O2OBTPCM101Bluetooth PCMCIA Card

Registergericht h registered in:Vorstand h Board of Directors:7 layers AG, Borsigstrasse 11 Ratingen, HRB 3264Dr. Wolfgang Dahm40880 Ratingen, Germany AufsichtsratsvorsitzendehDr. Hans-Jürgen MeckelburgPhone: +49 (0) 2102 749 0 Chairman of the Supervisory Board:Fax: +49 (0) 2102 749 350 Dr. Sabine Grobeckerwww.7Layers.com 14.08.2000 Phone +49 (0) 2102 749 306 Fax +49 (0) 2102 749 350 FCC-ID: O2OBTPCM101, 731 Confirmation number: EA97728 Correspondence Reference Number: 14842 Certification for the peripheral portion Dear Mr. Dichoso, please find enclosed the additional information required according to item 1 of your list of open items. Because the Digianswer PCMCIA card is a composite device, a computer peripheral (unintentional radiator) and a transmitter (intentional radiator), a certification for the peripheral portion (unintentional radiator) is also required. The documentation used for the certification of the transmitter is identical and can also be used for the peripheral portion too. The only difference is the test report according to Part 15 B which has been uploaded as a seperate file. Additionally, the label layout has been uploaded. The label will use the same FCC Grantee code as for the transmitter, because it has been submitted within the same filing process (731 confirmation number : EA97728). Thank you very much With kind regards 7 layers AG FCC Joe Dichoso Projektname: 3_DIGI_PCMCIA_01

PC-Card label: 31 32 33 34 35 3631 32 33 34 35 36 Made in Finland I.T.E. XXXX FCC ID: O2OBTPCM101CAN XXXXXXXX Type no.:BTPCM101 Bluetooth PC-Card Bluetooth PC-Card Type no.:BTPCM101 FCC ID: O2OBTPCM101CAN XXXXXXXX Made in Finland I.T.E. XXXX

EMC Measurement/Technical Report 4-F0003b/00 on 7 Layers AG Borsigstr. 11 40880 Ratingen Germany Note: The following test results relate only to the devices specified in this document. This report shall not be reproduced in parts without the written approval of the testing laboratory. Motorola Bluetooth PCMCIA Card BTPCM101 Registergericht - registered in: Ratingen, HRB 3264 Aufsichtratsvorsitzende - Chairman of the Supervisory Board: Dr. Sabine Grobecker Vorstand - Board of Directors: Dr. Wolfgang Dahm Dr. Hans-Jürgen Meckelburg 7 layers AG, Borsigstrasse 11 40880 Ratingen, Germany Phone: +49 (0) 2102 749 0 Fax: +49 (0) 2102 749 350 http://www.7Layers.com Report Reference: Table of Contents 0. Summary 0.1 Technical Report Summary 0.2 Measurement Summary 1. Administrative Data 1.1 Testing Laboratory 1.2 Project Data 1.3 Applicant Data 1.4 Manufacturer Data 3. Testobject Data 3.1 General EUT Description 3.2 EUT Main Components 3.3 Ancillary Equipment 3.4 EUT Setups 3.5 Operating Modes 4. Measurement Results 4.1 Conducted Emissions 9 5. Testequipment 6. Foto Report 7. Setup Drawings 3 3 4 5 5 5 5 5 7 7 8 8 8 8 9 15 17 21 4.2 Spurious Emissions Radiated 11 2. Product Labeling 2.1 FCC ID Label 2.2 Location of Label on the EUT 6 6 6 Page 2 of 21Testreport Reference: 4-F0003b/00 0 Summary 0.1 Technical Report Summary Type of Authorization Certification for an Unintentional Radiator (Class B digital device) Applicable FCC Rules: Prepared in accordance with the requirements of FCC Rules and Regulations as listed in 47 CFR Ch.1 Parts 0 to 19 (10-1-98 Edition). The following subparts are applicable to the results in this test report. Part 2, Subpart J - Equipment Authorization Procedures, Certification Sections Part 15, Subpart B - Unintentional Radiators § 15.101 Equipment authorization requirement § 15.107 Conducted Limits § 15.109 Radiated emission limits Summary Test Results: The EUT complied with all the applicable FCC rules as listed above. Page 3 of 21Testreport Reference: 4-F0003b/00 0.2 Measurement Summary § 15.107FCC Part 15, Subpart B ANSI C63.41992 The measurement was performed according to Conducted Emissions (AC Power Line)Conducted Emissions (AC Power Line) OP-ModeOP-ModeSetupSetupPortPortFinal ResultFinal Result setup 1op-mode 1enclosurepassed setup 1op-mode 3enclosurepassed § 15.109FCC Part 15, Subpart B ANSI C63.41992 The measurement was performed according to Spurious Radiated EmissionsSpurious Radiated Emissions OP-ModeOP-ModeSetupSetupPortPortFinal ResultFinal Result setup 2op-mode 1enclosurepassed setup 2op-mode 2enclosurepassed setup 2op-mode 3enclosurepassed Responsible for Accreditation Scope: Responsible for Test Report: Page 4 of 21Testreport Reference: 4-F0003b/00 1. Administrative Data 1.1 Testing Laboratory Company Name: Address: The test facility is also accredited by the following accreditation organisation: Responsible for Accreditation Scope: 7 Layers AG Borsigstr. 11 40880 Ratingen Germany DAR-Registration no. TTI-P-G 178/99-10 Dipl.-Ing Bernhard Retka Dipl.-Ing Arndt Stöcker This facility has been fully described in a report submitted to the FCC and accepted in a letter dated February 07, 2000 under the registration number 96716 . - Deutscher Akkreditierungs Rat - Regulierungsbehörde für Telekommunikation und Post (Reg TP) 25.04.00 Marco Kullik 14.08.00 25.04. - 12.05.00 10 Project Leader: Receipt of EUT: Date of Test(s): Date of Report: No. of Pages in Annex: 1.2 Project Data Digianswer A/S Tom Ringtved Skalhuse 5 DK-9240 Nibe Denmark Eloqtec Network Corporation Teemu Melin Lohja Plants - Gunnarlankatu FIN-08101 Lohja Finland P.O.Box 47 1.4 Manufacturer Data Company Name: Address: Contact Person: Company Name: Address: Contact Person: 1.3 Applicant Data Page 5 of 21Testreport Reference: 4-F0003b/00 2.0 Product Labeling 2.1 FCC ID Label: All devices authorized under the certification procedures are required todisplay an identification label showing the FCC identifier (FCC ID) under which they are authorized. 2.2 Location of Label on the EUT: The label shall be located in a conspiciuous place on the device consistent with the requirements of section 15.19 of FCC CFR 47. For this device it will be the topside. Page 6 of 21Testreport Reference: 4-F0003b/00 3. Testobject Data Type Designation: Kind of Device: (optional) Voltage Type: Voltage level: Equipment under Test: BTPCM101 Motorola Bluetooth PCMCIA Card DC 5,0 V Ports 2.1 General EUT Description General product description: Bluetooth is a short-range radio link intended to be a cable replacement between portable and/or fixed electronic devices. Bluetooth operates in the unlicensed ISM Band at 2.4 GHz. In the US a band of 83.5 MHz width is available. In this band, 79 RF channels spaced 1MHz apart a defined. The channel is represented by a pseudo-random hopping sequence through the 79 channels. The channel is devided into time slots, with a nominal slot length of 625μs, where each slot corresponds to different RF hop frequencies. The nominal hop rate is 1600 hops/s. All frequencies are equally used. The average time of occupancy is 0.3797 s within a 30 second period. The symbol rate on the channel is 1 Ms/s. The maximum output power, including antenna gain, is 18 dBm. The EUT provides the following ports: AC Mains Port (via Laptop) Antenna Port Enclosure The main components of EUT are listed and described in Chapter 2.2 Page 7 of 21Testreport Reference: 4-F0003b/00 Short Description Equipment under Test Type Designation 2.2 EUT Main components: Type, S/N, Short Descriptions etc. used in this Test Report HW StatusSW StatusSerial No.Date of Receipt DIG8044240 PC Card Firmware - release 1.00 00003A25.04.00 BTPCM101Bluetooth PCMCIA Card EUT A This EUT was equipped with a temporary antenna port. DIG8044240 PC Card Firmware - release 1.00 00003E25.04.00 BTPCM101Bluetooth PCMCIA Card EUT B This EUT is equipped witht two integral antennas. One patch antenna and one PCB antenna. The PCB antenna has a maximum gain of 2.52…

Text truncated - open the document above for the full version.

EMC Measurement/Technical Report 4-F0003c/00 on 7 Layers AG Borsigstr. 11 40880 Ratingen Germany Note: The following test results relate only to the devices specified in this document. This report shall not be reproduced in parts without the written approval of the testing laboratory. Motorola Bluetooth PCMCIA Card BTPCM101 Registergericht - registered in: Ratingen, HRB 3264 Aufsichtratsvorsitzende - Chairman of the Supervisory Board: Dr. Sabine Grobecker Vorstand - Board of Directors: Dr. Wolfgang Dahm Dr. Hans-Jürgen Meckelburg 7 layers AG, Borsigstrasse 11 40880 Ratingen, Germany Phone: +49 (0) 2102 749 0 Fax: +49 (0) 2102 749 350 http://www.7Layers.com Report Reference: Table of Contents 0. Summary 0.1 Technical Report Summary 0.2 Measurement Summary 1. Administrative Data 1.1 Testing Laboratory 1.2 Project Data 1.3 Applicant Data 1.4 Manufacturer Data 3. Testobject Data 3.1 General EUT Description 3.2 EUT Main Components 3.3 Ancillary Equipment 3.4 EUT Setups 3.5 Operating Modes 4. Test Results 4.1 Conducted Emissions 5. Testequipment 6. Foto Report 3 3 4 5 5 5 5 5 7 7 8 8 8 8 9 9 14 16 4.5 Spurious Emissions Radiated 11 2. Product Labeling 2.1 FCC ID Label 2.2 Location of Label on the EUT 6 6 6 Page 2 of 18 Testreport Reference: 4-F0003c/00 0 Summary 0.1 Technical Report Summary Type of Authorization Certification for an Unintentional Radiator (Class B digital device) Applicable FCC Rules: Prepared in accordance with the requirements of FCC Rules and Regulations as listed in 47 CFR Ch.1 Parts 0 to 19 (10-1-98 Edition). The following subparts are applicable to the results in this test report. Part 2, Subpart J - Equipment Authorization Procedures, Certification Sections Part 15, Subpart B - Unintentional Radiators § 15.101 Equipment authorization requirement § 15.107 Conducted limits § 15.109 Radiated emission limits Summary Test Results: The EUT complied with all the applicable FCC rules as listed above. Page 3 of 18Testreport Reference: 4-F0003c/00 0.2 Measurement Summary § 15.207FCC Part 15, Subpart C ANSI C63.4 1992 The measurement was performed according to Conducted Emissions (AC Power Line)Conducted Emissions (AC Power Line) OP-ModeOP-Mode SetupSetup PortPort Final ResultFinal Result setup 1op-mode 1 AC mains (via Laptop) passed § 15.247 (c), §15.35 (b), § 15.209FCC Part 15, Subpart C ANSI C63.4 1992 The measurement was performed according to Spurious Radiated EmissionsSpurious Radiated Emissions OP-ModeOP-Mode SetupSetup PortPort Final ResultFinal Result setup 1op-mode 1 enclosure passed Responsible for Accreditation Scope: Responsible for Test Report: Page 4 of 18Testreport Reference: 4-F0003c/00 1. Administrative Data 1.1 Testing Laboratory Company Name: Address: The test facility is also accredited by the following accreditation organisation: Responsible for Accreditation Scope: 7 Layers AG Borsigstr. 11 40880 Ratingen Germany DAR-Registration no. TTI-P-G 178/99-10 Dipl.-Ing Bernhard Retka Dipl.-Ing Arndt Stöcker This facility has been fully described in a report submitted to the FCC and accepted in a letter dated February 07, 2000 under the registration number 96716 . - Deutscher Akkreditierungs Rat - Regulierungsbehörde für Telekommunikation und Post (Reg TP) 25.04.00 Marco Kullik 12.09.00 11.09.00 Project Leader: Receipt of EUT: Date of Test(s): Date of Report: No. of Pages in Annex: 1.2 Project Data Digianswer A/S Tom Ringtved Skalhuse 5 DK-9240 Nibe Denmark Eloqtec Network Corporation Teemu Melin Lohja Plants - Gunnarlankatu FIN-08101 Lohja Finland 47 1.4 Manufacturer Data Company Name: Address: Contact Person: Company Name: Address: Contact Person: 1.3 Applicant Data Page 5 of 18Testreport Reference: 4-F0003c/00 2.0 Product Labeling 2.1 FCC ID Label: All devices authorized under the certification procedures are required todisplay an identification label showing the FCC identifier (FCC ID) under which they are authorized. An updated label has been submitted separately. 2.2 Location of Label on the EUT: The label shall be located in a conspiciuous place on the device consistent with the requirements of section 15.19 of FCC CFR 47. For this device it will be the topside. Page 6 of 18Testreport Reference: 4-F0003c/00 3. Testobject Data Type Designation: Kind of Device: (optional) Voltage Type: Voltage level: Equipment under Test: BTPCM101 Motorola Bluetooth PCMCIA Card DC 5,0 Ports 3.1 General EUT Description General product description: Bluetooth is a short-range radio link intended to be a cable replacement between portable and/or fixed electronic devices. Bluetooth operates in the unlicensed ISM Band at 2.4 GHz. In the US a band of 83.5 MHz width is available. In this band, 79 RF channels spaced 1MHz apart a defined. The channel is represented by a pseudo-random hopping sequence through the 79 channels. The channel is devided into time slots, with a nominal slot length of 625μs, where each slot corresponds to different RF hop frequencies. The nominal hop rate is 1600 hops/s. All frequencies are equally used. The average time of occupancy is 0.3797 s within a 30 second period. The symbol rate on the channel is 1 Ms/s. The maximum output power, including antenna gain, is 23 dBm. The EUT provides the following ports: AC mains (via Laptop); Enclosure The main components of EUT are listed and described in Chapter 2.2 Page 7 of 18Testreport Reference: 4-F0003c/00 Short Description Equipment under Test Type Designation 3.2 EUT Main components: Type, S/N, Short Descriptions etc. used in this Test Report HW Status SW StatusSerial No. Date of Receipt DIG8044240 PC Card Firmware - release 1.00 00003A 25.04.00 BTPCM101Bluetooth PCMCIA Card EUT A NOTE: The short description is used to simplify the identification of the EUT in this test report 3.3 Ancillary Equipment Short Description Equipment under TestType Designation HW Status SW Status Serial No. FCC Id For the purposes of this test report, ancillary equipment is defined as equipment which is used in conjunction with the EUT …

Text truncated - open the document above for the full version.