M8CRFBL7207TRF Transmitter

OFF SPEED FOR/REV MODE SPEED Button FOR/REV Button MODE Button FAN ON/OFF Button LIGHT ON/OFF/ DIM Button Fig1. RFBL7027 Key Option Table1. Key Option Description Key Pad Option FAN ON/OFF Button SPEED Button FOR/REV Button MODE Button LIGHT ON/OFF/DIM Button ENABLE LAMP DELAY OFF LIGHT DIMMER DISABLE LAMP DELAY OFF Press LAMP ON LAMP OFF LIGHT DIMMER LIGHT DIMMER PressPress LIGHT DIMMER Press Over 1sec & Hold LAMP DARK LAMP LIGHT DIP SW adjust the channel to select different code to each receiver change the light function If it at on side the light can be dimmer Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user ’s authority to operate the equipment.

電話 886-4-23391802 傳真 886-4-23399374 統一編號 84430243 協記精密工業股份有限公司 FEGO Precision Industrial Co., Ltd. 台中縣霧峰鄉 413 林森路 947 號 947 Lin-Sen Rd. Wu-Fong Tai-Chung 413 Taiwan ROC AGENCY AUTHORIZATION LETTER To whom it may concern: We, the undersigned FEGO Precision Industrial Co., Ltd , hereby authorize Max Light Technology Co. Ltd. (MLT) of Taiwan to act on our behalf in all matters relating to all processes required in the FCC Part 15 approval and any communication needed with the national authority. Any and all acts carried out by MLT on our behalf shall have the same effects as acts of our own. For questions regarding the authorization, please contact us. Thank you! Sincerely yours, _____________________________________ (Signature) Original written signature of authorized signer: Bruce Chang / President Printed name of authorized signer / Title Date: Oct. 05, 2011

電話 886-4-23391802 傳真 886-4-23399374 統一編號 84430243 協記精密工業股份有限公司 FEGO Precision Industrial Co., Ltd. 台中縣霧峰鄉 413 林森路 947 號 947 Lin-Sen Rd. Wu-Fong Tai-Chung 413 Taiwan ROC Date: 05 October, 2011 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Permanent Confidentiality request for FCC ID: M8CRFBL7207T To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47, the applicant requests permanent confidential treatment of the following information accompanying this application: Block Diagrams Schematics Operational Descriptions The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely, Bruce Chang / President _____________________________ (Signature)

Report Number: MLT1106P15001 Photograph of EUT

Report Number: MLT1106P15001 Label Format: Label Position: Equipment Label 23mmX50mm Rear View

Report Number: MLT1106P15001 Report Number: MLT1106P15001

Page: 1/ 27 Report Number: MLT1106P15001 (FCC : Part 15 Subpart C / ANSI C63.4-2003) Product : RF Transmitter Trade Name : FEGO Model No. : RFBL7207T Applicant : FEGO Precision Industrial Co., Ltd Applicant Address : 947 Lin-Sen Rd. Wu-Fong Tai-Chung 413 Taiwan ROC Page: 2/ 27 Report Number: MLT1106P15001 Report Number MLT1106P15001 Applicant FEGO Precision Industrial Co., Ltd. Product RF Transmitter Sample Received Date 2011/06/24 Report Prepared By Jesse Tien Signature Date Prepared 2011/06/27 ～ 2011/09/20 Report Authorized By Roger Chen Signature Date Authorized 2011/09/21 Test By Max Light Technology Co., Ltd. Room 5, 8F, No.125, Section 3 Roosevelt Road, Taipei, Taiwan., R.O.C. Office : Tel: 886-2-2363-2447 Fax: 886-2-2363-2597 Lab. : Tel: 886-2-2663-3486 Fax: 886-2-2663-3582 I I t t m m a a y y b b e e d d u u p p l l i i c c a a t t e e d d c c o o m m p p l l e e t t e e l l y y f f o o r r l l e e g g a a l l u u s s e e w w i i t t h h t t h h e e a a l l l l o o w w a a n n c c e e o o f f t t h h e e a a p p p p l l i i c c a a n n t t . . I I t t s s h h a a l l l l n n o o t t b b e e r r e e p p r r o o d d u u c c e e d d e e x x c c e e p p t t i i n n f f u u l l l l , , w w i i t t h h o o u u t t t t h h e e w w r r i i t t t t e e n n a a p p p p r r o o v v a a l l o o f f o o u u r r l l a a b b o o r r a a t t o o r r y y . . Page: 3/ 27 Report Number: MLT1106P15001 Table of Contents : 1. General 5. 2. Conducted Emissions Requirements 7 3. Radiated Emissions Requirements 8. 4. Transmitter Bandwidth Measurements 18. 5. Transmitter Duty Cycle Measurements 20. 6. Verification of De-activation after 5 seconds 24. Appendix I ( EUT Test Setup ) 26. Appendix II ( Brand / Trade Name & Model No. Multiple Listee ) 27. Page: 4/ 27 Report Number: MLT1106P15001 CERTIFICATION We here by verify that : The test data, data evaluation, test procedures and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4-2003. All test were conducted by MLT(Max Light Technology Co., Ltd) Room 5, 8F, No.125, Section 3 Roosevelt Road, Taipei, Taiwan, R.O.C Also, we attest to the accuracy of each. We further submit that the energy emitted by the sample EUT tested as described in the report is in compliance with radiated emission limit of FCC Rules Part 15 Subpart C Section 15.231. Applicant Name FEGO Precision Industrial Co., Ltd. Applicant Address 947 Lin-Sen Rd. Wu-Fong Tai-Chung 413 Taiwan ROC Manufacturer Name FEGO Precision Industrial Co., Ltd. Manufacturer Address 947 Lin-Sen Rd. Wu-Fong Tai-Chung 413 Taiwan ROC Equipment RF Transmitter Model No RFBL7207T FCC ID M8CRFBL7207T Report Prepared By Jesse Tien Signature Report Authorized By Roger Chen Signature Page: 5/ 27 Report Number: MLT1106P15001 1. GENERAL 1.1 Introduction The following measurement report is submitted on behalf of FEGO Precision Industrial Co., Ltd In support of an Intentional Periodic Radiator certification in accordance with Part 2 Subpart J and Part 15 Subpart A and C of the Commission’s and Regulations. 1.2 Customer Details Applicant Name FEGO Precision Industrial Co., Ltd. Applicant Address 947 Lin-Sen Rd. Wu-Fong Tai-Chung 413 Taiwan ROC Manufacturer Name FEGO Precision Industrial Co., Ltd. Manufacturer Address 947 Lin-Sen Rd. Wu-Fong Tai-Chung 413 Taiwan ROC 1.3 Technical data of EUT Equipment RF Transmitter Model No RFBL7207T FCC ID M8CRFBL7207T Power Type Powered by 3V Battery (AAA Size X2) The EUT (RFBL7207T) is remote transmitter. The operation frequency is 433.9MHz. Press the button on remote transmitter, can set the SPEED / FOR(REV) / MODE / ON(OFF) / LIGHT function. 1.4 Description of Support Equipment The EUT itself forms a system. No support equipment is required for its normal operation. Page: 6/ 27 Report Number: MLT1106P15001 1.5 Configuration of System Under Test 1.6 Test Procedure All measurements contained in this report were performed according to the techniques described in Measurement procedure ANSI C63.4: 2003 "Measurement of Intentional Radiators." 1.7 General Test Condition The conditions under which the EUT operates were varied to determine their effect on the equipment's emission characteristics. The final configuration of the test system and the mode of operation used during these tests was chosen as that which produced the highest emission levels. However, only those conditions which the EUT was considered likely to encounter in normal use were investigated. EUT Page: 7/ 27 Report Number: MLT1106P15001 2. Conducted Emissions Requirements The EUT operates solely by the battery. According to the rule of Section 15.207(c), the EUT exempt to the power line conducted test. Page: 8/ 27 Report Number: MLT1106P15001 3. Radiated Emissions Requirements 3.1 General Configuration: Prior to open-field testing, the EUT was placed in a shielded enclosure and scanned at a close distance to determine its emission characteristics. The physical arrangement of the EUT was varied (within the scope of arrangements likely to be encountered in actual use) to determine the effect on the unit's emanations in amplitude, directivity, and frequency. The exact system configuration which produced the highest emissions was noted so it could be reproduced later during the open-field tests. This was done to ensure that the final measurements would demonstrate the worst-case interference potential of the EUT. 3.2 General Configuration: Final radiation measurements were made on a three-meter, open-field test site. The EUT system was placed on a nonconductive turntable which is 0.8 meters height, top surface 1.0 x 1.5 meter. The spectrum was examined from 250 MHz to 2.5 GHz in order to cover the whole spectrum below 10th harmonic which could generate from the EUT. During the test, EUT was set to transmit continuously & Measurements spectrum range from 30 MHz to5 GHz is investigated. For measurements below 1 GHz the resolution bandwidth is set to 100 kHz for peak detection me…

Text truncated - open the document above for the full version.

Report Number: MLT1106P15001 Photograph of Radiated Measurement Front View of The Test Configuration Rear View of The Test Configuration