Technical Specifications
| # | Rule Parts | Frequency Range | Power Output | Emission | Tolerance |
|---|
| 9 | 27 | 1.71 GHz - 1.75 GHz | 287.00 mW | 4M15F9W | 2.5
ppm |
Modular TypeLimited Single Modular ApprovalConfidentialityLong Term Grant NotesPower Output listed is Conducted. The highest radiated power measured in specific configurations shown in filing is Part 22 1.584W ERP, Part 24 1.622W EIRP, Part 27 0.446W EIRP. This device contains 900/1800/2100 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited Modular Approval for use as a module in only Mobile or Fixed exposure conditions. Antenna gain including cable loss must not exceed 4dBi in Cellular 800MHz band and 3.5dBi in PCS 1900MHz/AWS 1700MHz bands for purposes of 2.1043 and 2.1091. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and may be co-located and operated in conjunction with antennas or transmitters within the parameters documented in the Mobile RF exposure documentation of this filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products requires the submission of a Class II permissive change application, where appropriate; and containing data demonstrating compliance for SAR, MPE, spurious emissions, ERP/EIRP, and host/module authentication, or new application. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
