NOO-F0064-111InterReach� Fusion Remote Access Unit

D-620616-0-20 Rev A InterReach ® Fusion ® Wideband Installation, Operation, and Reference Manual D-620616-0-20Help Hot Line (U.S. only): 1-800-530-9960 Rev ACONFIDENTIAL D-620616-0-20Help Hot Line (U.S. only): 1-800-530-9960 Rev ACONFIDENTIAL This manual is produced for use by LGC Wireless personnel, licensees, and customers. The information contained herein is the property of LGC Wireless. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of LGC Wireless. LGC Wireless reserves the right to make changes, without notice, to the specifications and materials contained herein, and shall not be responsible for any damages caused by reliance on the material as presented, including, but not limited to, typographical and listing errors. Your comments are welcome – they help us improve our products and documentation. Please address your comments to LGC Wireless, Inc. corporate headquarters in San Jose, California: Address2540 Junction Avenue San Jose, California 95134-1902 USA Attn: Marketing Dept. Phone1-408-952-2400 Fax1-408-952-2410 Help Hot Line 1-800-530-9960 (U.S. only) +1-408-952-2400 (International) Web Addresshttp://www.lgcwireless.com [email protected] [email protected] Copyright © 2008 by LGC Wireless, Inc. Printed in USA. All rights reserved. Trademarks All trademarks identified by ™ or ® are trademarks or registered trademarks of LGC Wireless, Inc. All other trademarks belong to their respective owners. InterReach Fusion Wideband Installation, Operation, and Reference Manual CONFIDENTIALD-620616-0-20 Rev A Limited Warranty Seller warrants articles of its manufacture against defective materials or workmanship for a period of one year from the date of shipment to Purchaser, except as provided in any warranty applicable to Purchaser on or in the package containing the Goods (which warranty takes precedence over the following warranty). The liability of Seller under the foregoing warranty is limited, at Seller’s option, solely to repair or replacement with equivalent Goods, or an appropriate adjustment not to exceed the sales price to Purchaser, provided that (a) Seller is notified in writing by Purchaser, within the one year warranty period, promptly upon discovery of defects, with a detailed description of such defects, (b) Purchaser has obtained a Return Materials Authorization (RMA) from Seller, which RMA Seller agrees to provide Purchaser promptly upon request, (c) the defective Goods are returned to Seller, transportation and other applicable charges prepaid by the Purchaser, and (d) Seller’s examination of such Goods discloses to its reasonable satisfaction that defects were not caused by negligence, misuse, improper installation, improper maintenance, accident or unauthorized repair or alteration or any other cause outside the scope of Purchaser’s warranty made hereunder. Notwithstanding the foregoing, Seller shall have the option to repair any defective Goods at Purchaser’s facility. The original warranty period for any Goods that have been repaired or replaced by seller will not thereby be extended. In addition, all sales will be subject to standard terms and conditions on the sales contract. Licensed Operators LGC Wireless’ equipment is designed to operate in the licensed frequency bands of mobile, cellular, and PCS operators. In the USA, the EU, and most countries this equipment may only be used by the licensee, his authorized agents or those with written authorization to do so. Similarly, unauthorized use is illegal, and subjects the owner to the corresponding legal sanctions of the national jurisdiction involved. Ownership of LGC Wireless equipment carries no automatic right of use. InterReach Fusion Wideband Installation, Operation, and Reference Manual1 D-620616-0-20 Rev ACONFIDENTIAL Table of Contents SECTION 1General Information . . . . . . . . . . . . . . . . . . . . . . 1-1 1.1 Firmware Release. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 1.2 Purpose and Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 1.3 Conventions in this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 1.4 Standards Conformance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 1.5 Related Publications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 SECTION 2 InterReach Fusion Wideband System Description . . . . . . . . . . . . . . . . . . . . . . 2-1 2.1 System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 2.2 System Hardware Description . . . . . . . . . . . . . . . . . . . . . . . . 2-3 2.3 System OA&M Capabilities Overview . . . . . . . . . . . . . . . . . 2-5 2.3.1 System Monitoring and Reporting . . . . . . . . . . . . . . . . . . . . . 2-6 2.3.2 Using Alarm Contacts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6 2.4 System Connectivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7 2.5 System Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8 2.6 System Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9 2.6.1 RF End-to-End Performance. . . . . . . . . . . . . . . . . . . . . . . . . 2-10 SECTION 3Fusion Wideband Main Hub . . . . . . . . . . . . . . . . 3-1 3.1 Fusion Wideband Main Hub Overview . . . . . . . . . . . . . . . . . 3-1 3.2 Fusion Wideband Main Hub Front Panel. . . . . . . . . . . . . . . . 3-4 3.2.1 Optical Fiber Uplink/Downlink Ports. . . . . . . . . . . . . . . . . . . 3-5 3.2.2 Communications RS-232 Serial Connector . . . . . . . . . . . . . . 3-5 3.2.3 Main Hub LED Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5 3.3 Fusion Wideband Main Hub Rear Panel . . . . . . . . . . . . . . . . 3-8 3.3.1 Fusion Wideband Main Hub Rear Panel Connectors . . . . . . . 3-8 3.3.1.1 9-pin D-sub Connector . . . . .…

Text truncated - open the document above for the full version.

Document Title: WiMAX Gen 1 Spécification REV Page Rev 3 1 of 4 Filename: WiMAX Gen1 System Specification Rev3.doc When printed or copied, document is for REFERENCE ONLY as of, 03/07/08 LGC Wireless Confidential 1 Purpose Purpose of this document is to list WiMAX Gen1 System Specifications. 2 Scope This specification establishes the performance requirements for the WiMAX distributed antenna system (DAS). 3 Responsibility LGC Wireless is responsible for maintaining this document. 4 System Level Specification 4.1 Operating Frequencies WiMAX Gen1 will have two frequency bands. This will allow customer to run Band 1 as main band and Band 2 as MIMO. Second, it allows customer to run two independent bands for example one could be sector 1 and other could be sector 2 with same or different frequency. 4.1.1 WiMAX Frequency Band 1: WiMAX Band 1 has four sub bands that cover Complete WiMAX band from 2496-2690MHz in 60MHz sub bands. These tables might change based on marketing requirements. Downlink Uplink Band RF Passband (MHz) RF Passband (MHz) WiMAX B1 2496 - 2556 2496 - 2556 WiMAX B2 2546 - 2606 2546 - 2606 WiMAX B3 2596 - 2656 2596 - 2656 WiMAX B4 2630 - 2690 2630 - 2690 4.1.2 WiMAX Frequency Band 2: WiMAX Band 2 has four sub bands that cover Complete WiMAX band from 2496-2690MHz in 60MHz sub bands. Downlink Uplink Band RF Passband (MHz) RF Passband (MHz) WiMAX B1 2496 - 2556 2496 - 2556 WiMAX B2 2546 - 2606 2546 - 2606 Document Title: WiMAX Gen 1 Spécification REV Page Rev 3 2 of 4 Filename: WiMAX Gen1 System Specification Rev3.doc When printed or copied, document is for REFERENCE ONLY as of, 03/07/08 LGC Wireless Confidential WiMAX B3 2596 - 2656 2596 - 2656 WiMAX B4 2630 - 2690 2630 - 2690 4.2 RF Specifications RF End-to-End Performance Downlink Uplink Parameter Units Min Typ Max Min Typ Max Average System Gain dB 15 15 System Gain Ripple dB 3.0 4.5 3.0 4.5 Output IP3 (SMF) dBm 33 38 Input IP3 (SMF) dBm -10 -5 Output P1dB dBm 25 28 NF 1-1 dB 11 16 NF 1-8 dB 17 21 NF 1- 4 – 32 dB 23 28 Output Noise Floor (SMF) dBm/Hz -100 UL Limiter Level (referenced to input) dBm -33 DL Limiter Level (referenced to output) for EPCS dBm 27 Out-of-Band Spurious Output Levels (Non LO) dBm -13 -13 Passband Spurious Output Levels (Non LO) dBm -36 -85 -75 4.2.1 System Phase Noise Performance Phase Noise Performance Above 1GHz Offset (kHz) Typ (dBc/Hz) Max (dBc/Hz) 0.1 60 57 1 73 68.5 10 83 78 30 96.5 92 100 108 104 5 Environmental Specifications: Parameter Main Hub and Expansion Hub Remote Access Unit Operating Temperature 0° to +45°C (+32° to +113°F) –25° to +45°C (–13° to +113°F) Non-operating Temperature –20° to +85°C (–4° to +185°F) –25° to +85°C (–13° to +185°F) Document Title: WiMAX Gen 1 Spécification REV Page Rev 3 3 of 4 Filename: WiMAX Gen1 System Specification Rev3.doc When printed or copied, document is for REFERENCE ONLY as of, 03/07/08 LGC Wireless Confidential Operating Humidity; non-condensing 5% to 95% 5% to 95% 6 Cabling Specifications: Parameter Specifications Optical Fiber These specifications assume that the fiber optic cable, single-mode, is Corning with SC/APC connectors. Optical Power Budget Uplink and Downlink Maximum: 3 dB Optical power budget between Main Hub and Expansion Hub CATV The specifications in this document assume that CATV RG-59 cable is CommScope 2065V, CATV RG-6 cable is CommScope 2279V, and CATV RG-11 cable in CommScope 2293K or equivalent, with 75 ohm F connectors. CATV Lengths Minimum: 135 meters Maximum with RG-59 Maximum: 140 meters Maximum with RG-6 Maximum: 235 meters Maximum with RG-11 7 Physical Specifications: Parameter Main Hub Expansion Hub Remote Access Unit IF/RF Connectors 4 N, female (50 ohms), 1 Downlink / Uplink pair per MIMO Channel 8 F, female (CATV -75 ohms) 1 F, female (CATV - 75 ohms) 1 N, female (antenna - 50 ohms) External Alarm Connector (contact closure) 1 9-pin D-sub, female — — ADMIN/LAN Interface Connector 1 RJ-45, female 1 9-pin D- sub, male for optional modem 1 RJ-45, female 1 9-pin D- sub, male — Fiber Connectors 4 Pair, SC/APC 1 Pair, SC/APC — AC Power (Volts) Rating: 100-240V AC, 1A, 50–60 Hz Rating: 100-240V AC, 6A, 50–60 Hz 54V DC (from the E Hub) Operating Range: 90–132V AC/170–250V AC auto- ranging Operating Range: 90–132V AC/170–250V AC auto- ranging DC Power (Volts) Rating/Operating Range: 38-64V DC, 2.5A Rating/Operating Range: 38-64V DC, 14A — Power Consumption (W) 30 4 RAUs: 240 typical, 310 max. 8 RAUs: 400 typical, 530 max. — Enclosure Dimensions (height ×width ×depth) 89 mm × 438 mm × 381 mm (3.5 in. × 17.25 in. × 15 in.) 2U 89 mm × 438 mm × 381 mm (3.5 in. × 17.25 in. × 15 in.) 2U 54 mm × 286 mm × 281 mm (2.13 in. × 11.25 in. × 11.13 in.) Weight < 5.5 kg (< 12 lb) < 6.6 kg (< 14.5 lb) < 2.1 kg (< 4.6 lb) Document Title: WiMAX Gen 1 Spécification REV Page Rev 3 4 of 4 Filename: WiMAX Gen1 System Specification Rev3.doc When printed or copied, document is for REFERENCE ONLY as of, 03/07/08 LGC Wireless Confidential Note Section 8 and 9 are for internal use only. They are for ATE configuration. 8 Main Hub TDD Requirements: TDD Duplex port or Simplex ports will be configured in manufacturing based on customer requirements. 8.1 MH TDD threshold configuration: Main Hub threshold is configured at ATE. Each band and each Sub Band have different threshold and memory location. MH will switch to Downlink at input power of -10dBm. This is configured at ATE with 0dB System gain. After setting MH gain and calibration threshold, ATE will inject -10dBm signal into MH and measure detector threshold through A/D and program it into assigned memory location. ATE will measure and program this value into each sub band it tests. These steps are repeated for both bands. 9 RAU TDD Threshold Requirements: 9.1 RAU Threshold Configuration RAU Threshold is set after RAU configuration is done. Each band have different threshold, and each sub band has different threshold. Band 1 setup: RAU Output power is set to -10dBm and Band 1 Downlink Burst Detector outp…

Text truncated - open the document above for the full version.

Mailing Address: P.O. Box 1101, Minneapolis, Minnesota 55440-1101 World Headquarters: Minneapolis, Minnesota USA +1.952.938.8080 www.adc.com March 26, 2008 Attn: Application Examiner, Reviewing Engineer Re: Request of Confidentiality Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying as outlined below: Schematics, Technical Description or Theory of Operation, Bill of Materials (BOM’s), and Block Diagrams The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this Application. Sincerely, Mark Miska Compliance Engineer Tele: 952 403-8340 Fax: 952 403-8858 Email: [email protected]

InterReach® Fusion Remote Access Unit Front View InterReach® Fusion Remote Access Unit Rear View InterReach® Fusion Remote Access Unit Left View InterReach® Fusion Remote Access Unit Right View InterReach® Fusion Remote Access Unit Top View InterReach® Fusion Remote Access Unit Bottom View InterReach® Fusion Remote Access Unit Open Top View

INFORMATION ON THIS DOCUMENT IS PROPRIETARY TO ADC AND SHALL NOT BE USED, COPIED, REPRODUCED OR DISCLOSED IN WHOLE OR IN PART WITHOUT WRITTEN CONSENT OF ADC TITLE InterReach® Fusion Remote Access Unit FCC Identification Label TOLERANCE UNLESS .XX NA OTHERWISE SPECIFIED .XX NA DRAWING NUMBER None A REV DO NOT SCALE DRAWING ENGR. Mark F. Miska SIZE A SHEET 1 OF 1 REV ECO DWN DATE A MFM 3-26-2008 XXXX-XXXXXXXX FCC ID: NOO-F0064-111 2 1.500 REF R.075 (4) DIE CUT LABEL .750 REF 1,4 - See Note 4 for Model Number NOTES: 1 PRINTING TYPE: TRANSFER METHOD. COLOR: BLACK TEXT 8 PT ARIAL NON-BOLD LOCATED APPROXIMATELY AS SHOWN. 2 PRINTING TYPE: TRANSFER METHOD. COLOR: BLACK TEXT 6 PT ARIAL NON-BOLD LOCATED APPROXIMATELY AS SHOWN. MATERIAL: ADC PART NUMBER 1215140 3 4 FSN-2500-1-WMAX

InterReach® Fusion Remote Access Unit Location of FCC ID Location of FCC/IC Label

InterReach® Fusion Remote Access Unit Top View InterReach® Fusion Remote Access Unit Top View – Covers Removed InterReach® Fusion Remote Access Unit Bottom View InterReach® Fusion Remote Access Unit Top View - 1 InterReach® Fusion Remote Access Unit Top View - 2 InterReach® Fusion Remote Access Unit Top View - 3 InterReach® Fusion Remote Access Unit Top View - 4 InterReach® Fusion Remote Access Unit Top View - 5

ADC Telecommunications Test Report Summary FCC CFR 47, Part 27 Wireless Communications Service Manufacturer: ADC Telecommunications Name of Equipment: InterReach® Fusion Remote Access Unit Model Number(s): FSN-2500-1-WMAX Manufacturer’s Address: P.O. Box 1101 Minneapolis, MN 55440-1101 Test Report Number: MN080326 Test Date(s): 21 March, 2008 (ETL) 25 March, 2008 (ADC) According to testing performed at Intertek, the above-mentioned unit is in accordance with the applicable electromagnetic compatibility (EMC) portions of the requirements defined in FCC Part 27. It is the manufacturer’s responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical characteristics. Any modifications necessary for compliance made during testing on the above mentioned date(s) must be implemented in all production units for compliance to be maintained. All testing was done in accordance with the Federal Communications Commission’s CFR 47 Part 27 and the EUT fulfills the requirements of the Federal Communications Commission’s CFR 47 Part 27. Date: 26 March, 2008 Location: Intertek Testing Services (ETL) ADC Telecommunications 7250 Hudson Blvd., Suite 100 5341 12 th Ave E Oakdale, MN 55128 Shakopee, MN 55379 Phone: (651) 730-1188 Phone: (952) 403-8340 Fax: (651) 730-1282 Fax: (952) 403-8858 Testing Conducted by (ADC): And Report Written by: Mark F. Miska Compliance Engineer 1 of 101 MN080326 ADC Telecommunications EMC Emission – T E S T R E P O R T Test Report File Number: MN080326 Date of Issue: 26 March, 2008 Model Number(s): FSN-2500-1-WMAX Product Name: InterReach® Fusion Remote Access Unit Product Type: Repeater Applicant: ADC Telecommunications Manufacturer: ADC Telecommunications License Holder: ADC Telecommunications Address: P.O. Box 1101 Minneapolis, MN 55440-1101 Test Result: ▪ Positive ▫ Negative Test Project Number: 3147568MIN-001 Reference(s) Total pages including Appendices: 101 2 of 101 MN080326 ADC Telecommunications Table of Contents 1.0 Revision Description .............................................................................................. 4 2.0 Documentation ..................................................................................................... 4 2.1 Test Regulations ................................................................................................ 4 2.2 Test Operation Mode .......................................................................................... 5 2.3 Configuration of the device under test: ................................................................. 5 2.4 Product Options: ................................................................................................ 5 2.5 EUT Specifications and Requirements: .................................................................. 5 2.6 Cables: ............................................................................................................. 5 2.7 Power Requirements: ......................................................................................... 5 2.8 Typical Installation and/or Operating Environment: ................................................. 5 2.9 Other Special Requirements: ............................................................................... 5 2.10 EUT Software: ................................................................................................ 5 2.11 EUT System Components ................................................................................. 6 2.12 Support Equipment .......................................................................................... 6 2.13 Deviations from standard: ................................................................................ 6 2.14 General Remarks: ........................................................................................... 6 2.15 Summary: ...................................................................................................... 6 3.0 Test Set-up Drawings and Photos ............................................................................ 7 3.1 Test set-up photo, radiated emissions ................................................................... 7 3.2 Test set-up photo, radiated emissions ................................................................... 8 3.3 Test Set-up Drawings ......................................................................................... 9 4.0 Test Results ....................................................................................................... 11 4.1.1 27.50 RF Power Limits ................................................................................. 11 4.1.2 27.54 Frequency Stability ............................................................................ 12 4.1.3 27.53 Emission Limitations .......................................................................... 13 5.0 Test Equipment .................................................................................................. 14 6.0 Appendix A ........................................................................................................ 15 7.0 Appendix B ........................................................................................................ 67 8.0 Appendix C ....................................................................................................... 100 3 of 101 MN080326 ADC Telecommunications 1.0 REVISION DESCRIPTION Rev Total Pages Date Description A 101 26 March, 2008 Original Release 2.0 DOCUMENTATION 2.1 Test Regulations 27.50 Power limits 27.53 Emission limits 27.54 Frequency stability The emissions tests were performed according to the following regulations: ▫ FCC Part 22 ▫ FCC Part 24 ▪ FCC Part 27 ▫ FCC Part 90 ▫ IC RSS-131 Issue 2 Environmental Conditions in the lab: ADC ETL Temperature: 22º C 15-35º C Relative Humidity: 24% 30-60% Atmospheric Pressure: 97.5 kPa 86-106 kPa Power Supply Utilized: Power Supply System : 1 …

Text truncated - open the document above for the full version.