LLINCT525Cube Network Camera

HD Mini Cube Network Camera INSTRUCTION MANUAL Please read this manual thoroughly before use, and keep it handy for future reference. 2 WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PROCUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. CAUTION EXPLANATION OF GRAPHICAL SYMBOLS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. PRECAUTIONS Safety -------------------------------------- Installation ------------------------------- Should any liquid or solid object fall into the cabinet, unplug the unit and have it checked by the qualified personnel before operating it any further. Unplug the unit from the wall outlet if it is not going to be used for several days or more. To disconnect the cord, pull it out by the plug. Never pull the cord itself. Allow adequate air circulation to prevent internal heat build-up. Do not place the unit on surfaces (rugs, blankets, etc.) or near materials(curtains, draperies) that may block the ventilation holes. Height and vertical linearity controls located at the rear panel are for special adjustments by qualified personnel only. Do not install the unit in an extremely hot or humid place or in a place subject to excessive dust, mechanical vibration. The unit is not designed to be waterproof. Exposure to rain or water may damage the unit. Cleaning --------------------------------- Clean the unit with a slightly damp soft cloth. Use a mild household detergent. Never use strong solvents such as thinner or benzene as they might damage the finish of the unit. Retain the original carton and packing materials for safe transport of this unit in the future. 3 FCC COMPLIANCE STATEMENT FCC INFORMATION : THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS B DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE IN A RESIDENTIAL INSTALLATION. THIS EQUIPMENT GENERATES, USES AND CAN RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTIONS, MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS. HOWEVER, THERE IS NO GUARANTEE THAT INTERFERENCE WILL NOT OCCUR IN A PARTICULAR INSTALLATION. IF THIS EQUIPMENT DOES CAUSE HARMFUL INTERFERENCE TO RADIO OR TELEVISOION RECEPTION, WHICH CAN BE DETERMINED BY TURNING THE EQUIPMENT OFF AND ON, THE USER IS ENCOURAGED TO TRY TO CORRECT THE INTERFERENCE BY ONE OR MORE OF THE FOLLOWING MEASURES: -- REORIENT OR RELOCATE THE RECEIVING ANTENNA. -- INCREASE THE SEPARATION BETWEEN THE EQUIPMENT AND RECEIVER. -- CONNECT THE EQUIPMENT INTO AND OUTLET ON A CIRCUIT DIFFERENT FROM THAT TO WHICH THE RECEIVER IS CONNECTED. -- CONSULT THE DEALER OR AND EXPERIENCED RADIO/TV TECHNICIAN FOR HELP CAUTION: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003. CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST CONFORME À LA NORME NMB-003 DU CANADA. TO COMPLY WITH RF EXPOSURE COMPLIANCE REQUIREMENTS, THE ANTENNA USED FOR THIS TRANSMITTER MUST BE INSTALLED TO PROVIDE A SEPARATION DISTANCE OF AT LEAST 20cm (7.9in) FROM ALL PERSONS AND MUST NOT BE CO-LOCATED OR OPERATING IN CONJUNCTION WITH ANY OTHER ANTENNA OR TRANSMITTER. 4 THIS DIGITAL EQUIPMENT FULFILLS THE REQUIREMENTS FOR RF EMISSION ACCORDING TO THE CLASS B LIMIT OF EN 55022. THIS PRODUCT FULFILLS THE REQUIREMENTS FOR IMMUNITY ACCORDING TO EN 55024 OFFICE AND COMMERCIAL ENVIRONMENTS. HEREBY, HITRON SYSTEMS DECLARES THAT THIS PRODUCT IS IN COMPLIANCE WITH THE ESSENTIAL REQUIREMENTS AND OTHER RELEVANT PROVISIONS OF DIRECTIVE 1999/5/EC. A COPY OF THE ORIGINAL DECLARATION OF CONFORMITY MAY BE OBTAINED FROM HITRON SYSTEMS, 5953-85, SEODONG-DAERO, SAMJUG-MYEON, ANSEONG-SI, GYEONGGI-DO, KOREA TO COMPLY WITH RF EXPOSURE COMPLIANCE REQUIREMENTS, THE ANTENNA USED FOR THIS TRANSMITTER MUST BE INSTALLED TO PROVIDE A SEPARATION DISTANCE OF AT LEAST 20cm (7.9in) FROM ALL PERSONS AND MUST NOT BE CO-LOCATED OR OPERATING IN CONJUNCTION WITH ANY OTHER ANTENNA OR TRANSMITTER. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. 5 IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the ca…

Text truncated - open the document above for the full version.

HITRON SYSTEMS INC. 5953-85, SEODONG-DAERO, SAMJUG-MYEON, ANSEONG-SI, GYEONGGI-DO, KOREA TEL: +82-31-670-9087, FAX: +82-31-674-4318 http://www.hitron.co.kr/ December 4, 2012 Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD21046 RE: LETTER OF AGENT AUTHORIZATION We, the undersigned, hereby authorize SK TECH Co., Ltd.(Mr. Jongsoo, Yoon) to act on our behalf in all matters relating to application for equipment authorization. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). APPLICANT/AGENT CERTIFICATION AND AGREEMENT: All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization issued by the TCB, under the authority of the FCC, as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. Authorizing an agent to sign this application, is done solely at the applicant’s discretion; however, the applicant remains responsible for all statements in this application. Sincerely, Seong-kon, Kim/ General Manager

HITRON SYSTEMS INC. 5953-85, SEODONG-DAERO, SAMJUG-MYEON, ANSEONG-SI, GYEONGGI-DO, KOREA TEL: +82-31-670-9087, FAX: +82-31-674-4318 http://www.hitron.co.kr/ December 4, 2012 Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD21046 TO WHOM IT MAY CONCERN ATTESTATION: We, the undersigned, would like to declare that the composite portion categorized as Class B digital device has been authorized under the Verification procedure. FCC ID Number Product Description (Model) LLINCT525 Cube Network Camera(NCT-5251) Sincerely, Seong-kon, Kim/ General Manager

HITRON SYSTEMS INC. 5953-85, SEODONG-DAERO, SAMJUG-MYEON, ANSEONG-SI, GYEONGGI-DO, KOREA TEL: +82-31-670-9087, FAX: +82-31-674-4318 http://www.hitron.co.kr/ December 4, 2012 Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD21046 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission's Rules (47 C.F.R) and Section §552(b)(4) of the Freedom of Information Act, HITRON SYSTEMS INC. requests confidentiality for the following products: FCC ID Number Product Description (Model) LLINCT525 Cube Network Camera(NCT-5251) The requested Permanent and Short-Term Confidential exhibits art listed as follows: PERMANENT AND SHORT-TERM CONFIDENTIAL LIST Exhibit Description 1 Block Diagram 2 Operational Description 3 Schematics PERMANENT 4 Part List No other items submitted as part of the equipment authorization filing process are deemed confidential. The above exhibits contain HITRON SYSTEMS INC. trade secrets and proprietary information that could be of benefit to our competitors regarding the design of our products. This material is not customarily available to the general public and we request that it be withheld from public inspection. Sincerely, Seong-kon, Kim/ General Manager

SK TECH CO., LTD. Page 1 of 6 SKTRFC-121206-026 FCC ID: LLINCT525 External Photographs of EUT <Photograph 1: Front View> <Photograph 2: Rear View> SK TECH CO., LTD. Page 2 of 6 SKTRFC-121206-026 FCC ID: LLINCT525 <Photograph 3: Left-side View> <Photograph 4: Right-side View> SK TECH CO., LTD. Page 3 of 6 SKTRFC-121206-026 FCC ID: LLINCT525 <Photograph 5: Interface View – Micro SD card port> <Photograph 6: Interface View – DC input & Ethernet> SK TECH CO., LTD. Page 4 of 6 SKTRFC-121206-026 FCC ID: LLINCT525 <Photograph 9: AC/DC Adapter >

ID Label Location & Sample LABEL LOCATION: Label will be attached to the Bottom of the product LABEL Drawing:

SK TECH CO., LTD. Page 1 of 8 SKTRFC-121206-026 FCC ID: LLINCT525 Internal Photographs <Photograph 1: Cover removed> SK TECH CO., LTD. Page 2 of 8 SKTRFC-121206-026 FCC ID: LLINCT525 <Photograph 2: Main board - Front view> SK TECH CO., LTD. Page 3 of 8 SKTRFC-121206-026 FCC ID: LLINCT525 <Photograph 3: Main board - Rear view> SK TECH CO., LTD. Page 4 of 8 SKTRFC-121206-026 FCC ID: LLINCT525 <Photograph 5: WLAN module - Front view> SK TECH CO., LTD. Page 5 of 8 SKTRFC-121206-026 FCC ID: LLINCT525 <Photograph 5: WLAN module - Rear view> SK TECH CO., LTD. Page 6 of 8 SKTRFC-121206-026 FCC ID: LLINCT525 <Photograph 6: Antenna view> SK TECH CO., LTD. Page 7 of 8 SKTRFC-121206-026 FCC ID: LLINCT525 <Photograph 7: Micro SD Card board - Front view> SK TECH CO., LTD. Page 8 of 8 SKTRFC-121206-026 FCC ID: LLINCT525 <Photograph 8: Micro SD Card board - Rear view>

SK TECH CO., LTD. Page 1 of 42 SKTRFC-121206-026 FCC ID: LLINCT525 TEST REPORT Test Report No.: SKTRFC-121206-026 Applicant: HITRON SYSTEMS INC. Applicant Address: 5953-85, SEODONG-DAERO, SAMJUG-MYEON, ANSEONG-SI, GYEONGGI-DO, KOREA Manufacturer: HITRON SYSTEMS INC. Manufacturer Address: 5953-85, SEODONG-DAERO, SAMJUG-MYEON, ANSEONG-SI, GYEONGGI-DO, KOREA Device Under Test: Cube Network Camera FCC ID: LLINCT525 Model Name: NCT-5251 Variant Model Name: NCT-5221, NCT-2211, PNC-101S Brand/Trade Name: Receipt No.: SKTEU12-1560 Date of receipt: November 13, 2012 Date of Issue: December 6, 2012 Location of Testing: SK TECH CO., LTD. #820-2, Wolmoon-ri, Wabu-up, Namyangju-si, Kyunggi-do, 472-905 South Korea Test Procedure: ANSI C63.10-2009 and ANSI C63.4-2009, KDB 558074 D01 DTS Meas Guidance v02 Test Specification: 47CFR, FCC Part 15 Rules FCC Equipment Class: DTS - Part 15 Digital Transmission System Test Result: The above-mentioned device has been tested and passed. Tested & Reported by: Jungtae Kim December 6, 2012 Approved by: Jongsoo Yoon December 6, 2012 Signature Date Signature Date Other Aspects: - Abbreviations: · OK, Pass = passed · Fail = failed · N/A = not applicable ☞  This test report is not permitted to copy partly and entirely without our permission.  This test result is dependent on only equipment to be used.  This test result is based on a single evaluation of submitted samples of the above mentioned. SK TECH CO., LTD. Page 2 of 42 SKTRFC-121206-026 FCC ID: LLINCT525 >> CONTENTS << 1. GENERAL ···························································································4 2. TEST SITE ···························································································4 2.1 Location ·························································································4 2.2 List of Test and Measurement Instruments ·················································5 2.3 Test Date ·························································································5 2.4 Test Environment ···············································································5 3. DESCRIPTION OF THE EQUIPMENT UNDER TEST ··································6 3.1 Rating and Physical Characteristics ·························································6 3.2 Equipment Modifications ·····································································6 3.3 Submitted Documents ·········································································6 4. MEASUREMENT CONDITIONS ······························································7 4.1 Description of test configuration ·····························································7 4.2 List of Peripherals ··············································································7 4.3 Type of Used Cables ···········································································7 4.4 Uncertainty ······················································································7 5. TEST AND MEASUREMENTS ·································································8 5.1 ANTENNA REQUIREMENT ······························································8 5.1.1 Regulation ··················································································8 5.1.2 Result ·······················································································8 5.2 Test Configuration of Equipment Under Test ············································9 5.3 6dB BANDWIDTH ········································································· 10 5.3.1 Regulation ················································································ 10 5.3.2 Test Procedure ··········································································· 10 5.3.3 Test Results ·············································································· 10 Table 1: Measured values of the 6dB Bandwidth ·························································10 Figure 1: Plot of the 6dB Bandwidth ········································································· 11 5.4 MAXIMUM PEAK OUTPUT POWER ··············································· 13 5.4.1 Regulation ················································································ 13 5.4.2 Test Procedure ··········································································· 13 5.4.3 Test Results ·············································································· 13 Table 2: Measured values of the Maximum Peak Conducted Output Power ·························13 Figure 2: Plot of the Maximum Peak Conducted Output Power ·········································14 (Continued) SK TECH CO., LTD. Page 3 of 42 SKTRFC-121206-026 FCC ID: LLINCT525 5.5 SPURIOUS EMISSION, BAND EDGE, AND RESTRICTED BANDS ········· 16 5.5.1 Regulation ················································································ 16 5.5.2 Test Procedure ··········································································· 16 5.5.3 Test Results ·············································································· 18 Table 3: Measured values of the field strength of spurious emission (Radiated) ······················18 Figure 3: Plot of the Band Edge (Conducted) ······························································· 23 Figure 4: Plot of the Band Edge (Radiated) ·································································· 25 Figure 5: Spurious RF conducted emission ·································································· 29 Figure 6: Emission plot for the preliminary radiated measurements ·····································33 5.6 PEAK POWER SPECTRAL DENSITY ··············································· 36 5.6.1 Regulation ················································································ 36 5.6.2 Test Procedure ··········································································· 36 5.6.3 Test Results ···············…

Text truncated - open the document above for the full version.

SK TECH CO., LTD. Page 1 of 4 SKTRFC-121206-026 FCC ID: LLINCT525 Test set up photos <Radiated Emissions - Front View> <Radiated Emissions - Rear View> SK TECH CO., LTD. Page 2 of 4 SKTRFC-121206-026 FCC ID: LLINCT525 <Radiated Emissions - below 30 MHz> <Radiated Emissions - below 1 GHz> SK TECH CO., LTD. Page 3 of 4 SKTRFC-121206-026 FCC ID: LLINCT525 <Radiated Emissions - above 1 GHz> SK TECH CO., LTD. Page 4 of 4 SKTRFC-121206-026 FCC ID: LLINCT525 <AC Power Line Conducted Emissions - Front View> <AC Power Line Conducted Emissions - Rear View>