J9CUNDP-1UNDP-1 PCI Express Mini Card

UNDP-1 Universal Notebook Data Platform User Guide 80-VF329-3 Rev. A November 1, 2007 Submit technical questions at: https://support.cdmatech.com Restricted Distribution. Not to be distributed to anyone who is not an employee of either QUALCOMM or a subsidiary of QUALCOMM without the express approval of QUALCOMM's Configuration Management. Not to be used, copied, reproduced in whole or in part, nor its contents revealed in any manner to others without the express written permission of QUALCOMM Incorporated. QUALCOMM is a registered trademark of QUALCOMM Incorporated in the United States and may be registered in other countries. Other product and brand names may be trademarks or registered trademarks of their respective owners. CDMA2000 is a registered certification mark of the Telecommunications Industry Association, used under license. ARM is a registered trademark of ARM Limited. QDSP is a registered trademark of QUALCOMM Incorporated in the United States and other countries. This technical data may be subject to U.S. export, re-export, or transfer ("export") laws. Diversion contrary to U.S. law prohibited. QUALCOMM Incorporated 5775 Morehouse Drive San Diego, CA 92121-1714 U.S.A. Copyright © 2007 QUALCOMM Incorporated. All rights reserved. QUALCOMM Confidential and Proprietary 80-VF329-3 Rev. A2QUALCOMM Confidential and Proprietary MAY CONTAIN U.S. EXPORT CONTROLLED INFORMATION 1Introduction 1.1Documentation overview ....................................................................................... 6 1.2Application description .......................................................................................... 7 1.3Terms and acronyms............................................................................................. 11 2External Connections 3DC Power and UNDP Operating Modes 3.1DC power source .................................................................................................. 15 3.2DC power states.................................................................................................... 16 3.3UNDP operating modes........................................................................................ 16 3.4Electrostatic discharge protection ........................................................................ 17 4RF Integration 4.1RF operating frequencies...................................................................................... 18 4.2RF connections ..................................................................................................... 18 4.3Ground connections.............................................................................................. 19 4.4Shielding and interference.................................................................................... 19 4.5Antenna considerations ........................................................................................ 21 5Platform Communications 6Standards and Regulatory Compliance 6.1Standards and certification ................................................................................... 24 6.2Regulatory information ........................................................................................ 25 6.2.1Safety warnings.................................................................................... 25 6.2.2North American compliance ................................................................ 25 Contents 80-VF329-3 Rev. A3QUALCOMM Confidential and Proprietary MAY CONTAIN U.S. EXPORT CONTROLLED INFORMATION UNDP-1 Universal Notebook Data Platform User GuideContents Figures Figure 1-1 UNDP-1 product deliverables.......................................................................... 8 Figure 1-2 Example application functional block diagram ............................................... 9 Figure 2-1 External connections...................................................................................... 14 Figure 3-1 DC power connections................................................................................... 15 Figure 4-1 UNDP shields (highlighted in pink) .............................................................. 20 Figure 5-1 UNDP-1 communication interfaces............................................................... 22 80-VF329-3 Rev. A4QUALCOMM Confidential and Proprietary MAY CONTAIN U.S. EXPORT CONTROLLED INFORMATION UNDP-1 Universal Notebook Data Platform User GuideContents Tables Table 1-1UNDP-1 documentation .................................................................................. 6 Table 1-2Reference documents ....................................................................................... 7 Table 1-3Terms and Acronyms ..................................................................................... 11 Table 2-1PCI Express Mini Card connector pin assignments....................................... 13 Table 3-1UNDP-1 DC power states.............................................................................. 16 Table 3-2UNDP-1 operating modes and throughput rates............................................ 16 Table 4-1RF operating frequencies ............................................................................... 18 Table 5-1LED communications .................................................................................... 23 80-VF329-3 Rev. A5QUALCOMM Confidential and Proprietary MAY CONTAIN U.S. EXPORT CONTROLLED INFORMATION Revision history RevisionDateDescription ANovember 2007Initial release 80-VF329-3 Rev. A6QUALCOMM Confidential and Proprietary MAY CONTAIN U.S. EXPORT CONTROLLED INFORMATION 1Introduction 1.1Documentation overview The UNDP-1 Universal Notebook Data Platform is a PCI Express™ Mini Card that enables notebook computer wireless data connectivity. This datacard solution delivers WWAN connectivity for the CDMA2000® 1x, 1x EV-DO, UMTS (HSDPA and HSUPA), and GSM/GPRS/EDGE™ protocols, plus GPS position location, in a single package. The complete UNDP-1 soluti…

Text truncated - open the document above for the full version.

UNDP-1 Universal Notebook Data Platform User Guide 80-VF329-3 Rev. C December 20, 2007 Submit technical questions at: https://support.cdmatech.com Restricted Distribution. Not to be distributed to anyone who is not an employee of either QUALCOMM or a subsidiary of QUALCOMM without the express approval of QUALCOMM's Configuration Management. Not to be used, copied, reproduced in whole or in part, nor its contents revealed in any manner to others without the express written permission of QUALCOMM Incorporated. QUALCOMM is a registered trademark of QUALCOMM Incorporated in the United States and may be registered in other countries. Other product and brand names may be trademarks or registered trademarks of their respective owners. CDMA2000 is a registered certification mark of the Telecommunications Industry Association, used under license. ARM is a registered trademark of ARM Limited. QDSP is a registered trademark of QUALCOMM Incorporated in the United States and other countries. This technical data may be subject to U.S. export, re-export, or transfer ("export") laws. Diversion contrary to U.S. law prohibited. QUALCOMM Incorporated 5775 Morehouse Drive San Diego, CA 92121-1714 U.S.A. Copyright © 2007 QUALCOMM Incorporated. All rights reserved. QUALCOMM Confidential and Proprietary 80-VF329-3 Rev. C2QUALCOMM Confidential and Proprietary MAY CONTAIN U.S. EXPORT CONTROLLED INFORMATION 1Introduction 1.1Documentation overview........................................................................................ 6 1.2Application description .......................................................................................... 8 1.3Terms and acronyms............................................................................................. 12 2External Connections 3DC Power and UNDP Operating Modes 3.1DC power source .................................................................................................. 16 3.2DC power states.................................................................................................... 17 3.3UNDP operating modes........................................................................................ 17 3.4Electrostatic discharge protection ........................................................................ 18 4RF Integration 4.1RF operating frequencies...................................................................................... 19 4.2RF connections ..................................................................................................... 20 4.3Ground connections.............................................................................................. 20 4.4Shielding and interference.................................................................................... 21 4.5Antenna considerations ........................................................................................ 22 5Platform Communications 6Standards and Regulatory Compliance 6.1Standards and certification ................................................................................... 25 6.2Regulatory information ........................................................................................ 26 6.2.1Safety warnings.................................................................................... 26 6.2.2North American compliance ................................................................ 27 6.2.3EU compliance ..................................................................................... 28 Contents 80-VF329-3 Rev. C3QUALCOMM Confidential and Proprietary MAY CONTAIN U.S. EXPORT CONTROLLED INFORMATION UNDP-1 Universal Notebook Data Platform User GuideContents Figures Figure 1-1 UNDP-1 product deliverables.......................................................................... 9 Figure 1-2 Example application functional block diagram ............................................. 10 Figure 2-1 External connections...................................................................................... 15 Figure 3-1 DC power connections................................................................................... 16 Figure 4-1 UNDP shields ................................................................................................ 21 Figure 5-1 UNDP-1 communication interfaces............................................................... 23 80-VF329-3 Rev. C4QUALCOMM Confidential and Proprietary MAY CONTAIN U.S. EXPORT CONTROLLED INFORMATION UNDP-1 Universal Notebook Data Platform User GuideContents Tables Table 1-1UNDP-1 documentation .................................................................................. 6 Table 1-2Reference documents ....................................................................................... 7 Table 1-3Terms and Acronyms ..................................................................................... 12 Table 2-1PCI Express Mini Card connector pin assignments....................................... 14 Table 3-1UNDP-1 DC power states .............................................................................. 17 Table 3-2UNDP-1 operating modes and throughput rates............................................ 17 Table 4-1RF operating frequencies ............................................................................... 19 Table 5-1LED communications .................................................................................... 24 80-VF329-3 Rev. C5QUALCOMM Confidential and Proprietary MAY CONTAIN U.S. EXPORT CONTROLLED INFORMATION Revision history RevisionDateDescription ANovember 2007Initial release BNovember 2007 Added label information in compliance details (Section 6.2.2) CDecember 2007 Updated Section 6.2.2 Added Section 6.2.3 80-VF329-3 Rev. C6QUALCOMM Confidential and Proprietary MAY CONTAIN U.S. EXPORT CONTROLLED INFORMATION 1Introduction 1.1Documentation overview The UNDP-1 Universal Notebook Data Platform is a PCI Express™ Mini Card that enables no…

Text truncated - open the document above for the full version.

FCC ID: J9CUNDP-1 Qualcomm Incorporated 1 November 2, 2007 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Re: Application for Cellular and PCS Transceiver Type Acceptance Qualcomm Incorporated herein submits the Application for Equipment Authorization (FCC Form 731) and Exhibits for Type Acceptance of a Cellular & PCS Transceiver, FCC ID: J9CUNDP-1. Applicant: Qualcomm Incorporated 5775 Morehouse Drive San Diego, CA 92121 Manufacturer: Initial product by Qualcomm Incorporated 5775 Morehouse Drive San Diego, CA 92121 Second Party Volume Manufacturer TBD The UNDP-1 product is a WWAN PCI Express TM Mini Card form factor. This data card solution delivers WWAN connectivity for notebook computers using CDMA2000 1x/1x- EVDO, WCDMA/HSPA and GSM/GPRS/EDGE protocols, plus GPS position location, in a single package. The complete UNDP-1 solution includes all hardware and software necessary for embedded wireless connectivity in notebook PCs. All necessary information is provided in Exhibits 1 through 11. Please contact me at Tel: (858) 658-5346 or Email: [email protected] , if there are any questions or additional information needed. Sincerely, Lin Lu Lin Lu Engineer, Senior Staff Qualcomm Incorporated

FCC ID: J9CUNDP-1 Qualcomm Incorporated 1 November 2, 2007 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Re: Request of Confidentiality for FCC ID: J9CUNDP-1 To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), Qualcomm Incorporated hereby requests confidential and treatment of information accompanying this Application as outlined in table 1. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. Furthermore, pursuant to Public Notice DA 04-1705 in order to comply with the marketing regulations in CFR 47 §2.803 and the importation rules in CFR 47 §2.1204, we request the following exhibits listed in table 1 be withheld from public viewing for a short limited time of 45 days from the date of the Grant of Equipment Authorization, due to the sensitive business information. The requested Confidential and Temporary Confidential exhibits are listed in table 1 below: Table 1. Confidential and Short-Term Confidential Exhibit Description 1 UNDP-1 Operation Descriptions & Documentation 5 UNDP-1 Schematics 6 UNDP-1 Parts List & Tune-up procedure Confidential 7 UNDP-1 Block diagrams 2 UNDP-1 Part 22&24 Conducted Test Report 3 UNDP-1 Radiated Test Report 4 MPE Evaluation 8 FCC Label Information 9 UNDP-1 Internal Photos 10 UNDP-1 External Photos 11 UNDP-1 User’s Guide Short-Term Confidential Grant of Equipment Authorization Certification The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this Application. Sincerely, Lin Lu Lin Lu Engineer, Senior Staff Qualcomm Incorporated

FCC: J9CUNDP-1 Qualcomm Incorporated 1 This document was generated in response to a request for additional technical information by Steven Dayhoff (FCC) in regards to the FCC approval of the UNDP-1. The information included in related to the specific topics discussed in the following email received by Lin Lu on Dec. 20, 2007: FCC: J9CUNDP-1 Qualcomm Incorporated 2 Question #1: User manual mentions “Additional suggestions are provided in Antenna Design Guidelines for Laptop and Notebook Computers (80-H2929-1)”. Please submit these installation instructions Qualcomm: The requested document has been uploaded with this correspondence. This document is Qualcomm proprietary material. So the confidentiality request letter has been updated and submitted to include the requested document. Question #2: fyi-only Question #3: fyi Question #4: Besides MPE, filing must document antenna configurations in compliance with service-rule ERP/EIRP limits, if any. MPE exhibit has 873 mW with 4 dBi antenna = 2.2 W EIRP; per 24.232 (c) max EIRP is 2 W - please revise MPE and other parts of filling where appropriate, e.g. user manual etc. Qualcomm: The MPE evaluation report and User’s Guide have been revised as the maximum antenna gain in PCS band must not exceed 3.5 dBi to ensure the configuration in compliance with the requirements specified in FCC CFR 47 §1.1310, 2.1091as well as 24.232(c). The relevant documents have been updated with this correspondence.

FCC ID: J9CUNDP-1 Qualcomm Incorporated 1 November 20, 2007 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Re: Request of Confidentiality for FCC ID: J9CUNDP-1 To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), Qualcomm Incorporated hereby requests confidential and treatment of information accompanying this Application as outlined in table 1. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. Furthermore, pursuant to Public Notice DA 04-1705 in order to comply with the marketing regulations in CFR 47 §2.803 and the importation rules in CFR 47 §2.1204, we request the following exhibits listed in table 1 be withheld from public viewing for a short limited time of 45 days from the date of the Grant of Equipment Authorization, due to the sensitive business information. The requested Confidential and Temporary Confidential exhibits are listed in table 1 below: Table 1. Confidential and Short-Term Confidential Exhibit Description 1 UNDP-1 Operation Descriptions & Documentation 5 UNDP-1 Schematics 6 UNDP-1 Parts List & Tune-up procedure 7 UNDP-1 Block diagrams Confidential 12 Antenna Design Guidelines for Laptop and Notebook Computers 2 UNDP-1 Part 22&24 Conducted Test Report 3 UNDP-1 Radiated Test Report 4 MPE Evaluation 8 FCC Label Information 9 UNDP-1 Internal Photos 10 UNDP-1 External Photos 11 UNDP-1 User’s Guide Cover letters Short-Term Confidential Grant of Equipment Authorization Certification The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this Application. Sincerely, Lin Lu Lin Lu Engineer, Senior Staff Qualcomm Incorporated

FCC: J9CUNDP-1 Qualcomm Incorporated 1 This document was generated in response to FCC Correspondence # 34608, a request for additional technical information by Steven Dayhoff (FCC) in regards to the FCC approval of the UNDP-1. The information included in related to the specific topics discussed in the following email received by Lin Lu on Jan. 10, 2008: ------------------- Question #1: Submit the antenna design guidelines and request permanent confidentiality on this document. Qualcomm: The requested document of antenna design guidelines (80-H2929-1) was submitted on Dec 21 2007 via FCC OET E-filing web site “Add Attachments” alone with response to the Info Request #34561. The updated confidentiality request letter which covers the confidentiality request on additional documents (including the antenna design guidelines) was also submitted on Dec 21 2007. The OET Exhibits Summary List attached below shows both requested documents were successfully uploaded in FCC E- filing database. Please let me know if the info needs to be re-submitted. FCC: J9CUNDP-1 Qualcomm Incorporated 2

FCC: J9CUNDP-1 Qualcomm Incorporated 1 This document was generated in response to FCC Correspondence # 34671, a request for additional technical information by Tim Harrington (FCC) in regards to the FCC approval of the UNDP-1. The information included in related to the specific topics discussed in the following email received by Lin Lu on Jan. 17, 2008: ------------------- Question #1: Exhibit types allowed for limited confidentiality per DA-04-1705 do not include Test Report nor RF Exposure info – please submit revised confidentiality request letter, and adjusted exhibits if appropriate. Note also that application cover letters and Certification Grant cannot be held confidential. Qualcomm: The confidentiality request letter has been updated and submitted via the Internet at www.fcc.gov , e-filing, OET Equipment Authorization Electronic Filing, Submit Correspondence. The following documents have been removed from the short term confidentiality request list. 1) Exhibit 2 UNDP-1 Part 22&24 Conducted Test Report 2) Exhibit 3 UNDP-1 Radiated Test Report 3) Exhibit 4 MPE Evaluation 4) Cover letter 5) Grant of Equipment Authorization Certification

FCC ID: J9CUNDP-1 Qualcomm Incorporated 1 November 20, 2007 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Re: Request of Confidentiality for FCC ID: J9CUNDP-1 To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), Qualcomm Incorporated hereby requests confidential and treatment of information accompanying this Application as outlined in table 1. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. Furthermore, pursuant to Public Notice DA 04-1705 in order to comply with the marketing regulations in CFR 47 §2.803 and the importation rules in CFR 47 §2.1204, we request the following exhibits listed in table 1 be withheld from public viewing for a short limited time of 45 days from the date of the Grant of Equipment Authorization, due to the sensitive business information. The requested Confidential and Temporary Confidential exhibits are listed in table 1 below: Table 1. Confidential and Short-Term Confidential Exhibit Description 1 UNDP-1 Operation Descriptions & Documentation 5 UNDP-1 Schematics 6 UNDP-1 Parts List & Tune-up procedure 7 UNDP-1 Block diagrams Confidential 12 Antenna Design Guidelines for Laptop and Notebook Computers 8 FCC Label Information 9 UNDP-1 Internal Photos 10 UNDP-1 External Photos Short-Term Confidential 11 UNDP-1 User’s Guide The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this Application. Sincerely, Lin Lu Lin Lu Engineer, Senior Staff Qualcomm Incorporated

FCC ID: J9CUNDP-1 Qualcomm Incorporated 1 November 20, 2007 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Re: Request of Confidentiality for FCC ID: J9CUNDP-1 To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), Qualcomm Incorporated hereby requests confidential and treatment of information accompanying this Application as outlined in table 1. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. Furthermore, pursuant to Public Notice DA 04-1705 in order to comply with the marketing regulations in CFR 47 §2.803 and the importation rules in CFR 47 §2.1204, we request the following exhibits listed in table 1 be withheld from public viewing for a short limited time of 45 days from the date of the Grant of Equipment Authorization, due to the sensitive business information. The requested Confidential and Temporary Confidential exhibits are listed in table 1 below: Table 1. Confidential and Short-Term Confidential Exhibit Description 1 UNDP-1 Operation Descriptions & Documentation 5 UNDP-1 Schematics 6 UNDP-1 Parts List & Tune-up procedure 7 UNDP-1 Block diagrams Confidential 12 Antenna Design Guidelines for Laptop and Notebook Computers 8_2 UNDP-1 FCC Label Location 9 UNDP-1 Internal Photos 10 UNDP-1 External Photos Short-Term Confidential 11 UNDP-1 User’s Guide The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this Application. Sincerely, Lin Lu Lin Lu Engineer, Senior Staff Qualcomm Incorporated

FCC ID: J9CUNDP-1 1 1 Exhibit 10 External Photos Figure 1 JTAG side FCC ID: J9CUNDP-1 2 2 Figure 2 RF Connector side

FCC ID: J9CUNDP-1 Exhibit 8_2: FCC Label Information 1. Label Location FCC label location

FCC ID: J9CUNDP-1 Exhibit 8_1: FCC Label Information 1. Label Format Note the dimensions are in mm.

FCC ID: J9CUNDP-1 2 1 Exhibit 9: Internal Photos Figure 1 Digital and Power Management Compartments FCC ID: J9CUNDP-1 2 2 Figure 2 Tx and Rx Compartments

FCC ID: J9CUNDP-1 MPE Analysis QUALCOMM Proprietary 1 Universal Notebook Data Platform (UNDP) MPE Evaluation Report FCC Part 22 & 24 Certification FCC ID: J9CUNDP-1 Model: UNDP-1 STATEMENT OF CERTIFICATION The data, data evaluation and equipment configuration represented herein are a true and accurate representation of the measurements of the sample’s radio frequency interference emissions characteristics as of the dates and at the times of the test under the conditions herein specified. Report Prepared by: QUALCOMM Incorporated 5775 Morehouse Drive San Diego, CA 92121-1714 FCC ID: J9CUNDP-1 MPE Analysis QUALCOMM Proprietary 2 In this application we seek modular approval to the UNDP-1 wireless modem for use in mobile configuration. Based on the FCC CFR 47 §1.1310, 2.1091, we have conclude that the UNDP-1 will comply with the FCC rules on RF exposure for mobile devices if the antenna again does not exceed 4 dBi in cellular and 4 dBi in PCS. The following analysis will demonstrate such compliance. The analysis will be done in both cellular and PCS bands which operates in North America. RF Exposure Limit According to FCC CFR 47 §1.1310: the criteria listed in the following table shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation as specified in 1.1307(b). Limits for Maximum Permissible Exposure (MPE) Friis Transmission Formula Friis transmission formula: P d = (P out * G) / (4πR 2 ) Where, P d = power density (mW/cm 2 ) P out = output power to antenna (mW) G = gain of antenna in linear scale R = distance between observation point and center of the radiator (cm) FCC ID: J9CUNDP-1 MPE Analysis QUALCOMM Proprietary 3 UNDP-1 Operating in Cellular Band (824 - 849 MHz) The highest peak conducted output power of UNDP-1 measured in cellular band is 32.98 dBm while the UNPD-1 operates in GSM/GPRS mode. Take the worst case as an example, in which an antenna with 7dBi gain is used. The resulted power density at a distance of 20cm can be calculated as follows: EIRP = 32.98 + 4 = 36.98 dBm = 4988.8 W Power Density = (EIRP * DutyCycle) / (4πR 2 ) = 4988.8 * 0.5 / (4*π* 20 2 ) = 0.496 mW/cm 2 Where DutyCycle is 0.5 for GPRS multislot class 12 operation supporting 4 uplink transmission time slots (the worst case) and R is 20cm. The MPE limit for General Population/Uncontrolled Exposure is shown in the table above and can be derived as follows: MPE limit = 824/1500 = 0.55mW/cm 2 As per the above analysis, the resulted power density is below the MPE limit. Therefore the UNDP-1 in cellular band is compliant with the FCC rules on RF exposure. UNDP-1 Operating in PCS Band (1850 - 1910 MHz) The highest peak conducted output power of UNDP-1 measured in PCS is 29.41 dBm. In the worst case, where an antenna gain is 4dBi, the resulted ERP can be expressed as follows: ERP = 29.41 + 4 - 2.15 = 31.24 dBm (1.33W) < 3 W This ERP value does not include a reduction in power due to the GPRS duty cycle of 0.25, and therefore represents a conservative peak power rather then the average power. In FCC CFR 47 §2.1091, it states that mobile devices identified in the section §2.1091(c) that operate at frequencies above 1.5 GHz with an ERP of 3 watts or more are required to perform routine environmental evaluation for RF exposure prior to equipment authorization or use; otherwise, they are categorically excluded. Therefore, as we can see this resulted ERP is below 3W, the routine environmental evaluation for RF exposure prior to equipment authorization or use for UNDP-1 in PCS band is categorically excluded. In summary, the following table lists the calculated power density for each technology that UNDP- 1 supports. As have been stated above, the worse case is in cellular band while operating in GPRS mode. FCC ID: J9CUNDP-1 MPE Analysis QUALCOMM Proprietary 4 Peak EIRP Average EIRP Adjusted For Duty Cycle Technology Band Frequency (MHz) Duty Cycle Measured Max Conducted Power (dBm) Antenna Gain (dBi) EIRP (dBm) EIRP (W) EIRP (dBm) EIRP (W) Distance (cm) Resulted Power Density (mW/cm^2) FCC MPE Limit (mW/cm^2) GPRS Class 12 Cell 824 0.5 32.98 4.00 36.98 4.99 33.97 2.49 20.00 0.496 0.549 GPRS Class 12 PCS 1850 0.5 29.41 4.00 33.41 2.19 30.40 1.10 20.00 0.218 1.000 CDMA2000 Cell 824 1.00 24.92 4.00 28.92 0.78 28.92 0.78 20.00 0.155 0.549 CDMA2000 PCS 1850 1.00 24.61 4.00 28.61 0.73 28.61 0.73 20.00 0.144 1.000 UMTS Cell 824 1.00 24.42 4.00 28.42 0.70 28.42 0.70 20.00 0.138 0.549 UMTS PCS 1850 1.00 24.57 4.00 28.57 0.72 28.57 0.72 20.00 0.143 1.000 Conclusion The UNDP-1 meets the mobile 20 cm separation distance as specified in Section 2.1091 of the FCC rules. An appropriate RF exposure compliance statement will be placed in the User’s Guide.

FCC ID: J9CUNDP-1 MPE Analysis QUALCOMM Proprietary 1 Universal Notebook Data Platform (UNDP) MPE Evaluation Report FCC Part 22 & 24 Certification FCC ID: J9CUNDP-1 Model: UNDP-1 STATEMENT OF CERTIFICATION The data, data evaluation and equipment configuration represented herein are a true a…

Text truncated - open the document above for the full version.