LJL123456TRemote Control Transmitter

Regulatory Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the fol-lowing two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any modification or changes not expressly approved by the manufacturer wil void the users authority to operate the equipment Information to the user:

FCC ID: JLJ123456T

Page 1 of 47 Pages

  
   Straubing, August 3, 2000 T E S T - R E P O R T No. 52209-00390-1 for TOAD RK 30 Transmitter Applicant:Lite-On Automotive Corporation Purpose of testing:To show compliance with FCC Code of Federal Regulations, Part 15 Subpart C, Section §15.231 Industry Canada Radio Standards Specification RSS-210 Issue 2, Section 6.1 (Category I Equipment) Note: The test data of this report relate only to the individual item which has been tested. This report shall not be reproduced except in full extent without the written approval of the testing laboratory. FCC ID: JLJ123456T Test Report No. 52209-00390-1 Page 2 of 47 Pages

  
   Table of Contents 1. Administrative Data ............................................................................................. 3 2. Identification of Test Laboratory.......................................................................... 4 3. Summary of Test Results .................................................................................... 5 4. Operation Mode of EUT ...................................................................................... 6 5. Configuration of EUT and Peripheral Devices..................................................... 7 6. Measuring Methods............................................................................................. 8 6.1. Bandwidth of Emission(FCC §15.231.c / RSS-210 Section 6.1.1.c) ......................................................................................................... 8 6.2. Radiated Emission 30 MHz - 1 GHz (FCC §15.205.a,b, §15.209, §15.231.b / RSS-210 Sections 6.1.1.b, 6.3).................................. 9 6.3. Radiated Emission 1 GHz - 10 GHz (FCC §15.205.a,b, §15.209, §15.231.b / RSS-210 Sections 6.1.1.b, 6.3)................................ 11 7. Equipment List .................................................................................................. 13 8. Photographs Taken During Testing................................................................... 15 9. List of Measurements ........................................................................................ 20 9.1. List of Measurements According To FCC Part 15 Subpart C ..................... 21 9.2. List of Measurements According To Industry Canada RSS- 210 22 10. Referenced Regulations.................................................................................... 23 11. Test Results ...................................................................................................... 24 FCC ID: JLJ123456T Test Report No. 52209-00390-1 Page 3 of 47 Pages

  
   1.Administrative Data Equipment Under Test (EUT):TOAD RK 30 Transmitter Serial number(s):R 118825 Version of EUT:as received with modifications Parts/accessories:--- FCC-ID:JLJ123456T Applicant:Lite-On Automotive Corporation (full address)37 Chung Yang Road NEPZ Kaohsiung 811 Taiwan R.O.C. Contract identification:--- Contact person: Manufacturer:Lite-On Automotive Corporation Receipt of EUT:July 2000 Date of test:July/August 2000 Note:--- Responsible for testing:Rupert Kohlhäufl Responsible for test report:Rupert Kohlhäufl (cj) FCC ID: JLJ123456T Test Report No. 52209-00390-1 Page 4 of 47 Pages

  
   2.Identification of Test Laboratory Test Laboratory:Senton GmbH EMI/EMC Test Center (full address):Aeussere Fruehlingstrasse 45 D-94315 Straubing Germany Contact person:Mr. Johann Roidt Communication:Telephone(+49) 0 94 21 / 55 22-0 Fax (+49) 0 94 21 / 55 22-99 eMail:[email protected] FCC file number:31040/SIT 1300F2 Industry Canada file number:IC 3050 FCC ID: JLJ123456T Test Report No. 52209-00390-1 Page 5 of 47 Pages

  
   3.Summary of Test Results The tested sample complies with the requirements set forth in the Code of Regulations Part 15 Subpart C, Section §15.231 (intentional radiators) of the Federal Communication Commission (FCC) and the Radio Standards Specification RSS-210 Issue 2, Section 6.1 for Low Power Licence-Exempt Radiocommuniction Devices of Industry Canada. Johann RoidtRupert Kohlhäufl Technical ManagerTest Engineer FCC ID: JLJ123456T Test Report No. 52209-00390-1 Page 6 of 47 Pages

  
   4.Operation Mode of EUT - transmitting continuously - with battery supply 3.0 V DC FCC ID: JLJ123456T Test Report No. 52209-00390-1 Page 7 of 47 Pages

  
   5.Configuration of EUT and Peripheral Devices Configuration of cables of EUT Not applicable Configuration of peripheral devices connected to EUT Not applicable FCC ID: JLJ123456T Test Report No. 52209-00390-1 Page 8 of 47 Pages

  
   6.Measuring Methods 6.1.Bandwidth of Emission(FCC §15.231.c / RSS-210 Section 6.1.1.c) The Bandwidth of Emission is measured with a spectrum analyzer connected to measuring antenna (radiated measurement) or test fixture while EUT is operating in transmit mode with modulation at the appropriate center frequency. To increase received signal level distance to EUT is reduced (appropriate level offset is included). The spectrum analyzer was set to: RBW = 10 kHz, VBW = 10 kHz, span = 1 MHz, sweep = 40 ms See figure 1 for the measurement setup. Test equipment used (see equipment list for details): 02, 55, 67 5 2 1 4 3 Figure 1: Measurement setup for bandwidth of emission test 1Transmitter (EUT)3Test fixture 2Wooden table4Test cable 5Spectrum analyzer FCC ID: JLJ123456T Test Report No. 52209-00390-1 Page 9 of 47 Pages

  
   6.2.Radiated Emission 30 MHz - 1 GHz (FCC §15.205.a,b, §15.209, §15.231.b / RSS-210 Sections 6.1.1.b, 6.3) Radiated emissions are measured over the frequency range from 30 MHz to 1 GHz. The bandwidth of the EMI-receiver is set to 120 kHz and the detector-function is set to CISPR quasi-peak. The test setup is made in accordance with ANSI C63.4-1992. Measurements are made in both the horizontal and vertical planes of polarization…

Text truncated - open the document above for the full version.