LNQ-WF815Tri-band Wi-Fi 6E Wireless AP

1 Notice: Actiontec has the sole right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time, and to discontinue any product or service without notice. Actiontec has the final interpretation. Tri-band Wi-Fi6E Router WF-815 Product Datasheet VERSION1.0 Mar, 2023 www.actiontec.com 2 Notice: Actiontec has the sole right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time, and to discontinue any product or service without notice. Actiontec has the final interpretation. ◼ Overview The tri-band Wi-Fi 6E WF-815 is designed to provide Wi-Fi network connectivity for homes and business based on the latest 802.11ax chipset design. With the WF-815, the user can utilize EasyMesh R4, which provides a self-configuring, self-healing and self-managing Wi-Fi network. It dynamically selects the most reliable Wi-Fi path and enables fast and seamless handoffs for end-users. WF-815 is one of the best performing WiFi 6E router in the market with up to 11Gbps aggregate throughput (AX11000). It supports 802.11ax on all Wi-Fi radio bands. The 2.4G radio supports 4x4 802.11b/g/n/ac/ax MIMO. The 5G radio supports 4x4 802.11a/n/ac/ax MIMO. The 6G radio supports 4x4 802.11a/ax MIMO WF- 815 can meet the requirements for high-speed real-time traffic and high-bandwidth entertainment, such as 4K video, video game streaming and VR. With global deployments in mind, the WF-815 utilized standard AC/DC adapter, allowing easy adaptation everywhere in every country. 3 Notice: Actiontec has the sole right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time, and to discontinue any product or service without notice. Actiontec has the final interpretation. ◼ Key Features ⚫ Desktop placement ⚫ Highest performance at 11Gbps aggregate throughput (AX7800) ⚫ 2.4GHz 40MHz 4x4 802.11b/g/n/ax ⚫ 5GHz 160MHz 4x4 802.11a/n/ac/ax ⚫ 6GHz 160MHz 4x4 802.11a/ax ⚫ WPA/WPA2-PSK(AES)/WPA3 ⚫ 8 x Integrated Wi-Fi antennas ⚫ 1 x 10GbE WAN ⚫ 1 x 10GbE LAN ⚫ 3 x 2.5GbE LAN ⚫ 4 x Status LED (multi-color) ⚫ 1 x USB3.0 type A ⚫ 1 x WPS button ⚫ 1 x Reset button ⚫ 1 x DC jack ⚫ Supports router/extender functions ⚫ Supports TR-069 management ⚫ Supports EasyMesh R4 4 Notice: Actiontec has the sole right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time, and to discontinue any product or service without notice. Actiontec has the final interpretation. ◼ Application Scenario ⚫ Three WF-815 and WF-810G can form a Wi-Fi mesh network. One configured as the Gateway and the other two configured as the Wi-Fi Extender: Internet Fiber / Ethernet Ethernet Gateway Extender Extender EasyMesh Network ◼ Software Features Category Features Network Bridge Mode - DHCP Client - Backhaul with 2.4G/5G/6G Wi-Fi/Ethernet Router Mode - IPv4 - IPv6 - NAT - WAN DHCP client - LAN DHCP server - DNS server 5 Notice: Actiontec has the sole right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time, and to discontinue any product or service without notice. Actiontec has the final interpretation. - DHCP reservation - uPNP - Port forwarding - Backhaul with Ethernet IGMP Snooping Wi-Fi 2.4GHz bandwidth: 20/40MHz, 5/6GHz bandwidth: 20/40/80/160MHz 802.11 k/ v/ r Band steering Channel scan DFS SSID broadcast WPA/WPA2/WPA3 PSK security TR-069 Management Network topology display - Device connected - Client accessed - Channel - Backhaul type Network optimize WPA/WPA2/WPA3 PSK security Freeze client Device information - Status - Online time - IP address - MAC address - Firmware version - Channel Client information - Status - Online time - IP address - MAC address - Channel Network statistic chart - Bandwidth usage - RSSI - Channel congestion - Event 6 Notice: Actiontec has the sole right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time, and to discontinue any product or service without notice. Actiontec has the final interpretation. Utilities - Reboot device - Upgrade remotely - Speed Test ◼ Specification Item WF-815 Dimension (D x H) 202mm x 85mm x 235mm (High) Weight 390g Installation Desktop placement LEDs 4x Status LED (multi-color) Interface 1 x 10GbE WAN 1 x 10GbE WAN 3 x 2.5GbE LAN 1 x DC jack Input Voltage +15V/4A Power consumption < 50W Environmental Specification Temperature Operation: 0°C～+40°C Storage: -40°C～+85°C Operating Humidity 5%～95% (non-condensing) Elevations 86kPa～106kPa altitude Dustproof and Waterproof IP20 Compliance • IEC 62368-1:2014 (Second Edition)+A11: 2017 • UL 62368-1, 2nd Ed, 2014-12-01 (Audio/video, information and 7 Notice: Actiontec has the sole right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time, and to discontinue any product or service without notice. Actiontec has the final interpretation. Item WF-815 communication technology equipment Part 1: Safety requirements) • CAN/CSA C22.2 No. 62368-1-14, 2nd Ed (Audio/video, information and communication technology equipment Part 1: Safety requirements) • FCC • ETL • RoHS 2011/65/EU compliant (RoHS 10 compliant, no Pb) Reliability MTBF > 300,000 Hours Telcordia SR-332, Reliability Prediction Procedures for Electronic Equipment, Issue 3, Method 1, Case 3, GB/GC (Ground Benign, Controlled) environment, 25ºC ambient temperature. Steady state, not including software failure. AFR AFR (Annualized Failure Rate) < 1.5% (in continuous operation) Chipset Wi-Fi SoC Qualcomm Flash 4GB eMMC DDR 1GB DDR4 RAM Wi-Fi Interface Operating frequency 2.4G radio: 2.4000GHz~2.4835GHz 5G radio: 5.150~5.250,5.250~5.350,5.470~5.725, 5.725~5.850 GHz 6G radio: 5.925~7.125 GHz Data Rate 802.11b: 1, 2, 5.5, and 11Mbps 802.11g: 6, 9, 12, 18, 24, 36, 48, an…

Text truncated - open the document above for the full version.

Actiontec Electronics Inc 2445 Augustine Drive Suite 501, Santa Clara, California 95054, United States 012423-17 rev2 Certification Application Attestation Statements Date: June 30, 2023 American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 To Whom It May Concern: Statement for 47 CFR section 2.911(d)(5)(i) ____ Actiontec Electronics Inc _____ certifies that as of the date of the application the equipment for which authorization is sought is not “covered” equipment 1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not “covered” equipment. Additional Explanation: <N/A> Statement for 47 CFR section 2.911(d)(5)(ii) _____ Actiontec Electronics Inc _____ (“the applicant”) certifies that, as of the date of the filing of this application, the applicant ☐ - is / ☑ - is not identified on the Covered List as an entity producing “covered” equipment. Thank you, By: ______ Brian Henrichs ______ (Signature 2 ) (Print name) Title: President Company: __ Actiontec Electronics Inc _ Telephone: __ (408) 857-9658 ___ 1 - The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist . 2 - Letters should be placed on appropriate letterhead.

Actiontec Electronics Inc. 2445 Augustine Drive Suite 501, Santa Clara, California 95054, United States U.S. Agent Designation for Service of Process TO: American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 ATTENTION: FCC Certification – Section 2.911(d)(7) Information This letter is to confirm that the Applicant will also serve as the U.S. Agent for Service of Process as required by 47 CFR 2.911(d)(7). The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The Applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information changes. Applicant Company name: Actiontec Electronics, Inc. Grantee Code: LNQ Contact Name: Brian J Henrichs Street Address: 2445 Augustine Dr Suite 501 City/Province/Zip: Santa Clara, CA 95054 Telephone No: (408) 857-9658 Email: [email protected] FRN: 0005810783 Applicant Signature 1 : Date: 2023/06/01 Signed by (Printed Name/Title): Brian J Henrichs / President 1 - Letters should be placed on appropriate letterhead.

Attestation Letter Federal Communications Commission Authorization and Evaluation Division We Name: Actiontec Electronics Inc Address: 2445 Augustine Drive Suite 501, Santa Clara, California 95054, United States Declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non-US channels in all the operational mode(s) for the following product. Product: Tri-band Wi-Fi 6E Wireless AP FCC ID: LNQ-WF815 Model: GR6EXX0C, WF-815 Sincerely, _________________ Name: Brian Henrichs Position: President Date: 2023-06-14 DocuSign Envelope ID: EBFBDCA8-E061-4F76-BB2E-FD2C7FDDB972

Letter of Declaration on Indoor Access Point (6ID) Operation Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: LNQ-WF815 To Whom It May Concern We, Actiontec Electronics Inc (Address: 2445 Augustine Drive Suite 501, Santa Clara, California 95054, United States), attest that this Indoor Access Point device complies with the following requirements of Part 15E of the FCC’s rules for 6G bands: Protocol attestation statement: To Whom It May Concern: We, Actiontec Electronics Inc, attest that this low-power indoor access point complies with the following requirements of Part 15E of the FCC' rules for the 5.925~7.125 GHz band: 1. This device’s transmit power spectral density is in accordance with the rules for low power indoor access points. 2. Contention-based protocol, as demonstrated in the test report, is permanently embedded in the chip (QCN9024) and is not host-dependent. 3. An 11ax IEEE AP’s Transmit Power Envelope element has information fields for power limits for connecting client/subordinate devices. The TPE information is embedded in this device’s signals and used to tell the connecting clients/subordinate that the max TX powers it is allowed to transmit. There is a regulatory info field in this device’s beacon and probe response frames which details this device type when the client/subordinate associates to this device. Statement acknowledging device restrictions: 1. This device was supplied power from a wired connection, has an integrated antenna, is not battery-powered, and does not have a weatherized enclosure. 2. This device's operation will not be allowed on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet. 3. This device is prohibited for control of or communications with unmanned aircraft systems, including drones. Sincerely, _________________ DocuSign Envelope ID: D1F30D00-9C3D-406C-8068-A74F0766E0C8 Name: Brian Henrichs Position: President Date: 2023-06-14 DocuSign Envelope ID: D1F30D00-9C3D-406C-8068-A74F0766E0C8

UN6GHZ PRE-APPROVAL GUIDANCE CHECKLIST 1. Antennas 1.1 Information for all the antennas, i.e., type, gain and relative positions within host, must be included in the filing. Please refer to page 10 of “2302RSU023-U6-FCC 6ID Test Report_Part1” for antenna information. Please refer to document “EUT Internal Photo” for the antenna positions. 1.2 Show how the (aggregate, if applicable) antenna gain was computed/measured (as in TCB Workshop Presentation Aggregate Antenna Gain Review, April 2021). Provide equation(s) used to calculate Directional Gain and provide example calculation showing how the DG was calculated with the antenna gain of individual antennas. Provide details (references or attached documents) on how the individual antenna gains were derived, i.e., declared by the host manufacturer, based on data sheet, or measured. Since the CBP needs to detect a small signal, the worst case scenario to consider is when the receiver has the lowest antenna gain. Please refer to page 10 of “2302RSU023-U6-FCC 6ID Test Report_Part1” for antenna information. According to FCC KDB 662911 D01v02r01: CDD Mode For power measurements: Array Gain = 0 dB for N ANT ≤ 4, the directional gain = max antenna gain + array gain For power spectral density (PSD) measurements: the max directional gain (each angle) = 10 log[(10 G1 /20 + 10 G2 /20 + ... + 10 GN /20 ) 2 /N ANT ] STBC Mode the max directional gain (each angle) = 10 log[(10 G1 /10 + 10 G2 /10 + ... + 10 GN /10 )/N ANT ]. The CBP was performed by conducted test. The uncorrelated has a minimum antenna gain of 5.35dBi, and the Ant 0 RF port was selected to perform CBP test. Please refer to page 88 of “2302RSU023-U6-FCC 6ID Test Report_Part4” for CBP test result. 1.3 For conducted test in MIMO cases, show that the testing was done for that path that has the lowest antenna gain. The EUT supports MIMO mode (CDD and STBC mode, see the follow picture)，and the CBP was performed by conducted test. The uncorrelated has a minimum antenna gain of 5.35dBi, and the Ant 0 RF port was selected to perform CBP test. Please refer to page 88 of “2302RSU023-U6-FCC 6ID Test Report_Part4” for CBP test result. 2. Contention Based Protocol (CBP) 2.1 CBP testing shall be performed on one channel in each sub-band of operation for both narrowest and widest bandwidths. Please refer to page 88 of “2302RSU023-U6-FCC 6ID Test Report_Part4” for the test channel and bandwidth information as follows. The narrowest and widest bandwidths were test for each UNII band. 2.2 Use three separate 10 MHz AWGN signals when testing a 160 MHz channel. The simulated incumbent signal must be a 10 MHz wide AWGN signal Please refer to page 88 of “2302RSU023-U6-FCC 6ID Test Report_Part4” for the test summary information. Please refer to page 92~95 of “2302RSU023-U6-FCC 6ID Test Report_Part4” for the AWGN signal plots. 2.3 Report lowest AWGN signal detectable by EUT Please refer to page 89~90 of “2302RSU023-U6-FCC 6ID Test Report_Part4” for lowest AWGN signal detectable by EUT. 2.4 Verify that the testing was performed with the AWGN signal set to lowest level (for example, - 100 dBm) and increased until the EUT detects and stops transmitting. The test was performed with a lowest AWGN signal level and increased until the EUT detects and stop transmission. Please refer to page 89~90 of “2302RSU023-U6-FCC 6ID Test Report_Part4” for the information. 2.5 If conducted measurements are used, the detection threshold needs to be corrected to refer to a 0 dBi gain antenna and include all the applicable losses (cables, etc.). For instance, the report should show (at least): Detection Level = Injected AWGN Power (dBm) – Antenna Gain (dBi) + Path Loss (dB) Conducted test is performed for this device. Please refer to page 28 of “2302RSU023-U6-FCC 6ID Test Report_Part1” for the test setup diagram as below. Please refer to page 88 of “2302RSU023-U6-FCC 6ID Test Report_Part4” for the test result summary. The uncorrelated has a minimum antenna gain of 5.35dBi, and the Ant 0 RF port was selected to perform CBP test Adjust Power (dBm) = AWGN Power (dBm) – Antenna Gain (dBi). Adjust Power (dBm) ≤ Detection Limit (-62dBm) All Detection Power in the report comply with the -62dBm threshold. 2.6 Include plots showing EUT has stopped transmitting after detection of AWGN signal. The plots of UNII-5/-6/-7/-8 On page 97~100 of “2302RSU023-U6-FCC 6ID Test Report_Part4” 2.7 Describe whether channel puncturing and/or bandwidth reduction mechanisms supported. The report needs to include a plot as an example for at least one of the AWGN signals used. Not Support. 2.8 If radiated testing is used, show that spot-checks were done to identify which side of the EUT has the lowest sensitivity to the incumbent signal detection, and that side was indeed chosen for the test. Conducted test is performed for this device. 3. Client Device Limitations This device is not a client device. 4. Emission Mask 4.1 Power spectral density suppression complies with 47 CFR § 15.407(b)(6). Please refer to Annex A - A.8 (Page 101 ~ 158) and Annex A - A.9 (Page 159 ~ 198) of “2302RSU023-U6-FCC 6ID Test Report_Part4” for the test result of power spectral density suppression. 4.2 If EUT supports OFDMA discuss testing of partial Resource Unit (RU) configurations. In any case the shape of the mask shall be based on full RU. This device supports one configuration only in 802.11ax full RU mode. Please refer to note 4 of Operation Description for this information (On Page 2) This information is also noted on page 11 (section 2.1 note 3) of “2302RSU023-U6-FCC 6ID Test Report_Part1” 4.3 OOBE limits only apply outside of the 5.925-7.125 GHz band. All in-band emissions need to meet the channel mask. In case a higher RBW for the in-Band Emissions Mask is used (i.e., a more conservative case) that should be noted. Please refer to Annex A - A.5 (Page 65 ~ 86) of “2302RSU023-U6-FCC 6ID Test Report_Part2 & Part2 & Part3 & Part4” for the test result of channel mask. 5. Filing 99% of…

Text truncated - open the document above for the full version.

Declaration of Conformity We Name: Actiontec Electronics Inc Address: 2445 Augustine Drive Suite 501, Santa Clara, California 95054, United States Declare that: Product: Tri-band Wi-Fi 6E Wireless AP FCC ID: LNQ-WF815 Model: GR6EXX0C, WF-815 Product which bears the above FCC ID is also compliant with the FCC requirements for sDOC. And the sDOC procedure shall be carried out prior to marketing the device in the US. Sincerely, _________________ Name: Brian Henrichs Position: President Date: 2023-06-14 DocuSign Envelope ID: CDD77A3C-B052-4968-B246-4F17994D9C1E

Declaration letter For our business issue and marketing requirement, we would like to list different model numbers as following: Model No.: Model Difference: there is not any hardware or software differences between , only for different brand name. _________________ Name: Brian Henrichs Position: President Date: 2023-06-14 DocuSign Envelope ID: A3083211-38B2-4D05-8E20-E012E42C58ED GR6EXX0C, WF-815 GR6EXX0C WF-815 and

Confidentiality Request Letter Federal Communications Commission Authorization and Evaluation Division FCC ID: LNQ-WF815 Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: 1. Block Diagram 2. Schematics 3. Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, _________________ Name: Brian Henrichs Position: President Date: 2023-06-14 DocuSign Envelope ID: 6BF07D54-F010-42AF-853B-B002D9BF8FCD

Declaration of Authorization We Name: Actiontec Electronics Inc Address: 2445 Augustine Drive Suite 501, Santa Clara, California 95054, United States Declare that: Name Representative of agent: Marlin Chen Agent Company name: MRT Technology (Suzhou) Co., Ltd Address: D8 Building, Youxin Industrial Park, No.2 Tian'edang Rd., Wuzhong Economic Development Zone City: Suzhou Country: China is authorized to apply for Certification of the following product(s): Product: Tri-band Wi-Fi 6E Wireless AP FCC ID: LNQ-WF815 Model: GR6EXX0C, WF-815 Sincerely, _________________ Name: Brian Henrichs Position: President Date: 2023-06-14 DocuSign Envelope ID: C8322D96-3C31-4287-A50E-5BC7BDB67334

Report No.: 2302RSU023-UE 1 of 4 External Photograph (1) EUT Photo (2) EUT Photo Report No.: 2302RSU023-UE 2 of 4 (3) EUT Photo (4) EUT Photo Report No.: 2302RSU023-UE 3 of 4 (5) EUT Photo (6) EUT Photo Report No.: 2302RSU023-UE 4 of 4 (7) EUT Photo (8) EUT Photo

Label Label Location Label Here

Report No.: 2302RSU023-UE 1 of 12 Internal Photograph (1) EUT Photo (2) EUT Photo Report No.: 2302RSU023-UE 2 of 12 (3) EUT Photo (4) EUT Photo Report No.: 2302RSU023-UE 3 of 12 (5) EUT Photo (6) EUT Photo Report No.: 2302RSU023-UE 4 of 12 (7) EUT Photo (8) EUT Photo Report No.: 2302RSU023-UE 5 of 12 (9) EUT Photo (10) EUT Photo Report No.: 2302RSU023-UE 6 of 12 (11) EUT Photo (12) EUT Photo Report No.: 2302RSU023-UE 7 of 12 (13) EUT Photo (14) EUT Photo Report No.: 2302RSU023-UE 8 of 12 (15) EUT Photo (16) EUT Photo Report No.: 2302RSU023-UE 9 of 12 (17) EUT Photo (18) EUT Photo Report No.: 2302RSU023-UE 10 of 12 (19) EUT Photo (20) EUT Photo Report No.: 2302RSU023-UE 11 of 12 (21) EUT Photo (22) EUT Photo Report No.: 2302RSU023-UE 12 of 12 (23) EUT Photo

MRT Technology (Suzhou) Co., Ltd Report No.: 2302RSU023-U7 Phone: +86-512-66308358 Report Version: V02 Web: www.mrt-cert.com Issue Date: 2023-06-21 Template Version:0.0 1 of 10 RF Exposure Evaluation Declaration FCC ID: LNQ-WF815 Applicant: Actiontec Electronics Inc. Product: Tri-band Wi-Fi 6E Wireless AP Model No.: GR6EXX0C, WF-815 Brand Name: Actiontec FCC Classification: Digital Transmission System (DTS) Unlicensed National Information Infrastructure (NII) 15E 6GHz Low Power Indoor Access Point (6ID) FCC Rule Part(s): FCC Part 2.1091 Received Date: 2023-02-08 Result: Complies Reviewed By: Kevin Guo Approved By: Robin Wu The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standards through the calibration of the equipment and evaluated measurement uncertainty herein. The test report shall not be reproduced except in full without the written approval of MRT Technology (Suzhou) Co., Ltd. Report No.: 2302RSU023-U7 2 of 10 Revision History Report No. Version Description Issue Date Note 2302RSU023-U7 V01 Initial Report 2023-05-20 Invalid 2302RSU023-U7 V02 Updated the product information 2023-06-21 Valid Report No.: 2302RSU023-U7 3 of 10 CONTENTS Description Page 1. General Information ................................................................................................................................ 4 1.1. Applicant ........................................................................................................................................ 4 1.2. Manufacturer ................................................................................................................................. 4 1.3. Testing Facility ............................................................................................................................... 4 1.4. Product Information ....................................................................................................................... 5 1.5. Antenna Details ............................................................................................................................. 5 1.6. Device Classification ..................................................................................................................... 6 1.7. Applied Standards ......................................................................................................................... 6 2. RF Exposure Evaluation ......................................................................................................................... 7 2.1. Test Limits ..................................................................................................................................... 7 2.2. MPE Exemptions ........................................................................................................................... 8 2.3. Calculated Result ......................................................................................................................... 11 Report No.: 2302RSU023-U7 4 of 10 1. General Information 1.1. Applicant Actiontec Electronics Inc. 3301 Olcott St. Santa Clara, CA 95054 1.2. Manufacturer Actiontec Electronics Inc. 3301 Olcott St. Santa Clara, CA 95054 1.3. Testing Facility Test Site – MRT Suzhou Laboratory Laboratory Location (Suzhou - Wuzhong) D8 Building, No.2 Tian’edang Rd., Wuzhong Economic Development Zone, Suzhou, China Laboratory Location (Suzhou - SIP) 4b Building, Liando U Valley, No.200 Xingpu Rd., Shengpu Town, Suzhou Industrial Park, China Laboratory Accreditations A2LA: 3628.01 CNAS: L10551 FCC: CN1166 ISED: CN0001 VCCI: R-20025 G-20034 C-20020 T-20020 R-20141 G-20134 C-20103 T-20104 Test Site – MRT Shenzhen Laboratory Laboratory Location (Shenzhen) 1G, Building A, Junxiangda Building, Zhongshanyuan Road West, Nanshan District, Shenzhen, China Laboratory Accreditations A2LA: 3628.02 CNAS: L10551 FCC: CN1284 ISED: CN0105 Test Site – MRT Taiwan Laboratory Laboratory Location (Taiwan) No. 38, Fuxing 2nd Rd., Guishan Dist., Taoyuan City 333, Taiwan (R.O.C.) Laboratory Accreditations TAF: L3261-190725 FCC: 291082, TW3261 ISED: TW3261 Report No.: 2302RSU023-U7 5 of 10 1.4. Product Information Product Name Tri-band Wi-Fi 6E Wireless AP Model No. GR6EXX0C, WF-815 Wi-Fi Specification 802.11a/b/g/n/ac/ax Bluetooth Specification V5.0 (Single mode, LE only) Antenna Information Refer to Section 1.5 Accessories Adapter #1 Model No.: ADT-38FKJ-PCU00F Input: 100-240V, 50/60Hz, Max. 1.0A Output: 5.0V⎓3.0A or 12.0V⎓3.0A Adapter #2 Model No.: ADS036G-W 120300 Input: 100-240V, 50/60Hz, Max. 1.0A Output: 5.0V⎓3.0A, 9.0V⎓3.0A, 12.0V⎓3.0A Note: 1. there is not any hardware or software differences between GE6EXX0C and WF-815, only for different brand. 2. The information of EUT was provided by the manufacturer, and the accuracy of the information shall be the responsibility of the manufacturer. 1.5. Antenna Details Antenna Type Frequency (MHz) TX Path Antenna Gain (dBi) Directional Gain (dBi) Ant 0 Ant 1 Ant 2 Ant 3 Correlated Uncorrelated Wi-Fi Antenna PIFA 2412 ~ 2462 4 4.68 4.75 4.39 4.38 8.34 2.36 5180 ~ 5320 4 5.75 5.34 5.65 5.41 7.56 1.71 5500 ~ 5720 4 5.15 5.05 5.72 5.09 7.88 2.23 5745 ~ 5825 4 5.42 5.34 5.28 5.13 7.88 2.17 5925 ~ 7125 4 5.35 5.42 5.75 5.67 9.17 3.21 Bluetooth Antenna PIFA 2402 ~ 2480 1 4.99 -- -- Remark: 1. The antenna gain and directional gain refer to manufacturer’s antenna specification. 2. The device supports CDD Mode and STBC mode, details refer to the table as below. 3. CDD signals are correlated, the directional gain as follows, For power measurements: Array Gain = 0 dB for N ANT ≤ 4, the directional gain = max antenna gain + array gain For power spectral density (PSD) measurements: the max directional gain (each angle) = 10 log[(10 G1 Report No.: 2302RSU023-U7 6 of 10 /20 + 10 G2 /20 + ... + 10 GN /20 ) 2 /N ANT ] 4. STBC signals are uncorrelated, the directional gain as follows, the max direction…

Text truncated - open the document above for the full version.

Customer:剑桥 Designer: SW Date: 2023/05/05 WF-815 OUTLINE 1. Benchmark 2. S-Parameters(VSWR&isolation) 3. AntennaEfficiency&PeakGain 4. Radiationpatterns 5. Summary JingHong3DChamberStructure •EMT-24SeriesSystemComponents • Chambers • EMTQuestSoftware • Posit ionin g Systems • ChamberRoomSize:L*W*H=5*5*5M VSWRwereperformedusinga keysight S-parameter NetworkAnalyzer. E5071C Highperformance PC TheMostAppropriateAntennaForYourDesign! ShanghaiJingHongCommunicationTechnology co.,LtdMeasurementReport0512-36877197 CMW500 ActiveMeasurement Activeswitch E5071C PassiveMeasurement Test Environment and Equipments TheMostAppropriateAntennaForYourDesign! ShanghaiJingHongCommunicationTechnology co.,LtdMeasurementReport0512-36877197 Test Method Test Condition Test Engineer Test Environment(°C/%) Test Dste RadiatedLean.ni20-24/45-6004.24.2023 Band(MHz)Test Frequency(MHz) 2400-25002400/2450/2500 5150-58505150/5500/5850 5925-71255925/6500/7125 TestingLocation GaltronicsShanghai,EMTesting TheMostAppropriateAntennaForYourDesign! ShanghaiJingHongCommunicationTechnology co.,LtdMeasurementReport0512-36877197 Test Infornation InstrumentManufacturerModel NO.Asset NoCali.IntervalCali.Due Date ENA Network Analyzer KeysightE5071BHLW-SC-191 Year2023/7/28 RF Switch BoxEMTNANANANA EMT Chamber EMTEMT-24HLW-SC-211 Year2023/9/10 Horn AntennaEMT0.8-6GHzNA1Year2023/9/10 TheMostAppropriateAntennaForYourDesign! ShanghaiJingHongCommunicationTechnology co.,LtdMeasurementReport0512-36877197 Correlated Gain&UncorrelatedGain 1. Benchmark(Blueooth) Z Y X BT TheMostAppropriateAntennaForYourDesign! ShanghaiJingHongCommunicationTechnology co.,LtdMeasurementReport0512-36877197 AntennaFrequency(MHz) BTantenna：2G 1. Benchmark TheMostAppropriateAntennaForYourDesign! ShanghaiJingHongCommunicationTechnology co.,LtdMeasurementReport0512-36877197 Z Y X AntennaFrequency(MHz) Ant1-4：2/5G Ant5-8：6G FR4 Metal 1. Benchmark AntennaFrequency(MHz) Ant1-4：2/ 5G Ant5-8：6G FR4 Metal Ant6 Ant5 Ant7 Ant8 Ant1 Ant2 Ant3 X TheMostAppropriateAntennaForYourDesign! ShanghaiJingHongCommunicationTechnology co.,LtdMeasurementReport0512-36877197 Ant4 y 2. S-Parameters(VSWR&isolation) BT TheMostAppropriateAntennaForYourDesign! ShanghaiJingHongCommunicationTechnology co.,LtdMeasurementReport0512-36877197 2. S-Parameters(VSWR&isolation) TheMostAppropriateAntennaForYourDesign! ShanghaiJingHongCommunicationTechnology co.,LtdMeasurementReport0512-36877197 21 2. S-Parameters(VSWR&isolation) TheMostAppropriateAntennaForYourDesign! ShanghaiJingHongCommunicationTechnology co.,LtdMeasurementReport0512-36877197 3 1 2. S-Parameters(VSWR&isolation) TheMostAppropriateAntennaForYourDesign! ShanghaiJingHo…

Text truncated - open the document above for the full version.