FCCID.CO- FCC ID Database
HomeCompaniesEquipment ClassesSearch

© 2026 FCC ID Database. All rights reserved.

AboutContactData sourced from FCC public records
  1. Home/
  2. Nokia Solutions and Networks/
  3. L7KWTPA-01

L7KWTPA-01GSM 1900 Transceiver

Nokia Solutions and Networks

Application Details

Equipment Class
PCB - PCS Licensed Transmitter
Date of Grant
Feb 13, 2003
Application Purpose
Original Equipment
Date of Application
Feb 13, 2003
Equipment Note
GSM 1900 Transceiver
Frequency Range
1930.00000000 - 1990.00000000
Company
Nokia Solutions and Networks
Country
United States

Documents & Files

Select a file to view

Users Manual

↗
↗
↗
↗
↗
↗
↗
↗
↗
↗
↗

Cover Letter(s)

↗
↗
↗

External Photos

↗

ID Label/Location Info

↗

Internal Photos

↗

Parts List/Tune Up Info

↗

Test Report

↗
↗

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

Nokia MetroSite EDGE Base Station DN00112232© Nokia CorporationDraft1 (26) Issue 3-0 enNokia Proprietary and Confidential Alarm Descriptions Alarm Descriptions 2 (26)© Nokia CorporationDraftDN00112232 Nokia Proprietary and ConfidentialIssue 3-0 en The information in this documentation is subject to change without notice and describes only the product defined in the introduction of this documentation. This documentation is intended for the use of Nokia's customers only for the purposes of the agreement under which the documentation is submitted, and no part of it may be reproduced or transmitted in any form or means without the prior written permission of Nokia. The documentation has been prepared to be used by professional and properly trained personnel, and the customer assumes full responsibility when using it. Nokia welcomes customer comments as part of the process of continuous development and improvement of the documentation. The information or statements given in this documentation concerning the suitability, capacity, or performance of the mentioned hardware or software products cannot be considered binding but shall be defined in the agreement made between Nokia and the customer. However, Nokia has made all reasonable efforts to ensure that the instructions contained in the documentation are adequate and free of material errors and omissions. Nokia will, if necessary, explain issues which may not be covered by the documentation. Nokia's liability for any errors in the documentation is limited to the documentary correction of errors. NOKIA WILL NOT BE RESPONSIBLE IN ANY EVENT FOR ERRORS IN THIS DOCUMENTATION OR FOR ANY DAMAGES, INCIDENTAL OR CONSEQUENTIAL (INCLUDING MONETARY LOSSES), that might arise from the use of this documentation or the information in it. This documentation and the product it describes are considered protected by copyright according to the applicable laws. NOKIA logo is a registered trademark of Nokia Corporation. Other product names mentioned in this documentation may be trademarks of their respective companies, and they are mentioned for identification purposes only. Copyright © Nokia Corporation 2002. All rights reserved. DN00112232© Nokia CorporationDraft3 (26) Issue 3-0 enNokia Proprietary and Confidential Hereby, Nokia Corporation, declares that this product is in compliance with the essential requirements and other relevant provisions of Directive: 1999/5/EC. The product is marked with the CE marking and Notified Body number according to the Directive 1999/5/EC. FCCFCC §15.21 - Information to user - This product is used as an intentional radiated equipment and any changes or modifications on the equipment without any approval by Nokia could void the user's authority to operate the equipment. FCC §15.105 - Information to user - This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/TV technician for help. 0523 Alarm Descriptions 4 (26)© Nokia CorporationDraftDN00112232 Nokia Proprietary and ConfidentialIssue 3-0 en DN00112232© Nokia CorporationDraft5 (26) Issue 3-0 enNokia Proprietary and Confidential Contents Contents 5 List of tables 6 List of figures 7 1About this document 9 2BTS alarm handling 11 2.1Alarm examples11 2.1.1Alarms seen at the BSC or NMS11 2.1.2Alarms seen at the BTS13 2.2Troubleshooting faults13 2.3Fault reporting14 2.4Alarm reclassification14 3BTS alarm descriptions 17 3.1Using an alarm description table17 3.2Alarm description tables18 Alarm Descriptions 6 (26)© Nokia CorporationDraftDN00112232 Nokia Proprietary and ConfidentialIssue 3-0 en List of tables Table 1.Description of the fields in the alarm description table17 Table 2.7208 LOCAL BLOCK18 Table 3.7401 EXTERNAL ALARM 7401-7410, EXTERNAL ALARM 1-1018 Table 4.7600 BCF FAULTY19 Table 5.7601 BCF OPERATION DEGRADED19 Table 6.7602 BCF NOTIFICATION20 Table 7.7603 BTS FAULTY21 Table 8.7604 BTS OPERATION DEGRADED21 Table 9.7605 BTS NOTIFICATION22 Table 10. 7606 TRX FAULTY22 Table 11. 7607 TRX OPERATION DEGRADED23 Table 12. 7609 TRE FAULTY23 Table 13. 7615 RTS IN TEST USE24 Table 14. 7616 OSCILLATOR ADJUSTMENT TEMPORARILY INTERRUPTED24 Table 15. 7617 SEVERAL CALLS DROPPED DUE PROBLEM WITH TRANSCODER24 Table 16. 7620 INCOMING POWER LOST25 Table 17. 7621 INTOLERABLE CONDITIONS ON SITE25 Table 18. 7622 CABINET OPEN26 Table 19. 7801 MMI CONNECTED TO BASE STATION26 DN00112232© Nokia CorporationDraft7 (26) Issue 3-0 enNokia Proprietary and Confidential List of figures Figure 1.Example 1, active alarms as seen at the BSC12 Figure 2.Example 2, active alarm as seen at the BSC12 Figure 3.Alarms view on Nokia MetroSite BTS Manager desktop13 Figure 4.Faulty and degraded object alarm reclassification15 Alarm Descriptions 8 (26)© Nokia CorporationDraftDN00112232 Nokia Proprietary and ConfidentialIssue 3-0 en About this document DN00112232© Nokia CorporationDraft9 (26) Issue 3-0 enNokia Proprietary and Confidential Note 1About this document This document provides information on the Nokia MetroSite EDGE Base Station alarms. The alar…

Text truncated - open the document above for the full version.

Users Manual

Nokia MetroSite EDGE Base Station DN999099© Nokia CorporationDraft1 (78) Issue 4-0 enNokia Proprietary and Confidential Commissioning Commissioning 2 (78)© Nokia CorporationDraftDN999099 Nokia Proprietary and ConfidentialIssue 4-0 en The information in this documentation is subject to change without notice and describes only the product defined in the introduction of this documentation. This documentation is intended for the use of Nokia's customers only for the purposes of the agreement under which the documentation is submitted, and no part of it may be reproduced or transmitted in any form or means without the prior written permission of Nokia. The documentation has been prepared to be used by professional and properly trained personnel, and the customer assumes full responsibility when using it. Nokia welcomes customer comments as part of the process of continuous development and improvement of the documentation. The information or statements given in this documentation concerning the suitability, capacity, or performance of the mentioned hardware or software products cannot be considered binding but shall be defined in the agreement made between Nokia and the customer. However, Nokia has made all reasonable efforts to ensure that the instructions contained in the documentation are adequate and free of material errors and omissions. Nokia will, if necessary, explain issues which may not be covered by the documentation. Nokia's liability for any errors in the documentation is limited to the documentary correction of errors. NOKIA WILL NOT BE RESPONSIBLE IN ANY EVENT FOR ERRORS IN THIS DOCUMENTATION OR FOR ANY DAMAGES, INCIDENTAL OR CONSEQUENTIAL (INCLUDING MONETARY LOSSES), that might arise from the use of this documentation or the information in it. This documentation and the product it describes are considered protected by copyright according to the applicable laws. NOKIA logo is a registered trademark of Nokia Corporation. Other product names mentioned in this documentation may be trademarks of their respective companies, and they are mentioned for identification purposes only. Copyright © Nokia Corporation 2002. All rights reserved. DN999099© Nokia CorporationDraft3 (78) Issue 4-0 enNokia Proprietary and Confidential Hereby, Nokia Corporation, declares that this product is in compliance with the essential requirements and other relevant provisions of Directive: 1999/5/EC. The product is marked with the CE marking and Notified Body number according to the Directive 1999/5/EC. FCCFCC §15.21 - Information to user - This product is used as an intentional radiated equipment and any changes or modifications on the equipment without any approval by Nokia could void the user's authority to operate the equipment. FCC §15.105 - Information to user - This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/TV technician for help. 0523 Commissioning 4 (78)© Nokia CorporationDraftDN999099 Nokia Proprietary and ConfidentialIssue 4-0 en DN999099© Nokia CorporationDraft5 (78) Issue 4-0 enNokia Proprietary and Confidential Contents Contents 5 List of tables 7 List of figures 8 1About this document 13 2Commissioning software overview 15 2.1Nokia SiteWizard 3.015 2.1.1Nokia BTS Manager 3.016 3Preparing for commissioning 19 4Getting started with BTS Manager 21 4.1Installing Nokia BTS Manager21 4.2Setting up Nokia BTS Manager21 4.2.1Nokia BTS Manager main windows22 4.2.2Defining Nokia BTS Manager options24 4.3Nokia BTS Manager Help24 5Commissioning Wizard process 27 5.1How to use Commissioning Wizard27 5.2Commissioning with Commissioning Wizard28 6Traffic Manager 41 6.1Allocating transmission capacity42 6.1.1Allocating Abis transmission capacity42 6.1.2Allocating transmission capacity for chaining45 6.1.3Allocating for EDGE dynamic Abis transmission48 6.1.4Completing the transmission allocations50 6.2Signal types51 7Line interface and synchronization settings 53 7.1Line interface settings53 7.1.1LIF settings for F(X)C E1/T1 transmission units53 7.1.2LIF settings for F(X)C RRI transmission units54 7.2Synchronization settings55 7.2.1Synchronization settings for F(X)C E1/T1 transmission units55 7.2.2Synchronization settings for FXC RRI transmission units56 8Radio Wizard 59 9Cross-connections 67 9.1Creating cross-connections67 10Commissioning Report 71 Commissioning 6 (78)© Nokia CorporationDraftDN999099 Nokia Proprietary and ConfidentialIssue 4-0 en 11Troubleshooting and fault reporting 73 Appendix A. LMP connector description 75 Index 77 DN999099© Nokia CorporationDraft7 (78) Issue 4-0 enNokia Proprietary and Confidential List of tables Table 1.Main features of the Commissioning Wizard in Nokia BTS Manager, version 3.016 Commissioning 8 (78)© Nokia CorporationDraftDN999099 Nokia Proprietary and ConfidentialIssue 4-0 en List of figures Figure 1.Nokia BTS Manager - main window23 Figure 2.Supervision - Equipment View window when two MetroSite EDGE BTSs are chained as one BCF object24 Figure 3.‘BCF is commissioning’ symbol27 Figure 4.Openi…

Text truncated - open the document above for the full version.

Users Manual

Nokia MetroSite EDGE Base Station DN00187365© Nokia CorporationDraft1 (50) Issue 2-0 enNokia Proprietary and Confidential Field Upgrade Field Upgrade 2 (50)© Nokia CorporationDraftDN00187365 Nokia Proprietary and ConfidentialIssue 2-0 en The information in this documentation is subject to change without notice and describes only the product defined in the introduction of this documentation. This documentation is intended for the use of Nokia's customers only for the purposes of the agreement under which the documentation is submitted, and no part of it may be reproduced or transmitted in any form or means without the prior written permission of Nokia. The documentation has been prepared to be used by professional and properly trained personnel, and the customer assumes full responsibility when using it. Nokia welcomes customer comments as part of the process of continuous development and improvement of the documentation. The information or statements given in this documentation concerning the suitability, capacity, or performance of the mentioned hardware or software products cannot be considered binding but shall be defined in the agreement made between Nokia and the customer. However, Nokia has made all reasonable efforts to ensure that the instructions contained in the documentation are adequate and free of material errors and omissions. Nokia will, if necessary, explain issues which may not be covered by the documentation. Nokia's liability for any errors in the documentation is limited to the documentary correction of errors. NOKIA WILL NOT BE RESPONSIBLE IN ANY EVENT FOR ERRORS IN THIS DOCUMENTATION OR FOR ANY DAMAGES, INCIDENTAL OR CONSEQUENTIAL (INCLUDING MONETARY LOSSES), that might arise from the use of this documentation or the information in it. This documentation and the product it describes are considered protected by copyright according to the applicable laws. NOKIA logo is a registered trademark of Nokia Corporation. Other product names mentioned in this documentation may be trademarks of their respective companies, and they are mentioned for identification purposes only. Copyright © Nokia Corporation 2002. All rights reserved. DN00187365© Nokia CorporationDraft3 (50) Issue 2-0 enNokia Proprietary and Confidential Hereby, Nokia Corporation, declares that this product is in compliance with the essential requirements and other relevant provisions of Directive: 1999/5/EC. The product is marked with the CE marking and Notified Body number according to the Directive 1999/5/EC FCCFCC §15.21 - Information to user - This product is used as an intentional radiated equipment and any changes or modifications on the equipment without any approval by Nokia could void the user's authority to operate the equipment. FCC §15.105 - Information to user - This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/TV technician for help. 0523 Field Upgrade 4 (50)© Nokia CorporationDraftDN00187365 Nokia Proprietary and ConfidentialIssue 2-0 en DN00187365© Nokia CorporationDraft5 (50) Issue 2-0 enNokia Proprietary and Confidential Contents Contents 5 List of tables 7 List of figures 8 1Overview of field upgrade 9 1.1GSM to GSM/EDGE upgrade9 1.1.1Working order for GSM/EDGE upgrade9 1.1.2Working order for 1W TRX power upgrade10 1.2Capacity upgrade by BTS chaining11 1.2.1Working order for a MetroSite EDGE BTS chaining upgrade11 2Preparing for upgrade 13 2.1Power supply precautions13 2.2Checking warnings and cautions14 2.3Checking the upgrade deliveries15 2.3.1Parts required for a GSM/EDGE upgrade15 2.3.2Parts required for a BTS chaining upgrade15 2.4Checking the site for an upgrade16 2.4.1Checking environmental conditions on the site16 2.5Checking the installation equipment17 2.6Removing the BTS cover17 2.7ESD protection18 3Replacing the power supply unit 21 3.1PSU removal21 3.2PSU installation23 4Replacing the cooling fan 25 4.1Removing the VMFA cooling fan25 4.2Installing the HVMF high capacity cooling fan28 5Replacing or installing new TRX units 31 5.1Upgrading by replacing TRXs32 5.1.1Removing TRX units32 5.1.2Installing TRX units34 5.2Upgrading capacity by adding TRXs35 6Chaining Nokia MetroSite EDGE BTSs 37 6.1Setting up a chaining connection39 7Commissioning for upgrade 41 7.1Commissioning the BTS for GSM/EDGE42 7.2Commissioning the BTS chain42 8Completing the upgrade 45 Field Upgrade 6 (50)© Nokia CorporationDraftDN00187365 Nokia Proprietary and ConfidentialIssue 2-0 en Index 49 DN00187365© Nokia CorporationDraft7 (50) Issue 2-0 enNokia Proprietary and Confidential List of tables Table 1.Power supply rules during BTS upgrade or maintenance procedures14 Table 2.Parts required for a GSM/EDGE upgrade on the Nokia MetroSite EDGE Base Station15 Table 3.Tools and other equipment required for a field upgrade17 Table 4.PSU types used in MetroSite base stations21 Field Upgrade 8 (50)© Nokia CorporationDraftDN00187365 Nokia Proprietary and ConfidentialIssue 2-0 en List of figures Figure 1.Electro-static sensitive device symbol18 Figu…

Text truncated - open the document above for the full version.

Users Manual

Nokia MetroSite EDGE Base Station DN9913483© Nokia CorporationDraft1 (26) Issue 3-0 enNokia Proprietary and Confidential Glossary Glossary 2 (26)© Nokia CorporationDraftDN9913483 Nokia Proprietary and ConfidentialIssue 3-0 en The information in this documentation is subject to change without notice and describes only the product defined in the introduction of this documentation. This documentation is intended for the use of Nokia's customers only for the purposes of the agreement under which the documentation is submitted, and no part of it may be reproduced or transmitted in any form or means without the prior written permission of Nokia. The documentation has been prepared to be used by professional and properly trained personnel, and the customer assumes full responsibility when using it. Nokia welcomes customer comments as part of the process of continuous development and improvement of the documentation. The information or statements given in this documentation concerning the suitability, capacity, or performance of the mentioned hardware or software products cannot be considered binding but shall be defined in the agreement made between Nokia and the customer. However, Nokia has made all reasonable efforts to ensure that the instructions contained in the documentation are adequate and free of material errors and omissions. Nokia will, if necessary, explain issues which may not be covered by the documentation. Nokia's liability for any errors in the documentation is limited to the documentary correction of errors. NOKIA WILL NOT BE RESPONSIBLE IN ANY EVENT FOR ERRORS IN THIS DOCUMENTATION OR FOR ANY DAMAGES, INCIDENTAL OR CONSEQUENTIAL (INCLUDING MONETARY LOSSES), that might arise from the use of this documentation or the information in it. This documentation and the product it describes are considered protected by copyright according to the applicable laws. NOKIA logo is a registered trademark of Nokia Corporation. Other product names mentioned in this documentation may be trademarks of their respective companies, and they are mentioned for identification purposes only. Copyright © Nokia Corporation 2002. All rights reserved. DN9913483© Nokia CorporationDraft3 (26) Issue 3-0 enNokia Proprietary and Confidential Hereby, Nokia Corporation, declares that this product is in compliance with the essential requirements and other relevant provisions of Directive: 1999/5/EC. The product is marked with the CE marking and Notified Body number according to the Directive 1999/5/EC FCCFCC §15.21 - Information to user - This product is used as an intentional radiated equipment and any changes or modifications on the equipment without any approval by Nokia could void the user's authority to operate the equipment. FCC §15.105 - Information to user - This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/TV technician for help. 0523 Glossary 4 (26)© Nokia CorporationDraftDN9913483 Nokia Proprietary and ConfidentialIssue 3-0 en DN9913483© Nokia CorporationDraft5 (26) Issue 3-0 enNokia Proprietary and Confidential Contents Contents 5 List of tables 6 1Abbreviations 9 2Terms 21 Glossary 6 (26)© Nokia CorporationDraftDN9913483 Nokia Proprietary and ConfidentialIssue 3-0 en List of tables DN9913483© Nokia CorporationDraft7 (26) Issue 3-0 enNokia Proprietary and Confidential Summary of Changes Version 1-0, 12 th November 1999. Version 2-0, 2 nd June 2000: •changed title •added CE marking •included HP units’ abbreviations (HVFM, HVSA/B/D, HVTD/G/P) Version 3-0, 30 th June 2001: •updated for EDGE Glossary 8 (26)© Nokia CorporationDraftDN9913483 Nokia Proprietary and ConfidentialIssue 3-0 en Abbreviations DN9913483© Nokia CorporationDraft9 (26) Issue 3-0 enNokia Proprietary and Confidential 1Abbreviations 8-PSK 8 Phase Shift Keying AC Alternating Current AD Analog/Digital AGC Automatic Gain Control ANSI American National Standards Institute ARFCN Absolute Radio Frequency Channel Number ARFN SeeARFCN. ASIC Application Specific Integrated Circuit BCCH Broadcast Control Channel BCF Base Control Function Glossary 10 (26)© Nokia CorporationDraftDN9913483 Nokia Proprietary and ConfidentialIssue 3-0 en BER Bit Error Ratio BSC Base Station Controller BSS Base Station System BTS Base Transceiver Station CCCH Common Control Channel CCITT Comité Consultatif International Télégraphique et Téléphonique CH Channel CHDSP Channel Coding and Decoding Signal Processor D/A Digital/Analog dBi Generally refers to a theoretical antenna having a spherical radiation pattern with equal gain in all directions. An isotropic antenna has gain of 0 dBi. DC Direct Current DDS Direct Digital Synthesis DGND Digital ground Abbreviations DN9913483© Nokia CorporationDraft11 (26) Issue 3-0 enNokia Proprietary and Confidential DIP Dual In Parallel DL (Downlink) The direction of transmission in which the BTS is the transmitting facility and the mobile station is the receiving facility. DMR Digital Microwave Radio DSP Digital Signal Processor EAC External Alarms and Controls ED…

Text truncated - open the document above for the full version.

Users Manual

Nokia MetroSite EDGE Base Station DN9990375© Nokia CorporationDraft1 (22) Issue 3 enNokia Proprietary and Confidential Guide to Documentation Guide to Documentation 2 (22)© Nokia CorporationDraftDN9990375 Nokia Proprietary and ConfidentialIssue 3 en The information in this documentation is subject to change without notice and describes only the product defined in the introduction of this documentation. This documentation is intended for the use of Nokia's customers only for the purposes of the agreement under which the documentation is submitted, and no part of it may be reproduced or transmitted in any form or means without the prior written permission of Nokia. The documentation has been prepared to be used by professional and properly trained personnel, and the customer assumes full responsibility when using it. Nokia welcomes customer comments as part of the process of continuous development and improvement of the documentation. The information or statements given in this documentation concerning the suitability, capacity, or performance of the mentioned hardware or software products cannot be considered binding but shall be defined in the agreement made between Nokia and the customer. However, Nokia has made all reasonable efforts to ensure that the instructions contained in the documentation are adequate and free of material errors and omissions. Nokia will, if necessary, explain issues which may not be covered by the documentation. Nokia's liability for any errors in the documentation is limited to the documentary correction of errors. NOKIA WILL NOT BE RESPONSIBLE IN ANY EVENT FOR ERRORS IN THIS DOCUMENTATION OR FOR ANY DAMAGES, INCIDENTAL OR CONSEQUENTIAL (INCLUDING MONETARY LOSSES), that might arise from the use of this documentation or the information in it. This documentation and the product it describes are considered protected by copyright according to the applicable laws. NOKIA logo is a registered trademark of Nokia Corporation. Other product names mentioned in this documentation may be trademarks of their respective companies, and they are mentioned for identification purposes only. Copyright © Nokia Corporation 2002. All rights reserved. DN9990375© Nokia CorporationDraft3 (22) Issue 3 enNokia Proprietary and Confidential Hereby, Nokia Corporation, declares that this product is in compliance with the essential requirements and other relevant provisions of Directive: 1999/5/EC. The product is marked with the CE marking and Notified Body number according to the Directive 1999/5/EC FCCFCC §15.21 - Information to user - This product is used as an intentional radiated equipment and any changes or modifications on the equipment without any approval by Nokia could void the user's authority to operate the equipment. FCC §15.105 - Information to user - This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/TV technician for help. 0523 Guide to Documentation 4 (22)© Nokia CorporationDraftDN9990375 Nokia Proprietary and ConfidentialIssue 3 en DN9990375© Nokia CorporationDraft5 (22) Issue 3 enNokia Proprietary and Confidential Contents Contents 5 List of tables 6 1About this document 9 1.1Other related documentation9 2Guide to Nokia MetroSite EDGE Base Station User Manual 11 2.1Navigation aid11 2.2Contents by documents12 2.3Ordering documents15 2.4Delivery media15 2.4.1Electronic documents15 2.4.2Paper documents15 2.5Conventions used in documents15 2.5.1User manual identification15 2.5.2Document identification16 2.5.3Typographic conventions16 2.6How to give feedback18 Appendix A. Feedback Form 19 Index 21 Guide to Documentation 6 (22)© Nokia CorporationDraftDN9990375 Nokia Proprietary and ConfidentialIssue 3 en List of tables Table 1.Navigation aid for the User Manual documents11 Table 2.Text type conventions in the User Manual documents17 Table 3.Document feedback form19 DN9990375© Nokia CorporationDraft7 (22) Issue 3 enNokia Proprietary and Confidential Summary of Changes Version 1, 12 th November 1999. Version 2, 2 nd June 2000 •changed title •added CE marking •added references about BBU UM, Field Upgrade and System Overview •added Accessories and Alarms Descriptions references to Chapter 2.2 •rearranged order of documents listed in Chapter 2.2 Version 3, 30 th June 2001: •updated for EDGE document set Guide to Documentation 8 (22)© Nokia CorporationDraftDN9990375 Nokia Proprietary and ConfidentialIssue 3 en About this document DN9990375© Nokia CorporationDraft9 (22) Issue 3 enNokia Proprietary and Confidential 1About this document This document describes the scope, structure, and use of the Nokia MetroSite EDGE Base Station (BTS) User Manual which is also a subset of Nokia MetroSite solution documentation. This document describes the generic customer documents which are produced by the Nokia MetroSite EDGE Base Station manufacturer. Customer-specific documents are not described here. This document is a source for the following information: •navigation aid for finding the desired information •general contents …

Text truncated - open the document above for the full version.

Contact Information

Applicant

Steve Mitchell
[email protected]972-936-7500Fax: 972-936-7273

Technical Contact

Nokia UK LtdAndrew Parry
[email protected]+44 1276 603634

Stanhope Road · Surrey · United Kingdom

Non-Technical Contact

Nokia UK LtdAndrew Parry
[email protected]+44 1276 603634

Test Firm

TUV SUD Product ServiceJensen Adams
[email protected]44-1489-558252Fax: 44-11489-558101

Technical Specifications

#Rule PartsFrequency RangePower OutputEmissionTolerance
224E1.93 GHz - 1.99 GHz3.16 W347KGXW1000 ppm
Confidentiality
Long Term
Grant Notes
The Power Output is listed at the antenna terminals; the higher output represents the equipment in GMSK mode; the lower in 8PSK mode. The antenna(s) used with this transmitter must be fix-mounted. This transmitter must only be operated in the grantees Model MetroSite Edge Base Transceiver Station. This transmitter may be operated in conjunction with up to 3 transmitters with FCC id L7KWTPA-01 and up to 3 transmitters with FCC id L7KWTFA-01 subject to a maximum of 4 transmitters within the same housing. RF exposure compliance is addressed at the time of licencing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of Section 1.1307(b)(3) . End-users, maintenance staff, and installers must be provided with antenna installation and transmitting operating conditions for satisfying RF exposure compliance. Subject to FCC regulations 2.1046 and 24.232 - This certificate has been granted on the condition that the following channels are blocked and not used for radio communications using either GSM or EDGE modulation schemes: Channels 512, 585-587, 610-612, 685-687, 710-712, 735-737, and 810.

Other Applications from Nokia Solutions and Networks

PCS Base Station Transceiver - FCC ID L7KWTRC-01 - Nokia Solutions and Networks
L7KWTRC-01

PCS Base Station Transceiver

Jul 28, 2004

Equipment Class

PCB - PCS Licensed Transmitter
GSM 800 Transciever - FCC ID L7KWTFA-01 - Nokia Solutions and Networks
L7KWTFA-01

GSM 800 Transciever

Feb 13, 2003

Equipment Class

TNB - Licensed Non-Broadcast Station Transmitter
UltraSite EDGE Base Transceiver Station - FCC ID L7KTSPB-01 - Nokia Solutions and Networks
L7KTSPB-01

UltraSite EDGE Base Transceiver Station

Oct 30, 2001

Equipment Class

PCB - PCS Licensed Transmitter
UltraSite EDGE Base Transceiver Station - FCC ID L7KTSTB-01 - Nokia Solutions and Networks
L7KTSTB-01

UltraSite EDGE Base Transceiver Station

Oct 30, 2001

Equipment Class

TNB - Licensed Non-Broadcast Station Transmitter
InLite Dual Band Enhancer Remote Unit - FCC ID L7KINLITERU-01 - Nokia Solutions and Networks
L7KINLITERU-01

InLite Dual Band Enhancer Remote Unit

Oct 11, 2001

Equipment Class

AMP - Amplifier