J9CQM8626GSM/WCDMA/CDMA + BLUETOOTH + DTS/UNII a/b/g/n RADIO MODULE

Qualcomm Technologies, Inc. Other Qualcomm products referenced herein are products of Qualcomm Technologies, Inc. or its other subsidiaries. © 2015 Qualcomm Technologies, Inc. All rights reserved. QM8626 Modular Certification OEM Integrator Instructions 80-KA570-12 Rev. B August 12, 2015 ` Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. All Qualcomm Incorporated trademarks are used with permission. Other product and brand names may be trademarks or registered trademarks of their respective owners. This technical data may be subject to U.S. and international export, re-export, or transfer (“export”) laws. Diversion contrary to U.S. and international law is strictly prohibited. Qualcomm Technologies, Inc. 5775 Morehouse Drive San Diego, CA 92121 U.S.A. Questions or comments: https://createpoint.qti.qualcomm.com/ 80-KA570-12 Rev. B MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 3 Revision history Revision Date Description A July 2015 Initial release B August 2015 Added FCC review comments 80-KA570-12 Rev. B MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 4 Contents 1 Introduction ........................................................................................................................... 6 2 Applicable Module ................................................................................................................ 7 3 Available Global Modular Approvals from Qualcomm Technologies, Inc. ....................... 8 4 Additional Regulatory Conformance Testing and/or Submissions Required by the Integrator ................................................................................................................ 9 5 Compliant/Allowable Transmit Power ................................................................................10 6 Allowable Antennas to Use with the Radio Module ...........................................................11 7 Antenna Placement Inside the Host System and RF Safety..............................................12 8 Simultaneous Transmission with Other Integrated or Plug-In Radios .............................13 9 Module May Not Be Installed by End Users .......................................................................14 10 Required Labeling on the Outside of the Host .................................................................15 10.1 FCC ....................................................................................................................................................... 15 10.2 European Community R&TTE ............................................................................................................... 15 11 Required Labeling on the Module .....................................................................................17 11.1 FCC labeling on the Module .................................................................................................................. 17 11.2 Rest of world labeling on the Module ..................................................................................................... 17 11.3 Instructions to download the sample global label artwork with certification IDs ..................................... 17 12 Required Regulatory Wording for User Manual/Installation Manual ..............................18 12.1 FCC compliance information .................................................................................................................. 18 12.2 Industry Canada notice .......................................................................................................................... 19 12.3 European Community (R&TTE) user manual wording and declaration .................................................. 20 12.4 European Community (R&TTE) Declaration of Conformity for System .................................................. 22 12.5 Korea user manual wording ................................................................................................................... 22 13 OEM Integrator Checklist ..................................................................................................23 QM8626 Modular Certification OEM Integrator Instructions Contents 80-KA570-12 Rev. B MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 5 Figures Figure 3-1 Non-Disclosure Agreement ........................................................................................................................... 8 Tables Table 6-1 Allowed maximum gain (dBi), including antenna cable loss ........................................................................ 11 Table 12-1 EU CE mark compliance statements.......................................................................................................... 20 Table 12-2 Restrictions for use of 2.4 GHz frequencies in European community countries ......................................... 21 80-KA570-12 Rev. B MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 6 1 Introduction This document describes the steps that the OEM integrator must follow when designing and manufacturing a system utilizing a Qualcomm Technologies, Inc. (QTI) QM8626 radio module (the “Module”). Failure to follow the instructions in this document may invalidate the FCC certification and authorization of the Module for use in the U.S. and in other countries. The QM8626 modular certifications described in this document apply only to radio conformance for the Module. The OEM integrator is responsible for all system-level electromagnetic interference/electromagnetic compatibility (EMI/EMC) and product safety testing and certifications that apply to the host system in the U.S. and other countries where the system will be marketed or sold. 80-KA570-12 Rev. B MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 7 2 Applicable Module  Part Number: QM8626  FCC ID: J9CQM8626  IC: 2723A-QM8626 80-KA570-12 Rev. B MAY CONTAIN U.…

Text truncated - open the document above for the full version.

Tuesday, July 21, 2015 UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Paul Guckian Vice President Qualcomm Technologies, Inc. REMARK: 1. This authorization letter will be sent along with your application when filing with UL Verification Services Inc. 2. Please follow the format and type it on company letterhead and send original to us. 3. Authorized signature must be in agreement with grantee code contact in FCC database and Industry Canada contact information.

Wednesday, August 19, 2015 Federal Communications Commission Equipment Authorization branch 7435 Oakland Mills Road Columbia, MD 21046 Re: Request for Confidentiality Gentlemen: In reference to the application under FCC ID: J9CQM8626, and pursuant to Sections 0.457(d)(l)(ii) and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of the accompanying information as outlined below: Schematics Bill of Material Operational Description These documents contain detailed system and equipment description and related information about the product that Qualcomm Technologies, Inc. considers to be proprietary, confidential, and a custom design and, otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, Qualcomm Technologies, Inc. considers that this information would be of benefit to its competitors, and that disclosure of the information in these documents would give competitors an unfair advantage in the market. Sincerely, ________________________ Paul Guckian VP, Engineering Qualcomm Technologies, Inc.

Applicant/Grantee Qualcomm Technologies Inc. FCC ID: J9CQM8626 Section 15.212 Modular Transmitters Request for Modular Approval X Request for Limited Modular Approval Requirements EUT Conditions Comply (Y/N) Single Modular Approval Requirements 1 The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. The QM8626 module is fully shielded to prevent interference between the host and the module (See external photos exhibit). YES 2 The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. The buffer is provided through USB connection. See schematics for details. YES 3 The modular transmitter must have its own power supply regulation. The power for the QM8626 module is supplied by the PM8x26 regulated power supply that is integrated in to the module. YES 4 The modular transmitter must comply with the antenna and transmission system requirements of Sections 15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). The “professional installation” provision of Section 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. Uses a IPEX MHF4L connector YES 5 The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing for compliance with Part 15 requirements. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in Section 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see Section 15.27(a)). The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to All tests reported in this application were performed on a stand-alone basis. YES insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available (see Section 15.31(i)). 6 The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. (A) If using a permanently affixed label, the modular transmitter must be labeled with its own FCC identification number, and, if the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: XYZMODEL1” or “Contains FCC ID: XYZMODEL1.” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. (B) If the modular transmitter uses an electronic display of the FCC identification number, the information must be readily accessible and visible on the modular transmitter or on the device in which it is installed. If the module is installed inside another device, then the outside of the device into which the module is installed must display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains FCC certified transmitter module(s).” Any similar wording that expresses the same meaning may be used. The user manual must include instructions on how to access the electronic display. A copy of these instructions must be included in the application for equipment authorization. The modular transmitter has a permanently affixed label with it’s own FCC ID. YES 7 The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these The modular transmitter complies with all specific rules and operating requirements that apply to a complete transmitter. An integration instruction manual is included with the module. YES instructions must be included in the application for equipment authorization. 8 The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. The QM8626 module will be installed in a host product where the transmitting antenna can provide 20 cm separation distance to the body of user. Installation of this module in a portable configuration is not allowed unless proper equipment authorization has been obtained YES A limited modular approval may be granted for single or split modular transmitters that do not comply with all of the above requirements, e.g., shielding, minimum signaling amplitude, buffered modulation/data inputs, or power supply regulation, if the manufacturer can demonstrate by alternative means in the application for equipment authorization that the modular transmitter meets all the applicable Part 15 requirements under the operating conditions in which the transmitter will be used. Limited modular approval also may be granted in those instances where compliance with RF exposure rules is demonstrated only for particular product configurations. The applicant for certification must state how control of the…

Text truncated - open the document above for the full version.

Qualcomm Technologies, Inc. INTERNAL USE ONLY Confidential and Proprietary – Qualcomm Technologies, Inc. NO PUBLIC DISCLOSURE PERMITTED: Please report postings of this document on public servers or websites to: [email protected]. Restricted Distribution: Not to be distributed to anyone who is not an employee of either Qualcomm Technologies, Inc. or its affiliated companies without the express approval of Qualcomm Configuration Management. Not to be used, copied, reproduced, or modified in whole or in part, nor its contents revealed in any manner to others without the express written permission of Qualcomm Technologies, Inc. © 2015 Qualcomm Technologies, Inc. All rights reserved. QM8626 External Photographs 80-KA570-11 Rev. A June 30, 2015 ` Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. All Qualcomm Incorporated trademarks are used with permission. Other product and brand names may be trademarks or registered trademarks of their respective owners. This technical data may be subject to U.S. and international export, re-export, or transfer (“export”) laws. Diversion contrary to U.S. and international law is strictly prohibited. Qualcomm Technologies, Inc. 5775 Morehouse Drive San Diego, CA 92121 U.S.A. 80-KA570-11 Rev. A Confidential and Proprietary – Qualcomm Technologies, Inc. 3 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Revision history Revision Date Description A June 2015 Initial release 80-KA570-11 Rev. A Confidential and Proprietary – Qualcomm Technologies, Inc. 4 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Contents 1 Certification ........................................................................................................................... 5 2 External Photographs QM8626 ............................................................................................ 6 2.1 Side A ........................................................................................................................................................ 6 2.2 Side B ........................................................................................................................................................ 7 Tables Table 1-1 FCC certification ........................................................................................................................................... 5 Table 1-2 Statement of certification ............................................................................................................................... 5 80-KA570-11 Rev. A Confidential and Proprietary – Qualcomm Technologies, Inc. 5 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 1 Certification Table 1-1 FCC certification FCC certification FCC ID: J9CQM8626 Model: QM8626 Table 1-2 Statement of certification Statement of Certification The d ata, data evaluation, and equipment configuration represented herein are a true and accurate representation of the measurements of the sample’s radio frequency interference emissions characteristics as of the dates and at the times of the test under the conditions herein specified. Report prepared by: Qualcomm Tec hnologies, Inc. 5775 Morehouse Drive San Diego, CA 92121-1714 80-KA570-11 Rev. A Confidential and Proprietary – Qualcomm Technologies, Inc. 6 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 2 External Photographs QM8626 2.1 Side A QM8626 External Photographs External Photographs QM8626 80-KA570-11 Rev. A Confidential and Proprietary – Qualcomm Technologies, Inc. 7 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 2.2 Side B

Qualcomm Technologies, Inc. © 2015 Qualcomm Technologies, Inc. All rights reserved. QM8626 Module Label Document 80-KA570-16 Rev. B August 14, 2015 ` Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. All Qualcomm Incorporated trademarks are used with permission. Other product and brand names may be trademarks or registered trademarks of their respective owners. This technical data may be subject to U.S. and international export, re-export, or transfer (“export”) laws. Diversion contrary to U.S. and international law is strictly prohibited. Qualcomm Technologies, Inc. 5775 Morehouse Drive San Diego, CA 92121 U.S.A. 80-KA570-16 Rev. B MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 3 Revision history Revision Date Description A July 2015 Initial release B August 2015 Change model number 80-KA570-16 Rev. B MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 4 Contents 1 QM8626 Labels ...................................................................................................................... 5 Figures Figure 1-1 QM8626 FCC/IC label shown at 100% ........................................................................................................ 5 Figure 1-2 QM8626 FCC/IC label placement ................................................................................................................ 5 80-KA570-16 Rev. B MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 5 1 QM8626 Labels Figure 1-1 QM8626 FCC/IC label shown at 100% Figure 1-2 QM8626 FCC/IC label placement FCC ID: J9CQM8626 IC: 2723A-QM8626 007-ABXXXX MSIP-CRM-XXX-XXXX

Qualcomm Technologies, Inc. INTERNAL USE ONLY Confidential and Proprietary – Qualcomm Technologies, Inc. NO PUBLIC DISCLOSURE PERMITTED: Please report postings of this document on public servers or websites to: [email protected]. Restricted Distribution: Not to be distributed to anyone who is not an employee of either Qualcomm Technologies, Inc. or its affiliated companies without the express approval of Qualcomm Configuration Management. Not to be used, copied, reproduced, or modified in whole or in part, nor its contents revealed in any manner to others without the express written permission of Qualcomm Technologies, Inc. © 2015 Qualcomm Technologies, Inc. All rights reserved. QM8626 Internal Photographs 80-KA570-10 Rev. A June 30, 2015 ` Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. All Qualcomm Incorporated trademarks are used with permission. Other product and brand names may be trademarks or registered trademarks of their respective owners. This technical data may be subject to U.S. and international export, re-export, or transfer (“export”) laws. Diversion contrary to U.S. and international law is strictly prohibited. Qualcomm Technologies, Inc. 5775 Morehouse Drive San Diego, CA 92121 U.S.A. 80-KA570-10 Rev. A Confidential and Proprietary – Qualcomm Technologies, Inc. 3 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Revision history Revision Date Description A June 2015 Initial release 80-KA570-10 Rev. A Confidential and Proprietary – Qualcomm Technologies, Inc. 4 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION Contents 1 Certification ........................................................................................................................... 5 2 Internal Photographs QM8626 .............................................................................................. 6 2.1 Side A ........................................................................................................................................................ 6 2.2 Side B ........................................................................................................................................................ 7 Tables Table 1-1 FCC certification ........................................................................................................................................... 5 Table 1-2 Statement of certification ............................................................................................................................... 5 80-KA570-10 Rev. A Confidential and Proprietary – Qualcomm Technologies, Inc. 5 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 1 Certification Table 1-1 FCC certification FCC certification FCC ID: J9CQM8626 Model: QM8626 Table 1-2 Statement of certification Statement of Certification Th e data, data evaluation, and equipment configuration represented herein are a true and accurate representation of the measurements of the sample’s radio frequency interference emissions characteristics as of the dates and at the times of the test under the conditions herein specified. Report prepared by: Qualcomm Technologies, Inc. 5775 Morehouse Drive San Diego, CA 92121-1714 80-KA570-10 Rev. A Confidential and Proprietary – Qualcomm Technologies, Inc. 6 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 2 Internal Photographs QM8626 2.1 Side A QM8626 Internal Photographs Internal Photographs QM8626 80-KA570-10 Rev. A Confidential and Proprietary – Qualcomm Technologies, Inc. 7 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 2.2 Side B

Qualcomm Technologies, Inc. © 2015 Qualcomm Technologies, Inc. All rights reserved. QM8626 Antenna Document 80-KA570-18 Rev. B August 12, 2015 Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. All Qualcomm Incorporated trademarks are used with permission. Other product and brand names may be trademarks or registered trademarks of their respective owners. This technical data may be subject to U.S. and international export, re-export, or transfer (“export”) laws. Diversion contrary to U.S. and international law is strictly prohibited. Qualcomm Technologies, Inc. 5775 Morehouse Drive San Diego, CA 92121 U.S.A. 80-KA570-18 Rev. B MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 3 Revision history Revision Date Description A July 2015 Initial release B August 2015 Added antenna images, Figure 2-3 and Figure 3-3 80-KA570-18 Rev. B MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 4 Contents 1 Introduction ........................................................................................................................... 5 1.1 Acronyms and definitions ........................................................................................................................... 5 2 WWAN Antenna ..................................................................................................................... 6 2.1 Primary WWAN antenna - low band .......................................................................................................... 6 2.2 Primary WWAN antenna - high band ......................................................................................................... 8 3 WLAN/BT Antenna ...............................................................................................................11 3.1 WLAN/BT - 2402 to 2480 MHz ................................................................................................................ 13 3.2 WLAN - 5180 to 5825 MHz ...................................................................................................................... 14 Figures Figure 2-1 WWAN low band antenna pattern ................................................................................................................. 7 Figure 2-2 WWAN high band antenna pattern ............................................................................................................... 9 Figure 2-3 WWAN high band antenna ......................................................................................................................... 10 Figure 3-1 WLAN/BT low band antenna pattern........................................................................................................... 13 Figure 3-2 WLAN/BT high band antenna pattern ......................................................................................................... 14 Figure 3-3 WLAN/BT antenna ...................................................................................................................................... 15 Tables Table 1-1 Acronyms and definitions ............................................................................................................................... 5 Table 2-1 Primary WWAN antenna - low band .............................................................................................................. 6 Table 2-2 Primary WWAN antenna - high band ............................................................................................................. 8 Table 3-1 WLAN/BT antenna ....................................................................................................................................... 11 80-KA570-18 Rev. B MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 5 1 Introduction The QM8626 module was tested with two monopole stamped metal transmit antennas: one antenna for Wireless Wide Area Network ( WWAN) and the other antenna for Wireless Local Area Network ( WLAN)/ Bluetooth (BT). The antenna performance data is listed in the following chapter. 1.1 Acronyms and definitions Table 1- 1 lists terms that are used in this document. Table 1-1 Acronyms and definitions Term Definition BT Bluetooth WLAN Wireless Local Area Network WWAN Wireless Wide Area Network 80-KA570-18 Rev. B MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 6 2 WWAN Antenna This section details the WWAN antenna performance data. 2.1 Primary WWAN antenna - low band  Gain: -0.3 dBi Table 2-1 Primary WWAN antenna - low band Primary antenna, WWAN - low band Frequency (MHz) Peak gain (dB) Efficiency (dB) 820 -1.8 -3.8 830 -1.3 -3.4 840 -1.4 -3 .4 850 -1.1 -3.2 860 -0.9 -3.1 870 -0.6 -3.0 880 -0.3 -2.9 890 -0.3 -2.9 900 0.1 -2.6 910 0.0 -2.7 920 0.0 -2.7 930 -0…

Text truncated - open the document above for the full version.