K7GT4500Transmitter Portion of FRS & GMRS

PR EL I MI N A R Y T4500 Series Two-Way Radio User Guide PRELIMINARY November 12, 2002 2 P R E L I M I NA RY Congratulations on your purchase of a Motorola Product! Product registration is an important step toward enjoying your new Motorola product. Registering helps us facilitate warranty service, and permits us to contact you should your Motorola product require an update of other service. Registration is not required for warranty coverage. To register your product on-line, visit www.motorola.com/warranty/radios. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. For a copy of a large-print version of this guide, or for product-related questions, call: 1-800-353-2729 in the USA 1-888-390-6456 TTY (Text Telephone) On the web, visit our website at www.motorola.com/store. Motorola, the Stylized M Logo, and all other trademarks indicated as such herein are trademarks of Motorola, Inc.  Reg. U.S. Pat. & Tm. Off. © 2002 Motorola, Inc. All rights reserved. Motorola Personal Communications Sector Consumer Products Division 1705 Belle Meade Court Lawrenceville, GA 30043 Safety and General Information 1 SAFETY AND GENERAL INFORMATIONIMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATIONREAD THIS INFORMATION BE FORE USING YOUR RADIO The information provided in this document supersedes the general safety information contained in user guides published prior to July 2000.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Transmit and Receive ProcedureYour two-way radio contains a transmitter and a receiver. To transmit (talk), you must push the Talk button; to receive (listen), release the Talk button.Exposure To Radio Frequency EnergyYour Motorola radio is designed to comply with the following national and international standards and guidelines regarding exposure of human beings to radio frequency electromagnetic energy: • United States Federal Communications Commission, Code of Federal Regulations; 47 CFR part 2 sub-part J 6881040B40a.book Page 1 Friday, July 12, 2002 11:46 AM Safety and General Information 2 • American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineer s (IEEE) C95. 1-1992 • Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition • International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998 • Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radiofrequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999 • Australian Communications Authority Radiocommunications (Electromagnetic Radiation - Human Exposure) Standard 2001 (applicable to wireless phones only) • ANATEL, Brasil Regulatory Authority, Resolution 256 (April 11, 2001) “additional requirements for SMR, cellular and PCS product certification.” To assure optimal radio performance and make sure human exposure to radio frequency electromagnetic energy is within the guidelines set forth in the above standards, always adhere to the following procedures:PORTABLE RADIO OPERATION AND EME EXPOSUREAntenna CareUse only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the radio and may violate FCC regulations. 6881040B40a.book Page 2 Friday, July 12, 2002 11:46 AM Safety and General Information 3 DO NOT hold the antenna when the radio is “IN USE.” Holding the antenna affects call quality and may cause the radio to operate at a higher power level than needed.Two-way Radio OperationWhen using your radio as a traditional two-way radio, hold the radio in a vertical position with the microphone one to two inches (2.5 to 5 cm) away from the lips.Body-worn OperationTo maintain compliance wit h FCC/Health Canada RF exposure guidelines, if you wear a radio on your body when transmitting, always place the radio in a Motorola supplied or approved clip, holder, holster, case, or body harness for this product. Use of non-Motorola-approved accessories may exceed FCC/Health Canada RF exposure guidelines. If you do not use one of the Motorola-supplied or approved body-worn accessories, and are not using the radio held in the normal use position, ensure the radio and its antenna are at least one inch (2.5 cm) away from your body when transmitting . To control your exposure and ensure compliance with the general population/uncontrolled environment exposure limits, always adhere to the following procedure:• Transmit no more than 50% of the time.• To transmit (talk), push the Talk button.• To receive calls, release the Talk button. 6881040B40a.book Page 3 Friday, July 12, 2002 11:46 AM Safety and General Information 4 Transmitting 50% of the time, or less, is important because the radio generates measurable RF energy exposure only when transmitting (in terms of measuring standards compliance).Data OperationIf applicable, when using any data feature of the radio, with or without an accessory cable, position the radio and its antenna at least one inch (2.5 cm) away from the body.Approved AccessoriesFor a list of approved Motorola accessories visit our website at www.mot.com.ELECTROMAGNETIC INTERFERENCE/COMPATIBILITYNote: Nearly every electronic device is susc eptible to electromagnetic interference (EMI) if inadequately shielded, designed or otherwise configured for electromagnetic compatibility. • FACILITIESTo avoid electromagnetic interference and/or compatibility conflicts, turn off your radio in any facility where posted notice s instruct you to do so. Hospitals or health care facilities may be using equipment th at is sensitive to external RF energy. • AIRCRAFTWhen instructed to do so, turn off your radio wh…

Text truncated - open the document above for the full version.

Test Setup FCCID : K7GT5400 External Photo -front External Photo - rear

Test Setup FCCID : K7GT5400 Internal Photo - 1 Internal Photo - 2 Test Setup FCCID : K7GT5400 Internal Photo – 3

• The test results reported in this report shall refer only to the sample actually tested and shall not refer or be deemed a refer to bulk from which such a sample may be said to have been obtained. • This report shall not be reproduced except in full without prior authorization from Intertek Testing Services Hong Kong Limited • For Terms And Conditions of the services, it can be provided upon request. • The evaluation data of the report will be kept for 3 years from the date of issuance. Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Giant Electronics Ltd. Application For Certification (FCC ID: K7GT4500) January 10, 2003 WO# 0217515 DL/Sandy January 10, 2003 INTERTEK TESTING SERVICES FCC ID: K7GT4500 i SUMMARY OF CONTENTS LIST OF EXHIBITS EXHIBIT 1:General Description EXHIBIT 2:System Test Configuration EXHIBIT 3:RF Power Output EXHIBIT 4:Modulation Characteristics EXHIBIT 5:Occupied Bandwidth EXHIBIT 6:Spurious Emission EXHIBIT 7:Frequency Stability EXHIBIT 8:Technical Specifications EXHIBIT 9:Product Labelling EXHIBIT 10:Photographs EXHIBIT 11:Instruction Manual EXHIBIT 12:Tune Up Procedure EXHIBIT 13:Part List EXHIBIT 14:Input Current EXHIBIT 15:RF Exposure Info EXHIBIT 16:Confidentiality Request INTERTEK TESTING SERVICES FCC ID: K7GT4500 ii MEASUREMENT/TECHNICAL REPORT Application:Giant Electronics Ltd. Trade Name/Model No:MOTOROLA T4500 Date:January 10, 2003 This report concerns (check one:)Original Grant X Class II Change Equipment Type: GMRS + FRS Deferred grant requested per 47 CFR 0.457(d)(1)(ii)? Yes No X If yes, defer until: date Company Name agrees to notify the Commission by: date of the intended date of announcement of the product so that the grant can be issued on that date. Report prepared by:Derek Leung Intertek Testing Services 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Phone:852-2173-8504 Fax:852-2371-0521 INTERTEK TESTING SERVICES FCC ID: K7GT4500 iii Table of Contents 1.0 General Description............................................................................................................2 1.1 Product Description.........................................................................................................2 1.2 Related Submittal(s) Grants..............................................................................................3 1.3 Test Methodology...........................................................................................................3 1.4 Test Facility.....................................................................................................................3 2.0 System Test Configuration.................................................................................................5 2.1 Justification......................................................................................................................5 2.2 EUT Exercising Software.................................................................................................6 2.3 Special Accessories.........................................................................................................6 2.4 Measurement Uncertainty.................................................................................................6 2.5 Equipment Modification....................................................................................................6 3.0 RF Output Power (Section 95.639(d))................................................................................8 4.0 Modulation Characteristics (Section 95.637(a))..............................................................12 4.1 Modulation Frequiency Response...................................................................................13 4.2 Modulation Limiting Characteristic..................................................................................15 4.3 Audio Low Pass Filter Response....................................................................................17 5.0 Occupied Bandwidth (Section 95.633(c)) .........................................................................19 6.0 Spurious Emission (Section 95.635(b)).............................................................................21 6.1 Field Strength of Spurious Radiation...............................................................................22 7.0 Frequency Stability (Section 95.627)................................................................................28 7.1 Frequency Tolerance......................................................................................................29 7.2 Temperature Extreme Condition.....................................................................................31 7.3 Voltage Extreme Condition.............................................................................................34 8.0 Technical Specifications....................................................................................................37 9.0 Product Labelling..............................................................................................................41 10.0 Equipment Photographs..................................................................................................44 11.0 Instruction Manual..........................................................................................................46 12.0 Tune Up Procedure.........................................................................................................48 13.0 Part List...........................................................................................................................50 14.0 Input Current...................................................................................................................52 15.0 RF Exposure Info............................................................................................................54 16.0 …

Text truncated - open the document above for the full version.

Modulation Limiting Characteristic 0.00 0.50 1.00 1.50 2.00 2.50 475767778797107117127137 Modulation Input (dBSPL) Frequency Deviation (kHz) 500Hz 1000Hz 2500Hz 3125Hz

Modulation Frequency Response 0.00 0.50 1.00 1.50 2.00 20070012001700220027003200370042004700 Modulation Frequency (Hz) Frequency Deviation (kHz) Modulation Frequency Response 0.00 0.50 1.00 1.50 30080013001800230028003300380043004800 Modulation Frequency (Hz) Modulation Index (%)

Audio Low Pass Filter Response -70.0 -60.0 -50.0 -40.0 -30.0 -20.0 -10.0 0.0 10.0 110100 Frequency (kHz) dB relative to 1 kHz LPF Response TIA/EIA-603

Test Setup FCCID : K7GT4500 Radiated -front Radiated - rear