O3W200000PDA With 802.11b WLAN

Handbook for Palm™ Tungsten™ C Handhelds Copyright © 2002 Palm, Inc. All rights reserved. The Palm logo, HotSync, MultiMail, PalmModem, and Palm OS are registered trademarks, and the HotSync logo, Palm, Palm Powered, Tungsten, and VersaMail are trademarks of Palm, Inc. Palm, Inc. uses the Bluetooth trademark under express license from Bluetooth SIG, Inc., U.S.A. All other brands are trademarks or registered trademarks of their respective owners. Disclaimer and Limitation of Liability Palm, Inc. assumes no responsibility for any damage or loss resulting from the use of this handbook. Palm assumes no responsibility for any loss or claims by third parties which may arise through the use of this software. Palm, Inc. assumes no responsibility for any damage or loss caused by deletion of data as a result of malfunction, dead battery, or repairs. Be sure to make backup copies of all important data on other media to protect against data loss. IMPORTANTPlease read the End User Software License Agreement with this product before using the accompanying software program(s). Using any part of the software indicates that you accept the terms of the End User Software License Agreement. Software Download Available Palm™ Desktop software is supplied on a CD-ROM disc. If you do not have access to a CD-ROM drive for your computer, you can download the Palm Desktop software from www.palm.com/support/. PN: 407-4891A-US iii About This Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Chapter 1: Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Minimum requirements: Windows computers . . . . . . . . . . . . . . . . . . . . . . . . 4 Minimum requirements: Mac computers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Finding information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Chapter 2: Exploring Your Handheld . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Locating handheld components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Locating front panel controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Locating back panel components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Adding an expansion card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Adjusting the screen brightness level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Chapter 3: Navigating and Entering Data . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Tapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Using the navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Using the keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Typing capital letters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Accessing international and special characters . . . . . . . . . . . . . . . . . . . . . . . 16 Using the Function key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Using ShortCuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Using elements of the handheld interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Using Graffiti writing to enter data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Graffiti tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Graffiti alphabet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Capital letters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Graffiti numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Punctuation marks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Symbol characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Accented characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Additional non-English characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Navigation strokes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Contents Contents iv Graffiti ShortCuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Beaming data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Using your computer keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Importing data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Importing data from a Windows computer . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Importing data from a Mac computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Chapter 4: Working with Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Opening applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Other ways to open applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Opening expansion card applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Switchin…

Text truncated - open the document above for the full version.

Dec 12, 2002 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Re: Request for Confidentiality In reference to the application under FCC ID: O3W200000, and pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission's Rules, the Applicant hereby requests confidential treatment of the accompanying information as outlined below: Document titled "TungstenC system block diagram", total 1 page. Document titled "TungstenC circuit diagram”, total 10 pages. Document titled "TungstenC bill of material”, total 1 page. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, David Woo Manager – Global Compliance

From: Steve Cheng Sent: Friday, April 18, 2003 4:54 PM To: Mike Kuo Subject: RE: PALM INC., FCC ID:O3W200000, AN02T2479 Hi Mike : Reply to Question #1:We have discussed the output power issue. The spec. output power for this device shall be 50mW. The output power reported in EMC test report are not correct. The output power has been remeasured with peak power meter. The highest output power measured is 16.78dBm. Attached please revised peak output power data. Reply to Question #2: Confirmed with the applicant. There will not body worn accessory provided by the applicant. Regulatory information has been revised. Attached please find revised regulatory information sheet. Reply to Question #3: AC line conducted emission tests have been measured with CISPR 22 limits from 150kHz to 30MHz. Attahced please find additional AC line conducted data. Best Regards Steve cheng Subject: PALM INC., FCC ID:O3W200000, AN02T2479 Notice_content ------------- Question #1: The output power listed in the EMC test report with highest output power of 14.09dBm. The highest output power reported in the SAR report is 16.81dBm. Please explain the differences. Question #2: The user manual mentioned body worn accessory. Please provide the photos of body worn accessory. Question #3: The AC line conducted emission was measured from 450k-30MHz. Per FCC Docket 98-80, the AC line conducted emission shall be measured from 150k- 30MHz based upon CISPR 22 technical limits in order to avoid the following grant note: 05" NOTE- The manufacture and importation of this device must cease on July 10, 2005 pursuant to 15.37(j) or 18.123 transition provisions adopted under FCC 02- 157 (ET Docket 98-80). Best Regards Mike Kuo The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information within 60 days of the original e-mail date may result in application dismissal and forfeiture of the filing fee. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the e-mail address listed below the name of the sender.

03 Artwork Notes: (Unless otherwise specified) 1) PAD PRINTED OUTLINE DOES NOT PRINT, FOR REFERENCE ONLY. 2) LOCATION DIMENSIONS PROVIDED ON ASSEMBLY PRINT. 01prelim art for EVT1 prelim art for EVT2 Part #: 400-4623A xxxx07/07/02 02xxxx08/09/02 added FCC approvals 03xxxx10/24/02 A/W, HSG, BTM, Montana COLOR: PANTONE 432c 1.6 mm (+/- 0.1mm) 1.6 mm (+/- 0.1mm) 4.8 mm (+/- 0.1 mm) 4.8 mm (+/- 0.1 mm)

IEEE Std 802-2001 ® (Revision of IEEE Std 802-1990™) I EEE Standards 802 ® IEEE Standard for Local and Metropolitan Area Networks: Overview and Architecture Published by The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA 7 February 2002 IEEE Computer Society Sponsored by the LAN/MAN Standards Committee IEEE Standards Print: SH94947 PDF: SS94947 The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright © 2002 by the Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 7 February 2002. Printed in the United States of America. Print:ISBN 0-7381-2940-2SH94947 PDF:ISBN 0-7381-2941-0SS94947 No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. IEEE Std 802-2001 ® (Revision of IEEE Std 802-1990) IEEE Standard for Local and Metropolitan Area Networks: Overview and Architecture Sponsor LAN/MAN Standards Committee of the IEEE Computer Society Approved 6 December 2001 IEEE-SA Standards Board Abstract:IEEE Std 802-2001 ® , IEEE Standards for Local and Metropolitan Area Networks: Overview and Architecture, provides an overview to the family of IEEE 802 ® Standards. It defines compliance with the family of IEEE 802 ® Standards; it describes the relationship of the IEEE 802 ® Standards to the Open Systems Interconnection Basic Reference Model [ISO/IEC 7498-1:1994] and explains the relationship of these standards to the higher layer protocols; it provides a standard for the structure of LAN MAC addresses; and it provides a standard for identification of public, private, and standard protocols. Keywords:IEEE 802 ® standards compliance, Local Area Networks (LANs), LAN/MAN architecture, LAN/MAN reference model, Metropolitan Area Networks (MANs). IEEE Standardsdocuments are developed within the IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards through a consensus develop- ment process, approved by the American National Standards Institute, which brings together volunteers representing varied viewpoints and interests to achieve the final product. Volunteers are not necessarily members of the Institute and serve with- out compensation. While the IEEE administers the process and establishes rules to promote fairness in the consensus devel- opment process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the information contained in its standards. Use of an IEEE Standard is wholly voluntary. The IEEE disclaims liability for any personal injury, property or other dam- age, of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, or reliance upon this, or any other IEEE Standard document. The IEEE does not warrant or represent the accuracy or content of the material contained herein, and expressly disclaims any express or implied warranty, including any implied warranty of merchantability or fitness for a specific purpose, or that the use of the material contained herein is free from patent infringement. IEEE Standards documents are supplied “AS IS.” The existence of an IEEE Standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE Standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. Every IEEE Standard is subjected to review at least every five years for revi- sion or reaffirmation. When a document is more than five years old and has not been reaffirmed, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE Standard. In publishing and making this document available, the IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity. Nor is the IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing this, and any other IEEE Standards document, should rely upon the advice of a com- petent professional in determining the exercise of reasonable care in any given circumstances. Interpretations: Occasionally questions may arise regarding the meaning of portions of standards as they relate to specific applications. When the need for interpretations is brought to the attention of IEEE, the Institute will initiate action to prepare appropriate responses. Since IEEE Standards represent a consensus of concerned interests, it is important to ensure that any interpretation has also received the concurrence of a balance of interests. For this reason, IEEE and the members of its soci- eties and Standards Coordinating Committees are not able to provide an instant response to interpretation requests except in those cases where the matter has previously received formal consideration. Comments for revision of IEEE Standards are welcome from any interested party, regardless of membership affiliation with IEEE. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Comments on standards and requests for interpretations should be addressed to: Secretary, IEEE-SA Standards Board 445 Hoes Lane P.O. Box 1331 Piscataway, NJ 08855-1331 USA The IEEE and its designees are the sole entities that may authorize the use of the IEEE-owned certification marks and/or trademarks to indicate compliance with the materials set forth herein. Authorization to photocopy portions o…

Text truncated - open the document above for the full version.

in accordance with the requirements of FCC Report and Order: ET Docket 93-62, and OET Bulletin 65 Supplement C for 802.11b Wireless PDA MODEL: Tungsten C FCC ID: O3W200000 SEPTEMBER 27, 2002 REPORT NO: 02U1556-1 Prepared for PALM SOLUTIONS GROUP 400 N. McCarthy Blvd. Milpitas, CA 95035-5112 USA Prepared by COMPLIANCE CERTIFICATION SERVICES 561F MONTEREY ROAD MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 REPORT NO: 02U1556-1 DATE: September 27, 2002 FCC ID: O3W200000 COMPLIANCE CERTIFICATION SERVICES Page: 2 of 22 This report shall not be reproduced except in full, without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. CERTIFICATE OF COMPLIANCE (SAR EVALUATION) Date of Tests: September 27, 2002 Report No: 02U1556-1 APPLICANT: PALM SOLUTIONS GROUP 400 N. McCarthy Blvd. Milpitas, CA 95035-5112, USA MODEL: Tungsten C FCC ID: O3W200000 DEVICE CATEGORY: PORTABLE DEVICES EXPOSURE CATEGORY: GENERAL POPULATION/UNCONTROLLED EXPOSURE Test Sample is a: Production unit Operating mode: Maximum continuous output Tx Frequency: 2412 ~ 2462 MHz Max. O/P Power: 16.81 dBm (Conducted) Max. SAR (1g): 0.182 mW/g (2412 MHz) Application Type: Certification FCC Rule Part(s): §15.247 This wireless portable device has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment/general population exposure limits specified in ANSI/IEEE Std. C95.1-1992 and had been tested in accordance with the measurement procedures specified in FCC OET 65 Supplement C (released on 6/29/2001 see Test Report). I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Steve Cheng EMC Engineering Manager REPORT NO: 02U1556-1 DATE: September 27, 2002 FCC ID: O3W200000 COMPLIANCE CERTIFICATION SERVICES Page: 3 of 22 This report shall not be reproduced except in full, without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. TABLE OF CONTENT 1. EUT DESCRIPTION.............................................................................................4 2. REQUIREMENTS FOR COMPLIANCE TESTING DEFINED BY THE FCC...............5 3. DOSIMETRIC ASSESSMENT SYSTEM.................................................................5 3.1. MEASUREMENT SYSTEM DIAGRAM............................................................................................6 3.2. SYSTEM COMPONENTS................................................................................................................7 4. EVALUATION PROCEDURE................................................................................9 5. MEASUREMENT UNCERTAINTY.......................................................................12 6. EXPOSURE LIMIT..............................................................................................13 7. MEASUREMENT RESULTS...............................................................................14 7.1. SYSTEM VALIDATION..................................................................................................................14 7.2. TEST LIQUID CONFIRMATION....................................................................................................15 7.3. EUT TUNE-UP PROCEDURE.......................................................................................................16 7.4. EUT SETUP PHOTOS...................................................................................................................17 7.5. SAR MEASUREMENT RESULT....................................................................................................18 8. EUT PHOTOS....................................................................................................19 9. EQUIPMENTS LIST & CALIBRATION STATUS...................................................20 10. REFERENCES...................................................................................................21 11. ATTACHMENT..................................................................................................22 REPORT NO: 02U1556-1 DATE: September 27, 2002 FCC ID: O3W200000 COMPLIANCE CERTIFICATION SERVICES Page: 4 of 22 This report shall not be reproduced except in full, without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. 1. EUT DESCRIPTION APPLICANT: PALM SOLUTIONS GROUP 400 N. McCarthy Blvd. Milpitas, CA 95035-5112, USA MODEL: Tungsten C FCC ID: O3W200000 DEVICE CATEGORY: PORTABLE DEVICES EXPOSURE CATEGORY: GENERAL POPULATION/UNCONTROLLED EXPOSURE Test Sample is a: Production unit Operating mode: Maximum continuous output Tx Frequency: 2412 ~ 2462 MHz Max. O/P Power: 16.81 dBm (Conducted) Max. SAR (1g): 0.182 mW/g (2412 MHz) Application Type: Certification FCC Rule Part(s): §15.247 1 Specific Absorption Rate (SAR) is a measure of the rate of energy absorption due to exposure to an RF transmitting source (wireless portable device). 2 IEEE/ANSI Std. C95.1-1992 limits are used to determine compliance with FCC ET Docket 93-62. REPORT NO: 02U1556-1 DATE: September 27, 2002 FCC ID: O3W200000 COMPLIANCE CERTIFICATION SERVICES Page: 5 of 22 This report shall not be reproduced except in full, without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. 2. REQUIREMENTS FOR COMPLIANCE TESTING DEFINED BY THE FCC The US Federal Communications Commission h…

Text truncated - open the document above for the full version.

System Validation - D2450V2 S/N:706 (Antenna input power: 250 mW) SAM-2; Flat Probe: ET3DV6 - SN1578; ConvF(4.50,4.50,4.50); Crest factor: 1.0 Head 2450MHz: σ = 1.89 mho/m ε r = 38.7 ρ = 1.00 g/cm 3 Cube 5x5x7: Peak: 29.3 mW/g, SAR (1g): 14.0 mW/g, SAR (10g): 6.35 mW/g, (Worst-case extrapolation) Penetration depth: 6.3 (6.1, 6.9) [mm] Powerdrift: 0.02 dB Ambient Temperature (degree C): 23.5 Liquid Temperature (degree C): 21.2 SAR Tot [mW/g] 1.56E+0 4.68E+0 7.81E+0 1.09E+1 1.41E+1 09/27/02 COMPLIANCE CERTIFICATION SERVICES System Validation - D2450V2 S/N:706 (Antenna input power: 250 mW) SAM-2; Probe: ET3DV6 - SN1578; ConvF(4.50,4.50,4.50); Crest factor: 1.0 Head 2450MHz: σ = 1.89 mho/m ε r = 38.7 ρ = 1.00 g/cm 3 : , , () Penetration depth: 6.3 (6.1, 7.0) [mm] Ambient Temperature (degree C): 23.5 Liquid Temperature (degree C): 21.2 09/27/02 COMPLIANCE CERTIFICATION SERVICES 0 10 20 30 0102030405060708090100110 SAR tot [mW/g] [mm]

Palm_Tungstea C, Frequency: 2412 MHz Frequency: 2450 MHz; Crest factor: 1.0 Medium: Muscle 2450 MHz: σ = 2.03 mho/m ε r = 50.3 ρ = 1.00 g/cm 3 SAM-1 Phantom; Flat Section; Position: (270°,90°) Probe: ET3DV6 - SN1578; ConvF(4.10,4.10,4.10); SAR:Cube 5x5x7: Peak: 0.391 mW/g, SAR (1g): 0.182 mW/g, SAR (10g): 0.0781 mW/g, (Worst-case extrapolation) Penetration depth: 6.6 (6.3, 7.3) [mm]; Powerdrift: -0.13 dB Coarse: Dx = 16.0, Dy = 15.0, Dz = 0.0 Ambient Temperature (degree C): 23.0 Liquid Temperature (degree C): 21.4 SAR Tot [mW/g] 2.12E-2 6.36E-2 1.06E-1 1.48E-1 1.91E-1 09/27/02 COMPLIANCE CERTIFICATION SERVICES Palm_Tungstea C, Frequency: 2412 MHz Frequency: 2450 MHz; Crest factor: 1.0 Medium: Muscle 2450 MHz: σ = 2.03 mho/m ε r = 50.3 ρ = 1.00 g/cm 3 SAM-1 Phantom; Section; Position: Probe: ET3DV6 - SN1578; ConvF(4.10,4.10,4.10); SAR:: , , () Penetration depth: 6.9 (6.7, 7.7) [mm]; Z-Axis: Dx = 0.0, Dy = 0.0, Dz = 2.0 Ambient Temperature (degree C): 23.0 Liquid Temperature (degree C): 21.4 09/27/02 COMPLIANCE CERTIFICATION SERVICES 0.0 0.1 0.2 0.3 0.4 01020304050607080 SAR tot [mW/g] [mm] Palm_Tungstea C, Frequency: 2437 MHz Frequency: 2450 MHz; Crest factor: 1.0 Medium: Muscle 2450 MHz: σ = 2.03 mho/m ε r = 50.3 ρ = 1.00 g/cm 3 SAM-1 Phantom; Flat Section; Position: (270°,90°) Probe: ET3DV6 - SN1578; ConvF(4.10,4.10,4.10); SAR:Cube 5x5x7: Peak: 0.269 mW/g, SAR (1g): 0.131 mW/g, SAR (10g): 0.0599 mW/g, (Worst-case extrapolation) Penetration depth: 7.6 (7.3, 8.2) [mm]; Powerdrift: -0.17 dB Coarse: Dx = 16.0, Dy = 15.0, Dz = 0.0 Ambient Temperature (degree C): 23.0 Liquid Temperature (degree C): 21.3 SAR Tot [mW/g] 1.40E-2 4.20E-2 7.00E-2 9.80E-2 1.26E-1 09/27/02 COMPLIANCE CERTIFICATION SERVICES Palm_Tungstea C, Frequency: 2437 MHz Frequency: 2450 MHz; Crest factor: 1.0 Medium: Muscle 2450 MHz: σ = 2.03 mho/m ε r = 50.3 ρ = 1.00 g/cm 3 SAM-1 Phantom; Section; Position: Probe: ET3DV6 - SN1578; ConvF(4.10,4.10,4.10); SAR:: , , () Penetration depth: 7.0 (6.7, 7.8) [mm]; Z-Axis: Dx = 0.0, Dy = 0.0, Dz = 2.0 Ambient Temperature (degree C): 23.0 Liquid Temperature (degree C): 21.3 09/27/02 COMPLIANCE CERTIFICATION SERVICES -0.10 0.00 0.10 0.20 0.30 102030405060708090 SAR tot [mW/g] [mm] Palm_Tungstea C, Frequency: 2462 MHz Frequency: 2450 MHz; Crest factor: 1.0 Medium: Muscle 2450 MHz: σ = 2.03 mho/m ε r = 50.3 ρ = 1.00 g/cm 3 SAM-1 Phantom; Flat Section; Position: (270°,90°) Probe: ET3DV6 - SN1578; ConvF(4.10,4.10,4.10); SAR:Cube 5x5x7: Peak: 0.247 mW/g, SAR (1g): 0.121 mW/g, SAR (10g): 0.0557 mW/g, (Worst-case extrapolation) Penetration depth: 7.5 (7.4, 7.9) [mm]; Powerdrift: -0.07 dB Coarse: Dx = 16.0, Dy = 15.0, Dz = 0.0 Ambient Temperature (degree C): 23.0 Liquid Temperature (degree C): 21.4 SAR Tot [mW/g] 1.23E-2 3.69E-2 6.15E-2 8.61E-2 1.11E-1 09/27/02 COMPLIANCE CERTIFICATION SERVICES Palm_Tungstea C, Frequency: 2462 MHz Frequency: 2450 MHz; Crest factor: 1.0 Medium: Muscle 2450 MHz: σ = 2.03 mho/m ε r = 50.3 ρ = 1.00 g/cm 3 SAM-1 Phantom; Section; Position: Probe: ET3DV6 - SN1578; ConvF(4.10,4.10,4.10); SAR:: , , () Penetration depth: 6.5 (6.2, 7.2) [mm]; Z-Axis: Dx = 0.0, Dy = 0.0, Dz = 2.0 Ambient Temperature (degree C): 23.0 Liquid Temperature (degree C): 21.4 09/27/02 COMPLIANCE CERTIFICATION SERVICES -0.10 0.00 0.10 0.20 0.30 102030405060708090 SAR tot [mW/g] [mm]

Model: Tungsten C P/S: MEI International, P/N: MADA-3025-PS3 Setup photos 561F Monterey Road, San Jose, CA 95037 USA Tel: (408) 463-0885 Fax: (408) 463-0888 Data#: 7File#: 03U1924C.EMIDate: 04-07-2003 Time: 14:51:18 Level (dBuV)Compliance Certification Service 90 40 -10 0.1530 Frequency (MHz) 0.51.2.5.1020 AVERAGE CISPR CLASS-B Trace: 5 Ref Trace: Project # : 03U1924-1 Test Engineer : NEELESH RAJ Company : PALM SOLUTIONS GROUP EUT : 2.4GHz PDA Model : TUNGSTEN C Test Config. : EUT/AC ADAPTER/PC/MONITOR/MODEM/PRINTER Test of Target: CISPR 22B : L1 (PEAK;BLACK AVG;GREEN) : 115VAC/60Hz 561F Monterey Road, San Jose, CA 95037 USA Tel: (408) 463-0885 Fax: (408) 463-0888 Data#: 7File#: 03U1924D.EMIDate: 04-07-2003 Time: 15:02:11 Level (dBuV)Compliance Certification Service 90 40 -10 0.1530 Frequency (MHz) 0.51.2.5.1020 AVERAGE CISPR CLASS-B Trace: 5 Ref Trace: Project # : 03U1924-1 Test Engineer : NEELESH RAJ Company : PALM SOLUTIONS GROUP EUT : 2.4GHz PDA Model : TUNGSTEN C Test Config. : EUT/AC ADAPTER/PC/MONITOR/MODEM/PRINTER Test of Target: CISPR 22B : L2 (PEAK;BLACK AVG;GREEN) : 115VAC/60Hz

EUT : Palm Tungsten C, FCC ID:O3W200000 PEAK POWER TEST SETUP TEST PROCEDURE The transmitter output is connected to the power meter. The power meter is set to read peak power. LIMIT 30 dBm. RESULTS No non-compliance noted: RESULTS The cable assembly insertion loss of 10.7 dB (including 10 dB pad and 0.7 dB cable) was entered as an offset in the power meter to allow for direct reading of power. Channel Frequency (MHz) Peak Power (dBm) Limit (dBm) Margin (dB) Low 2412 16.78 30 -13.22 Middle 2437 16.75 30 -13.25 High 2462 16.70 30 -13.3 TEST AND MEASUREMENT EQUIPMENT Name of Equipment Manufacturer Model Serial Number Calibration Due Date PSA Series Spectrum Analyzer Aglient E4446A US42070220 1/13/04 PSA Series Spectrum Analyzer Aglient E4440A US42221737 9/24/03 EUT Peak Power Meter

Test Report ------------------------------------------------------------------------------ 1/41 Report No.: A5415925 Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440 MEASUREMENT REPORT of WIRELESS LAN MODULE Applicant : Palm Solutions Group Model No. : Tungsten C EUT : WLAN Module for the Palm Tungsten C FCC ID : O3W200000 Report No. : A5415925 Tested by : Training Research Co., Ltd. TEL : 886-2-26935155 FAX : 886-2-26934440 255 Nanyang St., Shijr, Taipei Hsien 221, Taiwan, R.O.C. Test Report ------------------------------------------------------------------------------ 3/41 Report No.: A5415925 Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440 Tables of Contents I. GENERAL ..................................................................................................................... 4 1.1 Introduction .............................................................................................................. 5 1.2 Description of EUT .................................................................................................. 5 1.3 Description of Support Equipment ........................................................................... 6 1.4 Configuration of System Under Test ........................................................................ 7 1.5 Verify the Frequency and Channel ........................................................................... 8 1.6 Test Procedure ......................................................................................................... 9 1.7 Location of the Test Site .......................................................................................... 9 1.8 General Test Condition ............................................................................................ 9 II. Section 15.203 : Antenna Requirement........................................................................ 10 III. Section 15.207 : Power Line Conducted Emissions for AC Powered Units ............. 11 3.1 Test Condition & Setup ........................................................................................... 11 3.2 List of Test In…

Text truncated - open the document above for the full version.