NUOUT-20NC01USB 2.0 PCI Card

Page 1 of 4 USB 2.0 PCI Card Introduction This 5 Port USB2.0 PCI Card is compliant with latest USB Spec Revision 2.0, i.e. support high-speed (480 Mbps), full-speed (12 Mbps) and low-speed (1.5 Mbps) data transaction rate. It is fully backward compatible with previous USB 1.1 products. You will enjoy the Hi-Speed that USB2.0 technology provides, particularly when you are operating the devices, which need mass data transmission, such as DV Camcorder, Digital camera...etc Features ü Compliant with USB Spec Revision 2.0 ü Compliant with Open Host Controller Interface Spec for USB Revision 1.0a ü All 5 downstream ports can handle high-speed (480 Mbps), full-speed (12 Mbps) and low-speed (1.5 Mbps) transaction ü 32-bits 33 MHz host interface compliant to PCI Spec release 2.2 ü Support PCI-Bus Power Management Interface Spec release 1.1 System Requirements ü Use with IBM PC compatible ü Recommended CPU speed at Pentium III or AMD-K7, RAM 128MB ü Operation System of MS Windows 2000 Professional and Windows XP* *Microsoft will release Windows XP Operation System to support USB 2.0 PCI Card in foreseeable future. Hardware Installation under Windows 2000 Professional 1. Turn the power off on your computer and disconnect the power cable 2. Open the computer case 3. Select an open PCI slot. Remove the cover plate for that slot. 4. Push the card into the slot 5. Attach the card’s bracket to the back of the computer with the screw to fix 6. Close the computer case 7. Connect the power cable and turn the power on Page 2 of 4 8. Windows 2000 Professional will detect an new USB device and run Add New Hardware Wizard, please insert alpha Driver (provided by Microsoft for USB-IF) 9. Follow the instructions and at final stage, push Finish button to complete installation. Device Manager - Windows 2000 Professional Once USB 2.0 PCI Card is being installed in the computer, , you will see the USB 2.0 PCI Card displaying in Device Manager of Windows 2000 Professional as follows Hardware Installation under Windows XP (Beta 2) 1. Same Procedures as above installation of Windows 2000 Professional 2. At procedures 8, please insert alpha Driver for Windows XP 3. Follow the instructions and at final stage, push Finish button to complete installation. Page 3 of 4 Device Manager - Windows XP (Beta2) Once USB 2.0 PCI Card is being installed in the computer, you will see the USB 2.0 PCI Card displaying in Device Manager of Windows XP (beta2) as follows Packing List ü The USB 2.0 PCI Card ü This Manual Update: July 9, 2001


  
                         !
                             !
                                         !"                   #                                           $ !  %      ! &! '            ! (!                      ! )!      *   %
+    !

      
           
  
 
 




  
 
 


 
  

   

 
 


    
 

 



 
   

 



  
  
  
  

 
     
 
        
    
               !
  "     #  $!    "   #   "    


 
 

  
  
  
  
  
  
  
  





 
 










 
 

 
 



 












 
  
 ! "#
 $

$

 

! "
! "
$

!
 

% 
$
$
$



 
 "  "
& 
 $
'$

! "
! "

!

#

%
$$ $

( )
* +
 
( )
*  +








   
REPORT NO:01E9589 DATE: July 13, 2001 FCC ID:NUOUT-20NC01 0 OF 15

   
 
 
  

 
           
   !"#$ %
                  . TABLE OF CONTENTS PAGE 1. VERIFICATION OF COMPLIANCE..............................................1 2. PRODUCT DESCRIPTION.....................................................2 3. TESTED SYSTEM DETAILS...................................................2 4. TEST FACILITY...........................................................2 5. ACCREDITATION AND LISTING...............................................3 6. MEASUREMENT INSTRUMENTATION.............................................3 7. MEASURING INSTRUMENT CALIBRATION........................................3 8. UNITS OF MEASUREMENT....................................................3 9. ANTENNAS................................................................4 10. CLASSIFICATION OF DIGITAL DEVICE........................................4 11. RADIATED EMISSION LIMITS................................................5 12. CONDUCTED EMISSION LIMITS...............................................5 13. CONDUCTED EMISSION TEST PROCEDURE.......................................6 14. RADIATED EMISSION TEST PROCEDURE........................................6 15. AMBIENT CONDITIONS......................................................7 16. SYSTEM TEST CONFIGURATION...............................................7 17. EQUIPMENT MODIFICATIONS.................................................7 18. EUT SETUP PHOTOS........................................................8 19. TEST EQUIPMENT LIST....................................................10 20. CORRECTION FACTOR......................................................11 21. TEST RESULT SUMMARY....................................................13 APPENDICES ..................................................................15 .EXTERNAL I/O CABLE CONSTRUCTION DESCRIPTION .CONFIGURATION BLOCK DIAGRAM .CONDUCTED EMISSION PLOT .RADIATED EMISSION DATA REPORT NO:01E9589 DATE: July 16, 2001 FCC ID:NUOUT-20NC01 1 OF 15

   
 
 
  

 
           
   !"#$ %
                  . $
& 

 




 
 










 
 

 
 




  
 






 
 



 
 


  

 !"!!#$!#


 

$!  #




  






  
%&'(
)
*+,
%&'(
# 
! #

& # '  #  
 & '          
   (   
    

 
  #

    %       
  
)( " %% '   *  

#
 #
    &    #        
 & +,-,+ ./ 0,1.2/3  -/+ 1/44,3.0         (5 6 !7 "  


       5 6 %7 " 
-.
*/01.
.2&345.+6
7*8
6.86.,
/(
054'3*+9.
+:3+..;3+:
.;139.8
+9
<0;
9054'3*+9.
736-
6-.
;.2&3;.5.+68
8.6
<0;6-
3+
6-.


=>

#
-.
;.8&'68
0<
6.863+:
3+
6-38
;.40;6
*44'(
60
6-.
4;0,&968(86.5
7-39-
7*8
6.86.,
0+'(
6-.;
8353'*;
.2&345.+6
73''
+06
+.9.88*;3'(
4;0,&9.
6-.
8*5.
;.8&'68
,&.
60
4;0,&9630+
60'.;*+9.
*+,
5.*8&;.5.+6
&+9.;6*3+63.8



 
   REPORT NO:01E9589 DATE: July 16, 2001 FCC ID:NUOUT-20NC01 2 OF 15

   
 
 
  

 
           
   !"#$ %
                  . 2. PRODUCT DESCRIPTION CHASSIS TYPE N/A LIST OF EACH OSC. OR XTAL. FREQ. (FREQ.>=1 MHz) Y1 = 30 MHz POWER REQUIREMENTS DC 3.3/5/12V INTERFACE PCI 3. TESTED SYSTEM DETAILS The Model names for all equipment, plus descriptions of all cables used in the tested system (including inserted cards) are: External Peripheral Devices Device Type Manufacturer Model Number Serial No. FCC ID / DoC HOST COMPUTER VIVA VIVA 686-350 HS-14 DoC KEYBOARD ACER 6311-TW4C/6 N/A DoC MONITOR COMPAQ MV925 940GA23TA097 DoC MODEM HAYES 231AA A25331083841 BFJ9D9308US MOUSE LOGITECH M-S34 LZE02353706 DZL211029 MOUSE LOGITECH M-BE58 LZA10752862 DoC MOUSE LOGITECH M-BE58 LZA10752880 DoC MOUSE LOGITECH M-BE58 LZA10752499 DoC MOUSE LOGITECH M-BE58 LZA10752403 DoC PRINTER HP 2225C 2550540697 BS46XU2225C 4. TEST FACILITY The open area test sites and conducted measurement facilities used to collect the radiated data are located at No. 199, Chung Sheng Road, Hsin Tien City, Taipei, Taiwan R.O.C. The sites are constructed in conformance with the requirements of ANSI C63.7, ANSI C63.4 and CISPR Publication 22. REPORT NO:01E9589 DATE: July 16, 2001 FCC ID:NUOUT-20NC01 3 OF 15

   
 
 
  

 
           
   !"#$ %
                  . 5. ACCREDITATION AND LISTING The test facilities used to perform radiated and conducted emissions tests are accredited by National Voluntary Laboratory Accreditation Program for the specific scope of accreditation under Lab Code:SL2-IN-E-0005 to perform Electromagnetic Int…

Text truncated - open the document above for the full version.

REPORT NO:01E9589 DATE: July 16, 2001 FCC ID:NUOUT-20NC01 8 OF 15

   
 
 
  

 
           
   !"#$ %
                  . 18. EUT SETUP PHOTOS Radiated Emission Setup Photos (Worst Emission Position) REPORT NO:01E9589 DATE: July 16, 2001 FCC ID:NUOUT-20NC01 9 OF 15

   
 
 
  

 
           
   !"#$ %
                  . Conducted Emission Setup Photos (Worst Emission Position)