NCMOGI0322Quadband GSM/GPRS/EDGE and Triband UMTS/HSDPA/HSUPA USB Modem

AT&T USBConnect Quicksilver Getting Started Guide Z08_193_X_GSG_ATT_150X100_land_V2.indd 128-08-2008 13:19:40 2 This page is intentionally left blank Z08_193_X_GSG_ATT_150X100_land_V2.indd 228-08-2008 13:19:40 3 Welcome to AT&T Thank you for purchasing the AT&T USBConnect Quicksilver. Please use either this Getting Started Guide or our web tutorial available at att.com/WirelessTutorials for the most complete and up-to-date information available for setting up your device. Z08_193_X_GSG_ATT_150X100_land_V2.indd 328-08-2008 13:19:40 4 Table of Contents What’s in the box? 5 Getting started 6 Follow the steps below 7 1. Insert the SIM Card and connect the Quicksilver 7 2. Install the software 8 3. Connect to the AT&T Network 9 AT&T Communication Manager 10 Using AT&T Communication Manager 11 Using AT&T Communication Manager for Wi-Fi 13 To use AT&T Wi-Fi service 13 To connect to other Wi-Fi networks 14 Getting to know your device 15 Reassembling the Quicksilver 16 Frequently Asked Questions 17 Finding more information 20 Z08_193_X_GSG_ATT_150X100_land_V2.indd 428-08-2008 13:19:41 5 What’s in the box? Your package contains 2 items: • AT&T USBConnect Quicksilver • Getting Started Guide AT&T USBConnect Quicksilver Getting Started Guide Z08_193_X_GSG_ATT_150X100_land_V2.indd 528-08-2008 13:19:42 6 Getting started To get started, you need about 15 minutes and the following: AT&T USBConnect Quicksilver The Quicksilver sends and receives data between your laptop and the AT&T network. The Quicksilver includes the necessary software for your Windows laptop and will begin to auto-install when inserted for the first time. Mac users see page 8 before installing. SIM Card The SIM card stores the wireless number for your Quicksilver and your subscriber infor- mation enabling access to the AT&T network. Follow the easy steps for Windows Vista, XP and 2000 laptops on the next page. Warning: The Quicksilver device should be used with the LED indicator lights facing up or to either side for best perfor- mance and safety. If trying to use the device with the LED indicators facing down, the user should maintain a distance of at least ½ of an inch (12,7 mm) between the device and the user’s body. Follow the steps below 1. Insert the SIM card and connect the Quicksilver (about 2 minutes) • Open the Quicksilver by swiveling the cap to the right or left. • Peel away the pull tab that extends over the USB connector from the bottom of the device. • Use the pull tab to pull the dummy SIM from the slot. • Insert the SIM into the slot directly above the USB connector. • The notched portion of the SIM should go into the device first and be positioned towards the back end of the device. • Gently push the SIM card completely into the slot until it clicks into place and is fully inserted. • Inserted properly • Not inserted properly • Insert the Quicksilver into the laptop Z08_193_X_GSG_ATT_150X100_land_V2.indd 628-08-2008 13:19:43 7 Follow the steps below 1. Insert the SIM card and connect the Quicksilver (about 2 minutes) • Open the Quicksilver by swiveling the cap to the right or left. • Peel away the pull tab that extends over the USB connector from the bottom of the device. • Use the pull tab to pull the dummy SIM from the slot. • Insert the SIM into the slot directly above the USB connector. • The notched portion of the SIM should go into the device first and be positioned towards the back end of the device. • Gently push the SIM card completely into the slot until it clicks into place and is fully inserted. • Inserted properly • Not inserted properly • Insert the Quicksilver into the laptop ✕ Z08_193_X_GSG_ATT_150X100_land_V2.indd 728-08-2008 13:19:44 8 2. Install the software (about 10 minutes) Windows Vista, XP and 2000 AT&T Communication Manager (ACM) supports laptops with Microsoft Windows Vista, XP and 2000 and allows you to control how and when you connect to wireless networks. ACM will auto-install the first time you insert your Quicksilver into your laptop and then be available whenever needed. • Carefully push the Quicksilver into the USB port on your laptop. • After you insert the Quicksilver into a laptop for the first time, the ACM software will automatically start and guide you through the installation process. • Once installation is complete, restart your laptop when prompted. Mac OS When Quicksilver is inserted into your Mac power book, it will automatically install the GlobeTrotter Connect (GT Connect). Requires Mac OS Versions: 10.3.9, 10.4.11, 10.5 and above • Check the version of your Mac OS before you install GT Connect. • Carefully insert the Quicksilver into the USB port on your Mac book. • After you insert the Quicksilver into the Mac book for the first time, GT-Connect will automatically start and guide you through the installation process. Z08_193_X_GSG_ATT_150X100_land_V2.indd 828-08-2008 13:19:44 9 3. Connect to the AT&T Network (about 3 minutes) Windows Vista, XP and 2000 • Double click on the ACM icon on your desktop. • Wait while the Quicksilver initializes. • Click the Connect button when it turns orange. • Open your browser and access the Internet. • Once connected, the “Connect” button will change to “Disconnect” to allow you to end your session. Mac OS • Double click on the GlobeTrotter Connect icon on your desktop. • Wait while the Quicksilver initializes. • Click the Connect button when it is active. • Open your browser and access the Internet. • Once connected, the “Connect” button will change to “Disconnect” to allow you to end your session. Z08_193_X_GSG_ATT_150X100_land_V2.indd 928-08-2008 13:19:44 10 AT&T Communication Manager Communication Manager is a software application that lets you control your connections to either the AT&T mobile network nationwide using the Quicksilver or to available Wi-Fi networks including thousands of AT&T Wi-Fi hotspots using your laptop’s built in Wi-Fi capability. ACM offers tools to manage those connections, find the best connection available a…

Text truncated - open the document above for the full version.

iCON 322 FCC ID: NCMOGI0322 CE 0682 Certification Leaflet Federal communications commission notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15,22 and 24 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: > Reorient or relocate the receiving antenna. > Increase the separation between the equipment and receiver. > Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. > Consult the dealer or an experienced radio or television technician for help. Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Option could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC rules. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Exposure Information to Radio Frequency Energy This device complies to the SAR regulation as stated by the FCC. The measurements were made according to the Supplement C to OET Bulletin 65 of the Federal Communications Commission (FCC) Guidelines [OET 65] for evaluating compliance of mobile and portable devices with FCC limits for human exposure (general population) to radiofrequency emissions. The device was tested in all possible orientations while plugged into laptop computers. The highest SAR value for this modem when tested on top side with 12.7 mm (1/2 inch) distance was 1.45 W/kg. In positions other than top side, a separation distance of 5 mm (1/5 inch) is required. The highest SAR value in this case was 1.17 W/kg. This USB modem is approved for use in normal size laptop computers only (typically with 12" or larger display screens). To comply with FCC RF exposure requirements, this modem should not be used in configurations that cannot maintain at least below stated distances from users and bystanders: • 12.7 mm (1/2 inch) distance from the top side of the modem • 5 mm (1/5 inch) from all other sides The antenna swivel cap should be clicked into position during operation of the device. Users concerned with the risk of Radio Frequency exposure may wish to limit the duration of their calls and to position the modem as far away from the body as is practical. Top side Manufacturer's Disclaimer Statement The information in this document is subject to change without notice and does not represent a commitment on the part of the vendor. No warranty or representation, either expressed or implied, is made with respect to the quality, accuracy, or fitness for any particular purpose of this document. The manufacturer reserves the right to make changes to the content of this document and/or the products associated with it at any time without obligation to notify any person or organization of such changes. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use this product or documentation, even if advised of the possibility of such damages. For questions regarding your product or FCC declaration, contact: Option | Gaston Geenslaan 14 | 3001 Leuven | Belgium | www.option.com To identify this product we refer to the Part, Series, or Model number found on the product.

Test Report No.: G0M20806-1862-P-2224 Eurofins ETS Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 1 of 14 Annex A Pictures Test Report No.: G0M20806-1862-P-2224 Eurofins ETS Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 2 of 14 Test Report No.: G0M20806-1862-P-2224 Eurofins ETS Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 3 of 14 Test Report No.: G0M20806-1862-P-2224 Eurofins ETS Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 4 of 14

Rev:Sap Mat NR : Part Name: Page: Size:Scale: Drawn: Top Mat Nr: Date: Project: Gaston Geenslaan 14 - B3001 Leuven - Belgium 1.Overall dimensions: 17,1mm x 21,3mm / Radius Corners: 1.05 mm (top) / straight corners (bottom) 2.To be supplied in the format shown, on reels, copy position 2, internal core dia 40mm 3.Quantity per roll: 1000 or max o/d 4” 4.Each roll to be packed in bubble wrap and sealed in a polythene bag containing no other shedding material. Reels then to be packed in a box, each box to contain 4 reels. The outside of the box to be clearly labeled with the following information: - Option Part number - Quantity in box - Date produced 5.Liner to be 6.Label thickness: 50 27mm wide. Vertical gap between labels 4.275mm. μm max. 7.Label to be silver and suitable for thermal transfer printing. 8.Printing be resistant to rubbing and alcohol cleaning. 9.Raw material: Brady B-435 10.To be used with print ribbon: Brady R-600x Pre print DATE APPROVED ISSUEDDESCRIPTION REV ECN 1 1/1 A4 1:1 2002691 Eric Vandeputte Faema 1 First preliminary versionEV 19/03/08 19/03/2008 2002691 Thermal print suggestion Outline 21,30 mm 1 7 , 1 0 m m FCC ID:NCMOGI0322 06820682 Designed in E.U. By Option Made in China ICERA 3G 06820682 Designed in E.U. By Option Made in China ICERA 3G SKU:88888 Model: GI0322 IMEI:XXXXXXXXXXXXXXX SNR:XXXXXXXXXX MANF LBL Faema R1.0 ID Lable Location Info

ID Lable Location Info

Test Report No.: G0M20806-1862-P-2224 Eurofins ETS Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 5 of 14 Test Report No.: G0M20806-1862-P-2224 Eurofins ETS Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 6 of 14 Test Report No.: G0M20806-1862-P-2224 Eurofins ETS Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 7 of 14 Test Report No.: G0M20806-1862-P-2224 Eurofins ETS Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 8 of 14 Test Report No.: G0M20806-1862-P-2224 Eurofins ETS Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 9 of 14 Test Report No.: G0M20806-1862-P-2224 Eurofins ETS Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 10 of 14 Test Report No.: G0M20806-1862-P-2224 Eurofins ETS Product Service GmbH Storkower Str. 38c, D-15526 Reichenwalde, Germany Page 11 of 14

OPTIONWIRELESSGERMANYGMBH LABORATORYFORELECTROMAGNETICCOMPATIBILITY SÜDSTRASSE9 D47475KAMPLINTFORT Filename:2008081804icon322sarreport.doc page1of56             DosimetricAssessmentofthePortableDevice ICON322fromOptionWirelessGermany AccordingtotheFCCrequirements FCCID:NCMOGI0322          Product: ICON322 OptionWirelessTechnology           Date:August18,2008 OPTIONWIRELESSGERMANYGMBH LABORATORYFORELECTROMAGNETICCOMPATIBILITY SÜDSTRASSE9 D47475KAMPLINTFORT Filename:2008081804icon322sarreport.doc page2of56  Summary SummarySummary Summary   ThedeviceICON322isanewUSBStickwhichprovidestheoperatingbandsGSM850(GPRSClass12),GSM900 (GPRSClass12),GSM1800(GPRSClass12),GSM1900(GPRSClass12),WCDMAFDDI+II+V. Thedevicehasaswivelantennawithoneintendeduseposition.ThesystemconceptsusedareGPRS/EDGE GSM850,GPRS/EDGEGSM900,GPRS/EDGEPCN1800,GPRS/EDGEPCS1900,WCDMAFDDI,WCDMAFDDIIand WDMAFDDVstandards.TheUSBstickprovidesHSDPAandHSUPAinWCDMA.  Theintentionofthemeasurementsistheevaluationofradiofrequencyradiationexposureoftheportable deviceintheoperatingbandsGSM850(GPRSClass12),GSM1900(GPRSClass12),WCDMAFDDIIandWCDMA FDDV.  ThemeasurementswereperformedatIMST,KampLintfortandOptionEMCLab.,KampLintfort. TheiCON322usbstickwastestedinallorientations:no.2(antennaside),no.1(oppositeofantennaside), no.3andno.4(laterals)andno.5(tip). WhileGSM1900+WCDMAIIinno.2means½inchdistance(maximum)betweenportabledeviceandphantom,all otherbandsandorientationsweremeasuredwithmaximum5mmdistancebetweendeviceandphantom.  Allbandswerecheckedformaximumradiatedpower:GSM850wastestedwith3TXSlots(GPRS)and2TX Slots(EDGE),whileGSM1900testswereperformedwith3TXSlots(GPRS)and3or4TXSlots(EDGE).  ThemeasurementswereperformedwiththehostdevicesSONYPCG8113M,SONYVAIOPCG5G2Mand FUJITSUSIEMENSLIFEBOOKS6410.Duetolaptopdesignthemeasurementsinorientationpos.4weremade witha10cmusbcable.  Thedeviceisworkingindatatransfermodeonly(nospeechmode),sothetestsinGSM850andGSM1900 areperformedonlyinGPRSandEDGEmode.  ThemeasurementsweremadeaccordingtotheSupplementCOETBULLETIN65Edition9701.Duetothe facttheusbstickisdesignedforuseinlaptopsandnotebooks,itistobeclassifiedasaportabledevice (47CFR§2.1093).  Pursuantto47CFR§2.908theEUThasthestateofaproductionunit.  TheUSB TheUSBTheUSB TheUSB  stickwastestedinthefollowingconfigurations: stickwastestedinthefollowingconfigurations:stickwastestedinthefollowingconfigurations: stickwastestedinthefollowingconfigurations:    ModuleforuseinportableexposureconditionsthatdonotrequireSARevaluationforsimultaneous ModuleforuseinportableexposureconditionsthatdonotrequireSARevaluationforsimultaneousModuleforuseinportableexposureconditionsthatdonotrequireSARevaluationforsimultaneous ModuleforuseinportableexposureconditionsthatdonotrequireSARevaluationforsimultaneous transmission transmissiontransmission transmission    GSM850(GPRS GSM850(GPRSGSM850(GPRS GSM850(GPRSpowerclass4 powerclass4powerclass4 powerclass4), ),), ),(EDGEpowerclassE2) (EDGEpowerclassE2)(EDGEpowerclassE2) (EDGEpowerclassE2)    G GG GSM1900(GPRS SM1900(GPRSSM1900(GPRS SM1900(GPRSpowerclass1 powerclass1powerclass1 powerclass1), ),), ),(EDGEpowerclassE2) (EDGEpowerclassE2)(EDGEpowerclassE2) (EDGEpowerclassE2)    WCDMA WCDMAWCDMA WCDMAFDD FDDFDD FDDII IIII IIandWCDMA andWCDMAandWCDMA andWCDMAFDD FDDFDD FDD  V(powerclass3) V(powerclass3)V(powerclass3) V(powerclass3)    Bodyworn BodywornBodyworn Bodyworn    Againsttheflatphantom AgainsttheflatphantomAgainsttheflatphantom Againsttheflatphantom         Measurementsperformedby: Measurementsperformedby:Measurementsperformedby: Measurementsperformedby:          Measurementssupervisedby MeasurementssupervisedbyMeasurementssupervisedby Measurementssupervisedbyand andand and      IMST: IMST:IMST: IMST:AndrevandenBosch AndrevandenBoschAndrevandenBosch AndrevandenBosch,AlexanderRahn ,AlexanderRahn,AlexanderRahn ,AlexanderRahn      t tt testreportby: estreportby:estreportby: estreportby:   OPTION: OPTION:OPTION: OPTION:DirkWalkowiak,NevzatBaser,Dr. DirkWalkowiak,NevzatBaser,Dr.DirkWalkowiak,NevzatBaser,Dr. DirkWalkowiak,NevzatBaser,Dr.Sh.G. Sh.G.Sh.G. Sh.G.Pan PanPan Pan  WolfgangKoesters(TeamleaderEMC) WolfgangKoesters(TeamleaderEMC)WolfgangKoesters(TeamleaderEMC) WolfgangKoesters(TeamleaderEMC)    ....................................................................... Kösters OPTIONWIRELESSGERMANYGMBH LABORATORYFORELECTROMAGNETICCOMPATIBILITY SÜDSTRASSE9 D47475KAMPLINTFORT Filename:2008081804icon322sarreport.doc page3of56  TableOfC TableOfCTableOfC TableOfContents: ontents:ontents: ontents:    1 StatementOfCompliance.................................................................................................................................................5 2 SummaryOfTheSARTestResults...........................................................................................................................5 2.1 Orientation1 .....................................................................................................................................................................6 2.2 Orientation2 .......................…

Text truncated - open the document above for the full version.

OPTIONWIRELESSGERMANYGMBH LABORATORYFORELECTROMAGNETICCOMPATIBILITY SÜDSTRASSE9 D47475KAMPLINTFORT Filename:2008081802icon322sarreportplots.doc page1of107            SARDistributionPlots  Appendixtothereport:  DosimetricAssessmentofthePortableDevice ICON322fromOptionWirelessGermany AccordingtotheFCCrequirements FCCID:NCMOGI0322       Product: ICON322 OptionWirelessTechnology                      Date:August18,2008    OPTIONWIRELESSGERMANYGMBH LABORATORYFORELECTROMAGNETICCOMPATIBILITY SÜDSTRASSE9 D47475KAMPLINTFORT Filename:2008081802icon322sarreportplots.doc page2of107  TableofContents TableofContentsTableofContents TableofContents    SARDISTRIBUTIONPLOTS,ORIENTATION1.................................................................................................................03  SARDISTRIBUTIONPLOTS,ORIENTATION2................................................................................................................24  SARDISTRIBUTIONPLOTS,ORIENTATION3................................................................................................................45  SARDISTRIBUTIONPLOTS,ORIENTATION4................................................................................................................63  SARDISTRIBUTIONPLOTS,ORIENTATION5................................................................................................................81  VARIOUSSWIVELPOSITIONS............................................................................................................................................99   OPTIONWIRELESSGERMANYGMBH LABORATORYFORELECTROMAGNETICCOMPATIBILITY SÜDSTRASSE9 D47475KAMPLINTFORT Filename:2008081802icon322sarreportplots.doc page3of107 Orientatio OrientatioOrientatio Orientation nn n1 11 1  GSM850 GSM850GSM850 GSM850  GPRS GPRSGPRS GPRS– –– –c cc ch128 h128h128 h128   TestLaboratory:IMSTGmbH,DASYBlue(I);FileName: TestLaboratory:IMSTGmbH,DASYBlue(I);FileName:TestLaboratory:IMSTGmbH,DASYBlue(I);FileName: TestLaboratory:IMSTGmbH,DASYBlue(I);FileName:201bghl_1_3.da4 201bghl_1_3.da4201bghl_1_3.da4 201bghl_1_3.da4 DUT:Option; DUT:Option;DUT:Option; DUT:Option;   ProgramName:Body850 ProgramName:Body850ProgramName:Body850 ProgramName:Body850 CommunicationSystem:GPRS850;Frequency:824.2MHz;DutyCycle:1:2.6 Mediumparametersused:f=824.2MHz;σ=1.04mho/m;ε r =54;ρ=1000kg/m 3  Phantomsection:FlatSection DASY4Configuration: Probe:ET3DV6RSN1579;ConvF(6.24,6.24,6.24);Calibrated:23.01.2008 SensorSurface:4mm(MechanicalSurfaceDetection) Electronics:DAE3Sn335;Calibrated:08.02.2008 Phantom:SAMSugar1059;Type:Speag;Serial:1059 MeasurementSW:DASY4,V4.7Build71;PostprocessingSW:SEMCAD,V1.8Build184 BodyWorn/AreaScan(9x16x1): BodyWorn/AreaScan(9x16x1):BodyWorn/AreaScan(9x16x1): BodyWorn/AreaScan(9x16x1):Measurementgrid:dx=10mm,dy=10mm MaximumvalueofSAR(measured)=1.08mW/g BodyWorn/ZoomScan(7x7x7)/Cube0: BodyWorn/ZoomScan(7x7x7)/Cube0:BodyWorn/ZoomScan(7x7x7)/Cube0: BodyWorn/ZoomScan(7x7x7)/Cube0:Measurementgrid:dx=5mm,dy=5mm,dz=5mm ReferenceValue=15.8V/m;PowerDrift=0.039dB PeakSAR(extrapolated)=1.49W/kg SAR(1g)=1.04 SAR(1g)=1.04SAR(1g)=1.04 SAR(1g)=1.04mW/g;SAR(10g)=0.678mW/g mW/g;SAR(10g)=0.678mW/gmW/g;SAR(10g)=0.678mW/g mW/g;SAR(10g)=0.678mW/g MaximumvalueofSAR(measured)=1.14mW/g   SARdistributionforGPRS850(Class11),channel128,Position1(SonyVaioPCG5G2M,June23, 2008;AmbientTemperature:23.0°C;LiquidTemperature:21.6°C). Notebook region Antenna region OPTIONWIRELESSGERMANYGMBH LABORATORYFORELECTROMAGNETICCOMPATIBILITY SÜDSTRASSE9 D47475KAMPLINTFORT Filename:2008081802icon322sarreportplots.doc page4of107 Orientation OrientationOrientation Orientation1 11 1  GSM850 GSM850GSM850 GSM850  GPRS GPRSGPRS GPRS– –– –ch190 ch190ch190 ch190   TestLaboratory:IMSTGmbH,DASYBlue(I);FileName: TestLaboratory:IMSTGmbH,DASYBlue(I);FileName:TestLaboratory:IMSTGmbH,DASYBlue(I);FileName: TestLaboratory:IMSTGmbH,DASYBlue(I);FileName:201bghm_1_3.da4 201bghm_1_3.da4201bghm_1_3.da4 201bghm_1_3.da4 DUT:Option; DUT:Option;DUT:Option; DUT:Option;   ProgramName:Body850 ProgramName:Body850ProgramName:Body850 ProgramName:Body850 CommunicationSystem:GPRS850;Frequency:836.6MHz;DutyCycle:1:2.6 Mediumparametersused:f=836.6MHz;σ=1.05mho/m;ε r =53.9;ρ=1000kg/m 3  Phantomsection:FlatSection DASY4Configuration: Probe:ET3DV6RSN1579;ConvF(6.24,6.24,6.24);Calibrated:23.01.2008 SensorSurface:4mm(MechanicalSurfaceDetection) Electronics:DAE3Sn335;Calibrated:08.02.2008 Phantom:SAMSugar1059;Type:Speag;Serial:1059 MeasurementSW:DASY4,V4.7Build71;PostprocessingSW:SEMCAD,V1.8Build184 BodyWorn/AreaScan(9x16x1): BodyWorn/AreaScan(9x16x1):BodyWorn/AreaScan(9x16x1): BodyWorn/AreaScan(9x16x1):Measurementgrid:dx=10mm,dy=10mm MaximumvalueofSAR(measured)=1.32mW/g BodyWorn/ZoomScan BodyWorn/ZoomScanBodyWorn/ZoomScan BodyWorn/ZoomScan(7x7x7)/Cube0: (7x7x7)/Cube0:(7x7x7)/Cube0: (7x7x7)/Cube0:Measurementgrid:dx=5mm,dy=5mm,dz=5mm ReferenceValue=14.1V/m;PowerDrift=0.176dB PeakSAR(extrapolated)=1.58W/kg SAR(1g)=1.09mW/g;SAR(10g)=0.709mW/g SAR(1g)=1.09mW/g;SAR(10g)=0.709mW/gSAR(1g)=1.09mW/g;SAR(10g)=0.709mW/g SAR(1g)=1.09mW/g;SAR(10g)=0.709mW/g MaximumvalueofSAR(measured)=1.1…

Text truncated - open the document above for the full version.

OPTION WIRELESS GERMANY GMBH LABORATORY FOR ELECTROMAGNETIC COMPATIBILITY SÜDSTRASSE 9 D-47475 KAMP-LINTFORT Filename: 2008081803 icon322 sarreport antenna.doc page 1 of 2 ICON 322 ANTENNA Appendix to the report: Dosimetric Assessment of the Portable Device ICON 322 from Option Wireless Germany According to the FCC requirements FCC ID: NCMOGI0322 Product: ICON 322 Option Wireless Technology Date: Aug18, 2008 OPTION WIRELESS GERMANY GMBH LABORATORY FOR ELECTROMAGNETIC COMPATIBILITY SÜDSTRASSE 9 D-47475 KAMP-LINTFORT Filename: 2008081803 icon322 sarreport antenna.doc page 2 of 2 ICON322 ANTENNA The antenna is a monopole-type mounted on a plastic swivel part of USB stick. Contact is provided by a Pogo Pin to the PCB board’s antenna contact pad. Supplier of the antenna module is Galtronics. The photo of the antenna is shown in the following picture. tail connector (feeding point of the antenna, swivel axis) The maximum gain of the antenna in each operating band is Frequency(MHz) Gain (dB) 850 + 1.4 1900 + 2.9 WCDMA Band II + 4 WCDMA Band V + 2.3

OPTIONWIRELESSGERMANYGMBH LABORATORYFORELECTROMAGNETICCOMPATIBILITY SÜDSTRASSE9 D47475KAMPLINTFORT Filename:2008081805icon322sarreportsystemvalidation.doc page1of31            SYSTEMVALIDATION  Appendixtothereport:  DosimetricAssessmentofthePortableDevice ICON322fromOptionWirelessGermany AccordingtotheFCCrequirements FCCID:NCMOGI0322       Product: ICON322 OptionWirelessTechnology          Date:Aug18,2008    OPTIONWIRELESSGERMANYGMBH LABORATORYFORELECTROMAGNETICCOMPATIBILITY SÜDSTRASSE9 D47475KAMPLINTFORT Filename:2008081805icon322sarreportsystemvalidation.doc page2of31 835MHz TestLaboratory:EMCDepartmentKampLintfort 1.1.1 1.1.11.1.1 1.1.1 validation8351723_240608 validation8351723_240608validation8351723_240608 validation8351723_240608   DUT:Dipole835MHz;Type:D835V2;Serial:D835V2 DUT:Dipole835MHz;Type:D835V2;Serial:D835V2DUT:Dipole835MHz;Type:D835V2;Serial:D835V2 DUT:Dipole835MHz;Type:D835V2;Serial:D835V2  SN:470 SN:470SN:470 SN:470 CommunicationSystem:CW;Frequency:835MHz;DutyCycle:1:1 Mediumparametersused:σ=0.99mho/m,ε r =53.81;ρ=1000kg/m 3  Phantomsection:FlatSection DASY4Configuration: • Probe:ET3DV6SN1723;ConvF(5.94,5.94,5.94);Calibrated:11/20/2007 • SensorSurface:4mm(MechanicalSurfaceDetection) • Electronics:DAE4Sn523;Calibrated:11/21/2007 • Phantom:SAMRIGHT;Type:SAM4.0;Serial:1241 • MeasurementSW:DASY4,V4.5Build19;PostprocessingSW:SEMCAD,V1.8Build146  d=15mm,Pin=250mW/AreaScan(5x13x1): d=15mm,Pin=250mW/AreaScan(5x13x1):d=15mm,Pin=250mW/AreaScan(5x13x1): d=15mm,Pin=250mW/AreaScan(5x13x1):Measurementgrid:dx=15mm,dy=15mm MaximumvalueofSAR(measured)=2.78mW/g  d=15mm,Pin=250mW/ZoomScan(7x7x7)/Cube0: d=15mm,Pin=250mW/ZoomScan(7x7x7)/Cube0:d=15mm,Pin=250mW/ZoomScan(7x7x7)/Cube0: d=15mm,Pin=250mW/ZoomScan(7x7x7)/Cube0:Measurementgrid:dx=7.5mm,dy=7.5mm, dz=5mm ReferenceValue=56.4V/m;PowerDrift=0.013dB PeakSAR(extrapolated)=3.39W/kg SAR(1g)=2.51mW/g;SAR(10g)=1.67mW/g SAR(1g)=2.51mW/g;SAR(10g)=1.67mW/gSAR(1g)=2.51mW/g;SAR(10g)=1.67mW/g SAR(1g)=2.51mW/g;SAR(10g)=1.67mW/g MaximumvalueofSAR(measured)=2.73mW/g OPTIONWIRELESSGERMANYGMBH LABORATORYFORELECTROMAGNETICCOMPATIBILITY SÜDSTRASSE9 D47475KAMPLINTFORT Filename:2008081805icon322sarreportsystemvalidation.doc page3of31   OPTIONWIRELESSGERMANYGMBH LABORATORYFORELECTROMAGNETICCOMPATIBILITY SÜDSTRASSE9 D47475KAMPLINTFORT Filename:2008081805icon322sarreportsystemvalidation.doc page4of31  TestLaboratory:EMCDepartmentKampLintfort 1.1.2 1.1.21.1.2 1.1.2 validation8351723_body_080728 validation8351723_body_080728validation8351723_body_080728 validation8351723_body_080728   DUT:Dipole835MHz;Type:D835V2;Serial:D835V2 DUT:Dipole835MHz;Type:D835V2;Serial:D835V2DUT:Dipole835MHz;Type:D835V2;Serial:D835V2 DUT:Dipole835MHz;Type:D835V2;Serial:D835V2  SN:470 SN:470SN:470 SN:470 CommunicationSystem:CW;Frequency:835MHz;DutyCycle:1:1 Mediumparametersused:σ=0.99mho/m,ε r =53.81;ρ=1000kg/m 3  Phantomsection:FlatSection DASY4Configuration: • Probe:ET3DV6SN1723;ConvF(5.94,5.94,5.94);Calibrated:11/20/2007 • SensorSurface:4mm(MechanicalSurfaceDetection) • Electronics:DAE4Sn523;Calibrated:11/21/2007 • Phantom:SAMRIGHT;Type:SAM4.0;Serial:1241 • MeasurementSW:DASY4,V4.5Build19;PostprocessingSW:SEMCAD,V1.8Build146  d=15mm,Pin=250mW/AreaScan(5x13x1): d=15mm,Pin=250mW/AreaScan(5x13x1):d=15mm,Pin=250mW/AreaScan(5x13x1): d=15mm,Pin=250mW/AreaScan(5x13x1):Measurementgrid:dx=15mm,dy=15…

Text truncated - open the document above for the full version.