MZV2-5252D1.9GHz DECT Cordless Phone - Base

DECT 6.0 2-Line Cordless Intercom Speakerphone User’s Guide 2 Equipment Approval Information Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA. 1 Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment. You must, upon request, provide this information to your telephone company. The REN is useful in determining the number of devices you may connect to your telephone line and still have all of these devices ring when your telephone number is called. In most (but not all) areas, the sum of the RENs of all devices connected to one line should not exceed 5. To be certain of the number of devices you may connect to your line as determined by the REN, you should contact your local telephone company. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. Notes s This equipment may not be used on coin service provided by the telephone company. s Party lines are subject to state tariffs, and therefore, you may not be able to use your own telephone equipment if you are on a party line. Check with your local telephone company. s Notice must be given to the telephone company upon permanent disconnection of your telephone from your line. s If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this product does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. US Number is located on the cabinet bottom REN number is located on the cabinet bottom Important Information Privacy of communications may not be ensured when using this phone. 3 cordless handset Warning: The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. to this unit 5 EQUIPMENT APPROVAL INFORMATION ............. 2 INTERFERENCE INFORMATION ......................... 3 LICENSING ................................................ 4 HEARING AID COMPATIBILITY ....................... 4 FCC RF R ADIATION EXPOSURE STATEMENT .... 4 INFORMATION FOR DECT PRODUCT ............... 4 INTRODUCTION ........................................... 7 PARTS CHECKLIST ....................................... 7 TELEPHONE JACK REQUIREMENTS ................... 7 INSTALLATION ............................................ 8 DIGITAL SECURITY SYSTEM .............................8 IMPORTANT INSTALLATION GUIDELINES ............ 8 HANDSET LAYOUT ...................................... 9 BASE LAYOUT .......................................... 10 INSTALLING THE PHONE ............................. 11 INSTALLING THE HANDSET BATTERY ...............11 BASE STATION ............................................ 12 PROGRAMMING THE PHONE ...................... 14 STANDBY SCREEN ....................................... 14 PROGRAMMING FUNCTIONS ......................... 14 PHONE SETTING .......................................... 15 DATE/TIME ................................................. 15 AUTO ANSWER (ONLY APPLICABLE FOR HANDSET) ........ 16 AUTO ANSWER INTERCOM (APPLICABLE FOR BASE AND HANDSET) ...................................... 16 DIAL MODE (ONLY APPLICABLE FOR BASE) .... 16 AREA CODE (ONLY APPLICABLE FOR BASE) .... 16 REGISTRATION (ONLY APPLICABLE TO HANDSET) 17 REGISTER ................................................... 17 REMOVE HANDSET ...................................... 17 D DDAH EADSET (ONLY APPLICABLE FOR BASE)..18 E-REGISTER (ONLY APPLICABLE FOR BASE) . 17 SECOND CALL ALERT ................................. 18 HANDSET NAME (ONLY APPLICABLE FOR HANDSET)...... 18 UPDATE HANDSET LIST (ONLY APPLICABLE FOR BASE) ................................................... 18 DISPLAY SETTING ........................................ 19 C L ANGUAGE .................................................19 ONTRAST .................................................. 19 BACKLIGHT (ONLY APPLICABLE FOR BASE) ..... 19 SOUND SETTING .........................................19 R R ING TONE..................................................20 ING VOLUME ........................................... 20 K R ESTORE SETTING........................................ 21 V OICE MAIL .............................................. 20 EY TONE .................................................. 20 TELEPHONE OPERATION ............................. 21 MAKING CALLS WITH THE CORDLESS HANDSET 21 MAKING CALLS IN THE SPEAKERPHONE MODE (FROM THE BASE) .................................. 21 MAKING CALL IN THE SPEAKERPHONE MODE (FROM THE HANDSET) ............................ 21 ...... 21 MAKING CALLS WITH A WIRED HEADSET PRE-DIALING .............................................. 22 S WITCHING BETWEEN THE SPEAKERPHONE, HANDSET, AND HEADSET MODE ............ 22 BASE .................................................. 22 C ORDLESS HANDSET ............................. 22 MUTE .................................................. 23 DO NOT DISTURB ....................................... 23 FLASH ........................................................ 23 INSERTING A PAUSE IN THE DIALING SEQUENCE 23 REDIAL ....................................................... 23 REVIEWING THE REDIAL NUMBERS............... 24 STORING A REDIAL RECORD IN PHONE BOOK 24 TRANSFERRING A CALL TO ANOTHER EXTENSION 24 RECEIVING A TRANSFERRED CALL FROM ANOTHER EXTENSION.....…

Text truncated - open the document above for the full version.

DECT 6.0 2-Line Cordless Intercom Speakerphone with Digital Answering System User’s Guide 2 Equipment Approval Information Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA. 1 Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment. You must, upon request, provide this information to your telephone company. The REN is useful in determining the number of devices you may connect to your telephone line and still have all of these devices ring when your telephone number is called. In most (but not all) areas, the sum of the RENs of all devices connected to one line should not exceed 5. To be certain of the number of devices you may connect to your line as determined by the REN, you should contact your local telephone company. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and r equirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. Notes • This equipment may not be used on coin service provided by the telephone company . • Party lines ar e subject to state tariffs, and therefore, you may not be able to use your own telephone equipment if you are on a party line. Check with your local telephone company. • Notice must be given to the telephone company upon permanent disconnection of your telephone from your line. • If your home has specially wired alarm equipment connected to the telephone line, ensur e the installation of this product does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. US Number is located on the cabinet bottom REN number is located on the cabinet bottom Important Information Privacy of communications may not be ensured when using this phone. 3 cordless handset Warning: The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. to this unit 5 EQUIPMENT APPROVAL INFORMATION ............... 2 INTERFERENCE INFORMATION ........................... 3 LICENSING .................................................. 4 HEARING AID COMPATIBILITY ......................... 4 FCC RF R ADIATION EXPOSURE STATEMENT ...... 4 INFORMATION FOR DECT PRODUCT ................. 4 INTRODUCTION ............................................. 7 PARTS CHECKLIST ......................................... 7 TELEPHONE JACK REQUIREMENTS ..................... 7 INSTALLATION .............................................. 8 DIGITAL SECURITY SYSTEM ............................... 8 YOUR CORDLESS PHONE USES A DIGITAL SECURITY SYSTEM TO PROTECT AGAINST FALSE RINGING, UNAUTHORIZED ACCESS, AND CHARGES TO YOUR PHONE LINE. ............................................ 8 IMPORTANT INSTALLATION GUIDELINES .............. 8 HANDSET LAYOUT ........................................ 9 BASE LAYOUT ............................................ 10 INSTALLING THE PHONE ............................... 11 INSTALLING THE HANDSET BATTERY ................. 11 BASE STATION ...............................................12 PROGRAMMING THE PHONE ........................ 14 STANDBY SCREEN ..........................................14 PROGRAMMING FUNCTIONS ............................14 PHONE SETTING .............................................14 DATE/TIME ....................................................15 A UTO ANSWER (ONLY APPLICABLE FOR HANDSET) .. 15 AUTO ANSWER INTERCOM (APPLICABLE FOR BASE AND HANDSET) .........................................16 DIAL MODE (ONLY APPLICABLE FOR BASE) .......16 A REA CODE (ONLY APPLICABLE FOR BASE) .......16 REGISTRATION (ONLY APPLICABLE TO HANDSET) 16 REGISTER ......................................................17 REMOVE HANDSET .........................................17 DE-REGISTER (ONLY APPLICABLE FOR BASE) ....17 2 ... 17 ND CALL ALERT .........................................18 HANDSET NAME (ONLY APPLICABLE FOR HANDSET)...... 18 UPDATE HANDSET LIST (ONLY APPLICABLE FOR BASE) ......................................................18 DISPLAY SETTING ...........................................18 CONTRAST .....................................................19 BACKLIGHT (ONLY APPLICABLE FOR BASE) ........19 S OUND SETTING ............................................19 R V OICE MAIL .................................................20 ING VOLUME ...............................................19 K EY TONE .....................................................20 A NSWERING SYSTEM (ONLY APPLICABLE FOR BASE) ..... 20 ON/OFF STATUS ............................................21 OGA PLAYBACK............................................21 S OGA R ECORD...............................................21 ET OGA .....................................................21 S ET OFFICE TIME ...........................................21 SET WORK HOURS ........................................22 SET AFTER HOURS.........................................22 RING DELAY ..................................................23 M ESSAGE LENGTH .........................................23 CALL SCREENING ...........................................23 MESSAGE ALERT ...........................................23 REMOTE PASSWORD.......................................24 RESTORE SETTING ..........................................24 TELEPHONE OPERATION ............................... 24 MAKING CALLS WITH THE CORDLESS HANDSET 24 MAKING CALLS IN THE SPEAKERPHONE MODE …

Text truncated - open the document above for the full version.

INTERTEK TESTING SERVICES External Photos FCC ID: MZV2-5252D external photos - 1 of 4 Model: 25252D Job Number HK14041823 Job Number HK14041823 INTERTEK TESTING SERVICES External Photos FCC ID: MZV2-5252D external photos - 2 of 4 Model: 25252D INTERTEK TESTING SERVICES External Photos FCC ID: MZV2-5252D external photos - 3 of 4 Model: 25212D Job Number HK14041823 Job Number HK14041823 INTERTEK TESTING SERVICES External Photos FCC ID: MZV2-5252D external photos - 4 of 4 Model: 25212D

MODEL: 25212DFILE NAME: 25212D Packing REV: 01 APPROVED BY:MADE BY:Zhu, aihua 6/30/14 LINE 1+2LINE 2 POWER 7.5V DC THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. PRIVACY OF COMMUNICATIONS MAY NOT BE ENSURED WHEN USING THIS PHONE. SERIAL NO. LABEL SIZE: 52*13mm 有下划线表示符合ROHS标准 TF表示广州生产,TH表示惠州生产 SIZE: 54.5*21.5mm MODEL NO. LABEL, SIZE: 48*27.8mm 交货广州：4001331 交货惠州：4001332 25212D 4348TH S/NO.: 30000001 MODEL: 25212 US: 3F8W401B25252 FCC REN: 0.1B USOC Jack : RJ14C and RJ11C FCC ID: MZV2-5252 RCA is a trademark of RCA Trademark Management S.A., used under license. MADE IN CHINA FABRIQUE EN CHINE D D 4001332

INTERTEK TESTING SERVICES FCC ID: MZV2-5252D RF exposure - 1 of 1 For Maximum Permissible Exposure (MPE) evaluation of the base unit, the maximum power density at 20 cm from this mobile transmitter shall be less than the General Population / Uncontrolled MPE limit in OET Bulletin 65 and meet the requirement listed in KDB447498. The setup and equipment setting were made in accordance with ANSI C63.17. The antenna of EUT transmitter was replaced by a coaxial cable. The impendence matching of connection, cable loss and external RF attenuator are taken into account. The EUT was arranged to communicate via a fixed carrier frequency between its transmitter and a companion device. The transmission was configured in burst mode with pseudo-random data as typical as normal operation. EUT Companion Device Spectrum Analyze r Directional Coupler For the 1.9GHz Base Unit of tested model: 25252D, the measured powers among all the measured channels were within its production tolerance: +16 dBm (Minimum) and +23 dBm (Maximum).The antenna gain of 25252D is 0 dBi = 1.00 (num gain) and its maximum source-base d time-averaging duty factor is 20.8% (5/24 x100%). From these data and its operating configuration – Mobile device, the exposed power density at a distance (R) of 20cm from the center of radiation of the antenna can be calculated according to OET Bulletin 65 as follow: The Conducted Power = 23 dBm = 199.5 mW The Conducted Power source-based time-averaging output power = (199.5 * 0.208) mW = 41.5 mW The power density at 20cm = 41.5 *1.00/ 4R 2 = 0.0083 mW cm -2 In the frequency range of 1,500 - 100,000MHz, the MPE limit is 1.0 mWcm -2 for general population and uncontrolled exposure. As the measured power density at 20cm from the transmitter is lower than the MPE limit, the compliance to the MPE limit can be ensured by indicating the minimum 20cm separation between the transmitter's radiating structures and body of the user or near by persons. The following RF exposure statement is proposed to be included in the user manual: “ FCC RF Radiation Exposure Statement Caution: To maintain compliance with the FCC’s RF exposure guidelines, place the base unit at least 20cm from nearby persons.”

Issuing Laboratory: Intertek Testing Services Hong Kong Limited HKAS has accredited this laboratory (HOKLAS 005 – TEST) under HOKLAS for specific laboratory activities as listed in the HOKLAS directory of accredited laboratories. Report Number: 14041823HKG-001 Page 1 of 69 FCC ID: MZV2-5252D IC: 3921A-25252D Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com GENERAL INFORMATION Applicant Name: Telefield Ltd. Applicant Address: Flat D, 2/F.,Valiant Industrial Centre, 2-12 Au Pui Wan Street, Fo Tan, N.T., Hong Kong. FCC Specification Standard: FCC Part 15, October 1, 2012 Edition FCC ID: MZV2-5252D FCC Model(s): 1. 25252D, 25252X, 25252XX, 25252XXX, 25252XXX-X, TC25252X, TC25252XX, TC25252XXX, TC25252XXX-X 2. 25212D, 25212X, 25212XX, 25212XXX, 25212XXX-X, TC25212X, TC25212XX, TC25212XXX, TC25212XXX-X IC Specification Standard: RSS-213 Issue 2, December 2005 RSS-Gen Issue 3, December 2010 IC: 3921A-25252D IC Model(s): TC25212-D, TC25252-D Type of EUT: Unlicensed Personal Communications Service Devices Description of EUT: 1. 1.9GHz Digital Modulation two lines Cordless Phone with Caller-ID, Speakerphone and Digital Answering Machine - Base Unit 2. 1.9GHz Digital Modulation two lines Cordless Phone with Caller-ID and Speakerphone - Base Unit Serial Number: N/A Sample Receipt Date: April 30, 2014 Date of Test: Jun 25, 2014 to Jul 14,2014 Report Date: September 05, 2014 Environmental Conditions: Temperature: +10 to 40°C Humidity: 10 to 90% Issuing Laboratory: Intertek Testing Services Hong Kong Limited HKAS has accredited this laboratory (HOKLAS 005 – TEST) under HOKLAS for specific laboratory activities as listed in the HOKLAS directory of accredited laboratories. Report Number: 14041823HKG-001 Page 2 of 69 FCC ID: MZV2-5252D IC: 3921A-25252D Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com Table of Contents 1.0 Test Results Summary & Statement of Compliance.............................................. 5 1.1 Summary of Test Results ....................................................................................... 5 1.2 Statement of Compliance ....................................................................................... 7 2.0 General Description................................................................................................. 9 2.1 Product Description ................................................................................................. 9 2.2 Technical Description .............................................................................................. 9 2.3 Test Methodology.................................................................................................. 10 2.4 Test Facility........................................................................................................... 10 3.0 System Test Configuration.................................................................................... 12 3.1 Justification ........................................................................................................... 12 3.2 Conducted Emission Test Configuration ................................................................ 13 3.3 Conducted Monitoring and Operational Test Configuration .................................... 13 3.4 EUT Exercising Software....................................................................................... 13 3.5 Details of EUT and Description of Accessories...................................................... 14 3.6 Measurement Uncertainty ..................................................................................... 14 4.0 Measurement Results............................................................................................ 16 4.1 Antenna Requirement........................................................................................... 16 4.2 Digital Modulation Techniques............................................................................... 16 4.3 Emission Bandwidth.............................................................................................. 17 4.4 Directional Gain of the Antenna ............................................................................. 20 4.5 Peak Transmit Power ............................................................................................ 21 4.6 Power Spectral Density ......................................................................................... 24 4.7 Automatic Discontinuation of Transmission............................................................ 27 4.8 Unwanted Emission Inside the Sub-Band .............................................................. 28 4.9 Emissions Outside the Sub-Band .......................................................................... 32 4.9.1 Radiated Emissions Configuration Photographs ................................................. 33 4.9.2 Radiated Emissions Data ................................................................................... 33 4.9.3 Field Strength Calculation................................................................................... 40 4.9.4 Average Factor Calculation and Transmitter ON Time Measurements ................ 41 4.10 AC Power Line Conducted Emissions ................................................................. 42 4.10.1 AC Power Line Conducted Emissions Configuration Photographs .................... 43 4.10.2 AC Power Line Conducted Emissions Data ...................................................... 43 4.11 Frame Repetition Stability .................................................................................. 48 4.12 Frame Period and Jitter ...................................................................................... 49 4.13 Carrier …

Text truncated - open the document above for the full version.

declaredby is -61.4dBm MZV2-5252D

INTERTEK TESTING SERVICES The Worst Case Configuration Photographs - Mode: Transmission FCC ID: MZV2-5252D config photos (radiated emission - base unit) - 1 of 2 Radiated Emission – 25252D Bas e Unit Radiated Emission 25252D HK14041823 A B Front View Radiated Emission 25252D HK14041823 A B Rear View INTERTEK TESTING SERVICES The Worst Case Configuration Photographs - Mode: Transmission FCC ID: MZV2-5252D config photos (radiated emission - base unit) - 2 of 2 Radiated Emission – 25212D Bas e Unit Radiated Emission 25212D HK14041823 A B Front View Radiated Emission 25212D HK14041823 A B Rear View INTERTEK TESTING SERVICES The Worst Case Configuration Photographs FCC ID: MZV2-5252D config photos (conducted emission) - 1 of 4 Mode: Answering Machine Operation Conducted Emission – Model: 25252D Front View Right Side View INTERTEK TESTING SERVICES The Worst Case Configuration Photographs FCC ID: MZV2-5252D config photos (conducted emission) - 2 of 4 Mode: Answering Machine Operation Conducted Emission – Model: 25252D Left Side View INTERTEK TESTING SERVICES The Worst Case Configuration Photographs FCC ID: MZV2-5252D config photos (conducted emission) - 3 of 4 Mode: Charging and Ring Conducted Emission – Model: 25212D Front View Right Side View INTERTEK TESTING SERVICES The Worst Case Configuration Photographs FCC ID: MZV2-5252D config photos (conducted emission) - 4 of 4 Mode: Charging and Ring Conducted Emission – Model: 25212D Left Side View