J9CFENWAY-2802.11bg, BT, WWAN Combo Module

FENWAY-2 Global User Guide for UMTS/GSM 80-JA863-1 Rev. A June 2010 Submit technical questions at: https://support.cdmatech.com Restricted Distribution. Not to be distributed to anyone who is not an employee of either QUALCOMM or a subsidiary of QUALCOMM without the express approval of QUALCOMM's Configuration Management. Not to be used, copied, reproduced in whole or in part, nor its contents revealed in any manner to others without the express written permission of QUALCOMM Incorporated. QUALCOMM is a registered trademark of QUALCOMM Incorporated in the United States and may be registered in other countries. Other product and brand names may be trademarks or registered trademarks of their respective owners. CDMA2000 is a registered certification mark of the Telecommunications Industry Association, used under license. ARM is a registered trademark of ARM Limited. QDSP is a registered trademark of QUALCOMM Incorporated in the United States and other countries. This technical data may be subject to U.S. and international export, re-export, or transfer ("export") laws. Diversion contrary to U.S. and international law prohibited. QUALCOMM Incorporated 5775 Morehouse Drive San Diego, CA 92121-1714 U.S.A. Copyright © 2010 QUALCOMM Incorporated. All rights reserved. QUALCOMM Confidential and Proprietary 80-JA863-1 Rev. A2QUALCOMM Confidential and Proprietary MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Customer Affirmation for Technical Support* In order to facilitate Qualcomm’s compliance with a U.S. Federal Court injunction ruling dated 12/31/2007, acknowledgement of the following is required from each customer seeking technical assistance. Customer confirms that this support request is for a wireless terminal made, sold and used solely outside the USA if it falls within the following table: The foregoing restrictions shall not apply to wireless terminals represented to Qualcomm by Verizon Wireless as being exclusively made on their behalf. *Reference: 80-VH591-1 Revision B UMTS Qualcomm will not support for the U.S.: MSM6275, MSM6280, MSM7200, MSM7200A, ESM6270, ESM7205, ESM7205A 80-JA863-1 Rev. A3QUALCOMM Confidential and Proprietary MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 1Introduction 1.1Documentation overview ....................................................................................... 7 1.2Application description .......................................................................................... 8 1.3Terms and acronyms............................................................................................... 9 2External Connections 3DC Power and FENWAY-2 Operating Modes 3.1DC power source .................................................................................................. 14 3.2FENWAY-2 operating modes ............................................................................... 14 3.3Electrostatic discharge protection ........................................................................ 14 4RF Integration 4.1RF operating frequencies...................................................................................... 16 4.2RF connections ..................................................................................................... 16 4.3Ground connections.............................................................................................. 17 4.4Shielding and interference.................................................................................... 17 4.5Antenna considerations ........................................................................................ 18 5Standards and Regulatory Compliance 5.1Standards and certification ................................................................................... 19 5.2Regulatory information ........................................................................................ 20 5.2.1Safety warnings.................................................................................... 20 5.2.2North American compliance ................................................................ 20 5.2.3EU compliance ..................................................................................... 21 Contents 80-JA863-1 Rev. A4QUALCOMM Confidential and Proprietary MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION FENWAY-2 Global User Guide for UMTS/GSMContents Figures Figure 2-1 External connections — Front View ............................................................. 13 Figure 2-2 External connections — Back View .............................................................. 13 Figure 4-1 FENWAY-2 shields ....................................................................................... 17 80-JA863-1 Rev. A5QUALCOMM Confidential and Proprietary MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION FENWAY-2 Global User Guide for UMTS/GSMContents Tables Table 1-1FENWAY-2 documentation ............................................................................. 7 Table 1-2Reference documents ....................................................................................... 7 Table 1-3Reference documents ....................................................................................... 8 Table 1-4Terms and acronyms ........................................................................................ 9 Table 2-1Card connector pin assignments .................................................................... 11 Table 3-1FENWAY-2 operating modes and throughput rates....................................... 14 Table 4-1RF operating frequencies ............................................................................... 16 80-JA863-1 Rev. A6QUALCOMM Confidential and Proprietary MAY CONTAIN U.S.AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Revision history RevisionDateDescription AJune 2010Initial release 80-JA863-1 Rev. A7QUALCOMM Confidential and Proprietary MAY CONTAIN U.S. AND INTERNATION…

Text truncated - open the document above for the full version.

Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: J9CFENWAY-2 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Parts List Tune-Up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments: External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during the certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Paul Guckian Vice President, Engineering Qualcomm Incorporated 06/01/10

Applicant/Grantee Qualcomm INC. FCC ID: J9CFENWAY-2 Request for Modular Approval Request for Limited Modular Approval Requirements EUT Conditions Comply (Y/N) Single Modular Approval Requirements 1 The final device is designed for mobile or fixed operation (Portable is not permitted – Reference TCB Exclusion List (17 July 2002) II (g)). The module is designed for mobile applications. Y 2 The maximum antenna gain to allow compliance with RF exposure requirements is listed on the Grant of Certification for the module. The maximum antenna gain is 2.0dBi for WLAN and 0dBi for WWAN Y 3 The licensed module must have a FCC ID label on the module itself. That FCC ID label must be visible through a window on the final device or it must be visible when an access panel, door or cover is easily removed. If not, a second label must be placed on the outside of the final device that contains the following text: Contains “FCC ID: XXXXXXX” The licensed module has a FCC ID label. If the label is not visible on the final device, a second label will be placed on the outside of the final device that contains the following text: “FCC ID: J9CFENWAY-2”. Y 4 The Grant should include the following words in the device description or grant notes:“modular transmitter” or “transmitter module”. The grant will include the device description “modular transmitter” Y

Exhibit 9 Fenway External Photographs FCC Part 22, 24 & 27 Certification FCC ID: J9CFENWAY-2 Model: Fenway-2 STATEMENT OF CERTIFICATION The data, data evaluation and equipment configuration represented herein are a true and accurate representation of the measurements of the sample’s radio frequency interference emissions characteristics as of the dates and at the times of the test under the conditions herein specified. Report Prepared by: QUALCOMM Incorporated 5775 Morehouse Drive San Diego, CA 92121-1714

Exhibit 8 Fenway FCC Label and Location FCC Part 22 & 24 Certification FCC ID: J9CFENWAY-2 Model: Fenway-2 STATEMENT OF CERTIFICATION The data, data evaluation and equipment configuration represented herein are a true and accurate representation of the measurements of the sample’s radio frequency interference emissions characteristics as of the dates and at the times of the test under the conditions herein specified. Report Prepared by: QUALCOMM Incorporated 5775 Morehouse Drive San Diego, CA 92121-1714 FCC Label location FCC ID: J9CFENWAY-2 IC: 2723A-FENWAY2 MODEL#: FENWAY-2 QUALCOMM APPROVED DATE DESCRIPTION REV REVISIONS Adobe Illustrator CS 13.0.0 SCALE TITLE 5775 MOREHOUSE DRIVE SAN DIEGO, CA 92121-1714, USA SIZE B 1DN14 CAGE CODE DRAWING NO REV COPYRIGHT (C) 2009 QUALCOMM INCORPORATED. ALL RIGHTS RESERVED. QUALCOMM CONFIDENTIAL AND PROPRIETARY REV SH DWG NO. NOT TO BE USED, COPIED, REPRODUCED IN WHOLE OR IN PART, NOR ITS CONTENTS REVEALED IN ANY MANNER TO OTHERS WITHOUT THE EXPRESS WRITTEN PERMISSION OF QUALCOMM. THIS TECHNICAL DATA MAY BE SUBJECT TO U.S. AND INTERNATIONAL EXPORT, RE-EXPORT OR TRANSFER (”EXPORT”) LAWS. DIVERSION CONTRARY TO U.S. AND INTERNATIONAL LAW IS STRICTLY PROHIBITED. QUALCOMM IS A REGISTERED TRADEMARK OF QUALCOMM INCORPORATED IN THE UNITED STATES AND MAY BE REGISTERED IN OTHER COUNTRIES. OTHER PRODUCT AND BRAND NAMES MAY BE TRADEMARKS OR REGISTERED TRADEMEARKS OF THEIR RESPECTIVE OWNERS. AW15-JA850-P2 AW15-JA850-P2 SHEET 1 OF 1 B 1 B SEE ECO# C179635 T.DAWSON 6/2/10 B SIG ON FILE ARTWORK, MEDIA, LABEL, FCC ID, FENWAY 1:1 20.00 10.00

Exhibit 10 Fenway Internal Photographs FCC Part 22, 24 & 27 Certification FCC ID: J9CFENWAY-2 Model: Fenway-2 STATEMENT OF CERTIFICATION The data, data evaluation and equipment configuration represented herein are a true and accurate representation of the measurements of the sample’s radio frequency interference emissions characteristics as of the dates and at the times of the test under the conditions herein specified. Report Prepared by: QUALCOMM Incorporated 5775 Morehouse Drive San Diego, CA 92121-1714

FCC CFR47 PART 15 SUBPART C INDUSTRY CANADA RSS-210 ISSUE 7 CERTIFICATION TEST REPORT FOR 802.11BG, BT, WWAN COMBO MODULE MODEL NUMBER: FENWAY-2 FCC ID: J9CFENWAY-2 IC ID: 2723A-FENWAY2 REPORT NUMBER: 10U13243-1 ISSUE DATE: JUNE 02, 2010 Prepared for QUALCOMM 5775 MOREHOUSE DRIVE SAN DIEGO, CA. 92121, UNITED STATES Prepared by COMPLIANCE CERTIFICATION SERVICES 47173 BENICIA STREET FREMONT, CA 94538, U.S.A. TEL: (510) 771-1000 FAX: (510) 661-0888 REPORT NO: 10U13243-1 DATE: JUNE 02, 2010 FCC ID: J9CFENWAY-2 IC ID: 2723A-FENWAY2 Page 2 of 65 COMPLIANCE CERTIFICATION SERVICES FORM NO: CCSUP4031B 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of CCS. Revision History Rev. Issue Date Revisions Revised By -- 06/02/10 Initial Issue -- REPORT NO: 10U13243-1 DATE: JUNE 02, 2010 FCC ID: J9CFENWAY-2 IC ID: 2723A-FENWAY2 Page 3 of 65 COMPLIANCE CERTIFICATION SERVICES FORM NO: CCSUP4031B 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of CCS. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS.................................................................................... 5 2. TEST METHODOLOGY ........................................................................................................ 6 3. FACILITIES AND ACCREDITATION.................................................................................... 6 4. CALIBRATION AND UNCERTAINTY .................................................................................. 6 4.1. MEASURING INSTRUMENT CALIBRATION ............................................................... 6 4.2. MEASUREMENT UNCERTAINTY................................................................................ 6 5. EQUIPMENT UNDER TEST ................................................................................................. 7 5.1. DESCRIPTION OF EUT................................................................................................ 7 5.2. MAXIMUM OUTPUT POWER....................................................................................... 7 5.3. DESCRIPTION OF AVAILABLE ANTENNAS............................................................... 7 5.4. SOFTWARE AND FIRMWARE..................................................................................... 7 5.5. WORST-CASE CONFIGURATION AND MODE .......................................................... 7 5.6. DESCRIPTION OF TEST SETUP................................................................................. 8 6. TEST AND MEASUREMENT EQUIPMENT ....................................................................... 10 7. ANTENNA PORT TEST RESULTS .................................................................................... 11 7.1. 802.11b MODE IN THE 2.4 GHz BAND...................................................................... 11 7.1.1. 6 dB BANDWIDTH .............................................................................................. 11 7.1.2. 99% BANDWIDTH .............................................................................................. 14 7.1.3. OUTPUT POWER ............................................................................................... 17 7.1.4. AVERAGE POWER ............................................................................................ 20 7.1.5. POWER SPECTRAL DENSITY .......................................................................... 21 7.1.6. CONDUCTED SPURIOUS EMISSIONS............................................................. 24 7.2. 802.11g MODE IN THE 2.4 GHz BAND...................................................................... 28 7.2.1. 6 dB BANDWIDTH .............................................................................................. 28 7.2.2. 99% BANDWIDTH .............................................................................................. 31 7.2.3. OUTPUT POWER ............................................................................................... 34 7.2.4. AVERAGE POWER ............................................................................................ 37 7.2.5. POWER SPECTRAL DENSITY .......................................................................... 38 7.2.6. CONDUCTED SPURIOUS EMISSIONS............................................................. 41 8. RADIATED TEST RESULTS .............................................................................................. 45 8.1. LIMITS AND PROCEDURE ........................................................................................ 45 8.2. TRANSMITTER ABOVE 1 GHz .................................................................................. 46 8.2.1. TRANSMITTER ABOVE 1 GHz FOR 802.11b.................................................... 46 8.2.2. TRANSMITTER ABOVE 1 GHz FOR 802.11g MODE ........................................ 51 8.3. RECEIVER ABOVE 1 GHz ......................................................................................... 56 8.3.1. RECEIVER ABOVE 1 GHz.................................................................................. 56 8.4. WORST-CASE BELOW 1 GHz................................................................................... 57 REPORT NO: 10U13243-1 DATE: JUNE 02, 2010 FCC ID: J9CFENWAY-2 IC ID: 2723A-FENWAY2 Page 4 of 65 COMPLIANCE CERTIFICATION SERVICES FORM NO: CCSUP4031B 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of CCS. 9. MAXIMUM PERMISSIBLE EXPOSURE ............................................................................. 61 10. SETUP PHOTOS ............................................................................................................ 64 REPORT NO: 10U13243-1 DATE: JUNE 02, 2010 F…

Text truncated - open the document above for the full version.

REPORT NO: 10U13243-1 DATE: JUNE 02, 2010 FCC ID: J9CFENWAY-2 IC ID: 2723A-FENWAY2 Page 64 of 65 COMPLIANCE CERTIFICATION SERVICES FORM NO: CCSUP4031B 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of CCS. 10. SETUP PHOTOS ANTENNA PORT CONDUCTED RF MEASUREMENT SETUP ANTENNA PORT CONDUCTED PHOTO REPORT NO: 10U13243-1 DATE: JUNE 02, 2010 FCC ID: J9CFENWAY-2 IC ID: 2723A-FENWAY2 Page 65 of 65 COMPLIANCE CERTIFICATION SERVICES FORM NO: CCSUP4031B 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of CCS. RADIATED RF MEASUREMENT SETUP END OF REPORT RADIATED FRONT PHOTO RADIATED BACK PHOTO