MZV2-5216A2-line Corded Phone with Caller ID and Bluetooth

25216 User’s Guide ® Equipment Approval Information Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in com- pliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA. 1 Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment.You must, upon request, provide this information to your tele- phone company. The REN is useful in determining the number of devices you may connect to your telephone line and still have all of these devices ring when your telephone number is called. In most (but not all) areas, the sum of the RENs of all devices connected to one line should not exceed 5. To be certain of the number of devices you may connect to your line as determined by the REN, you should contact your local telephone company. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCCPart 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. Notes • This equipment may not be used on coin service provided by the telephone company. • Party lines are subject to state tariffs, and therefore, you may not be able to use your own tele phone equipment if you are on a party line. Check with your local telephone company. • Notice must be given to the telephone company upon permanent disconnection of your telephone from your line. • If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this product does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. US Number is located on the cabinet bottom REN number is located on the cabinet bottom 2 Rights of the Telephone Company Should your equipment cause trouble on your line that may harm the telephone network, the telephone com- pany shall, where practicable, notify you that temporary discontinuance of service may be required. Where prior notice is not practicable and the circumstances warrant such action, the telephone company may temporarily discontinue service immediately. In case of such temporary discontinuance, the telephone company must: (1) promptly notify you of such temporary discontinuance; (2) afford you the opportunity to correct the situation; and (3) inform you of your right to bring a complaint to the Commission pursuant to procedures set forth in Subpart E of Part 68, FCC Rules and Regulations. 2 The telephone company may make changes in its communications facilities, equipment, operations or proce- dures where such action is required in the operation of its business and not inconsistent with FCC Rules and Regulations. If these changes are expected to affect the use or performance of your telephone equipment, the telephone company must give you adequate notice, in writing, to allow you to maintain uninterrupted service. Interference Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception that can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures. • Reorient or relocate the receiving antenna (that is, the antenna for radio or television that is “receiving” the interference). • Reorient or relocate and increase the separation between the telecommunications equipment and receiving antenna • Connect the telecommunications equipment into an outlet on a circuit different from that to which the receiving antenna is connected. If these measures do not eliminate the interference, please consult your dealer or an experienced radio/televi- sion technician for additional suggestions. Also, the Federal Communications Commission has prepared a helpful booklet, “How to Identify and Resolve Radio/TV Interference Problems.” This booklet is available from the U.S. Government Printing Office, Washington, D.C., 20402. Please specify stock number 004-000-00345-4 when ordering copies. Notice: The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Licensing Licensed under US Patent 6,427,009. Hearing Aid Compatibility This telephone system meets FCC standards for Hearing Aid Compatibility. 3 Table of Contents 4 Equipment Approval Information 2 Interference Information 3 Licensing 3 Hearing Aid Compatibility 3 Introduction 5 Parts Checklist 5 Telephone Jack Requirements 6 Important Installation Guidelines 6 Phone Layout 7 Installing the Phone 8 Programming the Phone 11 - Standby Screen 11 - Programming Functions 11 - Voice Mail 11 - Call VM 11 - Settings 12 - Phone Settings 12 - Date/Time 12 - Set Date/Time 12 - Set Format 13 - Time Format 13 - Date Format 13 - Sound S…

Text truncated - open the document above for the full version.

Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com Authorization Letter September 10, 2009 To who may concern As an officer of Intertek Testing Services, I do hereby authorize Mr. Melvin Nip to sign documents for all of applications under the FCC Part 15 & RSS-210. Regards Ken Sit Manager

INTERTEK TESTING SERVICES External Photos FCC ID: MZV2-5216A IC: 3921A-25216A external photos - 1 of 3 INTERTEK TESTING SERVICES External Photos FCC ID: MZV2-5216A IC: 3921A-25216A external photos - 2 of 3 INTERTEK TESTING SERVICES External Photos FCC ID: MZV2-5216A IC: 3921A-25216A external photos - 3 of 3

CAUTION: UNPLUG ALL PHONE CORDS FROM WALL BEFORE CHANGING BATTERIES. TO REDUCE THE RISK OF FIRE, USE ONLY 'AAA' ALKALINE BATTERY. ATTENTION: DEBRANCHEZ TOUS LES CORDONS TELEPHONIQUES DE MUR AVANT DE CHANGER LES PILES. POUR REDUIRE RISQUE D'INCENDIE UTILISEZ SEULEMENT PILE ALCALINE 'AAA'. FABRIQUE EN CHINE MADE IN CHINA I. T. E. 8H33 E211520 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. PRIVACY OF COMMUNICATIONS MAY NOT BE ENSURED WHEN USING THIS PHONE. RCA is a trademark of RCA Trademark Management S.A., used under license. 17.5 mm 37.5 mm 57 mm 25216 2937TF S/NO.: 90000001 HAC US: 3F8 REN: FCC ID: MZV TE01B25214-A IC0.1 2-521A6 MODEL NO.: 25216 LABEL, MODEL NO.,SIZE: 38*17mmSERIAL NO. LABEL, GZ PRINT, SIZE: 60*14mm MODEL: 25216 FILE NAME: 25214/5/6 packing REV: 02 APPROVED BY:MADE BY: Yanjuan.liu 12/30/09

INTERTEK TESTING SERVICES Internal photos FCC ID: MZV2-5216A IC: 3921A-25216A internal photos - 1 of 8 EUT assembly EUT Main PCB comp side (View 1) INTERTEK TESTING SERVICES Internal photos FCC ID: MZV2-5216A IC: 3921A-25216A internal photos - 2 of 8 EUT Main PCB comp side (View 2) EUT Main PCB comp side (View 3) INTERTEK TESTING SERVICES Internal photos FCC ID: MZV2-5216A IC: 3921A-25216A internal photos - 3 of 8 EUT Main PCB comp side (View 4) EUT Main PCB comp side (View 5) INTERTEK TESTING SERVICES Internal photos FCC ID: MZV2-5216A IC: 3921A-25216A internal photos - 4 of 8 EUT Main PCB solder side EUT LCD Display and Keypad front side (View 1) INTERTEK TESTING SERVICES Internal photos FCC ID: MZV2-5216A IC: 3921A-25216A internal photos - 5 of 8 EUT LCD Display and Keypad front side (View 2) EUT LCD Display and Keypad rear side INTERTEK TESTING SERVICES Internal photos FCC ID: MZV2-5216A IC: 3921A-25216A internal photos - 6 of 8 EUT Speakerphone Button PCB Board front side EUT Speakerphone Button PCB Board rear side INTERTEK TESTING SERVICES Internal photos FCC ID: MZV2-5216A IC: 3921A-25216A internal photos - 7 of 8 EUT Headset Jack Board front side EUT Headset Jack Board rear side INTERTEK TESTING SERVICES Internal photos FCC ID: MZV2-5216A IC: 3921A-25216A internal photos - 8 of 8 EUT Bluetooth RF Module front side EUT Bluetooth RF Module rear side

INTERTEK TESTING SERVICES Radiated Emission on the Bandedge Plots FCC ID: MZV2-5216A IC: 3921A-25216A emission - 1 of 1 Base unit, Lowest channel Base unit, Highest channel

Report no.: HK10030121-1 Bluetooth Talk Mode AC Mains Ctrl No.: N/A 150 kHz30 MHz 1 PK CLRWR 2 AV CLRWR SGL TDS 6DB dBμV dBμV AC RBW 9 kHz MT 1 s PREAMP OFFAtt 10 dB AUTO 1 MHz10 MHz 0 10 20 30 40 50 60 70 80 90 100 CF15MAV CF15MQP Date: 9.MAR.2010 18:22:02 Report no.: HK10030121-1 Bluetooth Talk Mode AC Mains Ctrl No.: N/A EDIT PEAK LIST (Final Measurement Results) Trace1: CF15MQP Trace2: CF15MAV Trace3: --- TRACE FREQUENCY LEVEL dBμV DELTA LIMIT dB 1 Quasi Peak 10.5675 MHz 47.49 N gnd -12.50 2 CISPR Average10.5675 MHz 43.26 N gnd -6.73 Date: 9.MAR.2010 18:21:35

- The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. - This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com TEST REPORT Report Number: HK10030121-1 Application for Original Grant of 47 CFR Part 15 Certification Single New of RSS-210 Issue 7 Equipment Certification 2-line Corded Phone with Caller ID and Bluetooth FCC ID: MZV2-5216A IC: 3921A-25216A Prepared and Checked by: Approved by: Koo Wai Ip Nip Ming Fung, Melvin Engineer Supervisor March 17, 2010 INTERTEK TESTING SERVICES Test Report Number: HK10030121-1 Page 1 of 23 FCC ID: MZV2-5216A IC: 3921A-25216A GENERAL INFORMATION Applicant Name: Telefield Ltd. Applicant Address: Flat D, 2/F., Valiant Industrial Centre, 2-12 Au Pui Wan Street, Fo Tan, N.T., Hong Kong. FCC Specification Standard: FCC Part 15: 2008 FCC ID: MZV2-5216A FCC Model(s): 25216XXX-X IC Specification Standard: RSS-210 Issue 7, June 2007 RSS-Gen Issue 2, June 2007 RSS-102 Issue 3, June 2009 IC: 3921A-25216A IC Model(s): TC25216 Type of EUT: Transceiver Description of EUT: 2-line Corded Phone with Caller ID and Bluetooth Serial Number: N/A Sample Receipt Date: March 04, 2010 Date of Test: March 08-09, 2010 Report Date: March 17, 2010 Environmental Conditions: Temperature: +10 to 40°C Humidity: 10 to 90% INTERTEK TESTING SERVICES Test Report Number: HK10030121-1 Page 2 of 23 FCC ID: MZV2-5216A IC: 3921A-25216A Table of Contents 1.0 Summary of Test Results........................................................................................ 3 2.0 General Description................................................................................................. 5 2.1 Product Description ................................................................................................. 5 2.2 Test Methodology.................................................................................................... 6 2.3 Test Facility............................................................................................................. 6 3.0 System Test Configuration...................................................................................... 8 3.1 Justification ............................................................................................................. 8 3.2 EUT Exercising Software......................................................................................... 9 3.3 Details of EUT and Description of Accessories...................................................... 10 3.4 Measurement Uncertainty ..................................................................................... 10 3.5 Equipment Modification ......................................................................................... 10 4.0 Test Results............................................................................................................ 12 4.1 Field Strength Calculation...................................................................................... 12 4.2 Radiated Emissions............................................................................................... 13 4.2.1 Radiated Emission Configuration Photograph ..................................................... 13 4.2.2 Radiated Emission Data ..................................................................................... 13 4.2.3 Transmitter Duty Cycle Calculation ..................................................................... 14 4.3 Radiated Emissions from Receiver ........................................................................ 19 4.3.1 Radiated Emission Configuration Photograph ..................................................... 19 4.3.2 Radiated Emission Data ..................................................................................... 19 4.4 Radiated Emission on the Bandedge..................................................................... 21 4.5 AC Power Line Conducted Emission ..................................................................... 22 4.5.1 AC Power Line Conducted Emission Configuration Photograph.......................... 22 4.5.2 AC Power Line Conducted Emission Data .......................................................... 22 4.6 Radio Frequency Exposure Compliance................................................................ 22 5.0 Equipment List...................................................................................................... 23 Appendix – Exhibits for Application of Certification INTERTEK TESTING SERVICES Test Report Number: HK10030121-1 Page 3 of 23 FCC ID: MZV2-5216A IC: 3921A-25216A 1.0 Summary of Test Results Test Items FCC Part 15 Section RSS-210/ RSS-Gen # / RSS-310^ Section Results Details see section Antenna Requirement 15.203 7.1.4 # Pass 2.1 Radiated Emission Radiated Emission on the Bandedge 15.249(a), 209, & 109 15.249(d) A2.9(a) A2.9(b) Pass Pass 4.2 4.4 Radiated Emission in Restricted Bands 15.205 2.2…

Text truncated - open the document above for the full version.

INTERTEK TESTING SERVICES The Worst Case Configuration Photographs FCC ID: MZV2-5216A IC: 3921A-25216A config photos (radiated emission – base unit) - 1 of 1 Radiated Emission – Base Unit Front View Rear View INTERTEK TESTING SERVICES The Worst Case Configuration Photographs FCC ID: MZV2-5216A IC: 3921A-25216A config photos (conducted emission) - 1 of 2 Conducted Emission Front View Right Side View INTERTEK TESTING SERVICES The Worst Case Configuration Photographs FCC ID: MZV2-5216A IC: 3921A-25216A config photos (conducted emission) - 2 of 2 Conducted Emission Left Side View