FCCID.CO- FCC ID Database
HomeCompaniesEquipment ClassesSearch

© 2026 FCC ID Database. All rights reserved.

AboutContactData sourced from FCC public records
  1. Home/
  2. ADC Telecommunications Inc./
  3. NOO-F0695-011

NOO-F0695-011InterReach Fusion CELL-PCS-700 MHz LTE Upper C Main HUB, Expansion HUB and Remote Access Unit

ADC Telecommunications Inc.
InterReach Fusion CELL-PCS-700 MHz LTE Upper C Main HUB, Expansion HUB and Remote Access Unit - FCC ID NOO-F0695-011 - ADC Telecommunications Inc.
Click to zoom

Application Details

Equipment Class
PCB - PCS Licensed Transmitter
Date of Grant
Mar 25, 2011
Application Purpose
Original Equipment
Date of Application
Mar 24, 2011
Equipment Note
InterReach Fusion CELL-PCS-700 MHz LTE Upper C Main HUB, Expansion HUB and Remote Access Unit
Frequency Range
746.00000000 - 757.00000000
Company
ADC Telecommunications Inc.
Country
United States

Documents & Files

Select a file to view

Users Manual

↗

Cover Letter(s)

↗

External Photos

↗

ID Label/Location Info

↗

Internal Photos

↗

RF Exposure Info

↗

Test Report

↗

Test Setup Photos

↗

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

InterReach Fusion ® Installation, Operation, and Reference Manual ADCP-77-042 • Issue 3 • 1/2011 D-620610-0-20 Rev E ADCP-77-042 • Issue 3 • 1/2011 • Preface Page ii COPYRIGHT © 2011, ADC Telecommunications, Inc. All Rights Reserved REVISION HISTORY LIST OF CHANGES The technical changes incorporated into this issue are listed below. TRADEMARK INFORMATION ADC is a registered trademark and InterReach, InterReach Unison, InterReach Fusion, WAVEXchange, FlexWave are registered trademarks and trademarks of ADC Telecommunications, Inc. All other products, company names, service marks, and trademarks mentioned in this document or website are used for identification purposes only and may be owned by other companies. DISCLAIMER OF LIABILITY Contents herein are current as of the date of publication. ADC reserves the right to change the contents without prior notice. In no event shall ADC be liable for any damages resulting from loss of data, loss of use, or loss of profits and ADC further disclaims any and all liability for indirect, incidental, special, consequential or other similar damages. This disclaimer of liability applies to all products, publications and services during and after the warranty period. This publication may be verified at any time by contacting ADC’s Technical Assistance Center at 1-800-366-3891, extension 73476 (in U.S.A. or Canada) or 952-917-3476 (outside U.S.A. and Canada), or by e-mail to [email protected]. ISSUEDATEREASON FOR CHANGE 17/2008First ADC release. 212/2008Update compliance section. 31/2011Add Fusion 700 UC/850/1900 product content. PAGEIDENTIFIERDESCRIPTION OF CHANGE -Add Fusion 700 UC/850/1900 product content. ADC Telecommunications, Inc. P.O. Box 1101, Minneapolis, Minnesota 55440-1101 In U.S.A. and Canada: 1-800-366-3891 Outside U.S.A. and Canada: (952) 938-8080 Fax: (952) 917-1717 ADC Telecommunications, Inc. 541 E. Trimble Road, San Jose, California 95131-1224 USA In U.S.A. and Canada: 1-800-530-9960 Outside U.S.A. and Canada: 1-408-952-2400 Fax: 1-408-952-2410 InterReach Fusion Installation, Operation, and Reference Manual1 D-620610-0-20 Rev ECONFIDENTIAL Table of Contents SECTION 1General Information . . . . . . . . . . . . . . . . . . . . . . 1-1 1.1 Firmware Release. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 1.2 Purpose and Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 1.3 Conventions in this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 1.4 Standards Conformance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 1.5 Related Publications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 SECTION 2 InterReach Fusion System Description . . . . . . 2-1 2.1 System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 2.2 System Hardware Description . . . . . . . . . . . . . . . . . . . . . . . . 2-3 2.3 System OA&M Capabilities Overview . . . . . . . . . . . . . . . . . 2-5 2.3.1 System Monitoring and Reporting . . . . . . . . . . . . . . . . . . . . . 2-6 2.3.2 Using Alarm Contacts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6 2.4 System Connectivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7 2.5 System Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8 2.6 System Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9 2.6.1 RF End-to-End Performance. . . . . . . . . . . . . . . . . . . . . . . . . 2-12 SECTION 3Fusion Main Hub . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 3.1 Fusion Main Hub Overview. . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 3.2 Fusion Main Hub Front Panel. . . . . . . . . . . . . . . . . . . . . . . . . 3-4 3.2.1 Optical Fiber Uplink/Downlink Ports. . . . . . . . . . . . . . . . . . . 3-5 3.2.2 Communications RS-232 Serial Connector . . . . . . . . . . . . . . 3-5 3.2.3 Main Hub LED Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5 3.3 Fusion Main Hub Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . 3-8 3.3.1 Fusion Main Hub Rear Panel Connectors. . . . . . . . . . . . . . . . 3-8 3.3.1.1 9-pin D-sub Connector . . . . . . . . . . . . . . . . . . . . . . . . . 3-8 3.3.1.2 N-type Female Connectors . . . . . . . . . . . . . . . . . . . . . . 3-9 3.4 Main Hub Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10 3.5 Faults, Warnings, and Status Messages . . . . . . . . . . . . . . . . 3-11 3.5.1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11 CONFIDENTIAL 2InterReach Fusion Installation, Operation, and Reference Manual D-620610-0-20 Rev E 3.5.2 View Preference. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12 SECTION 4Fusion Expansion Hub . . . . . . . . . . . . . . . . . . . . 4-1 4.1 Expansion Hub Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 4.2 Expansion Hub Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 4.2.1 75 Ohm Type F Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4 4.2.2 Manufacturing RS-232 Serial Connector . . . . . . . . . . . . . . . . 4-4 4.2.3 Optical Fiber Uplink/Downlink Connectors . . . . . . . . . . . . . . 4-4 4.2.4 LED Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5 4.3 Expansion Hub Rear Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7 4.4 Faults, Warnings, and Status Messages. . . . . . . . . . . . . . . . . . 4-9 4.5 Expansion Hub Specifications . . . . . . . . . . . . . . . . . . . . . . . 4-10 SECTION 5 Remote Access Unit . . . . . . . . . . . . . . . . . . . . . . 5-1 5.1 RAU Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 5.2 Remote Access Unit Connectors. . . . . . . . . . . . . . . . . . . . . . . 5-6 5.2.1 50 Ohm Type-N Connector. . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 5.2.2…

Text truncated - open the document above for the full version.

Cover Letter(s)

Mailing Address: P.O. Box 1101, Minneapolis, Minnesota 55440-1101 World Headquarters: Minneapolis, Minnesota USA +1.952.938.8080 www.adc.com ADC Telecommunications Inc. Address: P.O. Box 1101, Minneapolis, Minnesota 55440-1101 FCC Confidential Authorization Date: Jan, 6 th , 2011 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Confidentiality Request regarding application for certification of FCC ID: NOO-F0695-011 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: • Detailed Circuit Schematics of EUT--- (Long term)  BOM--- (Long term)  Block Diagram--- (Long term)  Operation Description--- (Long term)  T he above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely Yours, Weili Wang Director of RF Engineering ADC Telecommunications Inc

External Photos

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS EUT Top View – RAU EUT Bottom View – RAU EUT Front View – RAU EUT Rear View – RAU EUT Side View – RAU Support Equipment Front View – Expansion Hub Support Equipment Rear View – Expansion Hub Support Equipment Front View – Main Hub Support Equipment Rear View – Main Hub

ID Label/Location Info

Mailing Address: P.O. Box 1101, Minneapolis, Minnesota 55440-1101 World Headquarters: Minneapolis, Minnesota USA +1.952.938.8080 www.adc.com FCC ID label: P/N label: Mailing Address: P.O. Box 1101, Minneapolis, Minnesota 55440-1101 World Headquarters: Minneapolis, Minnesota USA +1.952.938.8080 www.adc.com FCC ID label location P/N label location

Internal Photos

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS EUT Open Case Top View – RAU EUT Main PCB (with RF Shield) Top View – RAU EUT Main PCB (without RF Shield) Top View – RAU EUT Main PCB (with RF Shield) Bottom View – RAU EUT Main PCB (without RF Shield) Bottom View – RAU

RF Exposure Info

ADC Telecommunications, Inc. FCC ID: NOO-F0695-011 Report No.: RSZ11011101 Page 9 of 160 FCC Part 22H/24E/27 Test Report FCC §1.1307 & §2.1091 - MAXIMUM PERMISSIBLE EXPOSURE (MPE) Applicable Standards According to FCC §1.1307 (b)(1) and §2.1091 systems operating under the provisions of this section shall be operated in a manner that ensures the public is not exposed to RF energy level in excess of the communication guidelines. Limits for General Population/Uncontrolled Exposure Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mw/cm 2 ) Averaging Time (Minutes) 0.3-1.34 614 1.63 *(100) 30 1.34-30 824/f 2.19/f *(180/f 2 ) 30 30-300 27.5 0.073 0.2 30 300-1500 / / f/1500 30 1500-100,000 / / 1.0 30 f = frequency in MHz * = Plane-wave equivalent power density Test Data Predication of MPE limit at a given distance S = PG/4πR² Where: S = power density (in appropriate units, e.g. mW/cm 2 ) P = power input to the antenna (in appropriate units, e.g., mW). G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor, is normally numeric gain. R = distance to the center of radiation of the antenna (appropriate units, e.g., cm) Cellular Band: Antenna Gain Conducted Power Band Mode Frequency (MHz) (dBi) (numeric)(dBm)(mW) Evaluation Distance (cm) Power Density (mW/cm 2 ) MPE Limit (mW/cm 2 ) Cellular Downlink 881.6 3 2.0 16.87 48.64 20 0.019 0.588 PCS Downlink 1960 3 2.0 16.83 48.19 20 0.019 1.00 700 LTE Downlink 752 3 2.0 15.01 31.69 20 0.0126 0.501 Result: The device meets the MPE limit at 20 cm distance.

Test Report

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. This report must not be used by the customer to claim product certification, approval, or endorsement by NVLAP*, NIST, or any agency of the Federal Government. * This report contains data that are not covered by the NVLAP accreditation and are marked with an asterisk “★” (Rev.2) FCC PART 22H, 24E & 27 MEASUREMENT AND TEST REPORT For ADC Telecommunications, Inc. P.O. Box 1101, Minneapolis, Minnesota 55440, USA FCC ID: NOO-F0695-011 Report Type: Original Report Product Type: InterReach Fusion System, RAU Test Engineer: Alvin Huang Report Number: RSZ11011101 Report Date: 2011-03-16 Reviewed By: Merry Zhao EMC Engineer Prepared By: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F, the 3rd Phase of WanLi Industrial Building, ShiHua Road, FuTian Free Trade Zone Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 ADC Telecommunications, Inc. FCC ID: NOO-F0695-011 Report No.: RSZ11011101 Page 2 of 160 FCC Part 22H/24E/27 Test Report TABLE OF CONTENTS GENERAL INFORMATION.......................................................................................................................................4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) .....................................................................................4 OBJECTIVE...................................................................................................................................................................4 RELATED SUBMITTAL(S)/GRANT(S).............................................................................................................................4 TEST METHODOLOGY..................................................................................................................................................4 TEST FACILITY.............................................................................................................................................................5 SYSTEM TEST CONFIGURATION ..........................................................................................................................6 JUSTIFICATION.............................................................................................................................................................6 EQUIPMENT MODIFICATIONS.......................................................................................................................................6 LOCAL SUPPORT EQUIPMENT LIST AND DETAILS........................................................................................................6 EXTERNAL I/O CABLE..................................................................................................................................................6 CONFIGURATION OF TEST SETUP.................................................................................................................................7 BLOCK DIAGRAM OF TEST SETUP................................................................................................................................7 SUMMARY OF TEST RESULTS ...............................................................................................................................8 FCC §1.1307 & §2.1091 - MAXIMUM PERMISSIBLE EXPOSURE (MPE)............................................................9 APPLICABLE STANDARDS.............................................................................................................................................9 TEST DATA..................................................................................................................................................................9 FCC §2.1047 - MODULATION CHARACTERISTIC ............................................................................................10 FCC §2.1046, §22.913(A), §24.232(C) & §27.50 - RF OUTPUT POWER ..............................................................11 APPLICABLE STANDARD............................................................................................................................................11 TEST PROCEDURE......................................................................................................................................................11 TEST EQUIPMENT LIST AND DETAILS.........................................................................................................................11 TEST DATA................................................................................................................................................................12 FCC §2.1049, §22.917, §22.905, §24.238 & §27.53 - OCCUPIED BANDWIDTH .................................................14 APPLICABLE STANDARDS...........................................................................................................................................14 TEST PROCEDURE......................................................................................................................................................14 TEST EQUIPMENT LIST AND DETAILS.........................................................................................................................14 TEST DATA................................................................................................................................................................14 FCC §2.1051, §22.917(A), §24.238(A) & §27.53 - SPURIOUS EMISSIONS AT ANTENNA TERMINALS .....71 APPLICABLE STANDARDS...........................................................................................................................................71 TEST PROCEDURE......................................................................................................................................................71 TEST …

Text truncated - open the document above for the full version.

Test Setup Photos

EXHIBIT D - TEST SETUP PHOTOGRAPHS Below 1 GHz: Spurious Radiated Emissions – Front View Below 1 GHz: Spurious Radiated Emissions – Rear View Above 1 GHz: Spurious Radiated Emissions – Front View Above 1 GHz: Spurious Radiated Emissions – Rear View

Contact Information

Applicant

Joshua Wittman(Compliance Engineer)
[email protected]952-403-8322Fax: 952-403-8858

Test Firm

Bay Area Compliance Laboratory Corp. (Shenzhen)John Chan
[email protected]08675533320018Fax: 08675533320008

Technical Specifications

#Rule PartsFrequency RangePower OutputEmissionTolerance
127746 MHz - 757 MHz44.00 mW8M95G1D0.1 ppm
Confidentiality
Long Term
Grant Notes
Output list is conducted output; The antenna gain is restricted to 1.5 Watt ERP (2.49 Watt EIRP) in order to satisfy RF exposure compliance requirement and must be installed with a separation distance of at least 20 cm from all persons. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of �1.1307(b)(3) for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of �1.1307(b)(3) of the rules. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations

Other Applications from ADC Telecommunications Inc.

FSN-2525-1-TDD - FCC ID NOO-F0851-111 - ADC Telecommunications Inc.
NOO-F0851-111

FSN-2525-1-TDD

Mar 31, 2015

Equipment Class

B2I - Part 20 Industrial Booster (CMRS)
SPT-S3-2323-12-HP - FCC ID NOO-S2782-011 - ADC Telecommunications Inc.
NOO-S2782-011

SPT-S3-2323-12-HP

Mar 19, 2015

Equipment Class

B2I - Part 20 Industrial Booster (CMRS)
InterReach Spectrum Remote Access Unit - FCC ID NOO-S2195-011 - ADC Telecommunications Inc.
NOO-S2195-011

InterReach Spectrum Remote Access Unit

May 14, 2014

Equipment Class

B2I - Part 20 Industrial Booster (CMRS)
InterReach Fusion 700 MHz (Upper C) LTE, 850 MHz and high power 1900 MHz Multi-Band - FCC ID NOO-F0688-011 - ADC Telecommunications Inc.
NOO-F0688-011

InterReach Fusion 700 MHz (Upper C) LTE, 850 MHz and high power 1900 MHz Multi-Band

Feb 05, 2013

Equipment Class

PCB - PCS Licensed Transmitter
InterReach Fusion� 700 MHz (Lower ABC), AWSMIMO HP - FCC ID NOO-F0699-011 - ADC Telecommunications Inc.
NOO-F0699-011

InterReach Fusion� 700 MHz (Lower ABC), AWSMIMO HP

Jan 23, 2013

Equipment Class

TNB - Licensed Non-Broadcast Station Transmitter