J9CIEMHSDPAIEM6270 Part 22/24 GSM/GPRS/EDGE/UMTS/HSDPA Module

Qualcomm Confidential and Proprietary QUALCOMM is a registered trademark of QUALCOMM Incorporated in the United States and may be registered in other countries. Other product and brand names may be trademarks or registered trademarks of their respective owners. CDMA2000 is a registered certification mark of the Telecommunications Industry Association, used under license. ARM is a registered trademark of ARM Limited. QDSP is a registered trademark of QUALCOMM Incorporated in the United States and other countries. This technical data may be subject to U.S. and international export, re-export, or transfer (“export”) laws. Diversion contrary to U.S. and international law is strictly prohibited. QUALCOMM Incorporated 5775 Morehouse Drive San Diego, CA 92121-1714 U.S.A. Copyright © 2011 QUALCOMM Incorporated. All rights reserved. IEM6270 Regulatory User Manual and Host Guidelines 80-H7163-9 Rev. A July 9, 2011 Submit technical questions at: [email protected] 80-H7163-9 Rev. A 2 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Revision history Revision Date Description A July 2011 Initial release 80-H7163-9 Rev. A 3 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Contents 1 Introduction ...................................................................................................... 5 1.1 Host Device Summary Authorized under Limited Modular Approval ......................... 5 2 Safety Information ........................................................................................... 6 2.1 Safety Warnings for Stand Alone Module and/or Host Products ................................. 6 2.2 Radio Frequency Emissions .......................................................................................... 6 2.2.1 Safety and Wireless Devices.............................................................................. 7 2.2.2 Can I minimize my RF exposure? ..................................................................... 7 2.3 FCC Part 15 .................................................................................................................. 8 2.4 Industry Canada ............................................................................................................ 8 3 Host Installation Guidelines ........................................................................... 9 3.1 Host Installation Guidelines .......................................................................................... 9 3.1.1 Label Requirements ........................................................................................... 9 3.1.2 Fixed-mount and Mobile Hosts (WWAN-to-user separation distance ≥ 20cm) 9 3.1.3 Portable Hosts (WWAN to user separation distance <20cm) .......................... 10 3.1.4 End User Installation ....................................................................................... 10 3.1.5 Simultaneous RF Exposure Evaluation Guidelines for Collocated Transmitters Allowable through a Class I Permissive change (Mobile/Fixed Hosts only) ........... 10 IEM6270 Regulatory User Manual and Host Guidelines Introduction 80-H7163-9 Rev. A 4 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Tables Table 3-1 Maximum WWAN Conducted Power and Antenna Gain ............................................................ 9 Table 3-2 WWAN and Collocated Device Standalone MPE Calculations ................................................ 11 Table 3-3 WWAN 850 MHz Collocation Power Density ......................................................................... 11 Table 3-4 WWAN 1900 MHz Collocation Power Density ....................................................................... 11 80-H7163-9 Rev. A 5 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 1 Introduction This document provides  IEM6270 safety information  IEM6270 Host Requirements allowing leverage of the IEM6270 limited modular approval. 1.1 Host Device Summary Authorized under Limited Modular Approval The IEM6270 can be installed into a host product without further certification requirements for the following device configurations: a. Fixed-mount or mobile host devices † where a minimum of 20 cm separation distance is provided between the transmitting antenna and the end user that can be installed without a Class I or Class II Permissive Change process. b. Collocated with fixed or mobile host devices within the technical requirements defined in Section 3.1 of his document Other host installations are available through a Class II change or new system certification. Installation into a “portable” host device where <20cm between the transmission antenna and end user is not authorized as a Class I permissive change. Portable host devices require a new certification or Class II permissive change where RF safety is addressed through a Specific Absorption Rate (“SAR”) Report. The IEM6270 is not intended for installation into notebook computers as described in KDB Publication 616217 ** and associated supplemental procedures. For equipment in which the RF exposure classification is unclear (see CFR 47 §2.1091(d)(4)), consult with the module OEM and/or the FCC for guidance. Any collocated transmitter or antenna that does not meet the technical requirements defined in this document requires a Class II permissive change to authorize simultaneous transmission. † Mobile equipment, as defined in CFR 47 §2.1091(b). Fixed-mount hosts are non-mobile equipment that are either fixed in place or large equipment that is not easily moved. ** KDB 616217 is the FCC procedure SAR Evaluation Considerations for Laptop Computers with Antennas Built-in on Display Screens. IEM6270 Regulatory User Manual and Host Guidelines Safety Information 80-H7163-9 Rev. A 6 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 2 Safety Information The following safety warnings and usage considerations are applicable to the IEM6270 module itself and integrated host p…

Text truncated - open the document above for the full version.

QUALCOMM Incorporated 5775 Morehouse Drive San Diego, CA 92121-1714 www.qualcomm.com Federal Communications Commision Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, Maryland 21046 July 9, 2011 Subject: Application for IEM6270 Part 22/24 GSM/GPRS/EDGE/UMTS/HSDPA Module Qualcomm Incorporated herein submits the Application for Equipment Authorization (FCC Form 731) and Exhibits for Type Acceptance of a 850/1900 MHz GSM/GPRS/UMTS/HSDPA Transceiver, FCC ID: J9CIEMHSDPA. Applicant: Qualcomm Incorporated 5775 Morehouse Drive San Diego, CA 92121-1714 The IEM6270 interfaces with a host device through a 90 pin board-to-board connector supporting power and I/Os. RF is routed onboard the IEM6270. Antennas are connected to the module through a primary WWAN TX/RX RF connector and a second connector supporting WWAN diversity (RX only) and GPS. Test reports have not been provided for other frequency bands supported by the IEM6270 but not utilized in the United States. All necessary information is provided in the supporting attachments. Please contact me at Tel: (858) 845-7428 or Email: [email protected] if there are any questions or additional information needed. Sincerely, John Forrester Principal Engineer Qualcomm Incorporated

Applicant/Grantee QUALCOMM Incorporated FCC ID: J9CIEM6270 Request for Modular Approval Request for Limited Modular Approval Requirements EUT Conditions Comply (Y/N) Single Modular Approval Requirements 1 The final device is designed for mobile or fixed operation (Portable is not permitted – Reference TCB Exclusion List (17 July 2002) II (g)). Host devices are not specifically identified for the IEM6270. Only fixed and mobile host devices are approved in the Limited Modular Approval. Yes 2 The maximum antenna gain to allow compliance with RF exposure requirements is listed on the Grant of Certification for the module. 850 MHz: Documented 5dBi in MPE report to allow declared collocated operation. 1900MHz: 3dBi for compliance with the Part 24 maximum transmit power requirement Yes 3 The licensed module must have a FCC ID label on the module itself. That FCC ID label must be visible through a window on the final device or it must be visible when an access panel, door or cover is easily removed. If not, a second label must be placed on the outside of the final device that contains the following text: Contains “FCC ID: XXXYYYY” The IEM6270 has a label on the device. Final devices must comply with FCC label requirements. Yes 4 The Grant should include the following words in the device description or grant notes:“modular transmitter” or “transmitter module”. Transmit Module Yes

QUALCOMM Incorporated 5775 Morehouse Drive San Diego, CA 92121-1714 www.qualcomm.com June 9, 2011 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Subject: Request of Confidentiality for FCC ID: J9CIEMHSDPA To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR47), Qualcomm Incorporated hereby requests confidential treatment of information accompanying this Application as outlined in the table below. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters may be harmful to the Applicant and provide unjust benefits to its competitors. The requested Confidential and Temporary Confidential exhibits are listed in the table below. The Applicant understands that pursuant to Rule -.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant of the Application Confidentiality Type Name Exhibit Type Long Term Confidential IEM6270 Operation Description and FCC Documentation Operation Description & Documentation IEM6270 Block Diagram Block Diagram IEM6270 Parts List Parts List and Tune-up Procedure IEM6270 Schematic Schematic Sincerely, John Forrester Principal Engineer Qualcomm Incorporated

QUALCOMM Incorporated _________ 5775 Morehouse Drive San Diego, CA 92121-1714 www.qualcomm.com April 29, 2011 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Authorization of Handling FCC Regulatory Applications To Whom It May Concern: I, hereby, authorize Mr. John Forrester, to handle FCC Regulatory related applications for QUALCOMM Incorporated and sign all required application documents. Best Regards, Paul Guckian VP, Engineering QUALCOMM Incorporated 5775 Morehouse Drive San Diego, CA 92121 Office: 858-651-1547 [email protected]

Date: June 23, 2008 Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize Ms. Claire Hoque/Application Examiner of Compliance Engineering Services, Inc., d.b.a. Compliance Certification Services and hereafter referred to as CCS, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Ms. Claire Hoque of CCS on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing CCS as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Paul Guckian VP, EMC/Regulatory Engineering QUALCOMM Incorporated

QUALCOMM is a registered trademark of QUALCOMM Incorporated in the United States and may be registered in other countries. Other product and brand names may be trademarks or registered trademarks of their respective owners. CDMA2000 is a registered certification mark of the Telecommunications Industry Association, used under license. ARM is a registered trademark of ARM Limited. QDSP is a registered trademark of QUALCOMM Incorporated in the United States and other countries. This technical data may be subject to U.S. and international export, re-export, or transfer (“export”) laws. Diversion contrary to U.S. and international law is strictly prohibited. QUALCOMM Incorporated 5775 Morehouse Drive San Diego, CA 92121-1714 U.S.A. Copyright © 2011 QUALCOMM Incorporated. All rights reserved. IEM6270 Regulatory Internal Photos 80-H7163-7 Rev. A July 9, 2011 Submit technical questions at: [email protected] 80-H7163-7 Rev. A 2 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Revision history Revision Date Description A July 2011 Initial release Internal Photos IEM6270 Regulatory Internal Photos 80-H7163-7 Rev. A 3 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 1 Internal Photos Figure 1 IEM6270 Internal Photo: Front Internal Photos IEM6270 Regulatory Internal Photos 80-H7163-7 Rev. A 4 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Figure 2 IEM6270 Internal Photo: Rear

QUALCOMM is a registered trademark of QUALCOMM Incorporated in the United States and may be registered in other countries. Other product and brand names may be trademarks or registered trademarks of their respective owners. CDMA2000 is a registered certification mark of the Telecommunications Industry Association, used under license. ARM is a registered trademark of ARM Limited. QDSP is a registered trademark of QUALCOMM Incorporated in the United States and other countries. This technical data may be subject to U.S. and international export, re-export, or transfer (“export”) laws. Diversion contrary to U.S. and international law is strictly prohibited. QUALCOMM Incorporated 5775 Morehouse Drive San Diego, CA 92121-1714 U.S.A. Copyright © 2011 QUALCOMM Incorporated. All rights reserved. IEM6270 Regulatory Label 80-H7163-8 Rev. A July 9, 2011 Submit technical questions at: [email protected] 80-H7163-8 Rev. A 2 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Revision history Revision Date Description A July 2011 Initial release Regulatory Label IEM6270 Regulatory Label 80-H7163-8 Rev. A 3 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 1 Regulatory Label Figure 1 IEM6270 Label

QUALCOMM is a registered trademark of QUALCOMM Incorporated in the United States and may be registered in other countries. Other product and brand names may be trademarks or registered trademarks of their respective owners. CDMA2000 is a registered certification mark of the Telecommunications Industry Association, used under license. ARM is a registered trademark of ARM Limited. QDSP is a registered trademark of QUALCOMM Incorporated in the United States and other countries. This technical data may be subject to U.S. and international export, re-export, or transfer (“export”) laws. Diversion contrary to U.S. and international law is strictly prohibited. QUALCOMM Incorporated 5775 Morehouse Drive San Diego, CA 92121-1714 U.S.A. Copyright © 2011 QUALCOMM Incorporated. All rights reserved. IEM6270 Regulatory Internal Photos 80-H7163-6 Rev. A July 9, 2011 Submit technical questions at: [email protected] 80-H7163-6 Rev. A 2 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Revision history Revision Date Description A July 2011 Initial release Internal Photos IEM6270 Regulatory Internal Photos 80-H7163-6 Rev. A 3 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 1 Internal Photos Figure 1 IEM6270 Internal Photo: Front Internal Photos IEM6270 Regulatory Internal Photos 80-H7163-6 Rev. A 4 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Figure 2 IEM6270 Internal Photo: Rear

QUALCOMM is a registered trademark of QUALCOMM Incorporated in the United States and may be registered in other countries. Other product and brand names may be trademarks or registered trademarks of their respective owners. CDMA2000 is a registered certification mark of the Telecommunications Industry Association, used under license. ARM is a registered trademark of ARM Limited. QDSP is a registered trademark of QUALCOMM Incorporated in the United States and other countries. This technical data may be subject to U.S. and international export, re-export, or transfer (“export”) laws. Diversion contrary to U.S. and international law is strictly prohibited. QUALCOMM Incorporated 5775 Morehouse Drive San Diego, CA 92121-1714 U.S.A. Copyright © 2011 QUALCOMM Incorporated. All rights reserved. IEM6270 FCC MPE Evaluation 80-H7163-5 Rev. A July 9, 2011 Submit technical questions to: [email protected] 80-H7163-5 Rev. A 2 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Revision history Revision Date Description A July 2011 Initial release 80-H7163-5 Rev. A 3 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 1 Internal Photos 1.1 Introduction This Maximum Permissive Exposure (“MPE”) report demonstrates compliance for the IEM6270 GSM/GPRS/EDGE/UMTS/HSDPA module with FCC CFR 47 §1.1310 and 2.1091 for standalone and collocated simultaneous transmission in mobile exposure conditions. The MPE analysis is valid for transmitters operating within the parameters defined in Table 2 used for analysis. Any collocated transmitter must have a valid FCC ID documenting equivalent or degraded RF characteristics with the collocated parameters defined in this MPE analysis. The mobile classification applies when 20 cm or more separation distance is maintained between the end user and both WWAN and WLAN transmission antennas. The WWAN MPE calculations in the filing are based on the nominal WWAN conducted transmit power level defined in the FCC/IC filing and declared maximum allowable antenna gains to comply with maximum radiated transmit power levels or collocated transmitter operations. Portable user conditions or additional collocated modules not allowed based on this RF exposure analysis require a Class II permissive change and updated MPE or SAR report. 1.2 Collocated Transmitters This MPE analysis is applicable to any collocated transmitters within the frequency and EIRP parameters used in the MPE calculations in sections 3 and 5.2. Specific FCC IDs for those devices are not necessary or identified in this analysis providing they are classified as mobile transmitters. 80-H7163-5 Rev. A 4 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 2 Transmitter Summary Table summarizes transmitter parameters associated with this application. The WWAN modes of operation reflect the IEM6270 module parameters while the unlicensed transmit power and antenna gain parameters represent a maximum transmit power for a given frequency band. Integration of a collocated transmitter that exceeds the parameters in Table 1 requires a new FCC authorization or permissive change application. Table 1 WWAN and WLAN Declared Transmitter Parameters Technology Frequency (MHz) Maximum Conducted Power (dBm) Conducted Power (W) Maximum Antenna Gain (dBi) Duty Cycle Peak EIRP (dBm) Peak EIRP (W) ERP (W) GPRS 2 UL 824 33.0 2.00 5.00 0.25 38.00 6.31 3.82 UMTS 824 24.0 0.25 5.00 1.00 29.00 0.79 0.48 GPRS 2 UL 1850 30.0 1.00 3.00 0.25 33.00 2.00 1.21 UMTS 1850 24.00 0.25 3.00 1.00 27.00 0.50 0.30 Any 400-800 1.00 27 0.5 0.3 Any 800-1000 1.00 29 0.79 0.48 Any >1000 1.00 33.00 2.00 1.21 80-H7163-5 Rev. A 5 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 3 RF Exposure Limits and Equations According to FCC CFR 47 §1.1310, the criteria listed in the following table shall be used to evaluate the environmental impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b). Table 1 Limits for Maximum Permissible Exposure (MPE) Friis transmission formula: P d P out G 4R 2 Where, P d = power density (mW/cm2) P out = output power to antenna (mW) G = gain of antenna in linear scale R = distance between observation point and center of the radiator (cm) Table 2 shows duty cycles for typical technologies. Table 2 Technology Duty Cycles for MPE Calculations Technology Duty Cycle WCDMA 100% GSM 12.5% GPRS Cat 10 (2 Uplink Transmit Slots) 25.0% 80-H7163-5 Rev. A 6 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 4 MPE Calculations 4.1 Stand Alone Transmitter Calculations The power density calculations for standalone transmitters at an exposure separation distance of 20 cm are shown in Table 3 per the transmit power and antenna gain values declared in Table . For frequency dependent limits, the lowest transmitter frequency was used to represent the lowest MPE limit (e.g. 824MHz = 0.549 mW/cm 2 ). The WLAN power levels listed represent the worst-case values for the corresponding frequency ranges given. Table 3 WWAN and WLAN Standalone MPE Calculations Technology Frequency (MHz) Maximum Conducted Power (dBm) Conducted Power (W) Maximum Antenna Gain (dBi) Duty Cycle Average EIRP (dBm) Average EIRP (W) Power Density @ 20cm (mW/cm ^2) FCC MPE Limit (mW/c m^2) GPRS 2 UL 824 33.0 2.00 5.00 0.25 31.98 1.58 0.314 0.549 UMTS 824 24.0 0.25 5.00 1.00 29.00 0.79 0.158 0.549 GPRS 2 UL 1850 30.0 1.00 3.00 0.25 26.98 0.50 0.099 1.000 UMTS 1850 24.00 0.25 3.00 1.00 27.00 0.50 0.100 1.000 Any 400 27.00 0.50 0.100 0.267 Any 800 30.00 0.79 0.158 0.533 Any >1GHz 33.00 2.00 0.397 1.000 IEM6270 FCC MPE Evaluation MPE Calculations 80-H7163-5 Rev. A 7 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 4.2 Collocated MPE Calculations Per OET 65, when RF sources have difference frequencies, the fraction of the FCC power density limit shall be determined and the sum of all fractional components shall be less than 1. Table 4 WWAN 850 MHz Collocation Power Density WLAN Band WL…

Text truncated - open the document above for the full version.

global solutions : local support ª Heptaband external wireless antenna offers ultimate bandwidth with over seven frequency ranges Laird Technologies Heptaband portable wireless antennas provide excellent radio transmission characteristics while offering the ultra flexibility of seven bands in one profile. With operating frequencies of 824 - 894 MHz, 880 - 960 MHz, 1575 MHz, 1710 - 1880MHz, 1850 - 1990 MHz, 1920 - 2170 MHz, 2400 - 2500 MHz, the antenna is the ideal choice when multiple band widths are required in various regional and global applications. Additionally, the blade style antenna features both knuckle and swivel snap-in or SMA/TNC/RPTNC connector options. Features and Benefits: Operates simultaneously in more than seven frequency bands • supporting - Cellular, Quadband GSM+UMTS/3G, GPS, AWS, WIFI, WLAN and WISP Available in knuckle swivel snap or SMA/TNC/RPTNC • connector options. Blade style external antenna measures only 7.33”• Applications Wireless Terminal, Point-of-Sale, Machine to Machine, • Automatic Meter Reading and Home Security Heptaband ™ Exterior Wireless Antennas www.lairdtech.com For sales information: In the USA please telephone +1-800-323-3757 In Asia please telephone +886-2-2286-2828 In Europe please telephone +46-8-555-722-00 Heptaband ™ Exterior Wireless Antennas global solutions : local support ª IAS-SPEC-HEPTABAND-03/08 Any information furnished by Laird Technologies and its agents is believed to be accurate and reliable. Responsibility for the use and application of Laird Technologies materials rests with the end user since Laird Technologies and its agents cannot be aware of all potential uses. Laird Technologies makes no warranties as to the fitness, merchantability, or suitability of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies domestic terms and conditions of sale in effect from time to time, a copy of which will be furnished upon request. SpEcIFIcAtIonS: Electrical Frequency Range: 824-894 MHz, 880-960 MHz, 1575 MHz, 1710-1880 MHz, 1850-1990 MHz, 1920-2170 MHz, 2400-2500 MHz Gain 1 - 3 dBi VSWR <2.5:1 polarization Linear Azimuth (3dB beamwidth) Omnidirectional Impedance 50 Ω power 10 W Mounting Style Snap-in/Captive, SMA, RPSMA, TNC, RPTNC Dimensions (mm) 6.3" x .36" (161 x 9.3) typical Azimuth pattern Model number part number Mounting Style color HEptA-SM MAF94300 SMA Black HEptA-RSM MAF94301 RP-SMA Black HEptA-tn-G MAF94302 TNC Gray HEptA-Rtn MAF94303 RP-TNC Black HEptA-Ip04 MAF94304 SNAPIN/CAPTIVE, 100mm of RG178 coax Black with I-PEX connector HEptA-MMcX04 MAF94305 SNAPIN/CAPTIVE, 100mm of RG178 coax Black MMCX connector HEptA-FL04 MAF94306 SNAPIN/CAPTIVE, 100mm of RG178 coax Black flying lead HEptA-tn MAF94307 TNC Black HEptA90-tn MAF94309 TNC, Blade Angle - 90 degree Black typical Elevation pattern

Final Report on IEM6270 MUS_QUALCOMM_1005_FCC22b acc. Title 47 CFR chapter I part 22 subpart H Report Reference: Au gust 01, 2011Date: Test Laboratory: 7 layers AG Borsigstr. 11 DGA-PL-192/99-02 40880 Ratingen Germany Note: The following test results relate only to the devices specified in this document. This report shall not be reproduced in parts without the written approval of the test laboratory. 7 layers AG Aufsichtsratsvorsitzender h Registergerichth registered in: B orsigst ra sse 11 Chairma n of t he Supervisory Board: Düsseldorf, HRB 44096 40880 Ratingen, Germany Markus Becker USt-IdNr h VAT No.: Phone: +49 (0) 2102 749 0 Vorstandh Board: DE 203159652 Fax: +49 (0) 2102 749 350 Dr. H.-J. Meckelburg TAX No. 147/5869/0385 www.7Layers.com Wilfried Klassmann Reference: MUS_QUALCOMM_1005_FCC22b acc. Title 47 CFR chapter I part 22 subpart H 1Administrative Data 1.1Project Data Yao JingPro ject Responsible: 2011/08/01Date Of Test Re port: 2011/05/05Date of first test: 2011/05/17Date of last test: 1.2Applicant Data Company Name:Qualcomm Corporation 5775 Morehouse Dr.Street: San Diego CA 92121City: Contact Person:Mr. Sanjiv Madan +1-858 658-2183Phone: [email protected]: 1.3Test Laboratory Data The following list shows all places and laboratories involved for test result generation: 7 layers DE Company Name :7 layers AG Street :Borsigstrasse 11 City :40880 Ratingen Country :Germany Contact Person :Mr. Michael Albert Phone :+49 2102 749 201 Fax :+49 2102 749 444 E Mail :[email protected] Laboratory Details Accreditation InfoLab IDIdentificationResponsible DAR-Registration no. DGA-PL-192/99-02Radiated EmissionsLab 1Mr. Robert Machulec Mr. Andreas Petz DAR-Registration no. DGA-PL-192/99-02Radio LabLab 2Mr. Robert Machulec Mr. Andreas Petz Page 2 of 131 Reference: MUS_QUALCOMM_1005_FCC22b acc. Title 47 CFR chapter I part 22 subpart H 2.2Detailed Description of OUT Samples Sample : b01 OUT IdentifierIEM6270 Sample Description Serial No.0CN-001S HW StatusP4 RevE SW Status21925 Low VoltageLow Temp.3.6 V-10 °C High Temp.High Voltage4.2 V55 °C Normal Temp.Nominal Voltage4.2 V23 °C 2.3OUT Features Features for OUT: IEM6270 Allowed ValuesDesignationDescriptionSupported Value(s) Features for scope: FCC_v2 ACThe OUT is powered by or connected to AC Mains DCThe OUT is powered by or connected to DC Mains EDGE850EUT supports EDGE in the band 824 MHz - 849 MHz EDGE1900EUT supports EDGE in the band 1850 MHz - 1910 MHz FDD2EUT supports UMTS FDD2 in the band 1850 MHz - 1910 MHz FDD5EUT supports UMTS FDD5 in the band 824 MHz - 849 MHz GSM850EUT supports GSM850 band 824MHz - 849MHz HSDPA- FDD2 EUT supports UMTS FDD2 HSDPA in the band 1850 MHz - 1910 MHz HSDPA- FDD5 EUT supports UMTS FDD5 HSDPA in the band 824 MHz - 849 MHz PantCpermanent fixed antenna connector, which may be built-in, designed as an indispensable part of the equipment PCS1900EUT supports PCS1900 band 1850MHz - 1910MHz 2.4Auxiliary Equipment AE No.Serial No.SW StatusHW StatusDescriptionType Designation AE 02Heptaband external antenna ---Antenna for GPS AE 01Heptaband external antenna ---Antenna for GSM/UMTS AE 03N10FD5GCC---Test board Page 4 of 131 Reference: MUS_QUALCOMM_1005_FCC22b acc. Title 47 CFR chapter I part 22 subpart H 2.5Setups used for Testing For each setup a relation is given to determine if and which samples and auxiliary equipment is used. The left side list all OUT samples an…

Text truncated - open the document above for the full version.