M7N-BW8030USZwave Thermostat

1 ZTS-100 / ZTS-110 (Z-Thermostat) 2 Table of Contents Introduction .................................................................... 3 Features List .............................................................. 4 Glossary .......................................................................... 5 Physical Installation and Wiring .................................... 6 Installation Location .................................................... 6 Wiring ....................................................................... 6 Jumper Settings for ELECTH-HPUMP and HE-HG .............. 8 Mounting ................................................................... 9 ZTS-100 Z-Thermostat Operations ................................. 10 Product Overview ...................................................... 10 Description of Function Keys ......................................... 10 Normal Operation Mode ................................................. 11 Change Operation Mode ............................................... 11 Select Fan Mode ......................................................... 12 Select Program Mode ................................................... 12 Override/Permanent Override ....................................... 13 Setting Mode ................................................................... 14 Temperature Scale selection (for SIMPLE mode) .............. 18 Setting Schedule ............................................................ 18 Z-Wave Add (Inclusion) / Delete (Exclusion) Mode ....... 21 Add ZTS-100 to Gateway / Controller Z-Wave network ..... 22 Delete ZTS-100 from Gateway / Controller Z-Wave network 23 Support Association Command Class .............................. 24 Z-Wave Configuration Command ..................................... 25 Filter Counter ................................................................. 26 Reset ZTS-100 to Factory Default Settings ..................... 27 Battery Low Indication ................................................... 28 Defrost Indication .......................................................... 28 Out of Temperature Range Indication ............................ 28 Advanced Recovery Indication ....................................... 29 Energy Saving Mode ....................................................... 30 Short Cycle Start Up Protection ...................................... 31 Frequently Asked Questions ........................................... 31 Technical Specifications ................................................. 33 Checking Accessories .................................................... 34 FCC Notice ...................................................................... 34 Warnings ........................................................................ 34 Caution .......................................................................... 34 3 ZTS-100 / ZTS-110 Z-Thermostat Introduction Welcome to the Z-Wave world of home automation, your ZTS-100 Z-Thermostat (Figure 1) is a comfort control master that allows to control your room temperature with programmable time schedule WAKE, AWAY, HOME and SLEEP event which can maximize energy conservation and comfort while minimizing the effort required to maintain the appropriate temperature in your home whether you are at home or away. Also, it can be utilized to control / check your room temperature by the smart phone or PC while you are at office, home anywhere or around the world which can go through the Z-Wave gateway control. ZTS-100 can be configured as either “Frequently Listening Routing Slaves” (FLiRS) or “Always Listening” node and it will distinguish the power source (batteries or 24Vac) automatically and switch to appropriate mode during inclusion stage. FLiRS node type is targeted for battery operated applications and will enter sleep mode frequently in order to conserve battery consumption that can provide flexibility if there is out of 24Vac power line. Always Listening node type is targeted for AC power operated applications and it can act as a repeater, which will re-transmit the RF signal to ensure that the signal is received by its intended destination by routing the signal around obstacle and radio dead spots. Figure 1. ZTS-100 / ZTS-110 4 Features List HVAC System Type Compatible: z Standard (gas/electric) or Heat Pump Multistage System Compatible: z Standard HVAC Systems: 2 stage heating, 1 stage cooling z Heat Pump Systems: 2 stage heating, 1 stage cooling Heat Pump change over valve: z Selectable change over with cool or with heat Power: z Powered by alkaline batteries AA x 4pcs or 24Vac Program Style: z 2 program modes for scheduling (Mo-Fr, Sa-Su) z 4 Separate Time and Temperature Settings for each program z Heat and Cool set-points for each program z Temporary Program Override z Permanent Program Override z Built-in flash memory stores heat and cool program settings Temperature Display and Control: z Temperature display in °F or °C z Temperature Measurable Range: 32 – 99 °F / 0 – 40 °C z Temperature Setting Range: 41-99 °F / 5-37 °C z Adjustable Temperature Control Swing/Differential a) Swing: 1°F, 2°F, 3°F or 4°F ( 0.5°C, 1.0°C, 1.5°C or 2°C) b) Differential: 1°F, 2°F, 3°F or 4°F ( 0.5°C, 1.0°C, 1.5°C or 2°C) z Advanced Recovery Mode (ARM) z Defrost Function z Short cycle start up protection Clock: z Time display format: 12/24 hour clock selection with day displayed Filter Counter: z Filter change reminder displayed after 500 hours usage (500-4000hrs) Others: z Support Network Wide Inclusion (NWI) and Explore Frames z Support “Frequently Listening Routing Slaves” (FLiRS) or “Always Listening” z Support Simple mode z Battery Low Indicator z Built-in white LCD Backlight 5 Glossary Device or Node Devices and nodes are all terms to describe an individual Z-Wave device. These are all interchangeable when setting up your Z-Wave network. Inclusion Add a Z-Wave device to the network. Exclusion Delete a Z-Wave device from the n…

Text truncated - open the document above for the full version.

1 ZTS-100 / ZTS-110 (Z-Thermostat) 2 Table of Contents Introduction .................................................................... 3 Features List .............................................................. 4 Glossary .......................................................................... 5 Physical Installation and Wiring .................................... 6 Installation Location .................................................... 6 Wiring ....................................................................... 6 Jumper Settings for ELECTH-HPUMP and HE-HG .............. 8 Mounting ................................................................... 9 ZTS-100 Z-Thermostat Operations ................................. 10 Product Overview ...................................................... 10 Description of Function Keys ......................................... 10 Normal Operation Mode ................................................. 11 Change Operation Mode ............................................... 11 Select Fan Mode ......................................................... 12 Select Program Mode ................................................... 12 Override/Permanent Override ....................................... 13 Setting Mode ................................................................... 14 Temperature Scale selection (for SIMPLE mode) .............. 18 Setting Schedule ............................................................ 18 Z-Wave Add (Inclusion) / Delete (Exclusion) Mode ....... 21 Add ZTS-100 to Gateway / Controller Z-Wave network ..... 22 Delete ZTS-100 from Gateway / Controller Z-Wave network 23 Support Association Command Class .............................. 24 Z-Wave Configuration Command ..................................... 25 Filter Counter ................................................................. 26 Reset ZTS-100 to Factory Default Settings ..................... 27 Battery Low Indication ................................................... 28 Defrost Indication .......................................................... 28 Out of Temperature Range Indication ............................ 28 Advanced Recovery Indication ....................................... 29 Energy Saving Mode ....................................................... 30 Short Cycle Start Up Protection ...................................... 31 Frequently Asked Questions ........................................... 31 Technical Specifications ................................................. 33 Checking Accessories .................................................... 34 FCC Notice ...................................................................... 34 Warnings ........................................................................ 34 Caution .......................................................................... 34 3 ZTS-100 / ZTS-110 Z-Thermostat Introduction Welcome to the Z-Wave world of home automation, your ZTS-100 Z-Thermostat (Figure 1) is a comfort control master that allows to control your room temperature with programmable time schedule WAKE, AWAY, HOME and SLEEP event which can maximize energy conservation and comfort while minimizing the effort required to maintain the appropriate temperature in your home whether you are at home or away. Also, it can be utilized to control / check your room temperature by the smart phone or PC while you are at office, home anywhere or around the world which can go through the Z-Wave gateway control. ZTS-100 can be configured as either “Frequently Listening Routing Slaves” (FLiRS) or “Always Listening” node and it will distinguish the power source (batteries or 24Vac) automatically and switch to appropriate mode during inclusion stage. FLiRS node type is targeted for battery operated applications and will enter sleep mode frequently in order to conserve battery consumption that can provide flexibility if there is out of 24Vac power line. Always Listening node type is targeted for AC power operated applications and it can act as a repeater, which will re-transmit the RF signal to ensure that the signal is received by its intended destination by routing the signal around obstacle and radio dead spots. Figure 1. ZTS-100 / ZTS-110 4 Features List HVAC System Type Compatible: z Standard (gas/electric) or Heat Pump Multistage System Compatible: z Standard HVAC Systems: 2 stage heating, 1 stage cooling z Heat Pump Systems: 2 stage heating, 1 stage cooling Heat Pump change over valve: z Selectable change over with cool or with heat Power: z Powered by alkaline batteries AA x 4pcs or 24Vac Program Style: z 2 program modes for scheduling (Mo-Fr, Sa-Su) z 4 Separate Time and Temperature Settings for each program z Heat and Cool set-points for each program z Temporary Program Override z Permanent Program Override z Built-in flash memory stores heat and cool program settings Temperature Display and Control: z Temperature display in °F or °C z Temperature Measurable Range: 32 – 99 °F / 0 – 40 °C z Temperature Setting Range: 41-99 °F / 5-37 °C z Adjustable Temperature Control Swing/Differential a) Swing: 1°F, 2°F, 3°F or 4°F ( 0.5°C, 1.0°C, 1.5°C or 2°C) b) Differential: 1°F, 2°F, 3°F or 4°F ( 0.5°C, 1.0°C, 1.5°C or 2°C) z Advanced Recovery Mode (ARM) z Defrost Function z Short cycle start up protection Clock: z Time display format: 12/24 hour clock selection with day displayed Filter Counter: z Filter change reminder displayed after 500 hours usage (500-4000hrs) Others: z Support Network Wide Inclusion (NWI) and Explore Frames z Support “Frequently Listening Routing Slaves” (FLiRS) or “Always Listening” z Support Simple mode z Battery Low Indicator z Built-in white LCD Backlight 5 Glossary Device or Node Devices and nodes are all terms to describe an individual Z-Wave device. These are all interchangeable when setting up your Z-Wave network. Inclusion Add a Z-Wave device to the network. Exclusion Delete a Z-Wave device from the n…

Text truncated - open the document above for the full version.

www.tuv.com Appendix 3 Prüfbericht - Nr.: Test Report No.: 14029350 001 Seite 1 von 3 Page 1 of 3 External View External View www.tuv.com Appendix 3 Prüfbericht - Nr.: Test Report No.: 14029350 001 Seite 2 von 3 Page 2 of 3 External View External View www.tuv.com Appendix 3 Prüfbericht - Nr.: Test Report No.: 14029350 001 Seite 3 von 3 Page 3 of 3 External View

www.tuv.com Appendix 3 Prüfbericht - Nr.: Test Report No.: 14029350 001 Seite 1 von 3 Page 1 of 3 External View External View www.tuv.com Appendix 3 Prüfbericht - Nr.: Test Report No.: 14029350 001 Seite 2 von 3 Page 2 of 3 External View External View www.tuv.com Appendix 3 Prüfbericht - Nr.: Test Report No.: 14029350 001 Seite 3 von 3 Page 3 of 3 External View

www.tuv.com Appendix 5 Prüfbericht - Nr.: Test Report No.: 14029350 001 Seite 2 von 23 Page 2 of 23 FCC Label and location

www.tuv.com Appendix 5 Prüfbericht - Nr.: Test Report No.: 14029350 001 Seite 2 von 23 Page 2 of 23 FCC Label and location

www.tuv.com Appendix 5 Prüfbericht - Nr.: Test Report No.: 14029350 001 Seite 2 von 23 Page 2 of 23 FCC Label and location

www.tuv.com Appendix 4 Prüfbericht - Nr.: Test Report No.: 14029350 001 Seite 1 von 2 Page 1 of 2 Internal View Internal View www.tuv.com Appendix 4 Prüfbericht - Nr.: Test Report No.: 14029350 001 Seite 2 von 2 Page 2 of 2 Internal View Internal View

www.tuv.com Appendix 4 Prüfbericht - Nr.: Test Report No.: 14029350 001 Seite 1 von 2 Page 1 of 2 Internal View Internal View www.tuv.com Appendix 4 Prüfbericht - Nr.: Test Report No.: 14029350 001 Seite 2 von 2 Page 2 of 2 Internal View Internal View

www.tuv.com Appendix 4 Prüfbericht - Nr.: Test Report No.: 14029350 001 Seite 1 von 2 Page 1 of 2 Internal View Internal View www.tuv.com Appendix 4 Prüfbericht - Nr.: Test Report No.: 14029350 001 Seite 2 von 2 Page 2 of 2 Internal View Internal View

www.tuv.com Test Report No.: 14029350 001 Date: 05.06.2012 Page 2 of 14 Test Summary Conducted Emission Result: Pass 20dB bandwidth Result: Pass Radiated Emission of Carrier Frequency Result: Pass Spurious Radiated Emissions Result: Pass www.tuv.com Test Report No.: 14029350 001 Date: 05.06.2012 Page 3 of 14 Contents General Remarks ...................................................................................................4 List of Test and Measurement Instruments.........................................................5 General Product Information ................................................................................6 Product Function and Intended Use.............................................................................................6 Ratings and System Details...........................................................................................................6 Independent Operation Modes......................................................................................................7 Submitted Documents ...................................................................................................................7 Related Submittal(s) Grants ..........................................................................................................7 Test Set-up and Operation Mode..........................................................................8 Principle of Configuration Selection ............................................................................................8 Test Operation and Test Software ................................................................................................8 Special Accessories and Auxiliary Equipment ............................................................................8 Countermeasures to achieve EMC Compliance ..........................................................................8 Test Methodology ..................................................................................................9 Radiated Emission..........................................................................................................................9 Field Strength Calculation .............................................................................................................9 Test Results .........................................................................................................10 Conducted Emission Section 15.207 ......................................................................................10 20dB Bandwidth Section 15.215(c) .........................................................................................11 Radiated Emission of Carrier Frequency Section 15.249(a)..................................................12 Spurious Radiated Emissions Section 15.249(a, c, d, e) .......................................................13 Appendix 1: Test Results Appendix 2: Test Setup Appendix 3: EUT External Photo Appendix 4: EUT Internal Photo Appendix 5: Block Diagram, FCCID Label, Schematics and User manual. www.tuv.com Test Report No.: 14029350 001 Date: 05.06.2012 Page 4 of 14 General Remarks Nil. www.tuv.com Test Report No.: 14029350 001 Date: 05.06.2012 Page 5 of 14 List of Test and Measurement Instruments Hong Kong Productivity Council (Registration number: 90656) Equipment Manufacturer Type S/N Due Date Semi-anechoic Chamber Frankonia Nil Nil 25-May-13 Test Receiver R & S ESU40 100190 26-May-13 Bi-conical Antenna R & S HK116 100241 05-May-13 Log Periodic Antenna R & S HL223 841516/020 06-May-13 Coaxial cable 50ohm Rosenberger RTK081-05S- 05S-10m LA2-001-10M / 001 15-Nov-13 Microwave amplifer 0.5- 26.5GHz, 25dB gain HP 83017A 3950M00241 03-Oct-13 High Pass Filter (cutoff freq. =1000MHz) Trilithic 23042 9829213 28-Oct-13 Horn Antenna EMCO 3115 9002-3351 11-May-13 Active Loop Antenna EMCO 6502 9107-2651 19-Apr-13 FSP 30 Spectrum Analyser R & S FSP 30 100007 16-Sep-12 RF Voltage Probe Schwarzbeck TK9416 None 10-Feb-13 LISN R&S ESH3-Z5 849876/026 06-Jan-13 Double Shield Cable Radiall RG142 Nil 23-Aug-12 Pulse Limiter R&S ESH3-Z2 Nil 03-Jun-13 www.tuv.com Test Report No.: 14029350 001 Date: 05.06.2012 Page 6 of 14 General Product Information Product Function and Intended Use The equipment under test (EUT) is a remote control of home automation system. It is able to control the wireless enabled equipment at the home. It uses 908.4MHz as a communication channel. There is only one frequency channel in this product. FCC ID: M7N-BW8030US Model Product description BW8030US, BW8031US, BW8032US, BW8033US Zwave Thermostat The 4 models listed in the above table are identical in construction including schematics, PCB layouts and electronic components except a change in Cosmetic and Mechanical dimension are same. Model BW8030US was selected as a representative for testing. Ratings and System Details Transmitter Operating Frequencies : 908.4MHz Number of channels : 1 Type of antenna : Integral antenna Power supply : 6.0VDC, 4 x AA size batteries; or 24VAC Ports : Yes www.tuv.com Test Report No.: 14029350 001 Date: 05.06.2012 Page 7 of 14 Independent Operation Modes The basic operation modes are: - Control of home electrical product - Others, please refer to user manual for further details Submitted Documents The submitted documents are listed as follow: - Circuit diagram - Block diagram - Bill(s) of material - User manual - FCC ID label Related Submittal(s) Grants This is a single application for certification of the transmitter. www.tuv.com Test Report No.: 14029350 001 Date: 05.06.2012 Page 8 of 14 Test Set-up and Operation Mode Principle of Configuration Selection Emission: The equipment under test (EUT) was configured to measure its highest possible radiation level. The test modes were adapted accordingly in reference to the instructions for use. Test Operation and Test Software Test operation should refer to test methodology. - There is a multi-function button to exercise th…

Text truncated - open the document above for the full version.

www.tuv.com Test Report No.: 14029350 001 Date: 05.06.2012 Page 2 of 14 Test Summary Conducted Emission Result: Pass 20dB bandwidth Result: Pass Radiated Emission of Carrier Frequency Result: Pass Spurious Radiated Emissions Result: Pass www.tuv.com Test Report No.: 14029350 001 Date: 05.06.2012 Page 3 of 14 Contents General Remarks ...................................................................................................4 List of Test and Measurement Instruments.........................................................5 General Product Information ................................................................................6 Product Function and Intended Use.............................................................................................6 Ratings and System Details...........................................................................................................6 Independent Operation Modes......................................................................................................7 Submitted Documents ...................................................................................................................7 Related Submittal(s) Grants ..........................................................................................................7 Test Set-up and Operation Mode..........................................................................8 Principle of Configuration Selection ............................................................................................8 Test Operation and Test Software ................................................................................................8 Special Accessories and Auxiliary Equipment ............................................................................8 Countermeasures to achieve EMC Compliance ..........................................................................8 Test Methodology ..................................................................................................9 Radiated Emission..........................................................................................................................9 Field Strength Calculation .............................................................................................................9 Test Results .........................................................................................................10 Conducted Emission Section 15.207 ......................................................................................10 20dB Bandwidth Section 15.215(c) .........................................................................................11 Radiated Emission of Carrier Frequency Section 15.249(a)..................................................12 Spurious Radiated Emissions Section 15.249(a, c, d, e) .......................................................13 Appendix 1: Test Results Appendix 2: Test Setup Appendix 3: EUT External Photo Appendix 4: EUT Internal Photo Appendix 5: Block Diagram, FCCID Label, Schematics and User manual. www.tuv.com Test Report No.: 14029350 001 Date: 05.06.2012 Page 4 of 14 General Remarks Nil. www.tuv.com Test Report No.: 14029350 001 Date: 05.06.2012 Page 5 of 14 List of Test and Measurement Instruments Hong Kong Productivity Council (Registration number: 90656) Equipment Manufacturer Type S/N Due Date Semi-anechoic Chamber Frankonia Nil Nil 25-May-13 Test Receiver R & S ESU40 100190 26-May-13 Bi-conical Antenna R & S HK116 100241 05-May-13 Log Periodic Antenna R & S HL223 841516/020 06-May-13 Coaxial cable 50ohm Rosenberger RTK081-05S- 05S-10m LA2-001-10M / 001 15-Nov-13 Microwave amplifer 0.5- 26.5GHz, 25dB gain HP 83017A 3950M00241 03-Oct-13 High Pass Filter (cutoff freq. =1000MHz) Trilithic 23042 9829213 28-Oct-13 Horn Antenna EMCO 3115 9002-3351 11-May-13 Active Loop Antenna EMCO 6502 9107-2651 19-Apr-13 FSP 30 Spectrum Analyser R & S FSP 30 100007 16-Sep-12 RF Voltage Probe Schwarzbeck TK9416 None 10-Feb-13 LISN R&S ESH3-Z5 849876/026 06-Jan-13 Double Shield Cable Radiall RG142 Nil 23-Aug-12 Pulse Limiter R&S ESH3-Z2 Nil 03-Jun-13 www.tuv.com Test Report No.: 14029350 001 Date: 05.06.2012 Page 6 of 14 General Product Information Product Function and Intended Use The equipment under test (EUT) is a remote control of home automation system. It is able to control the wireless enabled equipment at the home. It uses 908.4MHz as a communication channel. There is only one frequency channel in this product. FCC ID: M7N-BW8030US Model Product description BW8030US, BW8031US, BW8032US, BW8033US Zwave Thermostat The 4 models listed in the above table are identical in construction including schematics, PCB layouts and electronic components except a change in Cosmetic and Mechanical dimension are same. Model BW8030US was selected as a representative for testing. Ratings and System Details Transmitter Operating Frequencies : 908.4MHz Number of channels : 1 Type of antenna : Integral antenna Power supply : 6.0VDC, 4 x AA size batteries; or 24VAC Ports : Yes www.tuv.com Test Report No.: 14029350 001 Date: 05.06.2012 Page 7 of 14 Independent Operation Modes The basic operation modes are: - Control of home electrical product - Others, please refer to user manual for further details Submitted Documents The submitted documents are listed as follow: - Circuit diagram - Block diagram - Bill(s) of material - User manual - FCC ID label Related Submittal(s) Grants This is a single application for certification of the transmitter. www.tuv.com Test Report No.: 14029350 001 Date: 05.06.2012 Page 8 of 14 Test Set-up and Operation Mode Principle of Configuration Selection Emission: The equipment under test (EUT) was configured to measure its highest possible radiation level. The test modes were adapted accordingly in reference to the instructions for use. Test Operation and Test Software Test operation should refer to test methodology. - There is a multi-function button to exercise th…

Text truncated - open the document above for the full version.

www.tuv.com Test Report No.: 14029350 001 Date: 05.06.2012 Page 2 of 14 Test Summary Conducted Emission Result: Pass 20dB bandwidth Result: Pass Radiated Emission of Carrier Frequency Result: Pass Spurious Radiated Emissions Result: Pass www.tuv.com Test Report No.: 14029350 001 Date: 05.06.2012 Page 3 of 14 Contents General Remarks ...................................................................................................4 List of Test and Measurement Instruments.........................................................5 General Product Information ................................................................................6 Product Function and Intended Use.............................................................................................6 Ratings and System Details...........................................................................................................6 Independent Operation Modes......................................................................................................7 Submitted Documents ...................................................................................................................7 Related Submittal(s) Grants ..........................................................................................................7 Test Set-up and Operation Mode..........................................................................8 Principle of Configuration Selection ............................................................................................8 Test Operation and Test Software ................................................................................................8 Special Accessories and Auxiliary Equipment ............................................................................8 Countermeasures to achieve EMC Compliance ..........................................................................8 Test Methodology ..................................................................................................9 Radiated Emission..........................................................................................................................9 Field Strength Calculation .............................................................................................................9 Test Results .........................................................................................................10 Conducted Emission Section 15.207 ......................................................................................10 20dB Bandwidth Section 15.215(c) .........................................................................................11 Radiated Emission of Carrier Frequency Section 15.249(a)..................................................12 Spurious Radiated Emissions Section 15.249(a, c, d, e) .......................................................13 Appendix 1: Test Results Appendix 2: Test Setup Appendix 3: EUT External Photo Appendix 4: EUT Internal Photo Appendix 5: Block Diagram, FCCID Label, Schematics and User manual. www.tuv.com Test Report No.: 14029350 001 Date: 05.06.2012 Page 4 of 14 General Remarks Nil. www.tuv.com Test Report No.: 14029350 001 Date: 05.06.2012 Page 5 of 14 List of Test and Measurement Instruments Hong Kong Productivity Council (Registration number: 90656) Equipment Manufacturer Type S/N Due Date Semi-anechoic Chamber Frankonia Nil Nil 25-May-13 Test Receiver R & S ESU40 100190 26-May-13 Bi-conical Antenna R & S HK116 100241 05-May-13 Log Periodic Antenna R & S HL223 841516/020 06-May-13 Coaxial cable 50ohm Rosenberger RTK081-05S- 05S-10m LA2-001-10M / 001 15-Nov-13 Microwave amplifer 0.5- 26.5GHz, 25dB gain HP 83017A 3950M00241 03-Oct-13 High Pass Filter (cutoff freq. =1000MHz) Trilithic 23042 9829213 28-Oct-13 Horn Antenna EMCO 3115 9002-3351 11-May-13 Active Loop Antenna EMCO 6502 9107-2651 19-Apr-13 FSP 30 Spectrum Analyser R & S FSP 30 100007 16-Sep-12 RF Voltage Probe Schwarzbeck TK9416 None 10-Feb-13 LISN R&S ESH3-Z5 849876/026 06-Jan-13 Double Shield Cable Radiall RG142 Nil 23-Aug-12 Pulse Limiter R&S ESH3-Z2 Nil 03-Jun-13 www.tuv.com Te…

Text truncated - open the document above for the full version.