J9CTT210Q1Trailer Tracks Service

Qualcomm Technologies, Inc.

Click to zoom

Application Details

Equipment Class: DSS - Part 15 Spread Spectrum Transmitter
Date of Grant: Jan 30, 2011
Application Purpose: Original Equipment
Date of Application: Jan 27, 2011
Equipment Note: Trailer Tracks Service
Frequency Range: 2402.00000000 - 2480.00000000
Company: Qualcomm Technologies, Inc.
Country: United States

Documents & Files

Select a file to view

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

80-J7615-1 September 2010 QUALCOMM Incorporated 5775 Morehouse Drive San Diego, California 92121-1714 US TT210 Hardware Installation and Diagnostic Guide R DRAFT QUALCOMM Incorporated 5775 Morehouse Drive San Diego, CA 92121-1714 U.S.A. © 2010 QUALCOMM Incorporated. All rights reserved. Qualcomm and Qualcomm Enterprise Services are registered trademarks of QUALCOMM Incorporated in the United States and may be registered in other countries. All other trademarks are the property of their respective owners. Specifications are subject to change without notice. Qualcomm endeavors to ensure that the information in this document is correct and fairly stated, but Qualcomm is not liable for any errors or omissions. Published information may not be up to date, and it is important to confirm current status with Qualcomm. This technical data may be subject to U.S. and international export, re-export or transfer (export) laws. Diversion contrary to U.S. and international law is strictly prohibited. 80-J7615-1 Rev. A September 2010 DRAFT 80-J7615-1 Rev. AMAY CONTAIN U.S. EXPORT CONTROLLED INFORMATIONiii Contents Chapter 1 How the Trailer Tracks Service Works Introduction .......................................................................................................1-1 Trailer Tracks Service Network Description ......................................................1-2 What is the Trailer Tracks Service? ..................................................................1-3 The GPS and Terrestrial Wireless Network Systems .................................1-3 TT210 Components ....................................................................................1-4 Chapter 2 TT210 System Component Overview TT210 Component Introduction ........................................................................2-1 The Installation Hardware .................................................................................2-2 How the Components and Cables Interconnect ...............................................2-3 TT210 Terminal ..........................................................................................2-4 TT210 Terminal Battery Pack .....................................................................2-4 TT210 Power/Accessory Cable - Optional .................................................2-6 TT210 Cargo Sensor ..................................................................................2-9 TT210 Door Sensor ..................................................................................2-10 Auxiliary Sensor .......................................................................................2-10 Chapter 3 General Wiring Guidelines Making Electrical Connections ..........................................................................3-2 Approved Qualcomm Electrical Connectors ...............................................3-2 Wire Stripping .............................................................................................3-2 Butt Splicing ...............................................................................................3-3 Crimping .....................................................................................................3-4 Ring Terminals ...........................................................................................3-9 Grounding Guidelines .......................................................................................3-9 Cable Basics ...................................................................................................3-10 Routing and Protecting Cables .......................................................................3-10 Cable Routing Guidelines .........................................................................3-10 Storing Excess Cabling ............................................................................3-10 Using Protective Sheathing ......................................................................3-10 DRAFT ivMAY CONTAIN U.S. EXPORT CONTROLLED INFORMATION80-J7615-1 Rev. A Chapter 4 TT210 Installation Planning Introduction ...................................................................................................... 4-1 General Installation Information ....................................................................... 4-2 Verify the Trailer/Container Is in Good Condition ...................................... 4-2 Survey the Trailer/Container ...................................................................... 4-2 Terminal and Cables .................................................................................. 4-2 Consult with the Customer Prior to Any Installation ................................... 4-2 What to Consider Before Installing the System ......................................... 4-3 Installation Guidelines ...................................................................................... 4-3 Safety, Reliability, and Accessibility ........................................................... 4-3 Typical TT210 Installation Sequence ............................................................... 4-3 Tools and Supplies Needed for Installation ...................................................... 4-4 Chapter 5 Installing the TT210 Terminal on Dry Vans Introduction ...................................................................................................... 5-1 Terminal with 7-way Power .............................................................................. 5-2 Overview .................................................................................................... 5-2 Planning for Optional Sensors ................................................................... 5-2 Installation .................................................................................................. 5-3 Chapter 6 Installing the TT210 Terminal on Plate Nose Trailers Introduction ..............................................................................…

Text truncated - open the document above for the full version.

Users Manual

Installing the Cargo Sensor Using 3" or 1" Pan MountInstalling the Cargo Sensor 11 -4 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION80-J7615-1 Rev. A 1.Position a portable scaffold in front of the trailer nose where the cargo sensor will be installed. 2.Carefully ascend the scaffolding. Note Mount on the bay next to the TT210 terminal which will be on the driver’s side (left of center) no closer than 18" to the trailer sidewall. 3.Locate the mounting position of the cargo sensor. It should be centered in the bay next to the TT210 terminal which will be on the driver’s side (left of center). 04AAA_131 DRAFT 80-J7615-1 Rev. AMAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION11 -5 Installing the Cargo SensorInstalling the Cargo Sensor Using 3" or 1" Pan Mount 4.Place the cargo mount installation template as high up as practical between the vertical support rails. 5.Secure the template with two self-drilling screws through holes in the handle. 6.Using the template as a guide, drill the 18 stud holes using a 3/8" drill. 7.Trace the inside of the template using a felt-tip pen. 8.Drill 1/4” pilot holes in the four inside corners of the template. 10AAA_02 10AAA_04 Trace the inside of the template DRAFT Installing the Cargo Sensor Using 3" or 1" Pan MountInstalling the Cargo Sensor 11 -6 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION80-J7615-1 Rev. A 9.Remove the self-drilling screws and the template. 10.Drill a 7/8" hole on each of the four corners of the template using the pilot holes as a guide. 11.Completely cut out the marked area for the cargo sensor with a cutting tool, being careful not to drop the newly cut panel inside or outside of the trailer. Avoid sharp edges and debur if necessary. 12.Verify the trailer skin around the cutout area (inside and outside the trailer) is free of dirt and grime. If not, clean the surface with alcohol. 13.Drill four holes in the plywood liner that are lined up with the four 7/8" holes in the trailer skin. Mark and cut out the plywood in the area inside the four holes. The plywood cutout must extend a minimum of 6" below the lower edge of the cargo sensor cones at the bottom. Note If the 3" pan is used with a trailer having a greater than 2” spacing, increase plywood cutout 3" lower (9" below cargo sensor). Scribed Line Drill four 7/8" corner holes DRAFT 80-J7615-1 Rev. AMAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION11 -7 Installing the Cargo SensorInstalling the Cargo Sensor Using 3" or 1" Pan Mount 14.Remove the protective plastic cover from the double-sided adhesive tape on each of the four prefabricated stud plates. 15.Each of the four stud plates are installed on the inside of the trailer skin. Position each to line up with the stud holes that were just drilled. Push the studs through the holes and press firmly to adhere the stud plate to the inside of the trailer skin. 16.There is a gasket supplied with the mount. With the studs now protruding through the outside of the trailer skin, place the gasket over the studs and against the trailer skin. Gasket is one time use only. Replace the gasket each time the pan is removed and reinstalled 04AAA _135A Stud Plate Stud Plate Stud Plate Stud Plate Double-sided Tape Double-sided Tape 04AAA_137C DRAFT Installing the Cargo Sensor Using 3" or 1" Pan MountInstalling the Cargo Sensor 11 -8 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION80-J7615-1 Rev. A 17.Mount the cargo sensor to the 3" or 1"cargo sensor pan mount using four lock nuts and four flat washers. Tighten just until snug and torque to 20 inch-pounds +/- 5 inch- pounds. 18.For a container or plate nose: a.Place the grommet around the cargo sensor connector and down the cable about 9". b.Route the cable through the 7/8" hole in the bottom of the 3" pan and connect to the sensor. c.Fit the grommet securely into the 7/8" hole and adjust the cable length so it does not protrude into the area in front of the cargo sensor. 19.For a dry van: a.Reach into the hole and grab the cargo sensor cable. b.Connect the cable to the cargo sensor. c.Secure the cargo sensor cable so that it does not fall into the area in front of the cargo sensor. 20.Position the mount into place, lining it up with the studs. Press firmly to secure over the gasket. 21.Fasten supplied nuts over each stud and tighten to spec 80 inch-pounds +/- 9 inch- pounds. 10AAA_010A DRAFT 80-J7615-1 Rev. AMAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION11 -9 Installing the Cargo SensorInstalling the Cargo Sensor Using a Flat Internal Mount Installing the Cargo Sensor Using a Flat Internal Mount Note Mount on the bay next to the TT210 terminal which will be on the driver’s side (left of center) no closer than 18" to the trailer sidewall. 1.Locate the mounting position of the cargo sensor. It should be centered in the bay next to the TT210 terminal which will be on the driver’s side (left of center). 2.Measure and cut a hole approximately 9 1/2” x 12 “ in the liner that allows the cargo sensor an unobstructed view of the inside of the trailer. Container Plate Nose Plate Nose and Containers Use 3" Pan External Wiring Dry Van Use 3" or 1" Pan Internal Wiring DRAFT Installing the Cargo Sensor Using a Flat Internal MountInstalling the Cargo Sensor 11 -10 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION80-J7615-1 Rev. A 3.Center the cargo sensor side to side in the hole. The bottom edge of the plywood hole should be a minimum of 6” below the lower lip of the cargo sensor cone. 4.From the inside of the trailer, while holding the mount in place, drill four 3/16” rivet holes. It may be possible to tape the mount temporarily to hold it in place for drilling and riveting. 5.This step will require two people to perform. While holding the mount in place, install the provided rivets from the outside of the trailer and rivet mount to the trailer skin. Trailer Exterior Cargo Sensor Mount Riveted to Traile…

Text truncated - open the document above for the full version.

Cover Letter(s)

Request for Confidentiality January 19, 2011 Timco Engineering, Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 USA RE: Certification Application FCC ID: J9CTT210Q1 Please be advised that the following exhibits are be held confidential on behalf of Qualcomm Inc.:  Schematics  Block Diagram  Theory of Operation The application contains technical information that Qualcomm Inc. deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Sincerely, Fang Han Senior Staff Regulatory Engineer Qualcomm Inc.

Cover Letter(s)

Special Power of Attorney I, Paul Guckian of Qualcomm Incorporated hereby appoint Fang Han of Qualcomm Incorporated to represent me, in fact to act in my capacity to do any and all of the following: Signed on my behalf agency, 731 form, anti-drug and confidentiality cover letters, and apply to FCC and Industries Canada for the product with the FCC ID: J9CTT210Q1 and IC number 273A-TT210Q1. The rights, powers, and authority in fact to exercise any and all of the rights and powers herein granted shall commence and be in full force and effect on January 10 th , 2011, and shall remain in full force and effect until February 1 st 2011 or unless specifically extended or rescinded earlier by either party. Dated January 10 th , 2011 Paul Guckian Signature: Company Name: Qualcomm Incorporated Country of: USA NOTICE The information in this document is designed to provide an outline that you can follow when formulating business or personal plans. Due to the variances of many local, city, county and state laws, we recommend that you seek professional legal counseling before entering into any contract or agreement.

External Photos

ID Label/Location Info

Regulator label

ID Label/Location Info

Regulator label

Internal Photos

! ! !

Test Report

2011-01-12 Page 1 of 43 TEST REPORT Test report no.: 1-2286-02-02/10-B Testing laboratory Applicant CETECOM ICT Services GmbH Untertuerkheimer Straße 6 – 10 66117 Saarbruecken / Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: http://www.cetecom.com e-mail: [email protected] Accredited test laboratory: The test laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 DAR registration number: DGA-PL-176/94-D1 Area of Testing: Radio/Satellite Communications Qualcomm Incorporated 5775 Morehouse Drive 92121-1714 San Diego - California / United States Phone: 858-651-3853 Fax: -/- Contact: Mr. Anthony Richards e-mail: [email protected] Phone: 858-651-3853 Manufacturer TES Electronic Solutions 50 rue du Président Sadate 29337 Quimper / France Test standard/s 47 CFR Part 22 Title 47 of the Code of Federal Regulations; Chapter I-Federal Communications Commission subchapter B - common carrier services, Part 22-Public mobile services 47 CFR Part 24 Title 47 of the Code of Federal Regulations; Chapter I-Federal Communications Commission subchapter B - common carrier services, Part 24-Personal communications services RSS - 132 Issue 2 Spectrum Management and Telecommunications Policy - Radio Standards Specifications Cellular Telephones Employing New Technologies Operating in the Bands 824-849 MHz and 869-894 MHz For further applied test standards please refer to section 3 of this test report. Test item Kind of test item: M2M tracking system Model name: TT210 FCC ID: J9CTT210Q1 IC: 2723A-TT210Q1 Frequency [MHz]: 824.2 – 848.8 MHz, 1850.2 – 1909.8 MHz Power supply: 12 V DC by Battery and Power Supply Temperature range: -/- °C to -/- °C This test report is electronically signed and valid without handwriting signature. For verification of the electronical signatures, the public keys can be requested at the testing laboratory. Test performed: Test report authorised: Jakob Reschke Stefan Bös Test report no.: 1-2286-02-02/10-B 2011-01-12 Page 2 of 43 1 Table of contents 1 Table of contents............................................................................................................................................2 2 General information .......................................................................................................................................3 2.1 Notes.....................................................................................................................................................3 2.2 Application details...............................................................................................................................3 3 Test standard/s ...............................................................................................................................................3 4 Test environment............................................................................................................................................4 5 Test item ..........................................................................................................................................................5 6 Test laboratories sub-contracted .................................................................................................................5 7 Summary of measurement results ...............................................................................................................6 7.1 GSM 850................................................................................................................................................6 7.2 PCS 1900 ..............................................................................................................................................6 7.3 Receiver................................................................................................................................................7 8 RF measurement testing................................................................................................................................8 8.1 Description of test setup ....................................................................................................................8 8.1.1 Radiated measurements.............................................................................................................8 8.1.2 Conducted measurements..........................................................................................................9 8.2 RSP100 test report cover sheet / performance test data ..............................................................10 8.3 MPE Calculation ................................................................................................................................11 8.4 Results GSM 850 ...............................................................................................................................12 8.4.1 RF output power .......................................................................................................................12 8.4.2 Frequency stability....................................................................................................................14 8.4.3 Spurious emissions radiated ....................................................................................................15 8.4.4 Spurious emissions conducted .................................................................................................19 8.4.5 Block edge compliance.............................................................................................................19 8.4.6 Occupied bandwidth .................................................................................................................19 8.5 Results PCS 1900 ..............................................................................................................................20 8.5.1 RF output power ....................................................................…

Text truncated - open the document above for the full version.

Test Report

Z.I. Angers - Beaucouzé - 15, rue de la Claie - 49070 BEAUCOUZE - Siret : 344 545 645 00055 Tél. : 02 41 73 26 27 - Fax : 02 41 73 26 40 - E-mail : [email protected] - URL : www.emitech.fr Siège Social : 3, rue des Coudriers - CAP 78 - ZA de l’Observatoire - 78180 MONTIGNY LE BX S.A. au capital de 1 560 000 € - R.C.S. VERSAILLES 344 545 645 - APE 7112B R051-24-10-103051-5/A Ed. 1 “This report cancels and replaces the test report N°R051-24-10-103051-5/A Edition 0” RADIO test report according to standard: FCC Part 15 Equipment under test: M2M tracking system CV90-J8100 Co-location measurements Company: TES Electronic Solutions DISTRIBUTION: Mr LE TORC’H Company: TES Electronic Solutions Number of pages: 13 including 2 annexes Technical Verification Ed. Date ModifiedWritten by Quality Approval pages Name Visa Name Visa 1 27-Jan-11 2 L. BERTHAUD Duplication of this document is only permitted for an integral photographic facsimile. It includes the number of pages referenced here above. This document is the result of testing a specimen or a sample of the product submitted. It does not imply an assessment of the conformity of the whole manufactured products of the tested sample. R051-24-10-103051-5/A Ed. 1 PAGE 2 R051-24-10-103051-5-A-SG Ed.1 PRODUCT: M2M tracking system CV90-J8100 Reference / model : CV90-J8100 Trade mark : Qualcomm Incorporated Serial number: not communicated MANUFACTURER: TES Electronic Solutions 1 COMPANY SUBMITTING THE PRODUCT: Company : Qualcomm Incorporated Address : 5775 Morehouse Drive San Diego, CA 92121, 1714 USA Responsible : Mr RICHARDS TECHNICAL SUPPORT: Company : TES Electronic Solutions Address: 50 place du Président Sadate 29337 QUIMPER Cedex FRANCE Responsible : Mr LE TORC’H DATE(S) OF TEST: 18 December 2010 TESTING LOCATION: EMITECH ATLANTIQUE laboratory at ANGERS (49) FRANCE EMITECH ATLANTIQUE open area test site in LA POUEZE (49) FRANCE FCC Registration Number: 101696/FRN: 0006 6490 08 TESTED BY: M. DUMESNIL R051-24-10-103051-5/A Ed. 1 PAGE 3 R051-24-10-103051-5-A-SG Ed.1 CONTENTS TITLE PAGE 1. INTRODUCTION.......................................................................................................................... 4 2. PRODUCT DESCRIPTION ......................................................................................................... 4 3. NORMATIVE REFERENCE....................................................................................................... 4 4. TEST METHODOLOGY .............................................................................................................4 5. TESTS RESULTS SUMMARY.................................................................................................... 5 5.1 unintentional radiator (subpart B) .............................................................................................. 5 5.2 intentional radiator (subpart C) .................................................................................................. 5 6. RADIATED EMISSION LIMITS; GENERAL REQUIREMENTS........................................ 6 ANNEX 1: PHOTOS OF THE EQUIPMENT UNDER TEST ..................................................... 8 ANNEX 2: TEST SET UP AND OPEN AREA TEST SITE ....................................................... 12 R051-24-10-103051-5/A Ed. 1 PAGE 4 R051-24-10-103051-5-A-SG Ed.1 1. INTRODUCTION This report presents the results of radio test carried out on the following equipment: M2M tracking system CV90-J8100 – Co-location measurements , in accordance with normative reference. 2. PRODUCT DESCRIPTION Class: B (residential environment) Utilization: tracking unit with Bluetooth and GSM functions Power source: 12 Vd.c Power level, frequency range and channels characteristics are not user adjustable. The details pictures of the product and the circuit boards are joined with this file. 3. NORMATIVE REFERENCE The standards and testing methods related throughout this report are those listed below. They are applied on the whole test report even though the extensions (version, date and amendment) are not repeated. FCC Part 15 (2009) Radio Frequency Devices ANSI C63.4 (2003) Methods of Measurement of Radio-Noise Emissions from Low- voltage Electrical and Electronics Equipment in the range of 9 kHz to 40 GHz. 4. TEST METHODOLOGY Radio performance tests procedures given in part 15: Subpart B –Unintentional Radiators Paragraph 107: conducted limits Paragraph 109: radiated emission limits Paragraph 111: antenna power conduction limits for receivers Subpart C – Intentional Radiators Paragraph 203: antenna requirement Paragraph 207: conducted limits Paragraph 209: radiated emission limits; general requirements R051-24-10-103051-5/A Ed. 1 PAGE 5 R051-24-10-103051-5-A-SG Ed.1 5. TESTS RESULTS SUMMARY 5.1 unintentional radiator (subpart B) Test Description of test Respected criteria? Comment procedure Yes No NAp NAs FCC Part 15.107 CONDUCTED LIMITS X FCC Part 15.109 RADIATED EMISSION LIMITS X FCC Part 15.111 ANTENNA POWER CONDUCTED LIMITS FOR RECEIVER X NAp: Not Applicable NAs: Not Asked 5.2 intentional radiator (subpart C) Test Description of test Criteria respected ? Comment procedure YesNo NAp NAs FCC Part 15.203 ANTENNA REQUIREMENTS X Note 1 FCC Part 15.207 CONDUCTED LIMITS X FCC Part 15.209 RADIATED EMISSION LIMITS; GENERAL REQUIREMENTS X Note 2 NAp: Not Applicable NAs: Not Asked Note 1: Dedicated antenna. Professionally installed equipment. Note2: Unwanted emissions levels are all below the fundamental emission field strength level. Measurements are realized with Bluetooth and GSM modules transmitting simultaneously. Conclusion: The sample of M2M tracking system CV90-J8100 submitted to the tests complies with the regulations of the standard FCC Part 15 in accordance with the limits or criteria defined in this report. R051-24-10-103051-5/A Ed. 1 PAGE 6 R051-24-10-103051-5-A-SG Ed.1 6. RADIATED EMISSION LIMITS; GENERAL REQUIREMENTS Standard: FCC Part 15 Test procedure: paragraph 209 Test …

Text truncated - open the document above for the full version.

Test Report

Text truncated - open the document above for the full version.

Contact Information

Applicant

Paul Guckian(Vice President, Regulatory Engineering)

[email protected]858-651-1547Fax: 858-651-1547

Test Firm

EMITECH AtlantiqueEric COEURET

[email protected]33-1-30-575555Fax: +33-1-30-579605

Technical Specifications

#	Rule Parts	Frequency Range	Power Output
1	15C	2.40 GHz - 2.48 GHz	3.00 mW

Confidentiality

Long Term

Grant Notes

Power listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures or as documented in this filing with the following module already approved under FCCID: RI7GE863G. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements.