KFR-ZD2106US-7Door/Window Sensor

www.visionsecurity.com.tw Installation & Operation Manual Product Description and Specification: Introduction Thanks for choosing the Vision’s wireless door/window sensor of the home security device. This sensor is a Z-Wave™ PLUS V2 enabled device (interoperable, two-way RF mesh networking technology) and is fully compatible with any Z-Wave™ enabled network and it’s security framework. Every mains powered Z-Wave PLUS V2 enabled device acts as a signal repeater and multiple devices result in more possible transmission routes which helps eliminate “RF dead-spots” Z-Wave™ PLUS V2 enabled devices displaying the Z-Wave™ PLUS V2 logo can also be used with it regardless of the manufacturer, and ours can also be used in other manufacturer’s Z-Wave™ PLUS V2 enabled networks. Monitors door and window. Sends Z wave signal when door or window opening or closing. Lower power consumption, longer operating distance and battery life. Improving RF communication. When the device is secure included into Z-Wave network, above communication will be encrypted. ZD2106 supports SECURITY S0 / SECURITY S2 UNAUTHENTICATED / SECURITY S2 AUTHENTICATED. Limited Warranty Vision Guarantees that every wireless door/window sensor is free from physical defects in material and workmanship under normal use for one year from the date of purchase. If the product proves defective during this one-year warranty period, Vision will replace it free of charge. Vision does not issue any refunds. This warranty is extended to the original end user purchase only and is not transferable. This warranty does not apply to: (1) damage to units caused by accident, dropping or abuse in handling, or any negligent use; (2) units which have been subject to unauthorized repair, taken apart, or otherwise modified; (3) units not used in accordance with instruction; (4) damages exceeding the cost of the product; (5) transit damage, initial installation costs, removal cost, or reinstallation cost. For information on additional devices, please visit us at www.visionsecurity.com.tw Federal Communications Commission Statement This equipment has been followed to comply with Part 15 of the FCC Rules. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one of the following measures: -Reorient or relocate the receiving antenna, -Increase the separation between the equipment and receiver, -Connect the equipment into and outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. Specification:Package Content Protocol: Z-Wave™ (ZGM130S) Frequency Range: Operating Range: Up to 100 feet line of sight Operating Temp.: -15°C~ 60°C (5°F ~140°F) Battery: CR2 * 1PC 1pc ZD 2106-7 Door Sensor 1pc Magnet 1pc CR2032 Lithium Battery 1pc Accessory Pack 1pc Installation & Operation manual (ZD2106IN-7) (ZD2106MY-7) (ZD2106EU-7) (ZD2106RU-7) (ZD2106US-7) (ZD2106IL-7) (ZD2106KR-7) (ZD2106HK-7) (ZD2106JP-7) (ZD2106BR-7) 865.22 868.10 868.42 869.00 908.42 916.00 919~923 919.80 922~926 921.42 MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz Z-Wave Command Classes: COMMAND_CLASS_ASSOCIATION_GRP_INFO_V3 COMMAND_CLASS_ASSOCIATION_V2 COMMAND_CLASS_BATTERY COMMAND_CLASS_DEVICE_RESET_LOCALLY COMMAND_CLASS_FIRMWARE_UPDATE_MD_V5 COMMAND_CLASS_INDICATOR_V3 COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 COMMAND_CLASS_NOTIFICATION_V8 COMMAND_CLASS_POWERLEVEL COMMAND_CLASS_SECURITY COMMAND_CLASS_SECURITY_2 COMMAND_CLASS_SUPERVISION COMMAND_CLASS_TRANSPORT_SERVICE_V2 COMMAND_CLASS_VERSION_V3 COMMAND_CLASS_WAKE_UP_V2 COMMAND_CLASS_ZWAVEPLUS V2_INFO COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V4 Z-Wave S2 Support Command Classes : COMMAND_CLASS_ASSOCIATION_GRP_INFO_V3 COMMAND_CLASS_ASSOCIATION_V2 COMMAND_CLASS_BATTERY COMMAND_CLASS_DEVICE_RESET_LOCALLY COMMAND_CLASS_FIRMWARE_UPDATE_MD_V5 COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 COMMAND_CLASS_NOTIFICATION_V8 COMMAND_CLASS_POWERLEVEL COMMAND_CLASS_SUPERVISION COMMAND_CLASS_VERSION_V3 COMMAND_CLASS_WAKE_UP_V2 0x07 Close:0x07 Open:0X16 Close:0x00 Open:0X03 0x06Reed Switch Tamper Switch Reed Switch Tamper Switch Notification V8 Type Notification Type Event SWITCH TYPESTATUS ZD 20106-7 V0 1081219 Door/ Window Sensor ZD2106IN-7 ZD2106MY-7 ZD2106EU-7 ZD2106RU-7 ZD2106US-7 ZD2106IL-7 ZD2106KR-7 ZD2106HK-7 ZD2106JP-7 ZD2106BR-7 Basic Set: Open 0xFF Reed Switch Close 0x00 Installation Notice: If you are installing the entire Z-Wave™ system for the first time, please refer to the installation guide of Z-Wave™ Interface Controller before installing ZD2106. 1 For “Inclusion” in (adding to) a network: Put the Z-Wave™ Interface Controller into “inclusion” mode, and following its instruction to add the ZD2106 to your controller. To get in the “inclusion” mode, make sure the rear cover has been closed firmly and trigger the reed switch (close & open) 3 times within 5 seconds for sending the NIF. After sending NIF, Z-Wave will send the auto inclusion; otherwise, ZD2106 will go to sleep after 30 seconds. For “Exclusion” from (removing from) a network: Put the Z-Wave™ Interface Controller into “exclusion” mode, and following its instructi…

Text truncated - open the document above for the full version.

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Vision Automobile electronics Industrial Co. Ltd. Address No.78, Gongye 3rd Rd.,Technology Industrial Park, Tainan, Taiwan,70955 Grantee Code KFR FCC ID KFR-ZD2106US-7 Authorized Contact Name Sarah Wan Contact Email [email protected] Contact Phone 886-6-3843888 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date: Print Name: Sarah Wan Title: Manager *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Vision Automobile electronics Industrial Co., Ltd. No. 78, Gongye 3rd Rd.,Technology Industrial Park,Tainan City 70955,Taiwan Date: April 22, 2021 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: KFR-ZD2106US-7 To whom it may concern: We, the undersigned, hereby authorize Ms. Daphne Liang / Section Manager of SGS Compliance Certification Services Inc. to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with <<Vision Automobile electronics Industrial Co., Ltd.>>. This authorization is valid until further written notice from the applicant. Name: Sarah Wan Title: Manager Signature: On behalf of Company: Vision Automobile electronics Industrial Co. Ltd. Telephone: +886.6.3843888

April 22 th ,2021 Vision Automobile electronics Industrial Co., Ltd. No. 78, Gongye 3rd Rd.,Technology Industrial Park,Tainan City 70955,Taiwan To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Vision Automobile electronics Industrial Co., Ltd. No. 78, Gongye 3rd Rd.,Technology Industrial Park, Tainan City 70955 Taiwan (R.O.C) Regarding: Confidentiality Request regarding application for FCC ID: KFR-ZD2106US-7 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Sarah Wan. Manager SD/RD Vision Automobile electronics Industrial Co., Ltd.

Page 1 / 4 Report No.: T210503N04 Ref. No.: Rev. 00 External Photo (Model: ZD2106US-7)

ZD2106US-7 Diagram Label location Label location Model: ZD2106US-7 FCC ID ：KFR-ZD2106US-7

Page 2 / 4 Report No.: T210503N04 Ref. No.: Rev. 00 Internal Photo (Model: ZD2106US-7) Page 3 / 4 Report No.: T210503N04 Ref. No.: Rev. 00 Page 4 / 4 Report No.: T210503N04 Ref. No.: Rev. 00 ANT

FCC ID: KFR-ZD2106US-7 Page: 1 / 39 Report No.: T210503N04-RP1 Rev.: 01 No.8, Jiucengling, Xinhua Dist., Tainan City, Taiwan /台南市新化區礁坑里九層嶺8號 t:(886-6) 5802-201 f:(886-6) 5802-202 www.sgs.com.tw www.ccsrf.com Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Compliance Certification Services Inc. 程智科技股份有限公司 Member of the SGS Group FCC 47 CFR PART 15 SUBPART C ANSI C63.10: 2013 TEST REPORT For Door/Window Sensor Model: ZD2106US-7 Data Applies To: N/A Brand: Test Report Number: T210503N04-RP1 Issued to: Vision Automobile Electronics Industrial Co Ltd No.78, Gongye 3rd Rd., Technology Industrial Park, Tainan Taiwan 70955 Issued by: Compliance Certification Services Inc. Tainan Lab. No.8, Jiucengling, Xinhua Dist., Tainan Cit y , Taiwan Issued Date: May 27, 2021 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. Ltd. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document Page: 2 / 39 Report No.: T210503N04-RP1 Ref. No.: Rev.: 01 REVISION HISTORY Rev. Issue Date Revisions Effect Page Revised By 00 May 20, 2021 Initial Issue ALL Gina Lin 01 May 27, 2021 See the following note rev.01 Page 5~6 Gina Lin Note: ※ Rev .00 Issue Date: May 20, 2021 Original Report ※ Rev.01 Issue Date: Ma y 27, 2021 Revise EUT description & general test procedures. Page: 3 / 39 Report No.: T210503N04-RP1 Ref. No.: Rev.: 01 TABLE OF CONTENTS 1. TEST RESULT CERTIFICATION ........................................................................ 4 2. EUT DESCRIPTION ............................................................................................. 5 3. TEST METHODOLOGY ....................................................................................... 6 3.1 EUT CONFIGURATION .................................................................................. 6 3.2 EUT EXERCISE .............................................................................................. 6 3.3 GENERAL TEST PROCEDURES ................................................................... 6 3.4 FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS ....................... 7 3.5 DESCRIPTION OF TEST MODES .................................................................. 7 4. INSTRUMENT CALIBRATION ............................................................................ 8 4.1 MEASURING INSTRUMENT CALIBRATION .................................................. 8 4.2 MEASUREMENT EQUIPMENT USED ........................................................... 8 4.3 MEASUREMENT UNCERTAINTY .................................................................. 9 5. FACILITIES AND ACCREDITATIONS .............................................................. 10 5.1 FACILITIES ................................................................................................... 10 5.2 EQUIPMENT ................................................................................................. 10 5.3 LABORATORY ACCREDITATIONS LISTING ............................................... 10 5.4 TABLE OF ACCREDITATIONS AND LISTINGS ........................................... 11 6. SETUP OF EQUIPMENT UNDER TEST ........................................................... 12 6.1 SETUP CONFIGURATION OF EUT ............................................................. 12 6.2 SUPPORT EQUIPMENT ............................................................................... 12 6.3 CONFIGURATION OF SYSTEM UNDER TEST ........................................... 13 6.4 EUT OPERATING CONDITION .................................................................... 13 7. FCC PART 15.249 REQUIREMENTS ................................................................ 14 7.1 20 dB BANDWIDTH ...................................................................................... 14 7.2 DUTY CYCLE ................................................................................................ 18 7.3 SPURIOUS EMISSION ................................................................................. 21 7.4 POWERLINE CONDUCTED EMISSIONS .................................................... 35 APPENDIX I - PHOTOGRAPHS OF TEST SETUP ................................................. 36 Page: 4 / 39 Report No.: T210503N04-RP1 Ref. No.: Rev.: 01 1. TEST RESULT CERTIFICATION Product: Door/Window Sensor Model: ZD2106US-7 Data Applies To: N/A Brand Name: Applicant: Vision Automobile Electronics Industrial Co Ltd No.78, Gongye 3rd Rd., Technology Industrial Park, Tainan Taiwan 70955 Manufacturer: Vision Automobile Electronics Industrial Co Ltd No.78, Gongye 3rd Rd., Technology Industrial Park, Tainan Taiw…

Text truncated - open the document above for the full version.

Page: 36 / 39 Report No.: T210503N04-RP1 Ref. No.: Rev.: 00 APPENDIX I - PHOTOGRAPHS OF TEST SETUP RADIATED EMISSION MEASUREMENT SETUP(Below 1G) Page: 37 / 39 Report No.: T210503N04-RP1 Ref. No.: Rev.: 00 Page: 38 / 39 Report No.: T210503N04-RP1 Ref. No.: Rev.: 00 RADIATED RF MEASUREMENT SETUP(Above 1G) Page: 39 / 39 Report No.: T210503N04-RP1 Ref. No.: Rev.: 00