K7GD301Model D301

Getting started Installing mobile PhoneTools ( mPT ) *** DON’T connect your device to the PC/Notebook until the installation wizard instructs you to do. *** Installing (U)SIM card Starting the installation To install mPT, insert the CD-ROM containing the program in the appropriate drive. When installing mPT from the CD-ROM, the installation program starts automatically. If the installation program fails to start automatically, execute the following instructions: - From the Start menu, select the Run command. Select the CD-ROM drive or type d:\start.exe ( where D: is the CD-ROM drive ). Run the file Setup.exe in order to start the installation. Installation Wizard An InstallShield Wizard will guide you step-by-step through the installation process, prompting for information where needed. During the installation procedure, a program group is created. This group contains the icons of the mPT application and will be accessible from the Start menu. The Setup Complete window will appear when installation is completed. Let the Device Setup completes the device detection, then the following will be displayed Now you can connect the device with the PC/Notebook. A progressing window (below) will be displayed until completion. A connection between the device and the computer is created and the mPT main window is displayed. Uninstalling mobile PhoneTools a. In the Windows taskbar, click the Start menu and select Control Panel. In the Control Panel window, double-click the Add or Remove programs option. b. Highlight the mobile PhoneTools program and, depending on your OS, click the Modify/Delete or Change/Remove button. c. The uninstallation procedure begins and the program will be removed. Mobile PhoneTools main window Once your device is connected to your computer, the following operations can be performed easily:
Send and receive e-mail
SMS messaging,
Get (U)SIM information
Launch an Internet session
Menu Menu tree Right-hand-side icons E-mail SMS (U)SIM information Help Menu LED Indication in USB Modem hardware 1. LED turns off: No power supply to device, 2. Green LED keeps lighting up: Searching network, or waiting PIN input, 3. Green LED flashes slowly: clamp on EDGE/GPRS/GSM network, but still not access data service, 4. Green LED flashes fast: Accessing data service under EDGE/GPRS/GSM service ( e.g. downloading, browsing, video streaming,... ), 5. Blue LED flashes slowly: clamp on 3G/3.5G network but still not access data service. 6. Blue LED flashes fast: Accessing data service under 3G/3.5G ( e.g. downloading, browsing, video streaming,... ), 7. Red LED keeps lighting up: No SIM, 8. Red LED flashes fast: SIM error/All other errors Copyrights © Avanquest Software 2001-07. All rights reserved. Trademarks All product names mentioned in this document are trademarks or registered trademarks of their respective owners. Statement Music or other audio works, whether originating from CD's, MP-3's or some other source, ("Music Materials") may be protected under copyright law. Unauthorized copying of copyrighted works may be contrary to the provisions of the copyright laws of the United States and other countries. It is your responsibility, not Mobile's, to ensure that your use of PC Suit software and/or Devices to copy, edit, play or otherwise use any Music Materials does not violate the copyright laws. You are responsible for obtaining any necessary permission and paying any necessary licensing fees for the Music Materials or other materials you choose to copy, edit, play or otherwise use. A violation of copyright laws could result in a civil or criminal claim brought against you, even if you do not receive any money or other commercial benefit from your copying or other use of the material. This software should only be used for your personal, noncommercial purposes. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CE Marking This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For questions regarding your product or this FCC declaration, contact: Giant International Ltd. 3500 Lenox Road, Suite 630 Atlanta GA 30326 Office: +1 678 904 6077 Fax: +1 678 904 6030 0682 Email : [email protected] To identify this product, refer to the Part, Series, or Model number found on the product. The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Giant Electronics Limited may void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by 1 or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and receiver • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected • Consult the dealer or an experienced radio or television technician for hel…

Text truncated - open the document above for the full version.

3.5G () HSDPA USB MODEM D301 QuickStartGuide Copyrights Trademarks ©AvanquestSoftware2001-07.Allrightsreserved. Allproductnamesmentionedinthisdocumentaretrademarksorregistered trademarksoftheirrespectiveowners. 0682 ForquestionsregardingyourproductorthisFCCdeclaration,contact: GiantInternationalLtd. 3500LenoxRoad,Suite630 AtlantaGA30326 Office:+16789046077;Fax:+16789046030 Email :[email protected] D301USBQuickStartGuide opensize:95x380mm foldedsize:95x120mm 80/100 artpaper/2sideprintblack/folded KEM-PK26405 Eng Frontside Gettingstarted 1 2 3 Menu bar Sendandreceivee-mail SMSmessaging, Get(U)SIMinformation LaunchanInternetsession Use the right hand side menu-bar to access more services. 4 Backside 5 E-mail Send message (U)SIMinformation Help Menu SendSendShortMessage Outbox ReceiveInbox RetrieveSMS SetupGeneralSetup LiveUpdate LiveUpdateConfiguration PINCodeModification ActivatePINCode ChangeOperator BandSelection SMSConfiguration InternetConnections ViewInternetConnectionsLog DeviceInformation HelpHelpTopics AboutmobilePhoneTools Exit (Nosignal :nobar) (1-2bars :Orangecolor) (3-5bars :Greencolor) OperatorName Red -Deviceisnot detected Blue :Deviceisdetected Connectedtime Totaldatareceivedandsent Uplinkspeed Clicktoconnector disconnectthedial-up NumberofunreadSMS ClickheretoopenSMSinbox Downlinkspeed cover Statement Music or other audio works, whether originating from CD's, MP-3's or some other source, ("Music Materials") may be protected under copyright law. Unauthorized copying of copyrighted works may be contrary to the provisions of the copyright laws of the United States and other countries. It is your responsibil- ity, not Device's, to ensure that your use of mobile PhoneTools software and/or Devices to copy, edit, play or otherwise use any Music Materials does not violate the copyright laws. You are responsible for obtaining any necessary permission and paying any necessary licensing fees for the Music Materials or other materials you choose to copy, edit, play or otherwise use. A violation of copyright laws could result in a civil or criminal claim brought against you, even if you do not receive any money or other commercial benefit from your copying or other use of the material. This software should only be used for your personal, noncommercial purposes. European Union United States of America Declaration of Conformity for Products Marked with the FCC Logo This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. To identify this product, refer to the Part, Series, or Model number found on the product. Modification statement The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Giant Electronics Limited may void the user’s authority to operate the equipment. Classs B digital devices regulary notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by 1 or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and receiver • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected • Consult the dealer or an experienced radio or television technician for help Wireless notice This product emits radio frequency energy but it has been tested for FCC RF for body SAR compliance with the provided USB cable for use close to the body, While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirement for RF exposure provided that it is used with a USB cable that ensures a minimum distance of 1.5 cm from the human body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. The product must be installed to provide a separation distance of at least 1.5 cm from all the persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Nevertheless, the device should be used in such a manner that the potential for human contact with the antenna during normal operation is minimized. P.1 P.2 P.4 Manual folded Preparation DON’T connect your D301 to your computer until the installation wizard instructs you to do so. Make sure you insert your SIM or (U)SIM into D301 in the correct direction Installing “mobile PhoneTools” ( mPT ) Start the installation wizard To install mPT, insert the installation CD contained in the package into your computer’s CD-ROM. An installation wizard will starts automatically. If the installation wizard fails to start automatically, do the following. 1. Explore your D301 CD 2. Find the start.exe file in the CD content. Run this start.exe file to start the installation. Install “mobile PhoneTools” Select [Install “mobile PhoneTools”] selection in the wizard to start mPT installation. The wizard will then guide you step-by-step through out the installation . When you see the below window prompt up. Please connnect your D301 device to your computer. Once you have connected your D301, installation wizard will start to detect the device. Once it were d…

Text truncated - open the document above for the full version.

attn: Reviewing Engineer MET Laboratories, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: 15.19 Statement (FCC ID: K7GD301) TO WHOM IT MAY CONCERN The statement: "This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation” Is not placed in the label of the equipment due to the following reasons: - Type label is too small (No room for this writing). - Required text is already included in the user guide This statement is placed in a prominent location in the instruction manual. Please contact me if there is any information you may need. If you have any questions, please feel free to contact me at the address shown below. Sincerely, P.A. Name/Title: Derek Shek / IOT Manager-Mobile Phone Dept Company name: Giant Electronics, Ltd. Telephone: +852 2797 1428 E-mail Address: [email protected]

attn: Reviewing Engineer MET Laboratories, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR D301 (FCC ID: K7GD301) To Whom It May Concern: Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b) (4) of the Freedom of Information Act, Giant Electronics, Ltd. requests confidentiality for the following products: FCC ID Model K7GD301 D301 For the product stated above, we request that the following information be held confidential: 1) Circuit diagrams 2) Block Diagrams 3) Bill of materials 4) Operational Description 5) Power tune-up procedure No other items submitted as part of the equipment authorization filing process are deemed confidential. The above exhibits contain Giant Electronics, Ltd. trade secrets and proprietary information that could be of benefit to our competitors. This material is not customarily available to the general public and we request that it be withheld from public inspection. Please contact me if there is any information you may need. Sincerely, P.A. Name/Title: Derek Shek / IOT Manager-Mobile Phone Dept Company name: Giant Electronics, Ltd. Telephone: +852 2797 1428 E-mail Address: [email protected]

MET Laboratories, Inc. Safety Certification - EMI - Telecom Environmental Simulation 33439 WESTERN AVENUE ! UNION CITY, CALIFORNIA 94587 ! PHONE (510) 489-6300 ! FAX (510) 489-6372 September 19, 2007 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 RE: Request to Supercede Document, FCC ID: K7GD301 To Whom It May Concern: We would like to request the FCC to remove the manual exhibit listed as “3G Manual” from the database. This document was incorrectly labeled as a manual exhibit instead of an Operational Description exhibit. The Grantee believes this document holds confidential information and requests to resubmit the document as Operational Description which is covered under the current Confidentiality Request. If any additional information is needed, please let me know. Thank you for your quick response to this matter. Regards, Jennifer Sanchez TCB Administrator MET Laboratories, Santa Clara CA 408-213-2359 [email protected] [email protected]

REPORT ON RF Exposure Assessment Giant Electronics Limited USB Modem Model Number D301 Doc Number 75902059 Report 01 Issue 2 August 2007 Choose certainty. Add value. Commercial-in-Confidence TUV Product Service Ltd, Octagon House, Concorde Way, Segensworth North, Fareham, Hampshire, United Kingdom, PO15 5RL Tel: +44 (0) 1489 558100. Website: www.tuvps.co.uk ; www.babt.com Doc Number 75902059 Report 01 Issue 2 Page 1 of 13 REPORT ON RF Exposure Assessment Giant Electronics Limited USB Modem Model Number D301 Doc Number 75902059 Report 01 Issue 2 August 2007 PREPARED FOR: AT4 Wireless Parque Tecnológico de Andalucía c/ Severo Ochoa 2 E-29590 – Málaga PREPARED FOR Giant Electronics Limited 7/F, Elite Industrial Building 135-137 Hoi Bun Road Kwun Tong Kowloon Hong Kong ATTESTATION The wireless device described within this report has been shown to be capable of compliance with the basic restrictions related to human exposure to electromagnetic fields (10 MHz - 300 MHz) - General public. The calculations shown in this report were made in accordance the procedures specified in the applied test specification(s). All reported calculations were carried out on a sample of equipment to demonstrate compliance with the applied test specification(s) the sample tested was found to comply with the requirements of the applied rules. PREPARED BY A Miller Principal Engineer APPROVED BY M Jenkins Authorised Signatory DATED 30 th August 2007 This report has been up-issued to Issue 2 due to the point of investigation being corrected to 20cm. Doc Number 75902059 Report 01 Issue 2 Page 2 of 13 CONTENTS Section Page No 1 Report Summary.............................................................................................................................. 3 1.1 Status................................................................................................................................................. 4 1.2 Test Specifications............................................................................................................................. 4 1.3 References ........................................................................................................................................ 4 1.4 Summary ........................................................................................................................................... 5 1.5 Required Minimum Separation Distances ......................................................................................... 5 2 Test Details....................................................................................................................................... 6 2.1 Rationale for Assessment of the RF Exposure ................................................................................. 7 2.2 Defined Limits .................................................................................................................................... 8 2.3 Establishing Wavelength and 1/4 Wavelength .................................................................................. 8 2.4 Far Field Calculations ........................................................................................................................ 9 2.5 Field Representations........................................................................................................................ 9 3 Figures ............................................................................................................................................ 10 3.1 Field Representations...................................................................................................................... 11 4 Disclaimers and Copyright ........................................................................................................... 12 4.1 Disclaimers and Copyright............................................................................................................... 13 Doc Number 75902059 Report 01 Issue 2 Page 3 of 13 SECTION 1 REPORT SUMMARY SUMMARY Based upon the supplied data for USB Modem Model Number D301 and point of investigation being 20.0 cm (0.200 m). GENERAL PUBLIC LIMITS The calculations have shown that they meet the General Public Exposure Levels described in the FCC 47 CFR § 1.1310 Guidelines OCCUPATIONAL LIMITS The calculations have shown that they meet the Occupational Exposure Levels described in the FCC 47CFR § 1.1310 Guidelines Doc Number 75902059 Report 01 Issue 2 Page 4 of 13 1.1 STATUS APPLICANT Giant Electronics Limited MANUFACTURING DESCRIPTION USB Modem STATUS OF TEST Specific Absorption Rate Testing WIRELESS RADIO POWER CLASS GSM 850 MHz Class 4 GSM 900 MHz Class 4 DCS 1800 MHz Class 1 PCS 1900 MHz Class 1 WIRELESS RADIO GPRS CLASS Class B GPRS MULTISLOT CLASS 10(4Dn,2Up,5 Sum) WCDMA FREQUENCY BAND FDD1 (1922.4 to 1977.6 MHz) FDD2 (1852.4 to 1906.6 MHz) FDD5 (826.4 to 846.6 MHz) WCDMA POWER CLASS Power Class 3 (+24dBm) MANUFACTURER Giant Electronics Limited TYPE OR MODEL NUMBER D301 HARDWARE VERSION ES2.0 SOFTWARE VERSION SLE-2.00PRETEST1 SERIAL NUMBER 20-022F 1.2 TEST SPECIFICATIONS 1. OET Bulletin 65 Edition 97-01 August 1997 - Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields 1.3 REFERENCES 2. National Council on Radiation Protection and Measurements (NRPC) - Report No. 86(1986) "Biological Effects and Exposure Criteria for Radio frequency Electromagnetic Fields". 3. FCC Guidelines for Evaluating exposure to RF Emissions - 47 CFR § 1.1310; 47 CFR § 1.1307(b) & 47 CFR § 80.83. 4. EN 50383:2002 - Basic standard for the calculation and measurement of electromagnetic field strength and SAR related to human exposure from radio base stations and fixed terminal stations for wireless telecommunication systems (110 MHz - 40 GHz). 5. IEEE Std C95.1-2005: IEEE Standard for Safety Levels with respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3KHz to 300GHz. Doc Number 75902…

Text truncated - open the document above for the full version.

Report No.: 25903RET Date: 2007-06-25 Page: 2 of 9 FDT08_04 INDEX 1. COMPETENCE AND GUARANTEES..........................................................................................3 2. GENERAL CONDITIONS..............................................................................................................3 3. CHARACTERISTICS OF THE TEST............................................................................................3 3.1 TEST REQUESTED.................................................................................................................3 3.2 REQUIREMENTS AND METHOD........................................................................................4 4. IDENTIFICATION DATA SUPPLIED BY THE APPLICANT.....................................................5 4.1 APPLICANT.............................................................................................................................5 4.2 REPRESENTATIVE................................................................................................................5 4.3 TEST SAMPLES SUPPLIER...................................................................................................5 4.4 IDENTIFICATION OF ITEM/ITEMS TESTED.....................................................................5 5. USAGE OF SAMPLES, PERIOD OF TESTING AND ENVIRONMENTAL CONDITIONS.....6 5.1 USAGE OF SAMPLES............................................................................................................6 5.2 PERIOD OF TESTING............................................................................................................6 5.3 ENVIROMENTAL CONDITIONS..........................................................................................7 6. TEST RESULTS..............................................................................................................................8 7. REMARKS AND COMMENTS......................................................................................................8 8. SUMMARY......................................................................................................................................9 ANNEXES ANNEX A. TEST RESULTS FOR FCC PART 22 ANNEX B. TEST RESULTS FOR FCC PART 24 ANNEX C. MEASURING RESULTS FOR ELECTROMAGNETIC EMISSION ANNEX D. PHOTOGRAPHS Report No.: 25903RET Date: 2007-06-25 Page: 3 of 9 FDT08_04 1. COMPETENCE AND GUARANTEES Centro de Tecnología de las Comunicaciones (AT4 WIRELESS), S.A. is a laboratory with a measurement facility in compliance with the requirements of Section 2.948 of the FCC rules and has been added to the list of facilities whose measurements data will be accepted in conjunction with applications for Certification under Parts 15 or 18 of the Commission's Rules. Registration Number: 905266. Centro de Tecnología de las Comunicaciones (AT4 WIRELESS), S.A. is a laboratory with a measurement site in compliance with the requirements of RSS 212, Issue 1 (Provisional) and has been added to the list of filed sites of the Canadian Certification and Engineering Bureau. Reference File Number: IC 4621. In order to assure the traceability to other national and international laboratories, AT4 WIRELESS has a calibration and maintenance programme for its measuring equipment. AT4 WIRELESS guarantees the reliability of the data presented in this report, which is the result of measurements and tests performed to the item under test on the date and under the conditions stated on the report and is based on the knowledge and technical facilities available at AT4 WIRELESS at the time of execution of the test. AT4 WIRELESS is liable to the client for the maintenance by its personnel of the confidentiality of all information related to the item under test and the results of the test. 2. GENERAL CONDITIONS 1. This report only refers to the item that has undergone the test. 2. This report does not constitute or imply by its own an approval of the product by the Certification Bodies or competent Authorities. 3. This document is only valid if complete; no partial reproduction can be made without written approval of AT4 WIRELESS. 4. This test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of AT4 WIRELESS and the Accreditation Bodies. 3. CHARACTERISTICS OF THE TEST 3.1 TEST REQUESTED Radio measurements according to FCC parts 22 and 24 for 3.5 G (HSDPA, WCDMA, GPRS, EGPRS) USB data modem. 1. Radio measurements according to FCC parts 22 and 24 for 3.5 G (HSDPA, WCDMA, GPRS, EGPRS) USB data modem. 2. Continuous conducted emission, power leads: Standard: FCC Rules and Regulations 47 CFR Part 15 Limit: Class B Method: FCC Rules and Regulations 47 CFR Part 15, Subpart C Report No.: 25903RET Date: 2007-06-25 Page: 4 of 9 FDT08_04 3.2 REQUIREMENTS AND METHOD The test has been carried out according to the following documents and standards: 1. FCC part 22. 2. FCC part 24. 3. FCC Rules and Regulations 47 CFR Part 15, Subpart C: Limits and methods of measurements for radio frequency devices. Intentional radiators Radiated testing was performed in AT4 WIRELESS' semi-anechoic chamber. This site has been fully described in a report submitted to the FCC and was accepted in a letter dated July 25, 2002. Radiated measurements were made in accordance with the general procedures of ANSI C63.4: 2003 and substitution method according to TIA/EIA 603-C: 2004. The testing procedures used are: 1. PEEM001: Medida de la tensión perturbadora en bornes de alimentación según EN 55022. Uncertainty (factor k=2) was calculated according to the following CETECOM's internal documents: 1. PODT000: Procedimiento para el cálculo de incertidumbres de medida 2. FEM12_07: Formato de cálculo de incertidumbre a aplicar en la medida de la tensión perturbadora en bornes de alimentación según EN 55022. The instrumentation used to perform the testing is listed below: 1. Semianechoic Absorber Lined Chamber IR 11. BS. 2. …

Text truncated - open the document above for the full version.

Report No.: 25903RET Date: 2007-06-25 Page: 1 of 8 Annex D FET18_00.DOC ANNEX D PHOTOGRAPHS (Number of photographs: 7) Report No.: 25903RET Report No.: 25903RET Date: 2007-06-25 Page: 2 of 8 Annex D FET18_00.DOC 1. Equipment (front view) Report No.: 25903RET Date: 2007-06-25 Page: 3 of 8 Annex D FET18_00.DOC 2. Equipment (back view) Report No.: 25903RET Date: 2007-06-25 Page: 4 of 8 Annex D FET18_00.DOC 3. Equipment for conducted measurements Report No.: 25903RET Date: 2007-06-25 Page: 5 of 8 Annex D FET18_00.DOC 4. General test set-up for radiated measurements. Report No.: 25903RET Date: 2007-06-25 Page: 6 of 8 Annex D FET18_00.DOC 5. Test set-up for radiated measurements below 1 GHz. Report No.: 25903RET Date: 2007-06-25 Page: 7 of 8 Annex D FET18_00.DOC 6. Test set-up for radiated measurements above 1 GHz. Report No.: 25903RET Date: 2007-06-25 Page: 8 of 8 Annex D FET18_00.DOC 7. Test set-up for conducted measurements.