N5A4246Digital Camera

les lignes directrices de la FCC/IC concernant les radiof- réquences lorsqu‘il est utilisé avec les accessoires Leica Camera AG fournis ou conçus pour ce produit et n‘ayant pas d‘élément métallique. L‘utilisation d‘autres accessoires peut faire perdre la conformité avec les lignes directrices d‘exposition de la FCC/IC. • INGESTION HAZARD: This product contains a button cell or coin battery. • DEATH or serious injury can occur if ingested. • A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours. •KEEP new and used batteries OUT OF REACH of CHILDREN •Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body. This product contains non-replaceable battery (type: MS614SE, nominal voltage: 3V). • Even used batteries may cause severe injury or death. • Call a local poison control center for treatment information. • Do not force discharge, recharge, disassemble, heat above 40°C or incinerate. Doing so may result in injury due to venting, leakage or explosion resulting in chemical burns. • R emove and immediately recycle or dispose of used batteries according to local regulations and keep away from children. Do NOT dispose of batteries in household trash or incinerate. • Non-rechargeable batteries are not to be recharged. A recyclable lithium ion/polymer battery powers this camera. Please call 1-800-8-BATTERY for information on how to recycle this battery. FOR SINGAPORE ONLY: Complies with IMDA Standards DA106734 FOR QATAR ONLY: WLAN 2.4GHz function is for «Indoor use only» FOR INDONESIA ONLY: WLAN functions is for „Indoor use only“ FOR MEXICO ONLY: La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause inter- ferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier inter- ferencia, incluyendo la que pueda causar su operación no deseada. FOR JAPAN ONLY: この装置は、クラスB情報技術装置です。この装置は、家庭環境で 使用 することを目的としていますが、この装置がラジオやテレビジョン受信 機に近接して使用されると、受信障害を引き起こすことがあります。取 扱説明書に従って正しい取り扱いをしてください。 VCCI-B 5180 – 5240 MHz: 親局:当該無線設備の送信は、屋内のみにおいて使用可能である旨 子局:当該無線設備の送信は、5.2GHz帯高出力データ通信システムの 基地局または陸上移動中継局と通信する場合を除き、屋内においての み可能である旨。 Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with an Apple product may affect wireless performance. Apple ® , Apple TV ® , Apple Watch ® , iPad ® , iPad Air ® , iPad Pro ® , iPhone ® , and Lightning ® are trademarks of Apple Inc., registered in the U.S. and other countries. tvOS ® is a trademark of Apple Inc. FOR TAIWAN ONLY: 取得審驗證明之低功率射頻器材，非經核准，公司、商號或使 用者均 不得擅自變更頻率、加大功率或變更原設計之特性及功能。低功率射 頻器材之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象 時，應 立即停用，並改善至無干擾時方得繼續使用。前述合法通信，指 依電信管理 法規定作業之無線電通信。低功率射頻器材須忍受合法 通信或工業、科學及 醫療用電波輻射性電機設備之干擾。 應避免影響附近雷達系統之操作。高增益指向性天線只得應用於固 定式點對點系統 台灣進口商: 香港商徠卡大中華相機有限公司台灣分公司 地址: 臺北市大安區青田街6巷3號 電話: 02-23912593 產品序號可以在機器頂蓋中間的相機熱靴座上找到（7位數 字元） FOR CHINA ONLY: 1. ■ 使用频率：2.4 - 2.4835 GHz ■ 等效全向辐射功率(EIRP)：天线增益＜10dBi时：≤100 mW 或≤20 dBm ■ 最大功率谱密度：天线增益＜10dBi时：≤10 dBm / MHz(EIRP) ■ 载频容限：20 ppm ■ 帯外发射功率(在2.4-2.4835GHz頻段以外): ≤-80 dBm / Hz (EIRP) ■杂散辐射等其他技术指标请参照2021/129 号文 2. 不 得擅自更改发射频率、加大发射功率(包括额外加装射频功率放大器)，不得擅 自外接天线或改用其它发射天线； 3. 使 用时不得对各种合法的无线电通信业务产生有害干扰；一旦发现有干扰现象 时，应立即停止使用，并采取措施消除干扰后方可继续使用； 4. 使 用微功率无线电设备，必须忍受各种无线电业务的干扰或工业、科学及医疗应 用设备的辐射干扰； 5. 不得在飞机和机场附近使用。 CMIIT ID: 2025J991ZZ4246 微功率设备声明 （一）符合“微功率短距离无线电发射设备目录和技术要求”的具体条款和使用场 景，采用的天线类型和性能，控制、调整及开关等使用方法； 具体条款： G类设备： （1）使用频率：5725-5850MHz （2）发射功率限值：25mW (e.i.r.p) （3）频率容限：100×10-6 使用场景: 数据通讯 天线类型： 嵌入式天线 天线性能： 天线增益 [email protected] 控制、调整及开关产品的使用方法： 由摄像头微处理器控制 （二）不得擅自改变使用场景或使用条件、扩大发射频率范围、加大发射功率（包 括额外加装射频功率放大器），不得擅自更改发射天线； （三）不得对其他合法的无线电台（站）产生有害干扰，也不得提出免受有害干扰 保护； （四）应当承受辐射射频能量的工业、科学及医疗（ISM）应用设备的干扰或其他合 法的无线电台（站）干扰； （五）如对其他合法的无线电台（站）产生有害干扰时，应立即停止使用，并采取措 施消除干扰后方可继续使用； （六）在航空器内和依据法律法规、国家有关规定、标准划设的射电天文台、 气象雷达站、卫星地球站（含测控、测距、接收、导航站） 等军民用无线电台（站）、机场等的电磁环境保护区域内使用微功率设备，应 当遵守电磁环境保护及相关行业主管部门的规定； （七）禁止在以机场跑道中心点为圆心、半径5000米的区域内使用各类模型遥 控器； （八）微功率设备使用时温度和电压的环境条件:见上述“工作条件”和“电源” 规格。 FOR THAILAND ONLY: FOR REPUBLIC OF KOREA ONLY: MSIP제품정보 기기의명칭 (모델명): 디지털 카메라 (4246) 전국서비스대표번호 :"02-2285-4421 (라이카 카메라 코리아 서비스센터)" 인증 번호: R-C-LcK-4246 신청자 이름: 라이카 카메라 코리아 (주) 기관에 의해 결정된 기기의 명칭: 특정소출력 무선기기(무선데이터통신 시스템용 무선기기) 제조자 :Leica Camera AG 제조국가 : 독일 인증받은자의상호 : 라이카 카메라 코리아 (주) 해당 무선설비는 전파혼신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없습니다. 기종별사용자 안내문 B급 기기 (가정용 방송통신기자재) 이 기기는 가정용(B급) 전자파적합기기로서 주로 가정에서 사용하 는 것을 목적으로 하며, 모든 지역에서 사용할 수 있습니다. 전지 및 자율안전확인정보 전지종류전지 모델명 BP-SCL7 정격7,4V 1800mAh 13,32Wh 신고필증번호XU101029-21013A 원산지China 공장명Fuji Electronics (Shenzhen) Co., Ltd. 제조자명Leica Camera AG 수입자명02-2285-4421 (라이카 카메라 코리아 서비스센터) 제조년월배터리 케이스에 표기된 제조 년월. 표기 방법은 다음과 같습니다. 연 - 월 전지본체 주의문구 • 화기에 가까이 두지 마십시오. • 분해하지 마십시오. • 전용충전기만 사용하십시오. • 섭씨60°C이상에서 보관하지 마십시오. 무선사양 항목내용 주파수범위 송신 WLAN 2 412 ~ 2 462 MHz/ 2 422 ~ 2 452MHz 5 745 ~ 5 825 MHz / 5 755 ~ 5 795 MHz Bluetooth 2 402 ~ 2 480 MHz 수신 WLAN 2 412 ~ 2 462 MHz/ 2 422 ~ 2 452 MHz 5 745 ~ 5 825 MHz / 5 755 ~ 5 795 MHz Bluetooth 2 402 ~ 2 480 MHz 변조방식 CCK(802.11b), OFDM(802.11g/a/n_HT20/ac_VHT20/n_HT40/ac_VHT40), GFSK(BDR, BLE), π/4-DQPSK (EDR_2 Mbps),8DPSK (EDR_3 Mbps) 전파형식 G1D (802.11b), D2D (802.11g/a/n_HT20/ac_VHT20/n_HT40/ac_VHT40), F1D(BDR, BLE),G1D(EDR_2 Mbps, EDR_3 Mbps) 출력 WLAN 2 400 ~ 2 483.5 MHz 10 mW/MHz : 802.11b/g/n(HT20) 5 mW/MHz : 802.11n(HT40) 5 725 ~ 5 850 MHz 10 mW/MHz : 802.11a/n(HT20)/ac(VHT20) 5 mW/MHz : 802.11n(HT40)/ac(VHT40) Bluetooth 0.1mW XOOOOO OOOOOO XOOOOO OOOOOO OOOOOO OOOOOO Mercury (Hg) Polybrominated diphenyl ethers (PBDE) Polybrominated biphenyls (PBB) 除非另外特别的标注,此标志为针对所涉及产品的环保使用期标志. 某些零部件会 有一个不同的环保使用期(例如,电池单元模块)贴在其产品上. 此环保使用期限只适用于产品是在产品手册中所规定的条件下工作. The Environmentally Friendly Use Period (EFUP) for all enclosed products and their parts are…

Text truncated - open the document above for the full version.

INFO PROFILES IN THE VIEWFINDER Up to 4 independent profiles can be used. The desired function can be selected and adjusted individually for each profile. During operation, the switch between Info Profiles is done via the center button. It allows quick switches between various views. The follow- ing profiles are predefined in the factory settings: Only Info Bars (Auxiliary displays Off ) Info Bar, Grids , Clipping , Level Gauge Info Bar, Clipping, Focus Peaking, Histogram SAFETY REMARKS GENERAL INFORMATION •Do not use your camera in the immediate vicinity of devices that generate powerful magnetic, electrostatic or electromagnetic fields (e.g. induction ovens, microwave ovens, television sets or computer screens, video game consoles, cell phones, broadcast- ing equipment). Their electromagnetic fields can interfere with image capturing. •Strong magnetic fields, e.g. from speakers or large electric motors can damage the stored data or disrupt shooting. •Switch off the camera, remove the battery briefly, replace it and switch the camera back on in case of a camera malfunction due to the effects of electromagnetic fields. •Do not use the camera in the immediate vicinity of radio transmitters or high-voltage power lines. Their electromagnetic fields may also interfere with image capturing. •Always store small parts e.g. the accessory shoe cover as follows: –out of the reach of children –in a safe location, where they will not get lost or stolen •State-of-the-art electronic components are sensitive to static discharge. You can easily pick up charges of several 10,000 volts by simply walking on synthetic floor coverings. A static discharge can occur when you touch the camera and especially if it is placed on a conductive surface. A static discharge on the camera housing poses no risk for the electronics. Despite built-in safety circuits, you should avoid direct contact with external camera contacts like those in the hot shoe. •Take care not to soil or scratch the sensor for lens detection in the bayonet. You must similarly prevent direct contact of the bayonet with grains of sand or similar particles, as these could cause irreparable damage. This component must only be cleaned with a dry cloth (in system cameras). •Use a cotton or linen cloth instead of a microfiber cloth from an optician's (synthetic) when cleaning the contacts. Make sure to discharge any electrostatic charge by deliberately touching a heating or water pipe (conductive, grounded material). Dirt deposits and oxidation on the contacts can be avoided by storing your camera in a dry location with the lens cap and the hot shoe/viewfinder cap (in system cameras) attached. •Only use accessories specified for this model to prevent faults, short circuits or electric shock. •Do not attempt to remove parts of the housing (covers) yourself. Repairs must be done at authorized service centers only. •Protect the camera against contact with insect sprays and other aggressive chemicals. Petroleum spirit, thinner and alcohol must not be used for cleaning. Some chemicals and liquids can damage the camera housing or the surface finish. •Rubber and plastics are known to expel aggressive chemicals and should therefore not be kept in contact with the camera for extended periods of time. •Prevent any sand or dust or water penetration into the camera, e.g. during snowfall or rain or on the beach. Be extra careful when changing the lens (in system cameras) and when inserting or removing the memory card and rechargeable battery. Sand and dust can damage the camera, the lens, the memory card and the battery. Moisture can cause malfunctions and irreparable damage to the camera and memory card. LENS •A camera lens can have the effect of a magnifying glass when exposed to direct frontal sunlight. The camera must therefore be protected against extended exposure to direct sunlight. •Attaching the lens cap and keeping the camera in the shade or ideally in its camera case, will help prevent damage to the interior of the camera. RECHARGEABLE BATTERY / CHARGER •Use of the rechargeable battery type (BP-SCL7) named and described in this manual is mandatory. •Improper use of the batteries or the use of unapproved battery types may result in an explosion! •Do not expose the rechargeable battery to sunlight, heat, humidity or moisture for prolonged periods of time. Likewise, the bat- teries must not be placed in a microwave oven or a high-pressure container as this would pose a fire or explosion hazard! • Do not under any circumstances charge or insert a damp or wet battery into the camera! • Keep the battery contacts clean and easily accessible. Although lithium-ion batteries are secured against short circuits, they should still be protected against contact with metal objects like paper clips or jewelry. A short-circuited battery can get very hot and cause severe burns. • When a battery is accidentally dropped, make sure to check the housing and the contacts immediately for any damage. A dam- aged battery can damage the camera. • The battery must be removed from the camera or charger and must be replaced immediately in case of a strange smell, discol- oration, deformation, overheating or leakage. Continued use of the battery may result in overheating, which can cause fire and/ or explosion! • Never throw batteries into a fire as they may explode. • Keep the battery away from sources of heat in case of leakage or if you smell burning. Leaked fluid can catch fire! • Use of the charger (BC-SCL7) named and described in this manual in combination with the stated switching adapter (ACA-SCL7) and the interchangeable power plugs is mandatory. • The use of other chargers not approved by Leica Camera AG can cause damage to the batteries – and in extreme cases – cause serious or life-threatening injuries. • Make sure that the power socket is freely accessible at all times. • Do not attempt to open the battery or the charger. Repairs must only be carried out by authorized works…

Text truncated - open the document above for the full version.

1Main switch Switching the camera ON/OFF 2Shutter button Tap: –Activating exposure metering and exposure control Press down fully: –Shutter release in standby mode: –The camera is reactivated 3Shutter-speed dial with stop positions – A: Automatic shutter speed control – 8s - 4000: Shutter speeds (inc. intermediate values) – B: Long-term exposure (1⁄ 16000 s–60 min, via menu control, in full increments or Bulb) –: Flash sync speed (1⁄ 180 s) aIndex 4Strap lugs 5 FN button** 6Self-timer LED 7Brightness sensor 8Lens release button 1 2 1 2 9Bayonet 106-bit encoding Sensor for lens detection 11FN Lever*** Towards the lens: Focus Peaking (factory setting) Away from the lens: Digital Zoom (factory setting) PART DESIGNATIONS 18 17 16 12 19 13 23 26 21 22 20 1 2 3 4 5 4 8 9 11 7 6 3a 10 27 28 15 25 14 24 29 12Viewfinder eyepiece 13Brightness sensor for LCD panel / eye sensor 14Accessory shoe 15Thumbwheel in the menu: –Menu navigation –Setting selected menu items/functions in shooting mode: –Use as function button** in review mode: –Enlarging/reducing viewed images Press: –Use as function button** 16 PLAY button –Switchover between shooting and review/playback mode –Return to full-screen display 17 FN button** 18 MENU button in the menu: –Accessing the menu (incl. Control Center) –Exiting the currently displayed (sub) menu 19LCD panel 20Status LED 21Directional pad in shooting mode: –Shifting the focus frame –Shifting the cropped section (Digital Zoom mode) in the menu: –Menu navigation –Setting selected menu items/functions in review mode: –Scrolling through the gallery 22Center button in the menu: –Applying menu settings in shooting/review mode: –Accessing the information displays 23Tripod thread A ¼, DIN 4503 (¼”) 24LED 25Battery release lever 26Memory card slot 27Battery compartment 28USB-C socket The rechargeable battery in the camera can be auto- matically charged when the camera is connected to a computer or another suitable power source via USB cable. Note •Charging will occur while the camera is in standby mode or switched off. The charging process will be interrupted when the camera is switched on and in use to protect the rechargeable battery. The charging will start automatically. 29Diopter wheel Setting range: -4 dpt to +2 dpt ** Press & release: Access to the assigned function. Press & hold: Modify assign- ment (drop-down list). *** Quick twist: Access to the assigned function. Twist & hold: Assignment change (drop-down list). DISPLAYS ON THE LCD PANEL 8 9 4567 10 22 16 12 2423 1718 1314 26 20 25 19 21 15 11 12327 1Storage location 2Remaining number of shots 3Remaining storage capacity 4Flash sync point 5Connection to Leica FOTOS 6Geotagging (via Leica FOTOS) 7Digital zoom 8Battery capacity 9Light balance 10Exposure compensation scale 11Exposure mode 12Shutter speed 13ISO Sensitivity 14Exposure compensation value 15E VF/LCD toggle 16Shooting mode ( Drive Mode ) 17Exposure metering method 18White balance 19User profile 20Lens information 21File format 22DNG Resolution 23JPG resolution 24Formatting a memory card 25Leica FOTOS 26Main menu 27Leica Content Credentials DISPLAYS IN THE VIEWFINDER 3234 33 363531 28 29 30 28Histogram 29Grid lines 30Level gauge 31Focus peaking 32ISO Sensitivity 33Light balance 34Exposure compensation scale 35Shutter speed 36Battery capacity LEICA FOTOS “Leica FOTOS” offers various additional functions and the op- tion to control the camera remotely via a smartphone or tablet. This will require an installation of the Leica FOTOS app on the mobile device.

© Antenova M2M 2020Commercial in Confidence Antennas for Wireless M2M Applications Leica Camera Dual-band Wi-Fi (CU20010-1) Author: Steve Bradburn Date: 14-JAN-2021 Commercial in Confidence© Antenova M2M 2020 Antennas for Wireless M2M Applications 2D Radiation Patterns Z X Y Commercial in Confidence© Antenova M2M 2020 Antennas for Wireless M2M Applications 2D Radiation Patterns Z X Y Commercial in Confidence© Antenova M2M 2020 Antennas for Wireless M2M Applications 3D Radiation Patterns Drag to rotate the pattern by using Adobe Reader. Click to Activate Z X Y Pattern@2450MHzPattern@5400MHz

Page 1 of 9 Annex C Photo documentation Appendix No.: 1-8801-24-01-13_TR1-A101-R01 Testing Laboratory cetecom advanced GmbH Untertuerkheimer Strasse 6 – 10 66117 Saarbruecken/Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: https://www.cetecomadvanced.com e-mail: [email protected] Appendix no.: 1-8801-24-01-13_TR1-A101-R01 Page 2 of 9 Photo 1: Measurement System DASY Photo 2: DUT - rear view Appendix no.: 1-8801-24-01-13_TR1-A101-R01 Page 3 of 9 Photo 3: DUT - top view Photo 4: DUT - front view Appendix no.: 1-8801-24-01-13_TR1-A101-R01 Page 4 of 9 Photo 5: DUT - bottom view Photo 6: DUT - bottom view (battery detached) Appendix no.: 1-8801-24-01-13_TR1-A101-R01 Page 5 of 9 Photo 7: Battery Photo 8: Accessories Appendix no.: 1-8801-24-01-13_TR1-A101-R01 Page 6 of 9 Photo 9: Test position front side without any distance Photo 10: Test position bottom side without any distance Appendix no.: 1-8801-24-01-13_TR1-A101-R01 Page 7 of 9 Photo 11: Test position left side without any distance Photo 12: Test position left side without any distance with hand grip Appendix no.: 1-8801-24-01-13_TR1-A101-R01 Page 8 of 9 Photo 13: Test position left side without any distance with SF40 Photo 14: Test position left side without any distance with thumb grip black Appendix no.: 1-8801-24-01-13_TR1-A101-R01 Page 9 of 9 Photo 15: Test position left side without any distance with thumb grip silver

Annex A104 - Photographs No. 1-8801-24-01-01_TR1-A104-R01 February 25, 2025 DescriptionTest setup photos This document is electronically signed and valid without handwritten signature. Public keys for verifcation of the electronic signatures can be requested at the testing laboratory. Andreas Curette Lab Manager Radio Labs authorized by cetecom advanced GmbH Untertuerkheimer Str. 6-10, 66117 Saarbruecken Document No. 1-8801-24-01-01_TR1-A104-R01 Page 1 of 6 Photo 1 Photo 2 cetecom advanced GmbH Untertuerkheimer Str. 6-10, 66117 Saarbruecken Document No. 1-8801-24-01-01_TR1-A104-R01 Page 2 of 6 Photo 3 Photo 4 cetecom advanced GmbH Untertuerkheimer Str. 6-10, 66117 Saarbruecken Document No. 1-8801-24-01-01_TR1-A104-R01 Page 3 of 6 Photo 5 Photo 6 cetecom advanced GmbH Untertuerkheimer Str. 6-10, 66117 Saarbruecken Document No. 1-8801-24-01-01_TR1-A104-R01 Page 4 of 6 Photo 7 Photo 8 cetecom advanced GmbH Untertuerkheimer Str. 6-10, 66117 Saarbruecken Document No. 1-8801-24-01-01_TR1-A104-R01 Page 5 of 6 Document History End of document ReleaseApplied changesRelease date R01initial releaseFebruary 25, 2025 cetecom advanced GmbH Untertuerkheimer Str. 6-10, 66117 Saarbruecken Document No. 1-8801-24-01-01_TR1-A104-R01 Page 6 of 6

Conducted test results No.1-8801-24-01-18_TR1-A201-R1 March 11, 2025 Test Standard(s)FCC 15.407 - NI ISED RSS247 - NI FCC 15.407, ISED RSS247 - NI This document is electronically signed and valid without handwritten signature. Public keys for verification of the electronic signatures can be requested at the testing laboratory. Authorized Andreas Kurzkurt Testing Manager Radio Labs cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-8801-24-01-18_TR1-A201-R1 Release 1 - Page 1 of 175 Table of Content EUT Information4 FCC 15.407 # Max output power and psd ~ WLAN5Gx a mode U-NII-35 ISED RSS247 # Max output power and psd ~ WLAN5Gx a mode U-NII-310 FCC 15.407, ISED RSS247 # Bandwidths 99PCT and 20dB ~ WLAN5Gx a mode U-NII-315 FCC 15.407, ISED RSS247 # Minimum emission bandwidth ~ WLAN5Gx a mode U-NII-319 FCC 15.407, ISED RSS247 # Emission mask (eirp) ~ WLAN5Gx a mode U-NII-321 FCC 15.407 # Max output power and psd ~ WLAN5Gx a mode U-NII-324 ISED RSS247 # Max output power and psd ~ WLAN5Gx a mode U-NII-329 FCC 15.407, ISED RSS247 # Bandwidths 99PCT and 20dB ~ WLAN5Gx a mode U-NII-334 FCC 15.407, ISED RSS247 # Minimum emission bandwidth ~ WLAN5Gx a mode U-NII-338 FCC 15.407, ISED RSS247 # Emission mask (eirp) ~ WLAN5Gx a mode U-NII-340 FCC 15.407 # Max output power and psd ~ WLAN5Gx a mode U-NII-343 ISED RSS247 # Max output power and psd ~ WLAN5Gx a mode U-NII-348 FCC 15.407, ISED RSS247 # Bandwidths 99PCT and 20dB ~ WLAN5Gx a mode U-NII-353 FCC 15.407, ISED RSS247 # Minimum emission bandwidth ~ WLAN5Gx a mode U-NII-357 FCC 15.407, ISED RSS247 # Emission mask (eirp) ~ WLAN5Gx a mode U-NII-359 FCC 15.407 # Max output power and psd ~ WLAN5Gx n-HT20 mode U-NII-362 ISED RSS247 # Max output power and psd ~ WLAN5Gx n-HT20 mode U-NII-367 FCC 15.407, ISED RSS247 # Bandwidths 99PCT and 20dB ~ WLAN5Gx n-HT20 mode U-NII-372 FCC 15.407, ISED RSS247 # Minimum emission bandwidth ~ WLAN5Gx n-HT20 mode U-NII-376 FCC 15.407, ISED RSS247 # Emission mask (eirp) ~ WLAN5Gx n-HT20 mode U-NII-378 FCC 15.407 # Max output power and psd ~ WLAN5Gx n-HT20 mode U-NII-381 ISED RSS247 # Max output power and psd ~ WLAN5Gx n-HT20 mode U-NII-386 FCC 15.407, ISED RSS247 # Bandwidths 99PCT and 20dB ~ WLAN5Gx n-HT20 mode U-NII-391 FCC 15.407, ISED RSS247 # Minimum emission bandwidth ~ WLAN5Gx n-HT20 mode U-NII-395 FCC 15.407, ISED RSS247 # Emission mask (eirp) ~ WLAN5Gx n-HT20 mode U-NII-397 FCC 15.407 # Max output power and psd ~ WLAN5Gx n-HT20 mode U-NII-3100 ISED RSS247 # Max output power and psd ~ WLAN5Gx n-HT20 mode U-NII-3105 FCC 15.407, ISED RSS247 # Bandwidths 99PCT and 20dB ~ WLAN5Gx n-HT20 mode U-NII-3110 FCC 15.407, ISED RSS247 # Minimum emission bandwidth ~ WLAN5Gx n-HT20 mode U-NII-3114 FCC 15.407, ISED RSS247 # Emission mask (eirp) ~ WLAN5Gx n-HT20 mode U-NII-3116 FCC 15.407 # Max output power and psd ~ WLAN5Gx n-HT40 mode U-NII-3119 ISED RSS247 # Max output power and psd ~ WLAN5Gx n-HT40 mode U-NII-3124 FCC 15.407, ISED RSS247 # Bandwidths 99PCT and 20dB ~ WLAN5Gx n-HT40 mode U-NII-3129 FCC 15.407, ISED RSS247 # Minimum emission bandwidth ~ WLAN5Gx n-HT40 mode U-NII-3133 FCC 15.407, ISED RSS247 # Emission mask (eirp) ~ WLAN5Gx n-HT40 mode U-NII-3135 FCC 15.407 # Max output power and psd ~ WLAN5Gx n-HT40 mode U-NII-3138 ISED RSS247 # Max output power and psd ~ WLAN5Gx n-HT40 mode U-NII-3143 FCC 15.407, ISED RSS247 # Bandwidths 99PCT and 20dB ~ WLAN5Gx n-HT40 mode U-NII-3148 FCC 15.407, ISED RSS247 # Minimum emission bandwidth ~ WLAN5Gx n-HT40 mode U-NII-3152 FCC 15.407, ISED RSS247 # Emission mask (eirp) ~ WLAN5Gx n-HT40 mode U-NII-3154 cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-8801-24-01-18_TR1-A201-R1 Release 1 - Page 2 of 175 FCC 15.407 # Max output power and psd ~ WLAN5Gx ac-VHT80 mode U-NII-3157 ISED RSS247 # Max output power and psd ~ WLAN5Gx ac-VHT80 mode U-NII-3162 FCC 15.407, ISED RSS247 # Bandwidths 99PCT and 20dB ~ WLAN5Gx ac-VHT80 mode U-NII-3167 FCC 15.407, ISED RSS247 # Minimum emission bandwidth ~ WLAN5Gx ac-VHT80 mode U-NII-3171 FCC 15.407, ISED RSS247 # Emission mask (eirp) ~ WLAN5Gx ac-VHT80 mode U-NII-3173 cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-8801-24-01-18_TR1-A201-R1 Release 1 - Page 3 of 175 EUT Information EUT DEFINITION ManufacturerLeica Model4246 ProductDigital camera Serial number6118785 Setup number1.0 Version SWNI Version FWNI Version HWNI Comment 1 Comment 2 Temperature [°C] min0 Temperature [°C] nom20 Temperature [°C] max40 Voltage [V] min6.2 Voltage [V] nom7.4 Voltage [V] max8.4 cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-8801-24-01-18_TR1-A201-R1 Release 1 - Page 4 of 175 FCC 15.407 # Max output power and psd ~ WLAN5Gx a mode U-NII-3 References TC start11.03.2025 09:45:55 Ambit temp (test rack) [°C] | humidity [rel%] not enabled | not enabled System version5.1.6.0 Standard | Version FCC 15.407 | NI MethodKDB789033 D02, F., E.2.e. DescriptionFCC 15.407 Max Output Power & PSD - WLAN5Gx a mode U-NII-3 Information EUT Common Settings WLAN5Gx Number of antenna ports1 User InteractionNo Device class U-NII-1 (FCC)Client Limit W52 japanStandard TPC supportedNo Vehicle use (ISED)No Equipment Signal analyzer,Rohde&Schwarz,FSV-40,1307.9002K40/101042,3.70 Switch matrix,cetecom advanced GmbH,USM,B002,1.0.0 Test Parameter Technology to testWLAN5Gx a mode EUT portEUT1 Temperaturenom Voltagenom Frequency low to testTrue | Freq [MHz] 5745 Frequency mid to testFalse | Freq [MHz] 5785 Frequency high to testFalse | Freq [MHz] 5825 Auto control enabled power supply | Climatic Box No | No Additional path loss [dB]0 Full path typeEUT_SA_GEN_SIG Full path nameEUT1.MP.SIG1/EUT1.SA/EUT1.GEN1/EUT1.GEN2/ Switch bits 00010001:00010001:00000000:00000001 cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-8801-24-01-18_TR1-A201-R1 Release 1 - Page 5 of 175 Test at TX 5745 MHz RESULT: Reference power cond. DESCRIPTIONLOWER LIMITUPPER LIMI…

Text truncated - open the document above for the full version.

TEST REPORT Test report no.: 1-8801-24-01-18_TR1-R01 Testing laboratory Applicant cetecom advanced GmbH Untertuerkheimer Strasse 6 – 10 66117 Saarbruecken / Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: https://cetecomadvanced.com e-mail: [email protected] Accredited Testing Laboratory: The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2018-03) by the Deutsche Akkreditierungsstelle GmbH (DAkkS). The accreditation is valid for the scope of testing procedures as stated in the accreditation certificate with the registration number: D-PL-12047-01-00. ISED Testing Laboratory Recognized Listing Number: DE0001 FCC designation number: DE0002 Leica Camera AG Am Leitz-Park 5 35578 Wetzlar / GERMANY Phone: +49(0)6441-2080-0 Contact: Peter Schober e-mail: [email protected] Manufacturer Leica Camera AG Am Leitz-Park 5 35578 Wetzlar / GERMANY Test standard/s FCC - Title 47 CFR Part 15 FCC - Title 47 of the Code of Federal Regulations; Chapter I; Part 15 - Radio frequency devices RSS - 247 Issue 3 Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and Licence-Exempt Local Area Network (LE-LAN) Devices For further applied test standards please refer to section 3 of this test report. Test Item Kind of test item: Digital Camera Model name: 4246 FCC ID: N5A4246 ISED certification number: 11245A-4246 Frequency: 5725 MHz to 5850 MHz Technology tested: WLAN Antenna: Integrated antenna Power supply: 7.4 V DC by battery Temperature range: 0°C to 40°C This test report is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test report authorized: Test performed: René Oelmann Andreas Kurzkurt Lab Manager Testing Manager Radio Labs Radio Labs Test report no.: 1-8801-24-01-18_TR1-R01 © cetecom advanced GmbH Page 2 of 61 1 Table of contents 1 Table of contents ....................................................................................................................................... 2 2 General information ................................................................................................................................... 4 2.1 Notes and disclaimer ...................................................................................................................... 4 2.2 Application details .......................................................................................................................... 4 2.3 Test laboratories sub-contracted .................................................................................................... 4 3 Test standard/s, references and accreditations ......................................................................................... 5 4 Reporting statements of conformity – decision rule .................................................................................. 6 5 Test environment ...................................................................................................................................... 7 6 Test item ................................................................................................................................................... 7 6.1 General description ......................................................................................................................... 7 6.2 Additional information .................................................................................................................... 7 7 Description of the test setup ...................................................................................................................... 8 7.1 Shielded semi anechoic chamber .................................................................................................... 9 7.2 Shielded fully anechoic chamber ................................................................................................... 11 7.3 Radiated measurements > 18 GHz ................................................................................................ 13 7.4 AC conducted ................................................................................................................................ 14 7.5 Conducted measurements with peak power meter & spectrum analyzer ....................................... 15 8 Sequence of testing ................................................................................................................................. 16 8.1 Sequence of testing radiated spurious 9 kHz to 30 MHz ............................................................... 16 8.2 Sequence of testing radiated spurious 30 MHz to 1 GHz ............................................................... 17 8.3 Sequence of testing radiated spurious 1 GHz to 18 GHz ............................................................... 18 8.4 Sequence of testing radiated spurious above 18 GHz.................................................................... 19 9 Measurement uncertainty ..................................................................................…

Text truncated - open the document above for the full version.