J9CQSIP71807c Modular Platform

All Qualcomm products mentioned herein are products of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. Other product and brand names may be trademarks or registered trademarks of their respective owners. This technical data may be subject to U.S. and international export, re-export, or transfer (“export”) laws. Diversion contrary to U.S. and international law is strictly prohibited. Qualcomm Technologies, Inc. 5775 Morehouse Drive San Diego, CA 92121 U.S.A. © 2020 Qualcomm Technologies, Inc. and/or its subsidiaries. All rights reserved. QSIP7180/QSIP7180P Module Integrator Instruction 80-11139-4 Rev. AD September 22, 2020 80-11139-4 Rev. AD MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 2 Revision history Revision Date Description AA July 2020 Initial release AB September 2020 Updated AC September 2020 Updated AD September 2020 Updated 80-11139-4 Rev. AD MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 3 Contents 1 Introduction ............................................................................................................................................... 6 2 Product Overview ...................................................................................................................................... 7 3 Available Global Modular Approvals from Qualcomm .............................................................................. 8 4 Integrated Product Test and Certification Requirements .......................................................................... 9 5 Additional Regulatory Conformance Testing and/or Submissions Required by the Integrator .............. 11 6 Compliant/Allowable Tx Power File ......................................................................................................... 12 7 Allowable Antennas to Use with the Radio Module ................................................................................ 13 7.1 Antenna Filing Process in Japan, Korea and Taiwan ................................................................... 15 7.1.1 Notification of all antenna models to be used with the Module .................................. 15 8 Antenna Placement Inside the Host System and RF Exposure ................................................................ 16 9 Simultaneous Transmission with Other Integrated or Plug-In Radios ..................................................... 17 10 Required Labeling on the Outside of the Host ....................................................................................... 18 10.1 FCC ............................................................................................................................................ 18 10.2 European Community Radio Equipment Directive (RED) ......................................................... 18 10.3 Taiwan NCC ............................................................................................................................... 19 10.3.1 For host system use QSIP7180P (WIFI SKU). The NCC requires a label on the outside of the host system visible to the end user. ...................................... 19 10.3.2 For host system use QSIP7180 (WWAN+WIFI SKU). The NCC requires host system to obtain a unique NCC certificate and approval number. QSIP7180 NCC certificate maybe leveraged during host system NCC certification process. ............................................................................. 19 10.4 Other countries ......................................................................................................................... 20 11 Required Labeling on the Module ......................................................................................................... 21 11.1 FCC labeling on the Module ..................................................................................................... 21 11.2 Rest of the world labeling on the Module ................................................................................ 21 12 Required Regulatory Wording for User Manual/Installation Manual ................................................... 22 12.1 FCC compliance information .................................................................................................... 22 12.2 European Community (RED) user manual wording and declaration ....................................... 23 QSIP7180/QSIP7180P Module Integrator Instruction Contents 80-11139-4 Rev. AD MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 4 12.3 European Community (RED) Declaration of Conformity for System ........................................ 24 12.4 Brazil user manual wording ...................................................................................................... 24 12.5 Taiwan user manual wording ................................................................................................... 25 12.6 Japan user manual wording ...................................................................................................... 26 12.7 India user manual wording ....................................................................................................... 26 80-11139-4 Rev. AD MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 5 Tables Table 4-1 47CFR Rules Parts Addressed in Modular Certification .............................................................. 10 Table 7-1 Allowed maximum gain (dBi), including antenna cable loss ....................................................... 13 80-11139-4 Rev. AD MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 6 1 Introduction This document provides information regulatory information and process required for a host product that integrates the QSIP7180 module. It addresses both using the QSIP7180 module in a host product and obtaining certifications/authorizations for the specific markets…

Text truncated - open the document above for the full version.

Thursday, July 11, 2019 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To Whom It May Concern: I, hereby, authorize Mr. John Forrester, to handle FCC Regulatory related applications for Qualcomm Technologies, Inc. and sign all required application documents. Best Regards, ____________________ Paul Guckian VP, Engineering Office: 858-651-1547 [email protected] 5775 Morehouse Drive, San Diego, CA 92121 Qualcomm Technologies, Inc. www.qualcomm.com

• • • • • • • • • •

PHOTOGRAPHS OF EUT Report No.: EP042002 Brand Name: Qualcomm/ Model Name: QSIP7180 TEL : 886-3-327-3456 Page Number : 1 of 6 FAX : 886-3-328-4978 Issued Date : Sep. 17, 2020 Report Version : 01 1.External Photograph of EUT PHOTOGRAPHS OF EUT Report No.: EP042002 Brand Name: Qualcomm/ Model Name: QSIP7180 TEL : 886-3-327-3456 Page Number : 2 of 6 FAX : 886-3-328-4978 Issued Date : Sep. 17, 2020 Report Version : 01 720510 PHOTOGRAPHS OF EUT Report No.: EP042002 Brand Name: Qualcomm/ Model Name: QSIP7180 TEL : 886-3-327-3456 Page Number : 3 of 6 FAX : 886-3-328-4978 Issued Date : Sep. 17, 2020 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP042002 Brand Name: Qualcomm/ Model Name: QSIP7180 TEL : 886-3-327-3456 Page Number : 4 of 6 FAX : 886-3-328-4978 Issued Date : Sep. 17, 2020 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP042002 Brand Name: Qualcomm/ Model Name: QSIP7180 TEL : 886-3-327-3456 Page Number : 5 of 6 FAX : 886-3-328-4978 Issued Date : Sep. 17, 2020 Report Version : 01

All Qualcomm products mentioned herein are products of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. Other product and brand names may be trademarks or registered trademarks of their respective owners. This technical data may be subject to U.S. and international export, re-export, or transfer (“export”) laws. Diversion contrary to U.S. and international law is strictly prohibited. Qualcomm Technologies, Inc. 5775 Morehouse Drive San Diego, CA 92121 U.S.A. © 2020 Qualcomm Technologies, Inc. and/or its subsidiaries. All rights reserved. QSIP7180 - Label Document 80-11139-41 Rev. AA September 24, 2020 FCC Use Only 80-11139-41 Rev. AA MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 2 Revision history Revision Date Description AA September 2020 Initial release FCC Use Only QSIP7180 - Label Document 80-11139-41 Rev. AA MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 3 Contents 1 QSIP7180 Label .......................................................................................................................................... 4 2 Label Placement ......................................................................................................................................... 5 FCC Use Only QSIP7180 - Label Document 80-11139-41 Rev. AA MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 4 1 QSIP7180 Label The Label shall be permanently fixed at a prominent position on the host device. □ Regulatory Model: QSIP7180 □ FCC ID:J9CQSIP7180 FCC Use Only QSIP7180 - Label Document 80-11139-41 Rev. AA MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 5 2 Label Placement FCC Use Only

PHOTOGRAPHS OF EUT Report No.: EP042002 Brand Name: Qualcomm/ Model Name: QSIP7180 TEL : 886-3-327-3456 Page Number : 6 of 6 FAX : 886-3-328-4978 Issued Date : Sep. 17, 2020 Report Version : 01 ─────THE END────

TEL : 886-3-327-3456 Page : 1 of 9 FAX : 886-3-328-4978 Issued Date : Sep. 23, 2020 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA042002 RF EXPOSURE EVALUATION REPORT FCC ID : J9CQSIP7180 Equipment : 7c Modular Platform Brand Name : Qualcomm Model Name : QSIP7180 Applicant : Qualcomm Technologies, Inc. 5775 Morehouse Dr.San Diego, CA 92121-1714 (USA) Manufacturer : Qualcomm Technologies, Inc. 5775 Morehouse Dr.San Diego, CA 92121-1714 (USA) Standard : 47 CFR Part 2.1091 We, SPORTON INTERNATIONAL INC has been evaluated this product in accordance with 47 CFR Part 2.1091 and it complies with applicable limit. The results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory, the test report shall not be reproduced except in full. Sporton Lab is accredited to ISO 17025 by Taiwan Accreditation Foundation (TAF code: 1190) and the FCC designation No. TW1190 under the FCC 2.948(e) by Mutual Recognition Agreement (MRA) in FCC evaluation. SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City, Taiwan (R.O.C.) Approved by: Cona Huang / Deputy Manager TEL : 886-3-327-3456 Page : 2 of 9 FAX : 886-3-328-4978 Issued Date : Sep. 23, 2020 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA042002 Table of Contents 1. DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ............................................................................. 4 2. MAXIMUM RF AVERAGE OUTPUT POWER AMONG PRODUCTION UNITS ........................................ 5 3. RF EXPOSURE LIMIT INTRODUCTION .................................................................................................... 6 4. RADIO FREQUENCY RADIATION EXPOSURE EVALUATION ............................................................... 7 4.1. Standalone Power Density Calculation ............................................................................................. 7 4.2. Collocated Power Density Calculation ............................................................................................... 8 TEL : 886-3-327-3456 Page : 3 of 9 FAX : 886-3-328-4978 Issued Date : Sep. 23, 2020 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA042002 History of this test report Report No. Version Description Issued Date FA042002 Rev. 01 Initial issue of report Sep. 23, 2020 TEL : 886-3-327-3456 Page : 4 of 9 FAX : 886-3-328-4978 Issued Date : Sep. 23, 2020 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA042002 1. Description of Equipment Under Test (EUT) Product Feature & Specification EUT Type 7c Modular Platform Brand Name Qualcomm Model Name QSIP7180 FCC ID J9CQSIP7180 Wireless Technology and Frequency Range WCDMA Band II: 1850 MHz ~ 1910 MHz WCDMA Band V: 824 MHz ~ 849 MHz LTE Band 2: 1850 MHz ~ 1910 MHz LTE Band 4: 1710 MHz ~ 1755 MHz LTE Band 5: 824 MHz ~ 849 MHz LTE Band 7: 2500 MHz ~ 2570 MHz LTE Band 12: 699 MHz ~ 716 MHz LTE Band 13: 777 MHz ~ 787 MHz LTE Band 14: 788 MHz ~ 798 MHz LTE Band 17: 704 MHz ~ 716 MHz LTE Band 25: 1850 MHz ~ 1915 MHz LTE Band 26: 814 MHz ~ 849 MHz LTE Band 30: 2305 MHz ~ 2315 MHz LTE Band 38: 2570 MHz ~ 2620 MHz LTE Band 41: 2496 MHz ~ 2690 MHz LTE Band 66: 1710 MHz ~ 1780 MHz LTE Band 71: 663 MHz ~ 698 MHz WLAN 2.4GHz Band: 2400 MHz ~ 2483.5 MHz WLAN 5.2GHz Band: 5150 MHz ~ 5250 MHz WLAN 5.3GHz Band: 5250 MHz ~ 5350 MHz WLAN 5.6GHz Band: 5470 MHz ~ 5725 MHz WLAN 5.8GHz Band: 5725 MHz ~ 5825 MHz Bluetooth: 2400 MHz ~ 2483.5 MHz Mode RMC 12.2Kbps HSDPA HSUPA LTE: QPSK, 16QAM, 64QAM WLAN: 802.11a/b/g/n/ac HT20/HT40/VHT20/VHT40/VHT80 Bluetooth BR/EDR/LE EUT Stage Identical Prototype Remark: The above EUT's information was declared by manufacturer. Please refer to the specifications or user's manual for more detailed description. Reviewed by: Jason Wang Report Producer: Wan Liu TEL : 886-3-327-3456 Page : 5 of 9 FAX : 886-3-328-4978 Issued Date : Sep. 23, 2020 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA042002 2. Maximum RF average output power among production units Mode Maximum Average power(dBm) WCDMA Band II 25.70 Band V 25.20 LTE Band 2 25.70 Band 4 25.70 Band 5 25.20 Band 7 25.20 Band 12 25.20 Band 13 25.20 Band 14 25.20 Band 17 25.20 Band 25 25.70 Band 26 25.20 Band 30 24.00 Band 38 25.20 Band 41 27.20 Band 66 25.20 Band 71 25.20 Mode Maximum Average power(dBm) 2.4GHz WLAN 2Tx Total Power 22.50 5GHz WLAN 2Tx Total Power 22.50 Bluetooth 12.00 TEL : 886-3-327-3456 Page : 6 of 9 FAX : 886-3-328-4978 Issued Date : Sep. 23, 2020 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA042002 3. RF Exposure Limit Introduction According to ANSI/IEEE C95.1-1992, the criteria listed in Table 1 shall be used to evaluate the environmental impact of human exposure to radio frequency (RF) radiation as specified in §1.1310. The MPE was calculated at 20 cm to show compliance with the power density limit. The following formula was used to calculate the Power Density: 퐒= 퐏퐆 ퟒ훑퐑 ퟐ Where: S = Power Density P = Output Power at Antenna Terminals G = Gain of Transmit Antenna (linear gain) R = Distance from Transmitting Antenna TEL : 886-3-327-3456 Page : 7 of 9 FAX : 886-3-328-4978 Issued Date : Sep. 23, 2020 Form version: 200414 RF EXPOSURE EVALUATION REPORT Report No. : FA042002 4. Radio Frequency Radiation Exposure Evaluation 4.1. Standalone Power Density Calculation Band Antenna Gain (dBi) Maximum Power (dBm) Maximum ERP (dBm) Maximum ERP (W) Maximum EIRP (dBm) Maximum EIRP (W) Maximum Output Power Limit (W) Average EIRP (mW) Power Density at 20cm (mW/cm^2) Limit (mW/cm^2) WCDMA Band 2 7.00 25.70 30.550 1.135 32.700 1.862 2.000 1862.087 0.371 1.000 WCDMA Band 5 9.00 25.20 32.050 1.603 34.200 2.630 7.000 2630.268 0.524 0.549 LTE Band 2 7.00 25.70 30.550 1.135 32.700 1.862 2.000 1862.087 0.371 1.000 LTE Band 4 4.00 25.70 27.550 0.569 29.700 0.933 1.000 933.254 0.186 1.000 LTE B…

Text truncated - open the document above for the full version.

TEL : 886-3-327-3456 Page Number : 1 of 20 FAX : 886-3-328-4978 Issued Date : Sep. 17, 2020 Report Template No.: BU5-FZ15EDFS Version 1.1 Report Version : 01 FCC DFS TEST REPORT Report No. : FZ042002-06 FCC DFS TEST REPORT FCC ID : J9CQSIP7180P Equipment : 7c Modular Platform Brand Name : Qualcomm Model Name : QSIP7180P Applicant : Qualcomm Technologies, Inc. 5775 Morehouse Dr.San Diego, CA 92121-1714 (USA) Manufacturer : Qualcomm Technologies, Inc. 5775 Morehouse Dr.San Diego, CA 92121-1714 (USA) Standard : FCC Part 15 Subpart E The product was received on Jun. 08, 2020 and testing was started from Jun. 15, 2020 and completed on Jun. 15, 2020. We, SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory, would like to declare that the tested sample has been evaluated in accordance with the procedures given in FCC Part 15 Subpart E and shown compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory, the test report shall not be reproduced except in full. Approved by: Louis Wu SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City, Taiwan (R.O.C.) TEL : 886-3-327-3456 Page Number : 2 of 20 FAX : 886-3-328-4978 Issued Date : Sep. 17, 2020 Report Template No.: BU5-FZ15EDFS Version 1.1 Report Version : 01 FCC DFS TEST REPORT Report No. : FZ042002-06 Table of Contents History of this test report ................................................................................................................................. 3 Summary of Test Result................................................................................................................................... 4 1 General Description ................................................................................................................................... 5 1.1 Feature of Equipment Under Test .................................................................................................... 5 1.2 Modification of EUT .......................................................................................................................... 5 1.3 Testing Site ....................................................................................................................................... 5 1.4 Applied Standards ............................................................................................................................ 6 1.5 Support Unit used in test configuration and system ......................................................................... 7 2 Requirements and Parameters for DFS Test ........................................................................................... 8 2.1 Summary of Dynamic Frequency Selection Test ............................................................................. 8 2.2 Applicability of DFS Requirements ................................................................................................... 9 2.3 Interference Threshold values, Master or Client incorporating In-Service Monitoring ................... 10 2.4 DFS Response requirement values ................................................................................................ 10 2.5 Short Pulse Radar Test Waveforms ............................................................................................... 11 3 Calibration Setup and DFS Test Results ............................................................................................... 12 3.1 Calibration of Radar Waveform ...................................................................................................... 12 3.2 In-Service Monitoring: Channel Move Time, Channel Closing Transmission Time and Non-Occupancy Period ................................................................................................................... 14 4 List of Measuring Equipment .................................................................................................................. 20 Appendix A. Setup Photographs TEL : 886-3-327-3456 Page Number : 3 of 20 FAX : 886-3-328-4978 Issued Date : Sep. 17, 2020 Report Template No.: BU5-FZ15EDFS Version 1.1 Report Version : 01 FCC DFS TEST REPORT Report No. : FZ042002-06 History of this test report Report No. Version Description Issue Date FZ042002-06 01 Initial issue of report Sep. 17, 2020 TEL : 886-3-327-3456 Page Number : 4 of 20 FAX : 886-3-328-4978 Issued Date : Sep. 17, 2020 Report Template No.: BU5-FZ15EDFS Version 1.1 Report Version : 01 FCC DFS TEST REPORT Report No. : FZ042002-06 Summary of Test Result Report Clause Ref Std. Clause Test Items Result (PASS/FAIL) Remark 3.2 7.8.3 Channel Move Time Pass 0.2148 sec Channel Closing Transmission time Pass <200ms + 0.4 ms (aggregate) Non-Occupancy Period and Client Beacon Test Pass No transmission or Beacons occurred Note: Since the product is client without radar detection function, only Channel Move Time, Channel Closing Transmission Time and Non-Occupancy Period Test are required to be performed. Declaration of Conformity: The test results with all measurement uncertainty excluded are presented in accordance with the regulation limits or requirements declared by manufacturers. Comments and Explanations: The declared of product specification for EUT presented in the report are provided by the manufacturer, and the manufacturer takes all the responsibilities for the accuracy of product specification. Reviewed by: Wii Chang Report Producer: Yimin Ho TEL : 886-3-327-3456 Page Number : 5 of 20 FAX : 886-3-328-4978 Issued Date : Sep. 17, 2020 Report Template No.: BU5-FZ15EDFS Version 1.1 Report Version : 01 FCC DFS TEST REPORT Report No. : FZ042002-06 1 General Description 1.1 Feature of Equipment Under Test Bluetooth, Wi-Fi 2.4GHz 802.11b/g/n/ac, Wi-Fi 5GHz 802.11a/n/ac. Antenna Information …

Text truncated - open the document above for the full version.

TEL : 886-3-327-3456 Page Number : 1 of 29 FAX : 886-3-328-4978 Issued Date : Sep. 17, 2020 Report Template No.: BU5-FR15EWL AC MA Version 2.4 Report Version : 01 FCC RADIO TEST REPORT Report No. : FR042002-06D FCC RADIO TEST REPORT FCC ID : J9CQSIP7180P Equipment : 7c Modular Platform Brand Name : Qualcomm Model Name : QSIP7180P Applicant : Qualcomm Technologies, Inc. 5775 Morehouse Dr.San Diego, CA 92121-1714 (USA) Manufacturer : Qualcomm Technologies, Inc. 5775 Morehouse Dr.San Diego, CA 92121-1714 (USA) Standard : FCC Part 15 Subpart E §15.407 The product was received on Jun. 08, 2020 and testing was started from Jun. 11, 2020 and completed on Aug. 04, 2020. We, SPORTON INTERNATIONAL INC., EMC & Wireless Communications Laboratory, would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory, the test report shall not be reproduced except in full. Approved by: Louis Wu SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City, Taiwan (R.O.C.) TEL : 886-3-327-3456 Page Number : 2 of 29 FAX : 886-3-328-4978 Issued Date : Sep. 17, 2020 Report Template No.: BU5-FR15EWL AC MA Version 2.4 Report Version : 01 FCC RADIO TEST REPORT Report No. : FR042002-06D Table of Contents History of this test report ................................................................................................................................. 3 Summary of Test Result................................................................................................................................... 4 1 General Description ................................................................................................................................... 5 1.1 Product Feature of Equipment Under Test ........................................................................................ 5 1.2 Modification of EUT ........................................................................................................................... 5 1.3 Testing Location ................................................................................................................................ 6 1.4 Applicable Standards ......................................................................................................................... 6 2 Test Configuration of Equipment Under Test ......................................................................................... 7 2.1 Carrier Frequency and Channel ........................................................................................................ 7 2.2 Test Mode .......................................................................................................................................... 8 2.3 Connection Diagram of Test System ............................................................................................... 10 2.4 Support Unit used in test configuration and system ........................................................................ 10 2.5 EUT Operation Test Setup .............................................................................................................. 10 2.6 Measurement Results Explanation Example ................................................................................... 11 3 Test Result ................................................................................................................................................ 12 3.1 26dB & 99% Occupied Bandwidth Measurement ........................................................................... 12 3.2 Maximum Conducted Output Power Measurement ........................................................................ 14 3.3 Power Spectral Density Measurement ............................................................................................ 16 3.4 Unwanted Emissions Measurement ................................................................................................ 19 3.5 Automatically Discontinue Transmission ......................................................................................... 24 3.6 Antenna Requirements .................................................................................................................... 26 4 List of Measuring Equipment .................................................................................................................. 27 5 Uncertainty of Evaluation ........................................................................................................................ 29 Appendix A. Conducted Test Results Appendix B. Radiated Spurious Emission Appendix C. Radiated Spurious Emission Plots Appendix D. Duty Cycle Plots Appendix E. Setup Photographs TEL : 886-3-327-3456 Page Number : 3 of 29 FAX : 886-3-328-4978 Issued Date : Sep. 17, 2020 Report Template No.: BU5-FR15EWL AC MA Version 2.4 Report Version : 01 FCC RADIO TEST REPORT Report No. : FR042002-06D History of this test report Report No. Version Description Issued Date FR042002-06D 01 Initial issue of report Sep. 17, 2020 TEL : 886-3-327-3456 Page Number : 4 of 29 FAX : 886-3-328-4978 Issued Date : Sep. 17, 2020 Report Template No.: BU5-FR15EWL AC MA Version 2.4 Report Version : 01 FCC RADIO TEST REPORT Report No. : FR042002-06D Summary of Test Result Report Clause Ref Std. Clause Test Items Result (PASS/FAIL) Remark 3.1 15.403(i) 26dB Bandwidth Pass - 3.1 2.1049 99% Occupied Bandwidth Reporting only - 3.2 15.407(a) Maximum Conducted Output Power Pass - 3.3 15.407(a) Power Spectral Density Pass - 3.4 15.407(b) Unwanted Emissions Pass Under limit 1.24 dB at 5150.000 MHz - 15.207 AC Conducted Emission Not Required - 3.5 15.407(c) Automatically Discontinue Transmission…

Text truncated - open the document above for the full version.

TEL : 886-3-327-3456 Page Number : C1 of C151 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FR042002-06D Appendix C. Radiated Spurious Emission Test Engineer : Leo Lee, Mancy Chou and Bigshow Wang Temperature : 21.4~22.9°C Relative Humidity : 52~61% Note symbol -L Low channel location -R High channel location TEL : 886-3-327-3456 Page Number : C2 of C151 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FR042002-06D Band 1 - 5150~5250MHz WIFI 802.11a (Band Edge @ 3m) WIFI Band 1 5150~5250MHz Band Edge @ 3m ANT 802.11a CH36 5180MHz 0+1 Horizontal Fundamental Peak Avg. Left blank TEL : 886-3-327-3456 Page Number : C3 of C151 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FR042002-06D WIFI Band 1 5150~5250MHz Band Edge @ 3m ANT 802.11a CH36 5180MHz 0+1 Vertical Fundamental Peak Avg. Left blank TEL : 886-3-327-3456 Page Number : C4 of C151 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FR042002-06D WIFI Band 1 5150~5250MHz Band Edge @ 3m ANT 802.11a CH44 5220MHz - L 0+1 Horizontal Fundamental Peak Avg. Left blank TEL : 886-3-327-3456 Page Number : C5 of C151 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FR042002-06D WIFI Band 1 5150~5250MHz Band Edge @ 3m ANT 802.11a CH44 5220MHz - R 0+1 Horizontal Fundamental Peak Left blank Avg. Left blank TEL : 886-3-327-3456 Page Number : C6 of C151 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FR042002-06D WIFI Band 1 5150~5250MHz Band Edge @ 3m ANT 802.11a CH44 5220MHz - L 0+1 Vertical Fundamental Peak Avg. Left blank TEL : 886-3-327-3456 Page Number : C7 of C151 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FR042002-06D WIFI Band 1 5150~5250MHz Band Edge @ 3m ANT 802.11a CH44 5220MHz - R 0+1 Vertical Fundamental Peak Left blank Avg. Left blank TEL : 886-3-327-3456 Page Number : C8 of C151 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FR042002-06D WIFI Band 1 5150~5250MHz Band Edge @ 3m ANT 802.11a CH48 5240MHz - L 0+1 Horizontal Fundamental Peak Avg. Left blank TEL : 886-3-327-3456 Page Number : C9 of C151 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FR042002-06D WIFI Band 1 5150~5250MHz Band Edge @ 3m ANT 802.11a CH48 5240MHz - R 0+1 Horizontal Fundamental Peak Left blank Avg. Left blank TEL : 886-3-327-3456 Page Number : C10 of C151 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FR042002-06D WIFI Band 1 5150~5250MHz Band Edge @ 3m ANT 802.11a CH48 5240MHz - L 0+1 Vertical Fundamental Peak Avg. Left blank TEL : 886-3-327-3456 Page Nu…

Text truncated - open the document above for the full version.