NPQFCS8900Single-Band Cellular Phone (CDMA)

FCC ID: NPQFCS8900 Copyright Ⓒ 2005, DIGITAL EMC Co., Ltd. ATTACHMENT N: USER`S MANUAL FCS-8900 (Avvio8000) 1 CONTENTS 1. SAFETY INFORMATION----------------------------------------------------------------------- 2. PREPARE YOUR PHONE FOR USE -------------------------------------------------------- 2.1 Install the battery ---------------------------------------------------------------------------- 2.2 Charge the battery --------------------------------------------------------------------------- 2.2.1 Base 2.2.2 Handy 3. FEATURE HIGHLIGHTS ---------------------------------------------------------------------- 4. ABOUT THE PHONE --------------------------------------------------------------------------- 4.1 Name and function --------------------------------------------------------------------------- 4.2 Key functions ---------------------------------------------------------------------------------- 4.3 Display indicators ----------------------------------------------------------------------------- 4.3.1 Idle screen ---------------------------------------------------------------------------- 4.3.2 Scroll Bar ----------------------------------------------------------------------------- 4.4 Icons -------------------------------------------------------------------------------------------- 5. BASIC OPERATIONS ---------------------------------------------------------------------------- 5.1 Power ON and OFF---------------------------------------------------------------------------- 5.2. Make a call -------------------------------------------------------------------------------------- 5.3 Answer a call ----------------------------------------------------------------------------------- 5.4 Adjust the volume ----------------------------------------------------------------------------- 5.5 Redial the recent call number ---------------------------------------------------------------- 5.6 Caller ID ---------------------------------------------------------------------------------------- 5.7 Out of Range display and warning tone --------------------------------------------------- 5.8 Paging------------------------------------------------------------------------------------------- 5.9 Handy and Base ID settings------------------------------------------------------------------ 2 5.10 SMS and Voice mail-------------------------------------------------------------------------- 6. USE PHONE MENUS --------------------------------------------------------------------------- 6.1 Navigate menus ----------------------------------------------------------------------------- 6.1.1 Scroll through menus -------------------------------------------------------------- 6.1.2 Use a shortcut------------------------------------------------------------------------ 6.1.3 Exit menu levels -------------------------------------------------------------------- 6.2 List of Menus --------------------------------------------------------------------------------- 7. ENTER LETTERS AND NUMBERS ----------------------------------------------------------- 7.1 Enter Letters ----------------------------------------------------------------------------------- 7.1.1 Edit name ----------------------------------------------------------------------------- 7.1.2 Change case of letters and numbers ----------------------------------------------- 8. USE THE PHONE BOOK ------------------------------------------------------------------------- 8.1 About the phone book ------------------------------------------------------------------------- 8.2 Add a new phone book Entry ---------------------------------------------------------------- 8.3 Edit Entry---------------------------------------------------------------------------------------- 8.4 Search Entry ------------------------------------------------------------------------------------ 8.5 Search Name ----------------------------------------------------------------------------------- 8.6 Erase --------------------------------------------------------------------------------------------- 8.7 My Phone # ------------------------------------------------------------------------------------- 9. USE CALL LOGS ---------------------------------------------------------------------------------- 9.1 Check Missed / Received / Dialed Calls--------------------------------------------------- 9.2 Erase Logs ------------------------------------------------------------------------------------- 9.3 Call Duration----------------------------------------------------------------------------------- 10. USE SMS (SHORT MESSAGE SERVICE) -------------------------------------------------- 10.1 Send a Text Message ----------------------------------------------------------------------- 10.2 View Inbox / Outbox------------------------------------------------------------------------ 10.3 Erase a message ----------------------------------------------------------------------------- 10.4 Message Settings ---------------------------------------------------------------------------- 3 10.5 Use Voice mail ------------------------------------------------------------------------------ 11. SET SOUND --------------------------------------------------------------------------------------- 11.1 Set Ring Type ------------------------------------------------------------------------------- 11.2 Set Ring Tone ------------------------------------------------------------------------------- 11.3 Set Ring Volume ---------------------------------------------------------------------------- 11.4 Set Key Tone -------------------------------------------------------------------------------- 11.5 Set Sound Setting---------------------------------------------------------------------------- 11.6 Set Alarm------------------------------------------------------------------------------------- 12. USE SETTINGS ------------------------------------------------------------------------------------ 12.1 Set Auto Redial -----------------------------------------------------------------…

Text truncated - open the document above for the full version.

4th ~ 7th Fl. Namjeun Bldg. 53-3 Haan-Dong Gwangmyung-Si, Kyunggido-Do, 423-060, Korea Sep 24, 2005 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 LETTER OF AUTHORIZATION To whom it may concern: We, the undersigned, hereby authorize DIGITAL EMC Co., Ltd., to act on our behalf in all manners relating to application for equipment authorization for FCC ID: NPQFCS8900. including signing of all documents relating to these matters. Any and all acts carried out by DIGITAL EMC Co., Ltd., on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from Telian Corporation. Sincerely, W.H WHANG/Senior Engineer

4th ~ 7th Fl. Namjeun Bldg. 53-3 Haan-Dong Gwangmyung-Si, Kyunggido-Do, 423-060, Korea Sep 24, 2005 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 In re : Telian Corporation. FCC ID : NPQFCS8900 Request for Confidentiality Gentlemen: In accordance with 0.459 of CFR 47, Telian Corporation. hereby requests confidentiality of the Block diagram, Schematics, Parts list, Turn up procedure and Operational description of the attached test report. These documents contain detailed system and equipment description and related information about the product which Telian Corporation. considers to be proprietary, confidential, and a custom design and, otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, Telian Corporation. considers that this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Sincerely, W.H WHANG/Senior Engineer

4th ~ 7th Fl. Namjeun Bldg. 53-3 Haan-Dong Gwangmyung-Si, Kyunggido-Do, 423-060, Korea Sep 24, 2005 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 In re: Telian Corporation. FCC ID: NPQFCS8900 Request for Short-Term Confidentiality To Whom It May Concern: In accordance with 0.457 and 0.459 of CFR 47, Telian Corporation requests short-term confidentiality for the test setup photos, external photos, internal photos, and user’s manual of the attached test report. These documents contain detailed system and equipment descriptions and related information about the product, which Telian Corporation considers to be proprietary, confidential, and a custom design and otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, Telian Corporation feels that this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give our competitors an unfair advantage in the market. Sincerely, W.H WHANG/Senior Engineer

TCB Application Form 731 Rev 01 Mar 02 Item 1. Applicant’s complete, legal business name: Telian Corporation Applicant’s FCC Registration Number (FRN): 0008163867 Item 2. Applicant’s mailing address: fill in fields, as appropriate Line 1: 4th ~ 7th Fl. Namjeun Bldg. 53-3 Haan-Dong Line 2: P.O. Box: City: Gwangmyung-Si, Kyunggi-Do State: Country (if foreign address): KOREA Zip/Postal Code: 423-060 Item 3. FCC ID consisting of: Grantee Code: NPQ Equipment Product Code (14 characters maximum): FCS8900 include “dashes” (-) where appropriate Item 4. Person to receive grant: this is the APPLICANT’S contact person, NOT the Test Lab’s First Name:Wonhwa Mail Stop: Last Name: Hwang Telephone: +82-2-890-0243 Title: SENIOR ENGINEER Fax No.: +82-2-890-0332 E-mail: [email protected] Item 5. Test Firm Contact (if different from applicant): fill in fields, as appropriate Firm Name: Digital EMC Co., Ltd Telephone: +82-31-321-2664 Ext: Fax: No.: +82-31-321-1664 First Name:HARVEY Middle Initial: Last Name:SUNG Address Line 1:683-3, Yubang-Dong P.O. Box: Address Line 2: City:Yongin-Si State:Kyunggi-Do Country (if foreign address):KOREA Zip/Postal Code:449-080 E-mail:[email protected] Item 6a. Name of Test Firm and Contact Person on file with the FCC: DIGITAL EMC CO., LTD. Item 6b. FCC Registered Test Site Number. Required for Part 15 and 18 applications. 101842 Item 7. Non-Technical Contact if Different: Firm Name: Digital EMC Co.,Ltd. Telephone: +82-31-321-2664 Ext.: Fax No.: +82-31-321-1664 First Name:Harvey Middle Initial: Last Name:Sung Address Line 1:683-3, Yubang-Dong P.O. Box: Address Line 2: City:Yongin-Si State:Kyunggi-Do Country (if foreign address):KOREA Zip/Postal Code:449-080 E-mail:[email protected] Item 8. * Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR 0.459 of the Commission Rules? Yes No Item 9. *Is this application for modular approval? Yes No If yes, please submit a cover letter addressing the modular approval requirements of DA 00-1407. Item 10. *Is this application for software defined radio authorization? Yes No Item 11. Equipment Class: 3-digits required PCE Description of Product as it is marketed: SINGL-BAND CDMA PHONE Item 12. *Application is for: Original Equipment Change in identification of presently authorized equipment: Original FCC ID Grant Date (MM/DD/YYYY) Class II permissive change or modification of presently authorized equipment Class III permissive change to software defined radio Note: this may only be filed for applications pertaining to Software Defined Radio Item 13. Is the equipment in this application: * (a) a composite device subject to an additional equipment authorization? * (b) part of a system that operates with, or is marketed with, another device that requires an equipment authorization? If either of the above questions is answered “Yes” complete section 12 (c). Yes No Yes No (c) The related application: has been granted under the FCC ID listed to the right is in the process of being filed under the FCC ID listed to the right is pending with the FCC under the FCC ID listed to the right FCC ID * Equipment will be operated under FCC Rule Part(s): 22H, 24E Item 14. EQUIPMENT SPECIFICATIONS: Where applicable Frequency range in MHz Rated RF power output IN WATTS Frequency tolerance %, Hz, ppm Emission Designator (See 47 CFR 2.201 and 2.202) Microprocessor model number 824.7 848.31 0.673 2.5 ppm 1M27F9W Read each certification carefully before answering and signing this application WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND/OR IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312 (a) (1)), AND/OR FORFEITURE (U.S. TITLE 47, SECTION 503). Item 15. (This Section intentionally left blank) Item 16. APPLICANT/AGENT CERTIFICATION: I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization issued by the TCB, under the authority of the FCC, as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. Authorizing an agent to sign this application, is done solely at the applicant’s discretion; however, the applicant remains responsible for all statements in this application. If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above Section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time. *Signature of Authorized Applicant:Harvey Sung Title of Authorized Signature:Technical Director Complete items below if an agent signs the application Firm Name: DIGITAL EMC Co.,Ltd. Telephone: +82-31-321-2664 Ext.: Fax No.: +82-31-321-1664 First Name:Harvey Middle Initial: Last Name:Sung Address Line 1:683-3, Yubang-Dong P.O. Box: Address Line 2: City: Yongin-Si State: Kyunggi- Do Country (if foreign address): KOREA Zip/Postal Code: 449-080 NOTE: An asterisk ‘*’ preceding a field indicates it must be completed.

4th ~ 7th Fl. Namjeun Bldg. 53-3 Haan-Dong Gwangmyung-Si, Kyunggido-Do, 423-060, Korea Sep 24, 2005 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 AFFIDAVIT FOR ESN PROTECTION OF CELLULAR MOBILE TELEPHONES We hereby certify that the handheld portable cellular phone(FCC ID : NPQFCS8900) is so designed that it complies with all the requirements for ESN protection specified in Section 22.919 of the FCC Rules. a) The transmitter in service has a unique ESN. b) The ESN host component is permanently attached to a main circuit board of the mobile transmitter and the integrity of the unit operating software can not be altered. The ESN is plated from fraudulent contact and tampering. The ESN is encoded using multiplication by a polynomial and ESN data programmed in the memory with other information. c) The ESN is factory-set and can not be altered, transferred, removed or otherwise able to be manipulated. Cellular mobile equipment is specifically designed such that any attempt to remove, tamper with, or change the ESN chip, its logic system, or firmware original programmed by the manufacturer will render the transmitter inoperative. Sincerely, Sincerely, W.H WHANG/Senior Engineer

FCC ID: NPQFCS8900 Copyright Ⓒ 2005, DIGITAL EMC Co., Ltd. ATTACHMENT G: EXTERNAL PHOTOGRAPHS FCC ID: NPQFCS8900 Copyright Ⓒ 2005, DIGITAL EMC Co., Ltd. View 1 FCC ID: NPQFCS8900 Copyright Ⓒ 2005, DIGITAL EMC Co., Ltd. View 2 FCC ID: NPQFCS8900 Copyright Ⓒ 2005, DIGITAL EMC Co., Ltd. View 4 FCC ID: NPQFCS8900 Copyright Ⓒ 2005, DIGITAL EMC Co., Ltd. View 5 FCC ID: NPQFCS8900 Copyright Ⓒ 2005, DIGITAL EMC Co., Ltd. View 6

FCC ID: NPQFCS8900 Copyright ○ c 2005, DIGITAL EMC Co., Ltd. ATTACHMENT E: FCC ID LABEL & LOCATION FCC ID: NPQFCS8900 Copyright ○ c 2005, DIGITAL EMC Co., Ltd. FCC ID SAMPLE LABEL & LOCATION LABELLING REQUIREMENTS PER §2.925 The Label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time of purchase Note: 1. The label generally is located underneath a back door of the phone. 2. Because The device is so small that it is not practicable to place the statement specified under 15.19 statement request, the information required by this paragraph shall be placed in a prominent location in the user's manual. (SEE NEXT PAGE)

FCC ID: NPQFCS8900 Copyright Ⓒ 2005, DIGITAL EMC Co., Ltd. ATTACHMENT H: INTERNAL PHOTOGRAPHS FCC ID: NPQFCS8900 Copyright Ⓒ 2005, DIGITAL EMC Co., Ltd. View 1 FCC ID: NPQFCS8900 Copyright Ⓒ 2005, DIGITAL EMC Co., Ltd. View 2 FCC ID: NPQFCS8900 Copyright Ⓒ 2005, DIGITAL EMC Co., Ltd. View 3 FCC ID: NPQFCS8900 Copyright Ⓒ 2005, DIGITAL EMC Co., Ltd. View 4 FCC ID: NPQFCS8900 Copyright Ⓒ 2005, DIGITAL EMC Co., Ltd. View 5(900MHz Receiver) FCC ID: NPQFCS8900 Copyright Ⓒ 2005, DIGITAL EMC Co., Ltd. View 6(900MHz Receiver) FCC ID: NPQFCS8900 Copyright Ⓒ 2005, DIGITAL EMC Co., Ltd. View 7

FCC ID:NPQFCS8900 Copyright ○ c 2005, DIGITAL EMC Co., Ltd. ATTACHMENT :SAR VALIDATION PLOTS DIGITAL EMC CO., LTD DUT: Dipole 835 MHz; Type: D835V2; Serial: D835V2 - SN:464 Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium parameters used: f = 835 MHz; σ = 0.922 mho/m; ε r = 40.1; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY4 Configuration: Probe: ET3DV6 - SN1703; ConvF(6.51, 6.51, 6.51); Calibrated: 2005-03-24; Electronics: DAE3 Sn520 Phantom: SAM with 835MHz; Type: SAM; Serial: TP-1223 Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Test Date: 2005-08-03; Ambient Temp: 23.0; Tissue Temp: 21.5 Dipole Validation Area Scan (51x101x1): Measurement grid: dx=15mm, dy=15mm Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Power Drift = -0.100 dB Peak SAR (extrapolated) = 4.00 W/kg SAR(1 g) = 2.59 mW/g; SAR(10 g) = 1.67 mW/g 0 dB = 2.81mW/g

FCC ID:NPQFCS8900 Copyright ○ c 2005, DIGITAL EMC Co., Ltd. ATTACHMENT : PROBE CALIBRATION

FCC ID:NPQFCS8900 Copyright ○ c 2005, DIGITAL EMC Co., Ltd. ATTACHMENT : DIPOLE CALIBRATION

DEMC#DR50110508F Copyright ○ c 2005, DIGITAL EMC Co., Ltd. Page 1 of 22 683-3, Yubang-Dong, Yongin-Si, Kyunggi-Do, Korea. 449-080 Tel: +82-31-321-2664 Fax: +82-31-321-1664 http://www.digitalemc.com SAR TEST REPORT Dates of Tests: August 3, 2005 Test Report S/N:DR50110508F Test Site : DIGITAL EMC CO., LTD. FCC ID APPLICANT FCC Classification: Licensed Portable Transmitter Held to Ear (PCE) EUT Type: Single-Band CDMA Phone Model Name FCS-8900 Test Device Serial No.: Identical prototype TX Frequency Range: 824.70 ~848.31 MHz (CDMA) RX Frequency Range: 869.70 ~893.31 MHz (CDMA) Max. RF Output Power: 0.673W ERP CDMA (28.28dBm) Max. SAR Measurement: 1.000 mW/g CDMA Head SAR 0.526 mW/g CDMA Body SAR Application Type: Certification Rule Part(s): §2.1093; FCC/OET Bulletin Supplement C[July 2001] Data of issue: August 16, 2005 Tested by : Reviewed by : Ha-Na Ryu(Engineer) Harvey Sung (Chief Engineering Director) This wireless portable device has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment/general population exposure limits specified in ANSI/IEEE Std. C95.1-1992 and had been tested in accordance with the measurement procedures specified in FCC/OET Bulletin 65 Supplement C (2001) and IEEE Std. 1528-2003. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. NPQFCS8900 Telian Corporation DEMC#DR50110508F Copyright ○ c 2005, DIGITAL EMC Co., Ltd. Page 2 of 22 1. INTRODUCTION ...................................................................................................... 3 SAR DEFINITION .................................................................................................... 3 2. SAR MEASUREMENT SETUP......................................................................................... 4 Robotic System.......................................................................................................... 4 System Hardware ....................................................................................................... 4 System Electronics...................................................................................................... 4 3. DASY4 E-FIELD PROBE SYSTEM................................................................................... 5 Probe Measurement System......................................................................................... 5 Probe Specifications .................................................................................................... 5 4. Probe Calibration Process............................................................................................ 6 Dosimetric Assessment Procedure.................................................................................. 6 Free Space Assessment ............................................................................................... 6 Temperature Assessment ............................................................................................ 6 5. PHANTOM & EQUIVALENT TISSUES.............................................................................. 7 SAM Phantom ........................................................................................................... 7 Brain & Muscle Simulating Mixture Characterization ....................................................... 7 Device Holder for Transmitters..................................................................................... 7 6. TEST SYSTEM SPECIFICATIONS.................................................................................. 8 Automated Test System Specifications.......................................................................... 8 7. DOSIMETRIC ASSESSMENT & PHANTOM SPECS ........................................................... 9 Measurement Procedure............................................................................................. 9 Specific Anthropomorphic Mannequin (SAM) Specifications.............................................. 9 8. DEFINITION OF REFERENCE POINTS .......................................................................... 10 EAR Reference Point................................................................................................... 10 Handset Reference Points............................................................................................ 10 9. TEST CONFIGURATION POSITIONS ............................................................................. 11 Positioning for Cheek/Touch ........................................................................................ 11 Positioning for Ear /15° Tilt ......................................................................................... 12 Body Holster /Belt Clip Configurations .......................................................................... 13 10. ICNIRP GUIDELINES RF EXPOSURE LIMITS.................................................................. 14 Uncontrolled Environment ........................................................................................... 14 Controlled Environment........................................................................................ ....... 14 11. MEASUREMENT UNCERTAINTIES............................................................................... 15 SAR Measurement Uncertainties .................................................................................. 15 12. SYSTEM VERIFICATION........................................................................................... 16 Tissue Verification...................................................................................................... 16 Test System Verification.................................................................…

Text truncated - open the document above for the full version.

FCC ID:NPQFCS8900 Copyright ○ c 2005, DIGITAL EMC Co., Ltd. ATTACHMENT :SAR TEST PLOTS DIGITAL EMC CO., LTD DUT: FCS-8900; Type: CDMA single Band Communication System: FCC CDMA; Frequency: 824.7 MHz;Duty Cycle: 1:1 Medium parameters used: f = 824.7 MHz; σ = 0.907 mho/m; ε r = 40.2; ρ = 1000 kg/m 3 Phantom section: Left Section DASY4 Configuration: Probe: ET3DV6 - SN1703; ConvF(6.51, 6.51, 6.51); Calibrated: 2005-03-24; Electronics: DAE3 Sn520 Phantom: SAM with 835MHz; Type: SAM; Serial: TP-1223 Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Date: 2005-08-03; Ambient Temp: 23.0; Tissue Temp:21.5 Left Touch, CDMA Ch.1013, Ant Fixed, Standard Battery Area Scan (51x101x1): Measurement grid: dx=15mm, dy=15mm Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Power Drift = -0.365 dB Peak SAR (extrapolated) = 1.28 W/kg SAR(1 g) = 0.964 mW/g; SAR(10 g) = 0.686 mW/g 0 dB = 1.02mW/g DIGITAL EMC CO., LTD DUT: FCS-8900; Type: CDMA single Band Communication System: FCC CDMA; Frequency: 836.52 MHz;Duty Cycle: 1:1 Medium parameters used: f = 836.52 MHz; σ = 0.923 mho/m; ε r = 40; ρ = 1000 kg/m 3 Phantom section: Left Section DASY4 Configuration: Probe: ET3DV6 - SN1703; ConvF(6.51, 6.51, 6.51); Calibrated: 2005-03-24; Electronics: DAE3 Sn520 Phantom: SAM with 835MHz; Type: SAM; Serial: TP-1223 Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Date: 2005-08-03; Ambient Temp: 23.0; Tissue Temp:21.5 Left Touch, CDMA Ch.384, Ant Fixed, Standard Battery Area Scan (51x101x1): Measurement grid: dx=15mm, dy=15mm Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Power Drift = -0.136 dB Peak SAR (extrapolated) = 1.19 W/kg SAR(1 g) = 0.896 mW/g; SAR(10 g) = 0.636 mW/g 0 dB = 0.944mW/g DIGITAL EMC CO., LTD DUT: FCS-8900; Type: CDMA single Band Communication System: FCC CDMA; Frequency: 836.52 MHz;Duty Cycle: 1:1 Medium parameters used: f = 836.52 MHz; σ = 0.923 mho/m; ε r = 40; ρ = 1000 kg/m 3 Phantom section: Left Section DASY4 Configuration: Probe: ET3DV6 - SN1703; ConvF(6.51, 6.51, 6.51); Calibrated: 2005-03-24; Electronics: DAE3 Sn520 Phantom: SAM with 835MHz; Type: SAM; Serial: TP-1223 Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Date: 2005-08-03; Ambient Temp: 23.0; Tissue Temp:21.5 Left Touch, CDMA Ch.384, Ant Fixed, Standard Battery Area Scan (51x101x1): Measurement grid: dx=15mm, dy=15mm Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Power Drift = -0.136 dB Peak SAR (extrapolated) = 1.06 W/kg SAR(1 g) = 0.727 mW/g; SAR(10 g) = 0.487 mW/g 0 dB = 0.781mW/g DIGITAL EMC CO., LTD DUT: FCS-8900; Type: CDMA single Band Communication System: FCC CDMA; Frequency: 848.31 MHz;Duty Cycle: 1:1 Medium parameters used: f = 848.31 MHz; σ = 0.931 mho/m; ε r = 39.9; ρ = 1000 kg/m 3 Phantom section: Left Section DASY4 Configuration: Probe: ET3DV6 - SN1703; ConvF(6.51, 6.51, 6.51); Calibrated: 2005-03-24; Electronics: DAE3 Sn520 Phantom: SAM with 835MHz; Type: SAM; Serial: TP-1223 Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Date: 2005-08-03; Ambient Temp: 23.0; Tissue Temp:21.5 Left Touch, CDMA Ch.777, Ant Fixed, Standard Battery Area Scan (51x101x1): Measurement grid: dx=15mm, dy=15mm Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Power Drift = -0.259 dB Peak SAR (extrapolated) = 1.23 W/kg SAR(1 g) = 0.929 mW/g; SAR(10 g) = 0.660 mW/g 0 dB = 0.986mW/g DIGITAL EMC CO., LTD DUT: FCS-8900; Type: CDMA single Band Communication System: FCC CDMA; Frequency: 848.31 MHz;Duty Cycle: 1:1 Medium parameters used: f = 848.31 MHz; σ = 0.931 mho/m; ε r = 39.9; ρ = 1000 kg/m 3 Phantom section: Left Section DASY4 Configuration: Probe: ET3DV6 - SN1703; ConvF(6.51, 6.51, 6.51); Calibrated: 2005-03-24; Electronics: DAE3 Sn520 Phantom: SAM with 835MHz; Type: SAM; Serial: TP-1223 Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Date: 2005-08-03; Ambient Temp: 23.0; Tissue Temp:21.5 Left Touch, CDMA Ch.777, Ant Fixed, Standard Battery Area Scan (51x101x1): Measurement grid: dx=15mm, dy=15mm Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Power Drift = -0.259 dB Peak SAR (extrapolated) = 0.945 W/kg SAR(1 g) = 0.653 mW/g; SAR(10 g) = 0.447 mW/g 0 dB = 0.715mW/g DIGITAL EMC CO., LTD DUT: FCS-8900; Type: CDMA single Band Communication System: FCC CDMA; Frequency: 824.7 MHz;Duty Cycle: 1:1 Medium parameters used: f = 824.7 MHz; σ = 0.907 mho/m; ε r = 40.2; ρ = 1000 kg/m 3 Phantom section: Left Section DASY4 Configuration: Probe: ET3DV6 - SN1703; ConvF(6.51, 6.51, 6.51); Calibrated: 2005-03-24; Electronics: DAE3 Sn520 Phantom: SAM with 835MHz; Type: SAM; Serial: TP-1223 Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 145 Date: 2005-08-03; Ambient Temp: 23.0; Tissue Temp:21.5 Left Tilt, CDMA Ch.1013, Ant Fixed, Standard Battery Area Scan (51x111x1): Measurement grid: dx=15mm, dy=15mm Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Power Drift = -0.046 dB Peak SAR (extrapolate…

Text truncated - open the document above for the full version.