MZV-H5401B1.9GHz DECT Cordless Accessory Phone

TC25423, TC25424, or TC25425 base units. Model TCH5401 2 Equipment Approval Information Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. This product meets the applicable Industry Canada technical specifications. Notes • This equipment may not be used on coin service provided by the telephone company. • Party lines are subject to state tariffs, and therefore, you may not be able to use your own telephone equipment if you are on a party line. Check with your local telephone company. • Notice must be given to the telephone company upon permanent disconnection of your telephone from your line. • If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this product does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. 2 Rights of the Telephone Company Should your equipment cause trouble on your line which may harm the telephone network, the telephone company shall, where practicable, notify you that temporary discontinuance of Important Information 1 Notification to the Local Telephone Company This equipment complies with Part 68 of the FCC rules and the requirements adopted by the The Ringer Equivalence Number (REN) for this terminal equipment is [to be filled with corresponding REN]. The REN is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices does not exceed five. ACTA. On the [insert location of the label] of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company. The REN is useful in determining the number of devices you may connect to your telephone line and still have all of these devices ring when your telephone number is called. In most (but not all) areas, the sum of the RENs of all devices connected to one line should not exceed 5. To be certain of the number of devices you may connect to your line as determined by the REN, you should contact your local telephone company. The REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). 3 The telephone company may make changes in its communications facilities, equipment, operations or procedures where such action is required in the operation of its business and not inconsistent with FCC Rules and Regulations. If these changes are expected to affect the use or performance of your telephone equipment, the telephone company must give you adequate notice, in writing, to allow you to maintain uninterrupted service. Interference Information This device complies with Part 15 of the FCC Rules and the Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Privacy of Communications may not be ensured when using this product. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna (that is, the antenna for radio or television that is “receiving” the interference). • Reorient or relocate and increase the separation between the telecommunications equipment and receiving antenna. • Connect the telecommunications equipment into an outlet on a circuit different from that to which the receiving antenna is connected. If these measures do not eliminate the interference, please consult your dealer or an experienced radio/television technician for additional suggestions. Also, the Federal Communications Commission has prepared a helpful booklet, “How To Identify and Resolve Radio/TV Interference Problems.” This booklet is available from the U.S. Government Printing Office, Washington, D.C. 20402. Please specify stock number 004-000-00345-4 when ordering copies. Notice: The changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Important Information service may be required. Where prior notice is not practicable and the circumstances warrant such action, the telephone company may temporarily discontinue service immediately. In case of such temporary discontinuance, the telephone company must: (1) promptly notify y…

Text truncated - open the document above for the full version.

INTERTEK TESTING SERVICES External Photos FCC ID: MZV-H5401B IC: 3921A-H5401Bexternal photos - 1 of 3 Job Number HK14071330 Job Number HK14071330 INTERTEK TESTING SERVICES External Photos FCC ID: MZV-H5401B IC: 3921A-H5401Bexternal photos - 2 of 3 INTERTEK TESTING SERVICES External Photos FCC ID: MZV-H5401B IC: 3921A-H5401Bexternal photos - 3 of 3

MODEL: H5401RE1-B FCC ID: MZV-H5401B MADE IN CHINA FABRIQUE EN CHINE REV.6 8-25-14 TO REDUCE RISK OF FIRE OR PERSONAL INJURY, USE ONLY BATTERY LISTED IN USER BOOK. AFIN DE REDUIRE LES RISQUES D'INCENDIE ET DE BLESSURE, UTILISER SEULEMENT LA PILE INDIQUEE DANS LE GUIDE DE L'UTILISATEUR. S / N O . : 4 0 0 0 0 0 0 1 5 4 2 6 T H MODEL:H5401RE1-B FCC ID:MZV-H5401B MADE IN CHINA POWER 8V AC H5401RE1-B 5426TH S/NO.: 40000001 S/NO.: 40000001 4526TH 交货惠州： 交货广州： 4001332 4001331 4001332 This unit is to be used only with model 25423, 25424 and 25425. US: 3F8KH00BH5401RE1-B MADE IN CHINA FABRIQUE EN CHINE H5401RE1-B DATE CODE: 4526TH MODEL: H5401RE1-B Date code label on gift box 4001332 交货惠州： 交货广州： 4001332 4001331 MODEL: H5401RE1-B

INTERTEK TESTING SERVICES Internal photos FCC ID: MZV-H5401B IC: 3921A-H5401B internal photos - 1 of 9 External RF module assembly (View 1) External RF module assembly (View 2) INTERTEK TESTING SERVICES Internal photos FCC ID: MZV-H5401B IC: 3921A-H5401B internal photos - 2 of 9 External RF module To-Host PCB solder side External RF module To-Host PCB comp side INTERTEK TESTING SERVICES Internal photos FCC ID: MZV-H5401B IC: 3921A-H5401B internal photos - 3 of 9 External RF module Main PCB solder side External RF module Main PCB comp side (View 1) INTERTEK TESTING SERVICES Internal photos FCC ID: MZV-H5401B IC: 3921A-H5401B internal photos - 4 of 9 External RF module Main PCB comp side (View 2) External RF module – DECT Oscillator PCB comp side INTERTEK TESTING SERVICES Internal photos FCC ID: MZV-H5401B IC: 3921A-H5401B internal photos - 5 of 9 External RF module – DECT Oscillator PCB XTAL INTERTEK TESTING SERVICES Internal photos FCC ID: MZV-H5401B IC: 3921A-H5401B internal photos - 6 of 9 Han dset assembly Handset Main PCB comp side (View 1) INTERTEK TESTING SERVICES Internal photos FCC ID: MZV-H5401B IC: 3921A-H5401B internal photos - 7 of 9 Handset Main PCB c omp side (View 2) Handset Main PCB display side (View 1) INTERTEK TESTING SERVICES Internal photos FCC ID: MZV-H5401B IC: 3921A-H5401B internal photos - 8 of 9 Han dset Main PCB display side (View 2) Handset DECT Oscillator PCB comp side INTERTEK TESTING SERVICES Internal photos FCC ID: MZV-H5401B IC: 3921A-H5401B internal photos - 9 of 9 Handset DECT Oscillator P CB XTAL

Report No.: 14071333HKG-001 Page 1 of 81 - The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. - This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com Specific Absorption Rate (SAR) Evaluation Report For DECT 6.0 Cordless Accessory Phone Handset Unit Brand Name: Telefield, RCA, RCA By Telefield Model Number: H5401RE1-B, TCH5401RE1-B FCC ID: MZV-H5401B Test Report: 14071333HKG-001 Date of Report: 09 December, 2014 Prepared for Telefield Ltd. Flat D,2/F ,Valiant Industrial Centre,2-12 Au Pui Wan Street, Fo Tan, New Territories, Hong Kong Prepared and Checked by: Approved by: Chan Chun Foo, Bike Senior Lead Engineer Date: 09 December, 2014 Nip Ming Fung, Melvin Assistant Manager Date: 09 December, 2014 Report No.: 14071333HKG-001 Page 2 of 81 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com Table of Contents 1 Test Result Summary.................................................................................................. 3 2 General Information..................................................................................................... 4 3 Measurement System Description and Procedure ...................................................... 7 4 Tissue Verificaiton .....................................................................................................15 5 SAR Measurement System Verification.................................................................... 17 6 SAR Evaluation......................................................................................................... 19 7 Test Insturments........................................................................................................ 25 8 Measurement Uncertainty .......................................................................................... 26 9 E-Field Probe and Dipole Antenna Calibration ........................................................... 26 10 References ............................................................................................................... 26 APPENDIX A – System Verification Data...................................................................... 27 APPENDIX B – SAR Evaluation Data ........................................................................... 29 APPENDIX C – E-Field Probe and Dipole Antenna Calibration.....................................34 APPENDIX D – SAR Tissue Specification.................................................................... 80 APPENDIX E – SAR System Validation........................................................................ 81 Report No.: 14071333HKG-001 Page 3 of 81 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com 1. Test Result Summary *Note: 1. Model: TCH5401RE-B is the same as the Model: H5401RE-B in hardware aspect. The difference in model number serves as marketing strategy and for color change, cosmetic details and trade name only. The maximum spatial peak SAR value for the sample device averaged over 1g was found to be: Highest Reported SAR Band Operating Mode TX Frequency (MHz) 1 g Head 1g Body-Worn 1.9GHz DECT Voice 1921.536 – 1928.448 0.026 W/kg 0.029 W/kg This wireless portable device has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment / general population exposure limits specified in ANSI/IEEE C95.1. Applicant : Telefield Ltd. Applicant Address : Flat D,2/F ,Valiant Industrial Centre, 2-12 Au Pui Wan Street, Fo Tan, New Territories, Hong Kong Model : H5401RE1-B, TCH5401RE1-B Brand Name : Telefield, RCA, RCA By Telefield EUT Description : DECT 6.0 Cordless Accessory Phone Handset Unit Exposure Category : General Population/Uncontrolled Exposure Test Device : Production Unit Date of Sample Received : 31 July, 2014 Date of Test : 12 August, 2014 Date of Report : 09 December, 2014 Place of Testing : Intertek Testing Services Hong Kong 5/F, Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong Temperature: +20 to 25°C Environmental Conidtions : Humidity 30 to 70% Test Specification : ANSI/IEEE C95.1: 1992 IEEE Std 1528: 2003 IEEE Std 1528a: 2005 FCC KDB Publication 447498 D01 v05r02 FCC KDB Publication 865664 D01 v01r03 FCC KDB Publication 865664 D02 v01r01 FCC KDB Publication 648474 D04 v01r02 Report No.: 14071333HKG-001 Page 4 of 81 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com 2. General Information 2.1. Description of Equipment under test (EUT) *Note: 1. DECT has a TDD/TDMA frame structure with a complete frame of 10ms duration with 2…

Text truncated - open the document above for the full version.

INTERTEK TESTING SERVICES FCC ID: MZV-H5401B Page of 3 1 Left Cheek Left Tilt INTERTEK TESTING SERVICES FCC ID: MZV-H5401B Page of 3 2 Right Cheek Right Tilt INTERTEK TESTING SERVICES FCC ID: MZV-H5401B Page of 3 3 Back 0mm separation

INTERTEK TESTING SERVICES FCC ID: MZV-H5401B Page 1 of 2 EUT Photo Figure 1 – Handset Unit front view Figure 2 – Handset Unit back view INTERTEK TESTING SERVICES FCC ID: MZV-H5401B Page 2 of 2 Figure 3 – 2.4V 550mAh Ni-MH GPI rechargeable battery front view Figure 4 – 2.4V 550mAh Ni-MH GPI rechargeable battery back view

5. For FCC, the M L declared by manufacturer is 30dB. FCC ID: MZV-H5401B IC: 3921A-H5401B

- Intertek’s standard Terms and Conditions can be obtained at our website: http://www.intertek.com/terms/. - The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. - This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com TEST REPORT Report Number: 14071330HKG-001 Application For Original Grant of 47 CFR Part 15 Certification Single of RSS-213 Issue 2 Equipment Certification Unlicensed Personal Communication Service Devices/ 2 GHz License-exempt Personal Communications Service Devices FCC ID: MZV-H5401B IC: 3921A-H5401B Test Engineer: Approved by: Signed on File Leung Chiu Kuen, Stanley Nip Ming Fung, Melvin Engineer Assistant Manager November 13, 2014 INTERTEK TESTING SERVICES Test Report Number: 14071330HKG-001 Page 1 of 83 FCC ID: MZV-H5401B IC: 3921A-H5401B GENERAL INFORMATION Applicant Name: Telefield Ltd. Applicant Address: Flat D, 2/F.,Valiant Industrial Centre, 2-12 Au Pui Wan Street, Fo Tan, N.T., Hong Kong. FCC Specification Standard: FCC Part 15, October 1, 2012 Edition FCC ID: MZV-H5401B FCC Model(s): H5401RE1-B, H5401, H5401X, H5401XX, H5401XXX, H5401XXX-X, TCH5401, TCH5401X, TCH5401XX, TCH5401XXX, TCH5401XXX-X and TCH5401RE1-B IC Specification Standard: RSS-213 Issue 2, December 2005 RSS-Gen Issue 3, December 2010 IC: 3921A-H5401B IC Model(s): TCH5401RE1-B Type of EUT: Unlicensed Personal Communications Service Devices Description of EUT: 1.9GHz Digital Modulation DECT Cordless Accessory Phone Serial Number: N/A Sample Receipt Date: July 31, 2014 Date of Test: August 12, 2014 to October 17,2014 Report Date: November 13, 2014 Environmental Conditions: Temperature: +10 to 40°C Humidity: 10 to 90% INTERTEK TESTING SERVICES Test Report Number: 14071330HKG-001 Page 2 of 83 FCC ID: MZV-H5401B IC: 3921A-H5401B Table of Contents 1.0 Test Results Summary & Statement of Compliance.............................................. 5 1.1 Summary of Test Results ....................................................................................... 5 1.2 Statement of Compliance ....................................................................................... 7 2.0 General Description................................................................................................. 9 2.1 Product Description ................................................................................................. 9 2.2 Technical Description .............................................................................................. 9 2.3 Test Methodology.................................................................................................. 10 2.4 Test Facility........................................................................................................... 10 3.0 System Test Configuration.................................................................................... 12 3.1 Justification ........................................................................................................... 12 3.2 Conducted Emission Test Configuration ................................................................ 13 3.3 Conducted Monitoring and Operational Test Configuration .................................... 13 3.4 EUT Exercising Software....................................................................................... 13 3.5 Details of EUT and Description of Accessories...................................................... 14 3.6 Measurement Uncertainty ..................................................................................... 14 4.0 Measurement Results............................................................................................ 16 4.1 Antenna Requirement........................................................................................... 16 4.2 Digital Modulation Techniques............................................................................... 16 4.3 Emission Bandwidth.............................................................................................. 17 4.4 Directional Gain of the Antenna ............................................................................. 21 4.5 Peak Transmit Power ............................................................................................ 22 4.6 Power Spectral Density ......................................................................................... 26 4.7 Automatic Discontinuation of Transmission............................................................ 30 4.8 Unwanted Emission Inside the Sub-Band .............................................................. 31 4.9 Emissions Outside the Sub-Band .......................................................................... 37 4.9.1 Radiated Emissions Configuration Photographs ................................................. 38 4.9.2 Radiated Emissions Data ...............................................................................…

Text truncated - open the document above for the full version.

INTERTEK TESTING SERVICES The Worst Case Configuration Photographs - Mode: Transmission FCC ID: MZV-H5401B IC: 3921A-H5401B config photos (radiated emission - base unit) - 1 of 1 Radiated Emission – External RF module on back of Base Unit Front View Rear View INTERTEK TESTING SERVICES The Worst Case Configuration Photographs - Mode: Transmission FCC ID: MZV-H5401B IC: 3921A-H5401B config photos (radiated emission - handset unit) - 1 of 1 Radiated Emission - Handset Unit Front View Rear View INTERTEK TESTING SERVICES The Worst Case Configuration Photographs - Mode: Talk FCC ID: MZV-H5401B IC: 3921A-H5401B config photos (conducted emission) - 1 of 2 Conducted Emission Front View Right Side View INTERTEK TESTING SERVICES The Worst Case Configuration Photographs - Mode: Talk FCC ID: MZV-H5401B IC: 3921A-H5401B config photos (conducted emission) - 2 of 2 Conducted Emission Left Side View