected] Qualcomm Technologies, Inc. 5775 Morehouse Drive, San Diego, CA 92121 www.qualcomm.com

Monday, August 08, 2022 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for Confidentiality FCC ID: J9CQCARD7280N FCC ID: J9CQCARD7280N2 FCC ID: J9CQCARD7280P To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. • Schematic Diagram • Block Diagram • Part List • Operational Description • Tune-up Procedure • U-NII SW security Statement Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. • External Photos • Internal Photos • Test Setup Photos • Integrator Instruction It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, John Forrester Sr. Director Engineering, EMC-Regulatory Qualcomm Technologies, Inc. [email protected] Qualcomm Technologies, Inc. 5775 Morehouse Drive, San Diego, CA 92121

For additional information or to submit technical questions, go to: https://createpoint.qti.qualcomm.com Confidential – Qualcomm Technologies, Inc. and/or its affiliated companies – May Contain Trade Secrets NO PUBLIC DISCLOSURE PERMITTED: Please report postings of this document on public servers or websites to: [email protected]. Confidential Distribution: Use or distribution of this item, in whole or in part, is prohibited except as expressly permitted by written agreement(s) and/or terms with Qualcomm Incorporated and/or its subsidiaries. Not to be used, copied, reproduced, or modified in whole or in part, nor its contents revealed in any manner to others without the express written permission of Qualcomm Technologies, Inc. All Qualcomm products mentioned herein are products of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark or registered trademark of Qualcomm Incorporated. Other product and brand names may be trademarks or registered trademarks of their respective owners. This technical data may be subject to U.S. and international export, re-export, or transfer (“export”) laws. Diversion contrary to U.S. and international law is strictly prohibited. Qualcomm Technologies, Inc. 5775 Morehouse Drive San Diego, CA 92121 U.S.A. © 2022 Qualcomm Technologies, Inc. and/or its subsidiaries. All rights reserved. QCARD7280N2 Module Photographs 80-43641-110 Rev. AA August 1, 2022 80-43641-110 Rev. AA Confidential – Qualcomm Technologies, Inc. and/or its affiliated companies – May Contain Trade Secrets 2 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Revision history Revision Date Description AA August 2022 Initial release QCARD7280N2 Module Photographs 80-43641-110 Rev. AA Confidential – Qualcomm Technologies, Inc. and/or its affiliated companies – May Contain Trade Secrets 3 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 1 Front Photographs 1.1 External QCARD7280N2 Module Photographs 80-43641-110 Rev. AA Confidential – Qualcomm Technologies, Inc. and/or its affiliated companies – May Contain Trade Secrets 5 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 2 Rear Photograph

All Qualcomm products mentioned herein are products of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. Other product and brand names may be trademarks or registered trademarks of their respective owners. This technical data may be subject to U.S. and international export, re-export, or transfer (“export”) laws. Diversion contrary to U.S. and international law is strictly prohibited. Qualcomm Technologies, Inc. 5775 Morehouse Drive San Diego, CA 92121 U.S.A. © 2022 Qualcomm Technologies, Inc. and/or its subsidiaries. All rights reserved. QCARD7280N2 - Label and Placement Document 80-43641-5 Rev. AA August 10, 2022 80-43641-5 Rev. AA MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 2 Revision history Revision Date Description AA August 2022 Initial release QSIP7180 - Label Document 80-43641-5 Rev. AA MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 3 Contents 1 FCC ID ......................................................................................................................................................... 4 1.1 Label ............................................................................................................................................. 4 2 Label Placement ......................................................................................................................................... 5 QSIP7180 - Label Document 80-43641-5 Rev. AA MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 4 1 FCC ID □ Regulatory Model: QCARD7280N2 □ FCC ID: J9CQCARD7280N2 1.1 Label QSIP7180 - Label Document Product Overview 80-43641-5 Rev. AA MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 5 2 Label Placement

QCARD7280N2 Module Photographs 80-43641-110 Rev. AB Confidential – Qualcomm Technologies, Inc. and/or its affiliated companies – May Contain Trade Secrets 4 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 1.2 Internal For FCC Use Only

TEL : 886-3-327-3456 Page : 1 of 9 FAX : 886-3-328-4978 Issued Date : Aug. 18, 2022 Form version: 220617 RF EXPOSURE EVALUATION REPORT Report No. : FA1N1011 RF EXPOSURE EVALUATION REPORT FCC ID : J9CQCARD7280N2 Equipment : QCARD7280 Brand Name : Qualcomm Model Name : QCARD7280N2 Applicant : Qualcomm Technologies, Inc. 5775 Morehouse Drive, San Diego, California 92121, United State Manufacturer : Qualcomm Semiconductor Limited No. 16-1 Zhanye 2nd Rd. East District Hsinchu City, 300091 (Taiwan) Standard : 47 CFR Part 2.1091 We, SPORTON INTERNATIONAL INC has been evaluated this product in accordance with 47 CFR Part2.1091 and it complies with applicable limit. Sporton Lab is accredited to ISO 17025 by Taiwan Accreditation Foundation (TAF code: 1190) and the FCC designation No. TW1190 under the FCC 2.948(e) by Mutual Recognition Agreement (MRA) in FCC evaluation. The results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. Laboratory, the test report shall not be reproduced except in full SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City, Taiwan (R.O.C.) Approved by: Cona Huang / Deputy Manager TEL : 886-3-327-3456 Page : 2 of 9 FAX : 886-3-328-4978 Issued Date : Aug. 18, 2022 Form version: 220617 RF EXPOSURE EVALUATION REPORT Report No. : FA1N1011 Table of Contents 1. DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ............................................................................. 4 2. MAXIMUM RF AVERAGE OUTPUT POWER AMONG PRODUCTION UNITS ........................................ 5 3. RF EXPOSURE LIMIT INTRODUCTION .................................................................................................... 6 4. RF EXPOSURE EVALUATION ................................................................................................................... 7 4.1. Collocated assessment ..................................................................................................................... 8 TEL : 886-3-327-3456 Page : 3 of 9 FAX : 886-3-328-4978 Issued Date : Aug. 18, 2022 Form version: 220617 RF EXPOSURE EVALUATION REPORT Report No. : FA1N1011 History of this test report Report No. Version Description Issued Date FA1N1011 Rev. 01 Initial issue of report Aug. 18, 2022 TEL : 886-3-327-3456 Page : 4 of 9 FAX : 886-3-328-4978 Issued Date : Aug. 18, 2022 Form version: 220617 RF EXPOSURE EVALUATION REPORT Report No. : FA1N1011 1. Description of Equipment Under Test (EUT) Product Feature & Specification EUT Type QCARD7280 Brand Name Qualcomm Model Name QCARD7280N2 FCC ID J9CQCARD7280N2 Wireless Technology and Frequency Range WCDMA Band II: 1850 MHz ~ 1910 MHz WCDMA Band IV: 1710 MHz ~ 1755 MHz WCDMA Band V: 824 MHz ~ 849 MHz LTE Band 2: 1850 MHz ~ 1910 MHz LTE Band 4: 1710 MHz ~ 1755 MHz LTE Band 5: 824 MHz ~ 849 MHz LTE Band 12: 699 MHz ~ 716 MHz LTE Band 13: 777 MHz ~ 787 MHz LTE Band 14: 788 MHz ~ 798 MHz LTE Band 25: 1850 MHz ~ 1915 MHz LTE Band 26: 814 MHz ~ 849 MHz LTE Band 30: 2305 MHz ~ 2315 MHz LTE Band 38: 2570 MHz ~ 2620 MHz LTE Band 41: 2496 MHz ~ 2690 MHz LTE Band 48: 3550 MHz ~ 3700 MHz LTE Band 66: 1710 MHz ~ 1780 MHz LTE Band 71: 663 MHz ~ 698 MHz 5G NR n2 : 1850 MHz ~ 1910 MHz 5G NR n5 : 824 MHz ~ 849 MHz 5G NR n25 : 1850 MHz ~ 1915 MHz 5G NR n38 : 2570 MHz ~ 2620 MHz 5G NR n41 : 2496 MHz ~ 2690 MHz 5G NR n48 : 3550 MHz ~ 3700 MHz 5G NR n66 : 1710 MHz ~ 1780 MHz 5G NR n70 : 1695 MHz ~ 1710 MHz 5G NR n71 : 663 MHz ~ 698 MHz 5G NR n77: 3700 MHz ~ 3980 MHz, 3450MHz ~ 3550MHz WLAN 2.4 GHz Band: 2400 MHz ~ 2483.5 MHz WLAN 5.2 GHz Band: 5150 MHz ~ 5250 MHz WLAN 5.3 GHz Band: 5250 MHz ~ 5350 MHz WLAN 5.6 GHz Band: 5470 MHz ~ 5725 MHz WLAN 5.8 GHz Band: 5725 MHz ~ 5850 MHz WLAN 6E: 5925 MHz ~ 6425 MHz, 6425 MHz ~ 6525 MHz, 6525 MHz ~ 6875 MHz, 6875 MHz ~ 7125 MHz Bluetooth: 2400 MHz ~ 2483.5 MHz Mode RMC 12.2Kbps HSDPA HSUPA LTE: QPSK, 16QAM, 64QAM, 256QAM 5G NR: DFT-s-OFDM/CP-OFDM, Pi/2 BPSK/QPSK/16QAM/64QAM/256QAM WLAN:802.11a/b/g/n/ac/ax HT20/HT40/VHT20/VHT40/VHT80/VHT160/HE20/HE40/HE80/HE160 Bluetooth BR/EDR/LE EUT Stage Identical Prototype Reviewed by: Jason Wang Report Producer: Daisy Peng TEL : 886-3-327-3456 Page : 5 of 9 FAX : 886-3-328-4978 Issued Date : Aug. 18, 2022 Form version: 220617 RF EXPOSURE EVALUATION REPORT Report No. : FA1N1011 2. Maximum RF average output power among production units Remark: In RF test, EUT TX power level was configured via the test mode and set slightly higher than the maximum power level to cover the range of TX power variation among units Mode Band Number Maximum Average Power (dBm) WCDMA B2 25.20 WCDMA B4 25.20 WCDMA B5 25.20 LTE B2 25.20 LTE B4 25.20 LTE B5 25.20 LTE B12 25.20 LTE B13 25.20 LTE B14 25.20 LTE B25 25.20 LTE B26 25.20 LTE B30 25.20 LTE B38 25.20 LTE B38(HPUE) 27.20 LTE B41 25.20 LTE B41(HPUE) 27.20 LTE B48 25.20 LTE B66 25.20 LTE B71 25.20 FR1 n2 25.20 FR1 n5 25.20 FR1 n25 25.20 FR1 n38 25.20 FR1 n41 25.20 FR1 n41(HPUE) 27.20 FR1 n48 25.20 FR1 n66 25.20 FR1 n70 25.20 FR1 n71 25.20 FR1 n77 25.20 FR1 n77(HPUE) 27.20 Mode Maximum Average Power (dBm) BT BLE 11.05 BT BR/EDR 20.16 2.4GHz WLAN 22.86 5GHz WLAN 20.46 6GHz WLAN 15.81 TEL : 886-3-327-3456 Page : 6 of 9 FAX : 886-3-328-4978 Issued Date : Aug. 18, 2022 Form version: 220617 RF EXPOSURE EVALUATION REPORT Report No. : FA1N1011 3. RF Exposure Limit Introduction Per 1.1307(b)(3), (i) For single RF sources (i.e., any single fixed RF source, mobile device, or portable device, as defined in paragraph (b)(2) of this section): A single RF source is exempt if: (A) The available maximum time-averaged power is no more than 1 mW, regardless of separation distance. This exemption may not be used in conjunction with other exemption criteria other than those in paragraph (b)(3)(ii)(A) of this section. Medical implant devices may only use this exemption and that in paragraph (b)(3)(ii)(A); (B) Or the available maximum time-averaged power or e…

Text truncated - open the document above for the full version.

TEL: 886-3-327-0868 Page Number : E16 of E21 FAX: 886-3-327-0855 FCC RADIO TEST REPORT Report No. : FR1N1011G UNII-4 - 5735~5895MHz WIFI 802.11ax HE20 (Harmonic @ 3m) WIFI UNII-4 5735~5895MHz Harmonic @ 3m ANT 802.11ax HE20 CH173 5865MHz 5+4 Horizontal Vertical Peak Avg. TEL: 886-3-327-0868 Page Number : E17 of E21 FAX: 886-3-327-0855 FCC RADIO TEST REPORT Report No. : FR1N1011G UNII-4 - 5735~5895MHz WIFI 802.11ax HE40 (Harmonic @ 3m) WIFI UNII-4 5735~5895MHz Harmonic @ 3m ANT 802.11ax HE40 CH167 5835MHz 5+4 Horizontal Vertical Peak Avg. TEL: 886-3-327-0868 Page Number : E18 of E21 FAX: 886-3-327-0855 FCC RADIO TEST REPORT Report No. : FR1N1011G UNII-4 - 5735~5895MHz WIFI 802.11ax HE80 (Harmonic @ 3m) WIFI UNII-4 5735~5895MHz Harmonic @ 3m ANT 802.11ax HE80 CH171 5855MHz 5+4 Horizontal Vertical Peak Avg. TEL: 886-3-327-0868 Page Number : E19 of E21 FAX: 886-3-327-0855 FCC RADIO TEST REPORT Report No. : FR1N1011G UNII-4 - 5735~5895MHz WIFI 802.11ax HE160 Full (Harmonic @ 3m) WIFI UNII-4 5735~5895MHz Harmonic @ 3m ANT 802.11ax HE160 Full CH163 5815MHz 5+4 Horizontal Vertical Peak Avg. TEL: 886-3-327-0868 Page Number : E20 of E21 FAX: 886-3-327-0855 FCC RADIO TEST REPORT Report No. : FR1N1011G Emission above 18GHz 5GHz WIFI 802.11a (SHF) WIFI 5GHz WIFI ANT 802.11a SHF 5+4 Horizontal Vertical Peak Avg. TEL: 886-3-327-0868 Page Number : E21 of E21 FAX: 886-3-327-0855 FCC RADIO TEST REPORT Report No. : FR1N1011G Emission below 1GHz 5GHz WIFI 802.11a (LF) WIFI 5GHz WIFI ANT 802.11a LF 5+4 Horizontal Vertical QP / Peak TEL: 886-3-327-0868 Page Number : F1 of F4 FAX: 886-3-327-0855 FCC RADIO TEST REPORT Report No. : FR1N1011G Appendix F. Duty Cycle Plots Antenna Band Duty Cycle(%) T(us) 1/T(kHz) VBW Setting 5+4 5GHz 802.11a for Ant. 5 100.00 - - 10Hz 5+4 5GHz 802.11a for Ant. 4 100.00 - - 10Hz 5+4 5GHz 802.11ax HE20 Full RU for Ant. 5 100.00 - - 10Hz 5+4 5GHz 802.11ax HE20 Full RU for Ant. 4 100.00 - - 10Hz 5+4 5GHz 802.11ax HE40 Full RU for Ant. 5 100.00 - - 10Hz 5+4 5GHz 802.11ax HE40 Full RU for Ant. 4 100.00 - - 10Hz 5+4 5GHz 802.11ax HE80 Full RU for Ant. 5 100.00 - - 10Hz 5+4 5GHz 802.11ax HE80 Full RU for Ant. 4 100.00 - - 10Hz 5+4 5GHz 802.11ax HE160 Full RU for Ant. 5 100.00 - - 10Hz 5+4 5GHz 802.11ax HE160 Full RU for Ant. 4 100.00 - - 10Hz MIMO <Ant. 5> 802.11a TEL: 886-3-327-0868 Page Number : F2 of F4 FAX: 886-3-327-0855 FCC RADIO TEST REPORT Report No. : FR1N1011G 802.11ax HE20 Full RU 802.11ax HE40 Full RU 802.11ax HE80 Full RU 802.11ax HE160 Full RU TEL: 886-3-327-0868 Page Number : F3 of F4 FAX: 886-3-327-0855 FCC RADIO TEST REPORT Report No. : FR1N1011G MIMO <Ant. 4> 802.11a 802.11ax HE20 Full RU 802.11ax HE40 Full RU TEL: 886-3-327-0868 Page Number : F4 of F4 FAX: 886-3-327-0855 FCC RADIO TEST REPORT Report No. : FR1N1011G 802.11ax HE80 Full RU 802.11ax HE160 Full RU

TEL : 886-3-327-0868 Page Number : D29 of D35 FAX : 886-3-327-0855 FCC RADIO TEST REPORT Report No. : FR1N1011D UNII 2C - Straddle Channel WIFI 802.11ax HE20 Full (Harmonic @ 3m) WIFI Note Frequency Level Margin Limit Read Antenna Path Preamp Ant Table Peak Pol. Ant. Line Level Factor Loss Factor Pos Pos Avg. 5+4 ( MHz ) ( dBμV/m ) ( dB ) ( dBμV/m ) (dBμV) ( dB/m ) ( dB ) ( dB ) ( cm ) ( deg ) (P/A) (H/V) 802.11ax HE20 Full CH 144 5720MHz 11440 45.52 -28.48 74 52.22 38.98 15.1 60.78 - - P H 12511 48.25 -25.75 74 55.63 38.71 15.59 61.68 - - P H 12511 39.46 -14.54 54 46.84 38.71 15.59 61.68 - - A H 14491 48.29 -25.71 74 54.78 40.51 16.48 63.48 - - P H 14491 39.5 -14.5 54 45.99 40.51 16.48 63.48 - - A H 17160 45.84 -22.36 68.2 48.12 37.9 18.23 58.41 - - P H 18000 52.22 -21.78 74 47.35 43.1 18.94 57.17 - - P H 18000 43.43 -10.57 54 38.56 43.1 18.94 57.17 - - A H H H H H 11440 45.29 -28.71 74 51.99 38.98 15.1 60.78 - - P V 12522 47.6 -26.4 74 54.96 38.72 15.6 61.68 - - P V 12522 38.81 -15.19 54 46.17 38.72 15.6 61.68 - - A V 14480 47.73 -26.27 74 54.21 40.52 16.47 63.47 - - P V 14480 38.94 -15.06 54 45.42 40.52 16.47 63.47 - - A V 17160 45.87 -22.33 68.2 48.15 37.9 18.23 58.41 - - P V 18000 52.49 -21.51 74 47.62 43.1 18.94 57.17 - - P V 18000 43.7 -10.3 54 38.83 43.1 18.94 57.17 - - A V V V V V Remark 1. No other spurious found. 2. All results are PASS against Peak and Average limit line. 3. The emission position marked as "-" means no suspected emission found with sufficient margin against limit line or noise floor only. 4. The emission level close to 18GHz is checked that the average emission level is noise floor only. TEL : 886-3-327-0868 Page Number : D30 of D35 FAX : 886-3-327-0855 FCC RADIO TEST REPORT Report No. : FR1N1011D UNII 2C - Straddle Channel WIFI 802.11ax HE40 Full (Harmonic @ 3m) WIFI Note Frequency Level Margin Limit Read Antenna Path Preamp Ant Table Peak Pol. Ant. Line Level Factor Loss Factor Pos Pos Avg. 5+4 ( MHz ) ( dBμV/m ) ( dB ) ( dBμV/m ) ( dBμV ) ( dB/m ) ( dB ) ( dB ) ( cm ) ( deg ) (P/A) (H/V) 802.11ax HE40 Full CH 142 5710MHz 11420 47.38 -26.62 74 54.05 39.04 15.09 60.8 - - P H 12500 47.45 -26.55 74 54.84 38.7 15.59 61.68 - - P H 12500 38.66 -15.34 54 46.05 38.7 15.59 61.68 - - A H 14480 49.1 -24.9 74 55.58 40.52 16.47 63.47 - - P H 14480 40.31 -13.69 54 46.79 40.52 16.47 63.47 - - A H 17130 46.35 -21.85 68.2 48.7 37.9 18.21 58.46 - - P H 18000 52.29 -21.71 74 47.42 43.1 18.94 57.17 - - P H 18000 43.5 -10.5 54 38.63 43.1 18.94 57.17 - - A H H H H H 11420 45.51 -28.49 74 52.18 39.04 15.09 60.8 - - P V 12621 47.64 -26.36 74 54.83 38.84 15.64 61.67 - - P V 12621 38.85 -15.15 54 46.04 38.84 15.64 61.67 - - A V 14480 48.52 -25.48 74 55 40.52 16.47 63.47 - - P V 14480 39.73 -14.27 54 46.21 40.52 16.47 63.47 - - A V 17130 45.63 -22.57 68.2 47.98 37.9 18.21 58.46 - - P V 18000 51.89 -22.11 74 47.02 43.1 18.94 57.17 - - P V 18000 43.1 -10.9 54 38.23 43.1 18.94 57.17 - - A V V V V V Remark 1. No other spurious found. 2. All results are PASS against Peak and Average limit line. 3. The emission position marked as "-" means no suspected emission found with sufficient margin against limit line or noise floor only. 4. The emission level close to 18GHz is checked that the average emission level is noise floor only. TEL : 886-3-327-0868 Page Number : D31 of D35 FAX : 886-3-327-0855 FCC RADIO TEST REPORT Report No. : FR1N1011D UNII 2C Straddle Channel WIFI 802.11ax HE80 Full (Harmonic @ 3m) WIFI Note Frequency Level Margin Limit Read Antenna Path Preamp Ant Table Peak Pol. Ant. Line Level Factor Loss Factor Pos Pos Avg. 5+4 ( MHz ) ( dBμV/m ) ( dB ) ( dBμV/m ) (dBμV) ( dB/m ) ( dB ) ( dB ) ( cm ) ( deg ) (P/A) (H/V) 802.11ax HE80 Full CH 138 5690MHz 11380 46.12 -27.88 74 52.…

Text truncated - open the document above for the full version.