LNQC802URGMegaBoost 54 Mbps Wireless USB Adapter

MegaBoost 54Mbps Wireless USB Adapter Model Name: C802URG User’s Guide i TABLE OF CONTENT Introduction ................................................................................................................................... 1 Overview of this User’s Guide ................................................................................................... 1 Unpacking and Setup..................................................................................................................... 2 Unpacking ................................................................................................................................... 2 Setup ........................................................................................................................................... 2 Hardware Installation .................................................................................................................... 3 LED Indicator ............................................................................................................................. 3 Check the installation ................................................................................................................. 3 Software Installation...................................................................................................................... 4 Utility and Driver Installation..................................................................................................... 4 Wireless utility setting ................................................................................................................... 7 Link Info ..................................................................................................................................... 7 Configuration .............................................................................................................................. 8 Advanced .................................................................................................................................... 9 Site Survey................................................................................................................................ 12 Technical Specifications.............................................................................................................. 15 1 INTRODUCTION Congratulations on your purchase of this MegaBoost 54Mbps Wireless USB Adapter. This manual helps to get familiar with the MegaBoost 54Mbps Wireless USB Adapter. This manual contains detailed instructions in operation of this product. Please keep this manual for future reference. With a Wireless LAN (IEEE 802.11g) USB 2.0 Adapter, a desktop or laptop computer can communicate with another computer in a wireless way. Easy-to-use utilities are bundled with Wireless USB Adapter for configuration, monitoring, and diagnosis purposes. The MegaBoost 54Mbps Wireless USB Adapter can wirelessly transmit and receive data, minimizing the need for wired connections, at a speed of up to fifty-four megabit per second. The MegaBoost 54Mbps Wireless USB Adapter provides users with an access to real-time information anywhere in their organization. The mobility provides productivity and service, which are not available under wired networks. The MegaBoost 54Mbps Wireless USB Adapter configuration is easy to change from peer-to-peer networks, suitable for a small number of users, to full infrastructure networks of thousands of users that allow roaming around a broad area. Overview of this User’s Guide Introduction. Describes the MegaBoost 54Mbps Wireless USB Adapter and its features. Unpacking and Setup. Helps you get started with the basic installation of the MegaBoost 54Mbps Wireless USB Adapter. Hardware Installation. Describes the LED indicators of the Adapter. Software Installation. Tells how to setup the driver and the utility setting. Technical Specifications. Lists the technical specifications of the MegaBoost 54Mbps Wireless USB Adapter. 2 UNPACKING AND SETUP This chapter provides unpacking and setup information for the MegaBoost 54Mbps Wireless USB Adapter. Unpacking Open the box of the MegaBoost 54Mbps Wireless USB Adapter and carefully unpack it. The box should contain the following items:
One MegaBoost 54Mbps Wireless USB Adapter
One Driver & Utility CD-ROM If any item is found missing or damaged, please contact your local reseller for replacement. Setup The setup of the MegaBoost 54Mbps Wireless USB Adapter can be performed using the following steps:
Visually inspect the USB connector and make sure that it is fully plugged in to the system’s USB port.
Make sure that there is a well environment that there is no much intrusion to have a better connection. 3 HARDWARE INSTALLATION LED Indicator LINK The LINK LED lights green when the MegaBoost 54Mbps Wireless USB Adapter is connected to a network successfully. Otherwise the LINK indicator blinks green while the MegaBoost 54Mbps Wireless USB Adapter is access the wireless network. Check the installation The LED of the MegaBoost 54Mbps Wireless USB Adapter is clearly visible and the status of the network link can be seen instantly: 1. When connected to the USB port and the driver were installed, the LNK LED will start blinking, and it means that the device is starting to scan an 802.11g wireless device near the MegaBoost 54Mbps Wireless USB Adapter. 2. While the MegaBoost 54Mbps Wireless USB Adapter linked up to the Access Point or to other Wireless LAN station, the LINK LED will always light up. 4 SOFTWARE INSTALLATION This section will lead you to install the driver and utility of the MegaBoost 54Mbps Wireless USB Adapter. Before insert the USB Dongle into USB port of your computer, please install the Utility Program first. Make sure that the MegaBoost 54Mbps Wireless USB Adapter is NOT inserted into the USB slot. Utility and Driver Installation Insert the 802.11g Wireless LAN USB 2.0 Adapter Driver & Utility CD-ROM …

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2

FCC ID .: LNQC802URG Label Location

Approver DATE Model IDCAMEO PN# Applicant C802URG George C. Angela C. ActionTec MODEL : Q'TY: S/N: 40 PCS FROM (Serial No) TO MADE IN CHINA 1 5 2 . 0 0 m m 101.00 mm ( Part Number ) (Serial No) Nov.15,06' 0560 AV : Version X : Channel S/N: C802URG Rev.AV (Serial No.) FCC ID: LNQC802URG 2 5 . 0 0 m m 51.00 mm 0560 "See Caution in Manual" White Box MegaBoost 54 Mbps Wireless USB Adapter Made In China Customer Desinger Remark C802URG Rev.A1 MegaBoost 54 Mbps Wireless USB Adapter 1 8 . 7 0 m m Bottom Label 0560 FCC ID: LNQC802URG "See Caution in Manual" MADE IN CHINA 39.70 mm MACXXXXXXXXXXXX S/N: 0647A1000006 C802URG MegaBoost 54 Mbps Wireless USB Adapter

Page 3 Page 4 Page 5

FCC ID: LNQC802URG Report No.: RF951219L18 Operational Description This device is a MegaBoost 54 Mbps Wireless USB Adapter in the 2.4GHz frequency spectrum with throughput of up to 54Mbps which OFDM technique will be applied. If the signal to noise radio is too poor which could not support 54Mbps, the 11Mbps data rate with DSSS technique will be applied. The transmitter of the EUT is powered by host equipment. The antenna is Printed antenna without connector. The other instruction, please have a look at the users manual.

A - 1 APPENDIX A: TEST DATA Liquid Level Photo MSL 2450MHz D=150mm A - 2 Date/Time: 2006/12/27 11:28:24 Test Laboratory: Advance Data Technology N800C-11b-Ch1-Mode 1 DUT: MegaBoost 54Mbps Wireless USB Adapter ; Type: C802URG ; Test Frequency: 2412 MHz Communication System: 802.11b ; Frequency: 2412 MHz ; Duty Cycle: 1:1 ; Modulation type: DBPSK Medium: MSL2450 Medium parameters used: f = 2412 MHz; σ = 1.96 mho/m; ε r = 51.8; ρ = 1000 kg/m 3 ; Liquid level : 150 mm Phantom section: Flat Section ; Separation distance : 8 mm (The bottom side of the EUT to the Phantom) Antenna type : Printed Antenna ; Air temp. : 22.6 degrees ; Liquid temp. : 21.4 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2006/11/23 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2006/3/15 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.7 Build 44 ; Postprocessing SW: SEMCAD, V1.8 Build 171 Low Channel 1/Area Scan (5x8x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.708 mW/g Low Channel 1/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 20.5 V/m Peak SAR (extrapolated) = 1.34 W/kg SAR(1 g) = 0.589 mW/g; SAR(10 g) = 0.293 mW/g Maximum value of SAR (measured) = 0.622 mW/g A - 3 Date/Time: 2006/12/27 11:45:13 Test Laboratory: Advance Data Technology N800C-11b-Ch6-Mode 1 DUT: MegaBoost 54Mbps Wireless USB Adapter ; Type: C802URG ; Test Frequency: 2437 MHz Communication System: 802.11b ; Frequency: 2437 MHz ; Duty Cycle: 1:1 ; Modulation type: DBPSK Medium: MSL2450 Medium parameters used: f = 2437 MHz; σ = 1.99 mho/m; ε r = 51.7; ρ = 1000 kg/m 3 ; Liquid level : 150 mm Phantom section: Flat Section ; Separation distance : 8 mm (The bottom side of the EUT to the Phantom) Antenna type : Printed Antenna ; Air temp. : 22.6 degrees ; Liquid temp. : 21.4 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2006/11/23 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2006/3/15 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.7 Build 44 ; Postprocessing SW: SEMCAD, V1.8 Build 171 Mid Channel 6/Area Scan (5x8x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.764 mW/g Mid Channel 6/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 20.2 V/m Peak SAR (extrapolated) = 1.62 W/kg SAR(1 g) = 0.710 mW/g; SAR(10 g) = 0.349 mW/g Maximum value of SAR (measured) = 0.761 mW/g A - 4 Date/Time: 2006/12/27 12:00:54 Test Laboratory: Advance Data Technology N800C-11b-Ch11-Mode 1 DUT: MegaBoost 54Mbps Wireless USB Adapter ; Type: C802URG ; Test Frequency: 2462 MHz Communication System: 802.11b ; Frequency: 2462 MHz ; Duty Cycle: 1:1 ; Modulation type: DBPSK Medium: MSL2450 Medium parameters used: f = 2462 MHz; σ = 2.03 mho/m; ε r = 51.6; ρ = 1000 kg/m 3 ; Liquid level : 150 mm Phantom section: Flat Section ; Separation distance : 8 mm (The bottom side of the EUT to the Phantom) Antenna type : Printed Antenna ; Air temp. : 22.6 degrees ; Liquid temp. : 21.4 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2006/11/23 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2006/3/15 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.7 Build 44 ; Postprocessing SW: SEMCAD, V1.8 Build 171 High Channel 11/Area Scan (5x8x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.03 mW/g High Channel 11/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 23.0 V/m Peak SAR (extrapolated) = 2.18 W/kg SAR(1 g) = 0.947 mW/g; SAR(10 g) = 0.463 mW/g Maximum value of SAR (measured) = 1.02 mW/g A - 5 A - 6 Date/Time: 2006/12/27 13:12:49 Test Laboratory: Advance Data Technology N800C-11g-Ch1-Mode 2 DUT: MegaBoost 54Mbps Wireless USB Adapter ; Type: C802URG ; Test Frequency: 2412 MHz Communication System: 802.11g ; Frequency: 2412 MHz ; Duty Cycle: 1:1 ; Modulation type: BPSK Medium: MSL2450 Medium parameters used: f = 2412 MHz; σ = 1.96 mho/m; ε r = 51.8; ρ = 1000 kg/m 3 ; Liquid level : 150 mm Phantom section: Flat Section ; Separation distance : 8 mm (The bottom side of the EUT to the Phantom) Antenna type : Printed Antenna ; Air temp. : 22.6 degrees ; Liquid temp. : 21.4 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2006/11/23 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2006/3/15 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.7 Build 44 ; Postprocessing SW: SEMCAD, V1.8 Build 171 Low Channel 1/Area Scan (5x8x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.309 mW/g Low Channel 1/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 13.0 V/m Peak SAR (extrapolated) = 0.667 W/kg SAR(1 g) = 0.293 mW/g; SAR(10 g) = 0.144 mW/g Maximum value of SAR (measured) = 0.311 mW/g A - 7 Date/Time: 2006/12/27 13:28:46 Test Laboratory: Advance Data Technology N800C-11g-Ch6-Mode 2 DUT: MegaBoost 54Mbps Wireless USB Adapter ; Type: C802URG ; Test Frequency: 2437 MHz Communication System: 802.11g ; Frequency: 2437 MHz ; Duty Cycle: 1:1 ; Modulation type: BPSK Medium: MSL2450 Medium parameters used: f = 2437 MHz; σ = 1.99 mho/m; ε r = 51.7; ρ = 1000 kg/m 3 ; Liquid level : 150 mm Phantom section: Flat Section ; Separation distance : 8 mm (The bottom side of the EUT to the Phantom) Antenna type : Printed Antenna ; Air temp. : 22.6 degrees ; Liquid temp. : 21.4 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2006/11/23 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 20…

Text truncated - open the document above for the full version.

B - 1 APPENDIX B: ADT SAR MEASUREMENT SYSTEM C - 1 APPENDIX C: PHOTOGRAPHS OF SYSTEM VALIDATION APPENDIX D: SYSTEM CERTIFICATE & CALIBRATION D1: SAM PHANTOM D2: DOSIMETRIC E-FIELD PROBE D3: DAE D4: SYSTEM VALIDATION DIPOLE

Report no.: SA951219L18 1 Report Format Version 2.0.5 SAR TEST REPORT REPORT NO.: SA951219L18 MODEL NO.: C802URG RECEIVED: Dec. 19, 2006 TESTED: Dec. 27, 2006 ~ Jan. 23, 2007 ISSUED: Jan. 24, 2007 APPLICANT: Actiontec Electronics, Inc. ADDRESS: 760 North Mary Ave, Sunnyvale, CA 94085 ISSUED BY: Advance Data Technology Corporation LAB ADDRESS: No. 47, 14 th Ling, Chia Pau Tsuen, Lin Kou Hsiang 244, Taipei Hsien, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2 nd Rd., Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 39 pages in total except Appendix. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by CNLA, A2LA or any government agencies. The test results in the report only apply to the tested sample. Report no.: SA951219L18 2 Report Format Version 2.0.5 TABLE OF CONTENTS 1. CERTIFICATION.......................................................................................................3 2. GENERAL INFORMATION........................................................................................4 2.1 GENERAL DESCRIPTION OF EUT........................................................................4 2.2 GENERAL DESCRIPTION OF APPLIED STANDARDS.........................................5 2.3 GENERAL INOFRMATION OF THE SAR SYSTEM................................................5 2.4 GENERAL DESCRIPTION OF THE SPATIAL PEAK SAR EVALUATION...............8 3. DESCRIPTION OF SUPPORT UNITS.....................................................................12 4. DESCRIPTION OF TEST MODES AND CONFIGURATIONS.................................13 4.1. DESCRIPTION OF ANTENNA LOCATION...........................................................13 4.2. DESCRIPTION OF ASSESSMENT POSITION.....................................................14 4.3. DESCRIPTION OF TEST MODE..........................................................................15 4.4. SUMMARY OF TEST RESULTS...........................................................................15 5. TEST RESULTS......................................................................................................16 5.1 TEST PROCEDURES..........................................................................................16 5.2 MEASURED SAR RESULTS................................................................................18 5.3 SAR LIMITS..........................................................................................................22 5.4 RECIPES FOR TISSUE SIMULATING LIQUIDS..................................................23 5.5 TEST EQUIPMENT FOR TISSUE PROPERTY....................................................26 6. SYSTEM VALIDATION............................................................................................27 6.1 TEST EQUIPMENT..............................................................................................27 6.2 TEST PROCEDURE.............................................................................................28 6.3 VALIDATION RESULTS........................................................................................30 6.4 SYSTEM VALIDATION UNCERTAINTIES............................................................31 7. MEASUREMENT SAR PROCEDURE UNCERTAINTIES........................................31 7.1. PROBE CALIBRATION UNCERTAINTY...............................................................32 7.2. ISOTROPY UNCERTAINTY.................................................................................33 7.3. BOUNDARY EFFECT UNCERTAINTY.................................................................33 7.4. PROBE LINEARITY UNCERTAINTY....................................................................34 7.5. READOUT ELECTRONICS UNCERTAINTY........................................................34 7.6. RESPONSE TIME UNCERTAINTY......................................................................34 7.7. INTEGRATION TIME UNCERTAINTY..................................................................35 7.8. PROBE POSITIONER MECHANICAL TOLERANCE............................................36 7.9. PROBE POSITIONING.........................................................................................36 7.10. PHANTOM UNCERTAINTY..................................................................................37 7.11. DASY4 UNCERTAINTY BUDGET........................................................................38 8. INFORMATION ON THE TESTING LABORATORIES.............................................39 APPENDIX A: TEST CONFIGURATIONS AND TEST DATA APPENDIX B: ADT SAR MEASUREMENT SYSTEM APPENDIX C: PHOTOGRAPHS OF SYSTEM VALIDATION APPENDIX D: SYSTEM CERTIFICATE & CALIBRATION Report no.: SA951219L18 3 Report Format Version 2.0.5 1. CERTIFICATION PRODUCT: MegaBoost 54 Mbps Wireless USB Adapter MODEL: C802URG BRAND: Actiontec APPLICANT: Actiontec Electronics, Inc. TESTED: Dec. 27, 2006 ~ Jan. 23, 2007 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1093) FCC OET Bulletin 65, Supplement C (01-01) RSS-102 IEEE 1528-2003 The above equipment has been tested by Advance Data Technology Corporation, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Jan. 24, 2007 Rennie Wang TECHNICAL ACCEPTANCE : , DATE: Jan. 24, 2007 Responsible for RF Stanely Hsu APPROVED BY : , DATE: Jan. 24, 2007 Gary Chang / Supervisor Report no.: SA951219L18 4 Report Format Version 2.0.5 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT PRODUCT MegaBoost 54 Mbps Wireless USB Adapter MODEL NO. C802URG FCC ID LNQC802URG POWER SUPPLY …

Text truncated - open the document above for the full version.

Report No.: RF951219L18 1 Report Format Version 2.0.5 FCC TEST REPORT REPORT NO.: RF951219L18 MODEL NO.: C802URG RECEIVED: Dec. 19, 2006 TESTED: Dec. 19 ~ 22, 2006 ISSUED: Dec. 27, 2006 APPLICANT: Actiontec Electronics, Inc. ADDRESS: 760 North Mary Ave, Sunnyvale, CA 94085 ISSUED BY: Advance Data Technology Corporation LAB ADDRESS: No. 47, 14 th Ling, Chia Pau Tsuen, Lin Kou Hsiang 244, Taipei Hsien, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2 nd Rd., Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 58 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by CNLA, A2LA or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF951219L18 2 Report Format Version 2.0.5 Table of Contents 1. CERTIFICATION........................................................................................................4 2. SUMMARY OF TEST RESULTS................................................................................5 2.1 MEASUREMENT UNCERTAINTY..............................................................................5 3. GENERAL INFORMATION.........................................................................................6 3.1 GENERAL DESCRIPTION OF EUT...........................................................................6 3.2 DESCRIPTION OF TEST MODES.............................................................................7 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST.........................................................7 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL:.............................8 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS.............................................9 3.4 DESCRIPTION OF SUPPORT UNITS......................................................................10 4. TEST TYPES AND RESULTS..................................................................................11 4.1 CONDUCTED EMISSION MEASUREMENT............................................................11 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT..........................................11 4.1.2 TEST INSTRUMENTS..............................................................................................11 4.1.3 TEST PROCEDURES..............................................................................................12 4.1.4 DEVIATION FROM TEST STANDARD.....................................................................12 4.1.5 TEST SETUP...........................................................................................................13 4.1.6 EUT OPERATING CONDITIONS.............................................................................13 4.1.7 TEST RESULTS.......................................................................................................14 4.2 RADIATED EMISSION MEASUREMENT.................................................................20 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT...............................................20 4.2.2 TEST INSTRUMENTS..............................................................................................21 4.2.3 TEST PROCEDURES..............................................................................................22 4.2.4 DEVIATION FROM TEST STANDARD.....................................................................22 4.2.5 TEST SETUP...........................................................................................................23 4.2.6 EUT OPERATING CONDITIONS.............................................................................23 4.2.7 TEST RESULTS.......................................................................................................24 4.3 6dB BANDWIDTH MEASUREMENT........................................................................32 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT......................................................32 4.3.2 TEST INSTRUMENTS..............................................................................................32 4.3.3 TEST PROCEDURE.................................................................................................33 4.3.4 DEVIATION FROM TEST STANDARD.....................................................................33 4.3.5 TEST SETUP...........................................................................................................33 4.3.6 EUT OPERATING CONDITIONS.............................................................................33 4.3.7 TEST RESULTS.......................................................................................................34 4.4 MAXIMUM PEAK OUTPUT POWER........................................................................38 4.4.1 LIMITS OF MAXIMUM PEAK OUTPUT POWER MEASUREMENT.........................38 4.4.2 INSTRUMENTS........................................................................................................38 4.4.1 TEST PROCEDURES..............................................................................................39 4.4.2 DEVIATION FROM TEST STANDARD.....................................................................39 4.4.3 TEST SETUP...........................................................................................................39 Report No.: RF951219L18 3 Report Format Version 2.0.5 4.4.4 EUT OPERATING CONDITIONS.............................................................................39 4.4.3 TEST RESULTS.......................................................................................................40 4.5 POWER SPECTRAL DENSITY MEASUREMENT....................................................41 4.5.1 LIMITS OF POWER SPECTRAL DENSITY MEASUREMENT.................................41 4.5.2 TEST INSTRUMENTS..............…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 RADIATED EMISSION TEST