O3M9290002579XLED Lamp

Please go to www.meethue.com to learn more about hue and how to use it. FCC ID bridge: EW780891300 FCC ID lamp: O3M9290002265X This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. • Risk of electric shock – Do not use device where directly exposed to water. • Before replacing, turn off power and let the bulb cool to avoid electrical shock or burn. • The device is for indoor use only. • Do not use the device in wet locations, e.g. bathrooms or outdoors. OPERATING INSTRUCTIONS: • This device is not a toy designed to be played with by children. • Do not place the device on hot surfaces. • For safety reasons, do not open device, which will also void the warranty. • Only use the adaptor supplied; using a different adaptor can damage the device. IC Certication: - LED lamp: company number: 10469A, UPN: 2265X. - ZigBee IP bridge: company number: 1135B, UPN: 80891300. This Class B digital apparatus complies with Canadian ICES-003. This digital apparatus does not exceed the class B limits for radio-noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications. NOTICE: Changes or modications made to this device not expressly approved by Philips Lighting Company (USA) and Philips Electronics Ltd (Canada) (collectively “Philips”) may void the U.S. FCC and Canadian authorization to operate this device. The advanced interface module complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modica- tions to this equipment. Such modications could void the user's authority to operate the equipment. This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna – Increase the separation between the device and receiver – Connect the device into an outlet on a circuit different from that to which the receiver is connected – Consult the dealer or an experienced radio/television technician for help WARNINGS AND CAUTIONS: • The bulb is suitable for use in open luminaries (xtures). • The bulb is not suitable for totally enclosed fixtures. • The bulb is not intended for use with emergency exit xtures or emergency lights. • The bulb is not compatible with photo controls, occupancy sensors, or timing devices unless specically designed for hue. • The bulb is not suitable for use with dimmers. • The bulb is not suitable for use with dimmers. misuse or acts of God. REPLACEMENT OR REFUND IS YOUR SOLE REMEDY. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES ARE LIMITED IN DURA- TION TO THE DURATION OF THIS WARRANTY. LIABILITY FOR INCIDENTAL OR CONSEQUEN- TIAL DAMAGES IS HEREBY EXPRESSLY EXCLUDED. Some states and provinces do not allow exclusion of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specic legal rights, and you may also have other rights which vary from state to state and province to province. CLEANING AND MAINTENANCE: Do not clean the device when it is on and connected to the power supply. To avoid scratching the device, clean only with a soft dry cloth. Do not use cleaning agents to clean the device. Manage in accordance with disposal laws in your area. “Hue Personal Wireless Lighting” is a trademark owned by Koninklijke Philips Electronics N.V. Wireless Specication: Wireless RF mode frequency band: 2400~2483.5 MHz Wireless communications protocol: IEEE 802.15.4 Operating channels: channels 11 – 26 Environmental specication: Temperature (operation): 0-35 °C Temperature (Storage): -25-60 °C Relative humidity: 5-95 % non condensing Standby power: 0.45 W per lamp • Use the bulb only in a socket rated for this bulb. LIMITED WARRANTY: Philips warrants that this device will be free from defects in material and workmanship and will operate for 2 years based on up to 3 hours average usage per day/7 days per week, when used as directed. If this device does not conform to the warranty, Philips will send you, at its election, a replacement device or refund your original purchase price upon receipt of the returned device, register receipt and proof of purchase. Please call our toll-free number 1-800-555-0050, write to Philips (address indicated on the packaging) or send an email at the website www.philips.com to nd out how to return the device. This limited warranty does not cover devices subject to accident, neglect, abuse, EN FR Pour en savoir plus sur le système hue et son utilisation, visitez le site www.meethue.com. ID FCC de la passerelle: EW780891300 ID FCC de l’ampoule: O3M9290002265X Cet appareil est conforme à l'alinéa 15 de la réglementation de la FCC et à la norme CNR-210 d'Industrie Canada. Son fonctionnement est assujetti aux deux conditions suivantes : (1) l'appareil ne doit pas causer d'inte…

Text truncated - open the document above for the full version.

         !    "##"$#" %&'$(#$()#('*' + ,%&'$(#$-))-#-(" ./01/234456748695:;/93:<=:3>4  %?("#*$'$ !@AB % C  DE@C%???? F*("""(-GH????
@@ +)G+")-G ")-  !
$#""!  #"  E@   C @AB +   A  C   I>J/46548695:;/93:<=:3>4./01/23/;4 KLM:N:34 !
   O P   ! Q, 
 !
  R (  
 !
   F    SDCF  !
  
T
  SOF !
   @ $U
 @ !
   !    ! !@
 !
  R UV @  R%?????? Q,    D ?????? ????? ?4WM:=:J24X8M:9<Y4Z9[/23\/93486]^_3;]4````?  @A  CC   @    CCCP   @D  @AB  C   D  Aa  ab@      D   AD  @    C b@ C    W/7\<9/9348695:;/93:<=:3>c4   E@,A A    D  C  A  DbC@A  b@           D C   @ D @A  dM673eI/7\48695:;/93:<=:3>c4   E@,A  A    C  AbC@A bC C??? #" ??? DC Cf CQE@ g@h   P   @ C   C   P  C@ @A g    b  D  A CDgO    C    @ @     A@A gOb   @  A C@A  @@@  +
@A  g")$#G"- ijIK45674Z9;1237>48<9<;<4kJJ=:l<3:692c4   @   @ @    @Ab ! 
    C  DDC P,A A bDA P C  b @A  ! D OD% ?????????????????????????? ?@ ?? ?????? ! @S * 
   ( $ PR E@C@B@C  AC    C  DbA b  @ D E@ bAD+@ 
$O@$gP DAC @   D  C   +@B@C  @A   A F @ , C   b@A%m QU+Un@   $ A,DA    C    @  A       @D! ,A @   AC  C o pqqrsstutvt t

FCC ID: O3M9290002579X Page 1 of 2 Audix Technology (Wujiang )Co., Ltd. EMC Dept. Report No.: ACWE-F1306002 Figure 1 General Appearance (Front Side View) Figure 2 General Appearance (Bottom View) FCC ID: O3M9290002579X Page 2 of 2 Audix Technology (Wujiang )Co., Ltd. EMC Dept. Report No.: ACWE-F1306002 Figure 3 General Appearance (Label) Figure 4 General Appearance (Label/ Brand)

hue BR30 8W 150mA 110-130Vac 50/60Hz FCC ID: O3M9290002579X IC:10469A-2579X Notam BR30 COLOR: PANTONE DARK GREY 433U 20mm Font size: 1.3mm height Font size: 1.3mm height Model: 9290002579A3Date Code Factory Mark this is a custom laser mark and the heat sink manufacturer should not print it on the heat sink 13mm 6mm Made in China Font size: 1.5mm height Serial No.: ABC123 laser mark 距离上下高度5mm Should be centered on the back 需要更新 5mm 5mm 字体至少8号字 630 Lumens

FCC ID: O3M9290002579X Page 1 of 3 Audix Technology (Wujiang )Co., Ltd. EMC Dept. Report No.: ACWE-F1306002 Figure 1 Internal View Figure 2 Power Board (Component Side) FCC ID: O3M9290002579X Page 2 of 3 Audix Technology (Wujiang )Co., Ltd. EMC Dept. Report No.: ACWE-F1306002 Figure 3 Power Board (Solder Side) Figure 4 Wireless Board (Component Side) Ant. FCC ID: O3M9290002579X Page 3 of 3 Audix Technology (Wujiang )Co., Ltd. EMC Dept. Report No.: ACWE-F1306002 Figure 5 Wireless Board (Solder Side) Figure 6 LED Board

FCC ID: O3M9290002579X Page 1 of 7 Audix Technology (Wujiang )Co., Ltd. EMC Dept. Report No.: ACWE-F1306006 APPLICATION FOR CERTIFICATION On Behalf of Philips (China) Investment Co., Ltd. LED Lamp Model No. : 9290002579 Brand : Philips FCC ID : O3M9290002579X Prepared for Philips (China) Investment Co., Ltd. No. 9, Lane 888, Tian Lin Road, 200233, Shanghai, China Prepared by Audix Technology (Wujiang) Co., Ltd. EMC Dept. No. 1289 Jiangxing East Road, the Part of Wujiang Economic Development Zone Jiangsu China 215200 Tel : +86-512-63403993 Fax :+86-512-63403339 Report Number ACWE-F1306006 Date of Test Jun.08, 2013 Date of Report Jun.18, 2013 FCC ID: O3M9290002579X Page 2 of 7 Audix Technology (Wujiang )Co., Ltd. EMC Dept. Report No.: ACWE-F1306006 TABLE OF CONTENTS Description Page TEST REPORT CERTIFICATION .......................................................................................................4 1. GENERAL INFORMATION.......................................................................................................4 1.1. Description of Device (EUT).................................................................................................................. 4 1.2. Description of Test Facility .................................................................................................................... 5 1.3. Measurement Uncertainty....................................................................................................................... 5 2. SUMMARY OF STADARDS AND RESULTS ..........................................................................6 2.1. Applicable Standard................................................................................................................................ 6 2.2. Specification Limits ................................................................................................................................ 6 2.3. MPE Calculator Method ......................................................................................................................... 6 2.4. Calculated Result .................................................................................................................................... 7 FCC ID: O3M9290002579X Page 4 of 7 Audix Technology (Wujiang )Co., Ltd. EMC Dept. Report No.: ACWE-F1306006 1. GENERAL INFORMATION 1.1. Description of Device (EUT) Description : LED Lamp Model No. : 9290002579 FCC ID : O3M9290002579X Brand : Philips Applicant : Philips (China) Investment Co., Ltd. No. 9, Lane 888, Tian Lin Road, 200233, Shanghai, China Manufacturer : Philips (China) Investment Co., Ltd. No. 9, Lane 888, Tian Lin Road, 200233, Shanghai, China Factory #1 : Changan Win Channel Electronics Company Limited No.85, Tong Gu Xia Lu, Shangjiao Community, Changan Town, Dongguan City, Guangdong Province, China Factory #2 : Arts Electronics Co., Ltd. Shangxing Lu, Shangjiao Community, Changan Town, Dongguan Guangdong523000 China Radio Technology : IEEE 802.15.4 (ZigBee®) Antenna Gain : -6dBi Fundamental Range : 2405 MHz -2480MHz Tested Frequency : 2405MHz (CH11) 2450MHz (CH20) 2480MHz (CH26) Highest Working Frequency : 2.4GHz Date of Receipt of Sample : May 09, 2013 Date of Test : Jun.08, 2013 FCC ID: O3M9290002579X Page 5 of 7 Audix Technology (Wujiang )Co., Ltd. EMC Dept. Report No.: ACWE-F1306006 1.2. Description of Test Facility Name of Firm Audix Technology (Wujiang) Co., Ltd. EMC Dept. Site Location No. 1289 Jiangxing East Road, the Eastern Part of Wujiang Economic Development Zone Jiangsu China 215200 Test Facilities RF Fully Chamber NVLAP Lab Code 200786-0 (NVLAP is a NATA accredited body under Mutual Recognition Agreement) Valid until on Sep.30, 2013 1.3. Measurement Uncertainty Test Item Uncertainty Maximum Peak Output Power ± 0.30dB Remark: Uncertainty = ku c (y) FCC ID: O3M9290002579X Page 6 of 7 Audix Technology (Wujiang )Co., Ltd. EMC Dept. Report No.: ACWE-F1306006 2. SUMMARY OF STADARDS AND RESULTS 2.1. Applicable Standard FCC OET Bulletin 65:1997 2.2. Specification Limits Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm 2 ) Averaging Time |E| 2 , |H| 2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f2)* 30 30-300 27.5 0.073 0.2 30 300-1500 -- -- f/150 30 1500-100,000 -- -- 1.0 30 f = frequency in MHz *Plane-wave equivalent power density NOTE: General population/uncontrolled exposures apply in situations in which the general public may be exposed, or in which persons that are exposed as a consequence of their employment may not be fully aware of the potential for exposure or can not exercise control over their exposure. The limit value 1.0mW/cm 2 is available for this EUT. 2.3. MPE Calculator Method S = PG/(4R 2 R = [PG/(4 where: S = power density (in appropriate units, e.g. mW/ cm 2 ) P = power input to the antenna (in appropriate units, e.g., mW) (the measured power value see Report: F12124 Section 6.6) G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna (appropriate units, e.g., cm) FCC ID: O3M9290002579X Page 7 of 7 Audix Technology (Wujiang )Co., Ltd. EMC Dept. Report No.: ACWE-F1306006 2.4. Calculated Result Radio Frequency Radiation Exposure Evaluation Frequency Output Power to Antenna Antenna Gain Power Density Limit (MHz) (mW) (dBi) (Numeric) (mW/cm 2 )(mW/cm 2 ) 2405 1.97 -6 0.250.000098 1. 2450 1.73 -6 0.25 0.000086 1. 2480 1.61 -6 0.25 0.000080 1. Frequency Output Power to Antenna Antenna Gain Limit Distance (MHz) (mW) (dBi) (Numeric) (mW/cm 2 ) (cm ) 2405 1.97 -6 0.25 1.0 0.198 2450 1.73 -6 0.25 1.0 0.186 2480 1.61 -6 0.25 1.0 0.179 The antenna used for this transmitter must be installed to provide a separation distance of at least 0.198cm from all persons

FCC ID: O3M9290002579X Page 1 of 54 Audix Technology (Wujiang )Co., Ltd. EMC Dept. Report No.: ACWE-F1306002 APPLICATION FOR CERTIFICATION On Behalf of Philips (China) Investment Co., Ltd. LED Lamp Model No. : 9290002579 Brand : Philips FCC ID : O3M9290002579X Prepared for Philips (China) Investment Co., Ltd. No. 9, Lane 888, Tian Lin Road, 200233, Shanghai, China Prepared by Audix Technology (Wujiang) Co., Ltd. EMC Dept. No. 1289 Jiangxing East Road, the Part of Wujiang Economic Development Zone Jiangsu China 215200 Tel : +86-512-63403993 Fax :+86-512-63403339 Report Number ACWE-F1306002 Date of Test Jun.07~08, 2013 Date of Report Jun.13, 2013 FCC ID: O3M9290002579X Page 2 of 54 Audix Technology (Wujiang )Co., Ltd. EMC Dept. Report No.: ACWE-F1306002 TABLE OF CONTENTS Description Page TEST REPORT CERTIFICATION .......................................................................................................4 1. SUMMARY OF MEASUREMENTS AND RESULTS .............................................................5 2. GENERAL INFORMATION.......................................................................................................6 2.1. Description of Device (EUT).................................................................................................................. 6 2.2. Description of Test Facility .................................................................................................................... 7 2.3. Measurement Uncertainty....................................................................................................................... 7 3. CONDUCTED EMISSION MEASUREMET ............................................................................8 3.1. Test Equipment ....................................................................................................................................... 8 3.2. Block Diagram of Test Setup.................................................................................................................. 8 3.3. Power line Conducted Emission Limit ................................................................................................... 8 3.4. Test Procedure ........................................................................................................................................ 9 3.5. Conducted Emission Measurement Results............................................................................................ 9 4. RADIATED EMISSION MEASUREMENT ............................................................................16 4.1. Test Equipment ..................................................................................................................................... 16 4.2. Block Diagram of Test Setup................................................................................................................ 16 4.3. Radiated Emission Limits ..................................................................................................................... 17 4.4. Test Procedure ...................................................................................................................................... 18 4.5. Measurement Results ............................................................................................................................ 19 4.6. Restricted Bands Measurement Results (For Below 1GHz)................................................................. 20 4.7. Restricted Bands Measurement Results (For Above 1GHz) ................................................................ 23 4.8. Spurious Emission Measurement Results in Band Edge Emission (FCC Part 15, 15.205).................. 26 5. 6 DB BANDWIDTH MEASUREMENT ...................................................................................34 5.1. Test Equipment ..................................................................................................................................... 34 5.2. Block Diagram of Test Setup................................................................................................................ 34 5.3. Specification Limits (§15.247(a)(2)) .................................................................................................... 34 5.4. Test Procedure ...................................................................................................................................... 34 5.5. Test Results........................................................................................................................................... 34 6. MAXIMUM PEAK OUTPUT POWER MEASUREMENT ...................................................37 6.1. Test Equipment ..................................................................................................................................... 37 6.2. Block Diagram of Test Setup................................................................................................................ 37 6.3. Specification Limits (§15.247(b)(3)) .................................................................................................... 37 6.4. Test Procedure ...................................................................................................................................... 37 6.5. Test Results........................................................................................................................................... 37 7. BAND EDGES MEASUREMENT ............................................................................................38 7.1. Test Equipment ..................................................................................................................................... 38 7.2. Block Diagram of Test Setup................................................................................................................ 38 7.3. Specification Limits (§15.247(d))...............................................................................…

Text truncated - open the document above for the full version.

FCC ID: O3M9290002579X Page 1 of 3 Audix Technology (Wujiang) Co., Ltd. EMC Dept. Report No.: ACWE-F1306002 1. PHOTOGRAPHS OF MEASUREMENT 1.1. Photos of Conducted Disturbance Measurement Front View of Conducted Disturbance Measurement Side View of Conducted Disturbance Measurement FCC ID: O3M9290002579X Page 2 of 3 Audix Technology (Wujiang) Co., Ltd. EMC Dept. Report No.: ACWE-F1306002 1.2. Radiated Disturbance Measurement Below 1GHz Above 1GHz FCC ID: O3M9290002579X Page 3 of 3 Audix Technology (Wujiang) Co., Ltd. EMC Dept. Report No.: ACWE-F1306002 1.3. Measurement for section 5/6/7/8/9/10