MZV2-5255D1.9GHz DECT 2 Lines Corded and Cordless Phone

2. Press SELECT soft ke y. T here are leve l 1 to Level 5 to showing the contrast strength. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la class e B est conforme à la norme NMB-003 du Canada. For servicing or replacement, you can purchas e a sui table headset through service centre or retailer shop. Pour I'entretien ou le remplacement, vous pouvez acheter un éco u- teur approprié par le centre commercial ou le magasin de détail lant. Privacy of communications may not be ensured when using this phone. T-T104 (GP, 2.4V, 550mAh), Warning: The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. to this unit For body worn operation, the has been tested and cordless handset 1. Press the VOL (- or +) button to scroll to Registration, press S ELECT soft key and then use the VOL (- or +) button to scroll to Remove Handset. “ Unreg- istering” 3. Use the VOL (- or +) button to scroll to L1 or L2, and use the VOL (- or +) button to s croll to your selection. 3. Use the VOL (- or +) button to scroll to L1 or L2, and use the VOL (- or +) button to scroll to your s election. 2. Press the Speaker button, Talk button or Line 1 Or Line 2 softkey NOTE: Although this device will accep t a variety of standard 2.5mm telephone headsets, RCA does not guarantee compatibility with 3rd party devices. Performance may vary depending on the quality of the headset. Use the VOL(- or +) to select the direct line which you want to set and press Select softkey to confirm, then use the VOL (- or +) button to scroll to your selection. Dial softkey NOTE: The line is automatically seized and the number is dialed accordingly. The unit will emit a short beep and then reset automatically. or call 1-800-8-BATTERY Limited WarrantyWhat your warranty covers:• Defects in materials or workmanshipFor how long after your purchase:• Two years, from date of purchaseWhat we will do:• Provide you with a replacement unit. The exchange unit is under warranty for the remainder of the original product's warranty period.How you get service:• Locate your proof of purchase in the form of a bill of sale o r receipted invoice which is evidence that the product is within the warranty period. Proof of warranty eligibility is required and must be presented to obtain warranty service.• Contact RCA Customer Care at (800) 511-3180. Our representatives will help you troubleshoot and diagnose the problem. As you may be asked to disconnect your RCA telephone from it's power source, you must call from another telephone. If the issue cannot be resolved by our Customer Care Team, you will be issued an RMA (Return Merchandise Authorization) number and be given instructions on how to submit your proof-of-purchase paperwork and where to send your defective merchandise.• You will be responsible for shipping the defective unit back You are responsible for damage or loss during shipment so insuring the product during return shipping is highly recommended. • We will ship a replacement to you freight pre-paid. What your warranty does not cover:• Customer instruction. (Your Instruction Book provides information regarding operating instructions and user controls. Additionallyproduct experts that can assist you with any questions that may arise during setup and use of your RCA telephone.)• Installation and setup service adjustments• Batteries• Damage from misuse or neglect• Products that have been modified of serviced outside the USA• Products purchased from non-authorized retailers, dealers or resellers• Products purchased or serviced outside the USA• Acts of nature, such as, but not limited to lightning damage• Please register your product online at www.rca4business.com How state law relates to this warranty:• Some states do not allow the exclusion nor limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts so the above limitations or exclusions may not apply to you.• This warranty gives you specific legal rights, and you also may have other rights that vary from state to state.If you purchased your product outside the USA, Mexico or Canada:This warranty does not apply. Contact your dealer for warranty information. OREGON the line1 and line2 phone numbers shows on the display separately. the unit emit a warning tone and then scroll to the end or the start of the record. OK OK softkey. Empty 4. Then you can press Menu softkey and then use VOL(- or +) to select View and press select softkey to review the direct record. Press Menu soft key and then use VOL(- or +) to select Edit Entry. Mute/Del OK DIR Main Line1 or Line2 Use VOL(- or +) can select Mute/DelYES OK 302 Beaverton, OR 97005 T-T104 (GP, 2.4V, 550mAh) , emitted on the base.

US number, Ringer Equivalence Number (REN), a product identifier in the format US:AAAEQ##TXXXX. The changes or modification to this unit not expressly approved by the party responsible for s 4 FCC RF Radiation Exposure Statement Information for DECT Product base unit cordless handset 5 Equipment Approval Information 2 Interference Information 3 Licensing 3 Hearing Aid Compatibility 3 FCC RF Radiation Exposure Statement 4 Information for DECT Product 4 Introduction 7 Parts Checklist 7 -Telephone Jack Requirements Installation 8 -Digital Security System Important Installation Guidelines 8 Handset Layout 9 Base Layout 10 Installing the Phone 11 -Installing the handset battery 11 -Base Station 12-14 Programming the Phone 15 -Standby Screen 15 -Programming Functions 15 -Phone Setting 15 -Date/Time 16 -Auto Answer 16 -Auto Answer Intercom 16 -Dial Mode 17 -Area Code 17 -Registration 17 -Register 18 -Remove Handset 18 -De-Register 18 -2nd Call Alert 19 -Add Headset 18 -Handset Name 19 -Update Handset List 19 -Display Setting 19 -Contrast 20 -Backlight 20 -Sound Setting 20 -Answering System 21 -VOICE MAIL 21 -On/Off Status 21 -Outgoing Message (OGA) Playback 22 -Set Office Time 22 -Set Work Hours 23 -Set After Hours 23 -Ring Delay 24 -Message Length 24 -Call Screening 24 -Message Alert 24 -Remote Password 25 -Restore Setting 25 Table of Contents Telephone Operation 25 -Making calls with the cordless handset 25 -Making calls with the corded handset (from the base) 25 -Making calls in the speakerphone mode (from the base) 26 -Making calls in the speakerphone mode (from the handset) 26 -Making calls with the optional headset 26 -Pre-dialing 27 -Answering a Call 27 -Switching between the speakerphone, handset & headset mode 27 -Mute 28 -Do not disturb 28 -Flash 28 -Inserting a pause in the dialing sequence 28 -Redial 29 -Reviewing the Redial Numbers 29 -Storing a Redial Record in Directory 29 -Transferring a call to another extension 30 -Receiving a transferred call from another extension 30 -Ringer on/off and ringer volume 30 -Speakerphone, handset and headset volume 30 -Hold 31 -Conference calls 31 Intercom Calls 32 -One-touch /memory log 32 -Answering an intercom call 32 -Page 32 -Auto Standby 32 Caller ID (CID) 33 -Receiving and storing CID records 33 -Reviewing CID records 33 -Saving a CID record to the phone directory 34 -Deleting a CID record 34 -Deleting all call records 34 -Dialing back 34 -Call waiting caller ID 35 Directory & One-Touch Memory 36 -Adding directory entries 36 -Storing a record in the one-touch/memory buttons 36 -Reviewing directory records 37 -Editing a name or number stored in the one-touch/ memory log 37 -Reviewing record in the one-touch/memory 37 -Editing a directory record 37 -Copying a directory record 38 -Deleting a directory record 38 -Deleting all directory records 38 -Deleting a one-touch/memory 39 -Dialing a directory record 39 -Dialing a one-touch memory/record 39 6 Table of Contents Cont. Answering System Operation 40 -Answering system on/off 40 -Recording incoming messages 40 -Monitoring incoming calls 40 -Memo record 41 -Memo recording 41 -Message/memo playback 41 -Erasing messages 42 -Remote access from remote party 42 -Memory full 43 Changing the Battery 43 Battery Safety Precautions 43 Display Messages 44 Handset Sound Signals 45 -Backup battery operation 45 Troubleshooting Guide 46 -Telephone solutions 46 -Caller ID solutions 47 -Battery 47 General Product Care 48 Causes of Poor Reception 48 Warranty Assistance 49 Limited Warranty 50-51 7 Introduction CAUTION: When using telephone equipment , there are basic safety instructions that should always be followed. Refer to the IMPORTANT SAFETY INSTRUCTIONS provided with this product and save them for future reference. IMPORTANT: Because cordless phones operate on electricity, you should have at least one phone in your home that isn’t cordless, in case the power in your home goes out . Corded Handset Handset battery pack Telephone 2- Line cords AC power adaptor (for base) Parts Checklist Short Line Cord Belt Clip Coiled Handset Cord Charging Cradle Telephone Jack Requirements fi fi Modular telephone line jack Wall plate Cordless Handset AC power adaptor (for charging cradle) 7 8 Installation Digital Security System Your cordless phone uses a digital security system to protect against false ringing, unauthorized access, and charges to your phone line. INSTALLATION NOTE: Some cordless telephones operate at frequencies that may cause or receive interference with nearby TVs, microwave ovens, and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV, microwave ovens, or VCR. If such interference continues, move the cordless telephone farther away from these appliances. Certain other communications devices may also use the 1.9 GHz frequency for communication, and, if not properly set , these devices may interfere with each other and/or your new telephone. If you are concerned with interference, please refer to the owner’s manual for these devices on how to properly set channels to avoid interference. Typical devices that may use the 1.9 GHz frequency for communication include wireless audio/video senders, wireless computer networks, multi-handset cordless telephone systems, and some long- range cordless telephone systems. Important Installation Guidelines f  $YRLGVRXUFHVRIQRLVHDQGKHDWVXFKDVPRWRUVflXRUHVFHQWOLJKWLQJPLFURZDYH RYHQVKHDWLQJDSSOLDQFHVDQGGLUHFWVXQOLJKW f  $YRLGDUHDVRIH[FHVVLYHGXVWPRLVWXUHDQGORZWHPSHUDWXUH f  $YRLGRWKHUFRUGOHVVWHOHSKRQHVRUSHUVRQDOFRPSXWHUV f  1HYHULQVWDOOWHOHSKRQHZLULQJGXULQJDOLJKWQLQJVWRUP f  1HYHULQVWDOOWHOHSKRQHMDFNVLQZHWORFDWLRQVXQOHVVWKHMDFNLVVSHFLfiFDOO\GHVLJQHGIRU ZHWORFDWLRQV f  1HYHUWRXFKQRQLQVXODWHGWHOHSKRQHZLUHVRUWHUPLQDOVXQOHVVWKHWHOHSKRQHOLQHKDV EHHQGLVFRQQHFWHGDWWKHQHWZRUNLQWHUIDFH f  8VHFDXWLRQZKHQLQVWDOOL…

Text truncated - open the document above for the full version.

27 Pre-Dialing 1. With the phone idle, manually enter the telephone number. The maximum pre-dialing number length is 32 digits, if the number is over 32 digits, it will emit an error tone. The telephone number shows in the display. 2. Press the DIAL Soft key (on base only), Spk button, Talk button (handset only), or line 1 or line 2 button to take a line, or pick up the corded handset (on the base only) and then the telephone number will be dialed out . Answering a Call For cordless handset: 1. Press the Talk button to answer the call in receiver mode, -OR- 2. Press the Spk button to answer the call in speakerphone mode, -OR- 3. Press the corresponding LINE Soft key to answer the call in receiver mode. 4. When finished, press end button. For the base: 1. Pick up the corded handset , -OR- 2. Press the speaker button to answer the call in speakerphone mode, -OR- 3. Press the corresponding line button to answer the call in speakerphone mode, -OR- 4. Press the headset button on base to answer the call in headset mode. 6. When finished, hang up the corded handset or press Spk button (in speakerphone) or headset button (in headset mode) or press the Talk On/Off button on the cordless headset NOTE: If you have set the Auto Answer as On in the cordless handset , you can answer the call directly by picking up this handset from the charger, without pressing any buttons. NOTE: Adjust the volume by pressing the vol (- or +) button during a call. Switching Between the Speakerphone, Handset and Headset Mode Base To switch to the speakerphone, press speaker button. The speakerphone indicator illuminates. Place the corded handset back into the cradle. To switch to the corded handset , pick up the handset . The speakerphone or corded headset indicator will turn off. 5. Press the Talk On/Off button on the cordless headset (only applicable for RCA 25065RE1). (only applicable for RCA 25065RE1) to end the call. 29 Redial  3UHVVWKHTalkEXWWRQRQWKHFRUGOHVVKDQGVHWRUSUHVVWKHSpkEXWWRQ VSHDNHUSKRQH PRGH RUSUHVVWKHheadsetEXWWRQ KHDGVHWPRGH RUSLFNXSWKHFRUGHGKDQGVHW IURPWKHEDVHDQGWKHfiUVWDYDLODEOHOLQHZLOOJRRIIKRRN,IERWKOLQHVDUHDYDLODEOH/LQH ZLOOEHXVHG 25 3UHVVDlineEXWWRQWRVHOHFWDOLQH  3UHVVWKHredialEXWWRQ7KHUHGLDOQXPEHUOLVW ODVWSUHYLRXVO\GLDOHGQXPEHUV LV VKRZQ  8VHWKHVOL RU EXWWRQWRVHOHFWWKHQXPEHU3UHVVWKHDIAL6RIWNH\WRGLDORXWWKH QXPEHU NOTE: If the number you dialed is longer than 32 digitals, It will not be saved in the redial list and can't be redialed. Reviewing the Redial Numbers <RXUSKRQHUHFRUGVXSWRWKUHHSUHYLRXVO\GLDOHGSKRQHQXPEHUV  :KHQWKHSKRQHLVLGOHSUHVVWKHredialEXWWRQ  8VHWKHVOL RU EXWWRQWRYLHZWKHODVWWKUHHSUHYLRXVO\GLDOHGQXPEHUV  :KLOHWKHSUHIHUUHGQXPEHULVGLVSOD\HGSUHVVWKHSpkTalkDlineEXWWRQ RUSLFNXS WKHFRUGHGKDQGVHWWRGLDOWKHSKRQHQXPEHU NOTE: If you do not select a line button, the line is automatically seized and the number is dialed accordingly. Storing a Redial Record in Directory  0DNHVXUHWKHSKRQHLVOFF QRWLQ7DONPRGH   3UHVVWKHredialEXWWRQWKHQXVHWKHVOL RU EXWWRQWRVFUROOWRWKHGHVLUHGUHGLDO QXPEHU  3UHVVWKHSAVE6RIWNH\  7KHVFUHHQGLVSOD\VEnter Name,QSXWDQDPH E\SUHVVLQJWKHNH\SDG NOTE: More than one letter is stored in each of the number keys so it requires more than one press for some letters. For example, for the letter “B” press the number 2 key twice. To add a space press the 1 key. NOTE: A name must be input otherwise the record cannot be stored.  3UHVVWKHSAVE6RIWNH\7KHGHVLUHGUHGLDOQXPEHUVKRZVLQWKHGLVSOD\  <RXFDQHGLWWKHWHOHSKRQHQXPEHUE\XVLQJWKHdeleteEXWWRQDQGQXPEHUNH\V  3UHVVSAVE6RIWNH\WRHQWHUWKH9,37RQH0HORG\VHOHFWLRQ  8VHVOL RU EXWWRQWRVFUROOWRWKHGHVLUHGULQJWRQHPHORG\DQGSUHVVSELECT6RIW NH\WRFRPSOHWH NOTE: If an incoming call number matches this record the VIP Tone Melody will ring. 30 Transferring a Call to Another Extension 1. Press XFER Soft key when the phone is in Talk mode. The current call is put on hold. 2. Use VOL (- or +) to select the desired handset or base you want to transfer to, and then press the SELECT Soft key. 3. The unit will intercom ring the selected handset or base. Wait until the selected handset or base answers the intercom call and have a conversation and then hang up to finish the transfer or press Conference to have a 3 way conference call. 4. If the selected unit rejects the intercom call, or the call is not answered within 30 seconds, the call is transferred back to the original unit and the display will show as below a) or b) Receiving a Transferred Call from Another Extension If the unit receives a transfer call paging, Intercom call from base/Handset X shows in the display. Press the Talk button (handset only) or speaker button (both base and handset) or leave the corded handset on the base unit to answer the call. If you press the REJECT Soft key or the call is not answered within 30 seconds, the intercom paging will be stopped and the call is transferred back to the original unit. Ringer On/Off and Ringer Volume 1. Make sure the phone is in idle mode. 2. Press the VOL (- or +) button to activate the ringer volume setting. Press Line1 or Line2 button to select the direct line which you want to set, then use the VOL (- or +) button to scroll to your selection. The default setting is VOL 3. 3. Press the SELECT Soft key to save your selection. NOTE: If you choose the ringer OFF, the screen displays L1/L2 RINGER OFF. Speakerphone, Handset , and Corded Headset V olume While the phone is in use, during the desired mode, press the VOL (+ or -) buttons until you reach a comfortable listening level. The phone stores the setting after the last button pressed. 31 Hold ,Q7DONPRGHSUHVVWKHholdEXWWRQWRKROGWKHOLQHLine X ON HOLD VKRZVLQWKH/&' GLVSOD\…

Text truncated - open the document above for the full version.

INTERTEK TESTING SERVICES External Photos FCC ID: MZV2-5255D IC: 3921A-25255Dexternal photos - 1 of 2 Job Number HK14041816 Job Number HK14041816 INTERTEK TESTING SERVICES External Photos FCC ID: MZV2-5255D IC: 3921A-25255Dexternal photos - 2 of 2

TO REDUCE RISK OF FIRE OR PERSONAL INJURY, USE ONLY BATTERY LISTED IN USER BOOK. AFIN DE REDUIRE LES RISQUES D'INCENDIE ET DE BLESSURE, UTILISER SEULEMENT LA PILE INDIQUEE DANS LE GUIDE DE L'UTILISATEUR. H/S FCC ID LABEL SIZE: 21 * 7.8 mm S/NO. & DATE CODE LABEL SIZE: 14.5 * 5.5 mm S/NO必须有下划线 TF表示广州生产 TH表示惠州生产 S / N O . : 0 0 0 0 0 0 0 1 1 0 2 9 T F APPROVED BY:MADE BY: MODEL: 25055RE1 FCC ID: MZV2-5255D MADE IN CHINA 英文面 向外 IMPORTANT SHEET SIZE: 44 * 100 mm MODEL: 25055RE1-DFILE NAME: Packing25055RE1-D REV: 01 Zhu, aihua 6/30/14 T0008007 (REV.0 E/S) IMPORTANT! CONNECT HANDSET BATTERY. Handset must be charged in the cradle for at least fourteen (14) hours prior to initial use. Periodically clean handset and base charge contacts. See Use Guide for complete instructions. 正（英） T0008007 (REV.0 E/S) ! IMPORTANTE! CONECTE LA BATERIA DEL AURICULAR. El auricular debe ser cargado en la base por al menos catorce (14) horas antes del uso inicial. Limpie period icamentel os contactos de carga del auricular y de la base. Vea la Gu a del Usuario para instrucciones completas. 反（西班牙文） 4001332 CHARGER S/NO. & DATE CODE LABEL SIZE: 52 * 13 mm S/NO. must be the same as BASE, H/S S/NO. DATE CODE must be the same as BASE, Handset Date code. S/NO必须有下划线, TF表示广州生产,TH表示惠州生产 CHARGER MODEL NO. LABEL SIZE: 47*27 mm MODEL: 25055RE1-DFILE NAME: Packing25055RE1-D REV: 03 APPROVED BY:MADE BY: Zhu, aihua 6/17/14 RCA TRADEMARK LABEL SIZE: 25*9mm 交货惠州： 交货广州： 4001332 4001331 POWER 8V AC 25055D 4348TH S/NO.: 30000001 This unit is to be used only with model 25270, 25255, 2525 2521 and . 2,2 25260 MODEL : 25055RE1

APPROVED BY:MADE BY: Label, Serial NO., GZ PRINT Size: 60*14mm S/NO必须有下划线 TF表示广州生产 TH表示惠州生产 交货惠州： 交货广州： 4001332 4001331 Zhu, aihua 6/30/14 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. PRIVACY OF COMMUNICATIONS MAY NOT BE ENSURED WHEN USING THIS PHONE. RCA is a trademark of RCA Trademark Management S.A., used under license. MADE IN CHINA FABRIQUE EN CHINE Base model NO. label Size: 56.5*19mm 25255D 4348TH S/NO.: 30000001 MODEL: 25255RE2 US: 3F8W401B25255 FCC REN: 0.1B FCC ID: MZV2-5255 USOC Jack: RJ14C and RJ11C D D MODEL: 25255RE2-DFILE NAME: Packing25255RE2-D REV: 01 TO REDUCE RISK OF FIRE OR PERSONAL INJURY, USE ONLY BATTERY LISTED IN USER BOOK. AFIN DE REDUIRE LES RISQUES D'INCENDIE ET DE BLESSURE, UTILISER SEULEMENT LA PILE INDIQUEE DANS LE GUIDE DE L'UTILISATEUR. H/S FCC ID LABEL SIZE: 21 * 7.8 mm S/NO. & DATE CODE LABEL SIZE: 14.5 * 5.5 mm S/NO必须有下划线 TF表示广州生产 TH表示惠州生产 S / N O . : 3 0 0 0 0 0 0 1 4 3 4 8 T H APPROVED BY:MADE BY: MODEL: 25255RE2 FCC ID: MZV2-5255D MADE IN CHINA 英文面 向外 IMPORTANT SHEET SIZE: 44 * 100 mm MODEL: 25255RE2-DFILE NAME: Packing25255RE2-D REV: 02 Zhu, aihua 6/30/14 T0008007 (REV.0 E/S) IMPORTANT! CONNECT HANDSET BATTERY. Handset must be charged in the cradle for at least fourteen (14) hours prior to initial use. Periodically clean handset and base charge contacts. See Use Guide for complete instructions. 正（英） T0008007 (REV.0 E/S) ! IMPORTANTE! CONECTE LA BATERIA DEL AURICULAR. El auricular debe ser cargado en la base por al menos catorce (14) horas antes del uso inicial. Limpie period icamentel os contactos de carga del auricular y de la base. Vea la Gu a del Usuario para instrucciones completas. 反（西班牙文） 4001332 CHARGER S/NO. & DATE CODE LABEL SIZE: 52 * 13 mm S/NO. must be the same as BASE, H/S S/NO. DATE CODE must be the same as BASE, H/S Date code. S/NO必须有下划线, TF表示广州生产,TH表示惠州生产 CHARGER MODEL NO. LABEL SIZE: 47*27 mm APPROVED BY:MADE BY: RCA TRADEMARK LABEL SIZE: 25*9mm 交货惠州： 交货广州： 4001332 4001331 POWER 8V AC 25255D 4348TH S/NO.: 30000001 MODEL: 25255RE2-DFILE NAME: Packing25255RE2-D REV: 00 Zhu, aihua 1/17/14 MODEL NO.: 25255RE2

INTERTEK TESTING SERVICES Internal photos FCC ID: MZV2-5255D IC: 3921A-25255D internal photos - 1 of 4 Han dset assembly Handset Main PCB comp side (View 1) INTERTEK TESTING SERVICES Internal photos FCC ID: MZV2-5255D IC: 3921A-25255D internal photos - 2 of 4 Handset Main PCB c omp side (View 2) Handset Main PCB display side (View 1) INTERTEK TESTING SERVICES Internal photos FCC ID: MZV2-5255D IC: 3921A-25255D internal photos - 3 of 4 Han dset Main PCB display side (View 2) Handset Oscillator PCB comp side INTERTEK TESTING SERVICES Internal photos FCC ID: MZV2-5255D IC: 3921A-25255D internal photos - 4 of 4 Han dset Antenna

Report No.: 14041821HKG-001 Page 1 of 81 - The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. - This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com Specific Absorption Rate (SAR) Evaluation Report For 1.9G DECT 2-Line Corded / Cordless Phone (Wireless Handset) Model Number: 25255D, 25055D Brand Name: TELEFIELD, RCA, RCA BY TELEFIELD FCC ID: MZV2-5255D Test Report: 14041821HKG-001 Date of Report: 09 July, 2014 Prepared for Telefield Ltd. Flat D, 2/F.,Valiant Industrial Centre, 2-12 Au Pui Wan Street, Fo Tan, N.T., Hong Kong Prepared and Checked by: Approved by: Chan Chun Foo, Bike Senior Lead Engineer Date: 09 July, 2014 Nip Ming Fung, Melvin Assistant Manager Date: 09 July, 2014 Report No.: 14041821HKG-001 Page 2 of 81 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com Table of Contents 1 Test Result Summary.................................................................................................. 3 2 General Information..................................................................................................... 4 3 Measurement System Description and Procedure ...................................................... 7 4 Tissue Verificaiton ..................................................................................................... 15 5 SAR Measurement System Verification .................................................................... 17 6 SAR Evaluation ......................................................................................................... 19 7 Test Insturments........................................................................................................ 25 8 Measurement Uncertainty .......................................................................................... 26 9 E-Field Probe and Dipole Antenna Calibration ........................................................... 26 10 References ............................................................................................................... 26 APPENDIX A – System Verification Data...................................................................... 27 APPENDIX B – SAR Evaluation Data ........................................................................... 29 APPENDIX C – E-Field Probe and Dipole Antenna Calibration .................................... 58 APPENDIX D – SAR Tissue Specification .................................................................... 80 APPENDIX E – SAR System Validation........................................................................ 81 Report No.: 14041821HKG-001 Page 3 of 81 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com 1. Test Result Summary *Note: 1. Model: 25055D is the same as the Model: 25255D in hardware aspect. The difference in model number serves as marketing strategy and for color change only The maximum spatial peak SAR value for the sample device averaged over 1g was found to be: Highest Reported SAR Band Operating Mode TX Frequency (MHz) 1 g Head 1g Body-Worn 1.9GHz DECT Voice 1921.536 – 1928.448 0.038 W/kg 0.016 W/kg This wireless portable device has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment / general population exposure limits specified in ANSI/IEEE C95.1. Applicant : Telefield Ltd. Applicant Address : Flat D, 2/F.,Valiant Industrial Centre, 2-12 Au Pui Wan Street, Fo Tan, N.T., Hong Kong Model* : 25255D, 25055D Brand Name : TELEFIELD, RCA, RCA BY TELEFIELD EUT Description : 1.9G DECT 2-Line Corded / Cordless Phone (Wireless Handset) Exposure Category : General Population/Uncontrolled Exposure Test Device : Production Unit Date of Sample Received : 13 May, 2014 Date of Test : 22 May, 2014 Date of Report : 09 July, 2014 Place of Testing : Intertek Testing Services Hong Kong 5/F, Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong Temperature: +20 to 25°C Environmental Conidtions : Humidity 30 to 70% Test Specification : ANSI/IEEE C95.1: 1992 IEEE Std 1528: 2003 IEEE Std 1528a: 2005 FCC KDB Publication 447498 D01 v05r01 FCC KDB Publication 865664 D01 v01r03 FCC KDB Publication 865664 D02 v01r01 FCC KDB Publication 648474 D04 v01r02 Report No.: 14041821HKG-001 Page 4 of 81 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com 2. General Information 2.1. Description of Equipment under test (EUT) *Note: 1. DECT has a TDD/TDMA frame structure with a complete frame of 10ms duration with 24 time slots. And under these 24 time slots, the first 12 slots are a…

Text truncated - open the document above for the full version.

INTERTEK TESTING SERVICES FCC ID: MZV2-5255D Page 1 of 3 Figure 1 – Left Cheek Figure 2 – Right Cheek INTERTEK TESTING SERVICES FCC ID: MZV2-5255D Page 2 of 3 Figure 3 - Left Tilt Figure 4 - Right Tilt INTERTEK TESTING SERVICES FCC ID: MZV2-5255D Page 3 of 3 Figure 5 – Back 0mm separation

INTERTEK TESTING SERVICES FCC ID: MZV2-5255D Page 1 of 2 EUT Photo Figure 1 – Handset Unit front view Figure 2 – Handset Unit back view INTERTEK TESTING SERVICES FCC ID: MZV2-5255D Page 2 of 2 Figure 3 – 2.4V 550mAh Ni-MH GPI rechargeable battery front view Figure 4 – 2.4V 550mAh Ni-MH GPI rechargeable battery back view

Issuing Laboratory: Intertek Testing Services Hong Kong Limited HKAS has accredited this laboratory (HOKLAS 005 – TEST) under HOKLAS for specific laboratory activities as listed in the HOKLAS directory of accredited laboratories. Test Report Number: 14041816HKG-002 Page 1 of 62 FCC ID: MZV2-5255D IC: 3921A-25255D Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com GENERAL INFORMATION Applicant Name: Telefield Ltd. Applicant Address: Flat D, 2/F.,Valiant Industrial Centre, 2-12 Au Pui Wan Street, Fo Tan, N.T., Hong Kong. FCC Specification Standard: FCC Part 15, October 1, 2012 Edition FCC ID: MZV2-5255D FCC Model(s): 1. 25255D, 25255X, 25255XX, 25255XXX, 25255XXX-X, TC25255X, TC25255XX, TC25255XXX, TC25255XXX-X, 25055X, 25055XX, 25055XXX, 25055XXX-X, TC25055X, TC25055XX, TC25055XXX and TC25055XXX-X 2. 25270X, 25270XX, 25270XXX, 25270XXX-X, TC25270X, TC25270XX, TC25270XXX and TC25270XXX-X 3. 25252D, 25252X, 25252XX, 25252XXX, 25252XXX-X, TC25252X, TC25252XX, TC25252XXX and TC25252XXX-X 4. 25212D, 25212X, 25212XX, 25212XXX, 25212XXX-X, TC25212X, TC25212XX, TC25212XXX and TC25212XXX-X IC Specification Standard: RSS-213 Issue 2, December 2005 RSS-Gen Issue 3, December 2010 IC: 3921A-25255D IC Model(s): 1. TC25255RE2-D, TC25055RE1-D 2. TC25270RE3-D Type of EUT: Unlicensed Personal Communications Service Devices Description of EUT: 1. 1.9GHz Digital Modulation 2 Lines Corded and Cordless Phone with Caller- ID, Speakerphone and Digital Answering Machine - Handset 2. 1.9GHz Digital Modulation 2 Lines Corded and Cordless Phone with Caller- ID, Speakerphone, Digital Answering Machine and Wireless Headset - Hands…

Text truncated - open the document above for the full version.