O4X5-LW2410370Lone Worker Active RFID Tag

Elpas Lone Worker Transmitter P/N: 5-LW241020-0, 5-LW241037-0, 5-LW240020-0, 5-LW240057-0 User Guide www.elpas.com Page 1 of 6 V1/March 2015 Introduction This User Guide provides basic instructions for the successful usage of the Lone Worker Transmitter. CAUTION! Reasonable effort was made to ensure that the specifications and other information in this guide are accurate and complete at the time of its publication. Nonetheless, all information contained in this document is subject to change at any time without prior notice. Any modifications to this equipment without prior written consent of Elpas Solutions Ltd. will void all warranties including the pertinent regulatory certifications and as such revoke your authority to operate this product. Furthermore, unauthorized modifications may also result in damage to this device and may cause a safety hazard to the users. Product Description The Elpas Lone Worker Transmitter is a personal duress button device with optional pull cord and fall detection capabilities. The LWT is designed for real-time monitoring and tracking of staff members and visitors. The LoneWorker Fall Detect Transmitter is designed both for seniors in assisted living facilities or work place staff members that may be subject to attack or injury in high-risk environments. Alarms may be triggered either by squeezing the two side buttons. In the Fall Detect version, when worn on a belt, a short rip cord may be attached to a belt loop so that an alarm is transmitted when the device is pulled off the belt. Note: Users can also wear the LoneWorker Transmitter as a pendant using a lanyard. If you choose to do so, make sure you use a lanyard for which, the force required to unlatch the tether switch is less than the force required to open the clasp. The pull mechanism is particularly useful for seniors with arthritis who have difficulties pressing buttons. The LoneWorker Fall Detect Transmitter also detects falls and alarms when tilted horizontally. To prevent false alarms, the device indicates a pre-alarm by giving the wearer a chance to cancel the alarm before it is transmitted by pressing on the front cancel button. (Actual product may vary from photo) Button press or pull cord should be used as the primary means of calling for help even after a fall. The fall detection is meant to alert in the event that the victim falls unconscious and may not trigger if not sufficiently horizontal. LWT based help call systems may be monitored by Elpas ELC controllers and/or by Eiris Software. Elpas Low Frequency Beacons or IR readers may be used to provide room level indoor location. Outputs on all Elpas network devices may be used to drive sirens, strobe lights or PA systems. Alerts may be sent to various handheld devices such as DECT handsets using Eiris DECT interfaces or to IOS or Android smartphones using EirisGo apps. Calls may be cleared by exposing the LWT to a responder’s handheld LF beacon requiring that staff arrive at the location of the caller. The same Elpas infrastructure used for the duress solution may also be leveraged for Access control, Asset tracking, Attendance and intrusion alarming making Elpas one of the most competitive comprehensive solutions available today. Elpas Lone Worker Transmitter – User Guide www.elpas.com Page 2 of 6 V1/March 2015 Emergency Call Button Events Factory Default: B1=0 (Button Up) Activation/Emergency Call (LoneWorker Panic event): Pressing both buttons, simultaneously, for at least 1 second or pulling the cord (in the Fall Detect version) is - B1=1 (Button Down) and last LF location, 6 RF messages, 3 for B1 Down and 3 for last LF, are transmitted (each @ 4ms in duration), 312.5ms apart. Upon button release, B1=0 (Button Up), 3 RF messages are transmitted (each @ 4ms in duration), 312.5ms apart. Alert Testing (LoneWorker Test event): Pressing either button alone, B1=1 (Button Down), 3 RF messages are transmitted (each @ 4ms in duration), 312.5ms apart. Upon button release, B1=0 (Button Up) 3 RF messages are transmitted (each @ 4ms in duration), 312.5ms apart. Product Specifications RTLS Technologies IR (800nm) RF (433MHz) LF (125KHz) RF (M otion/Stationar y) Supervision messages every 30secs /60secs IR (Motion/S tationar y) Supervision messages every 5secs /60secs RF under LF 6 RF transmissions (each transmission @ 4ms in duration), 312.5ms apart IR under LF Does not transmit E vent Messages Button Pr ess/ Rel ease Low Batter y 3 RF transmissions (each transmission @4ms in duration), 312.5ms apart Power S ource CR2450 Lithium Battery Batter y Life 18 to 36 months, depending on usage LED Status Indicator Button Press/Release, Motion/Stationary Entering/Exiting LF Field, Low Battery Badge ID Unique, factory-programmed ID Constr uction Nylon Plastic (IP65) Dimensions ( H x W x D) 8.3 x 4.4 x 1.7 cm (3.3 x 1.7 x 0.7 inches) Weight 40 grams (1.4 ounces) Mounting Belt worn Operating Envir onm ent Temp: -30°C to 70°C (25°F to 159°F) Humidity: 95% non-condensing Managem ent S oftware Eiris V4.8 or higher Regulator y IC, FCC & CE compliant Warranty 1 year limited (excluding battery) Product offerings and specifications are subject to change without notice. Ordering Information 5-LW 240020-0 LoneWorker Transmitter, RF/LF 5-LW 240057-0 LoneWorker Fall Detect Transmitter, RF/LF 5-LW241020-0 LoneWorker Transmitter, IR/RF/LF 5-LW 241037-0 LoneWorker Fall Detect Transmitter, IR/RF/LF Accessories 5-P B A90003 CR2450 Lithium Battery (tray of 25pcs) 5-LW 009800-0 Belt Clip – 5 units 5-LW 009700-0 LoneWorker Pull Cord – 5 units 5-LW A90002 LW Enclosure Replacement Kit (set of 5) Elpas Lone Worker Transmitter – User Guide www.elpas.com Page 3 of 6 V1/March 2015 Initial Activation & Software Enrollment The Lone Worker Transmitter is shipped from the factory in Sleep Mode to conserve battery power during transit. 1. Prior to initial usage, remove the Activation Label and then press, simultaneously, both of the emergency call push buttons for at least 7 seconds. Thi…

Text truncated - open the document above for the full version.

RF_160, Issue 03 Declaration of Authorization We Name: Elpas Solutions Ltd. Address: 23 Habarzel street, Tel Aviv 69710 Country: Israel Declare that: Name Representative of agent: ............. (1) Agent Company name: Hermon Laboratories Ltd. Address: Harakevet Industrial Zone City: Binyamina 30500 Country Israel is authorized to apply for Certification of the following product(s): Product description:  Lone Worker Active RFID Tag Type designation:  5-LW241037-0, 5-LW240057-0, 5-LW241020-0, 5-LW240020-0 Trademark:  Elpas on our behalf. Date: April 14, 2015 City: Tel Aviv Name: Arick Elshtein (2) Function: International Compliance Manager Signature: Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

Tyco Security Products 23 Habarzel Street Tel-Aviv 69710, Israel Tele: +972 3 768 1400 Fax: +972 3 768 1415 www.tycosecurityproducts.com Safer. Smarter. Tyco.™ Access Control, Video, Location-Based Tracking and Intrusion. UNIFIED. We, the undersigned, Elpas Solutions Ltd. 23 Habarzel st. Tel Aviv 6971031 Israel 16/2/15 Declare under our own responsibility that the below so called Lone Worker tags are similar to each other in the following manner All variants have the same Housing/enclosure, PCB , RF (ASK) Transmitter (433.92 MHZ) , LF Receiver(125 KHZ) , and 3 pushbuttons, and they vary in accordance with the following description: 5-LW241037-0 has also a fall detector and IR transmitter 5-LW240057-0 has also a fall detector and NO IR 5-LW241020-0 has also an IR transmitter, but NO fall detector 5-LW240020-0 Does NOT have fall detector nor IR Regards Arick Arick Elshtein / International Standards Certification Elpas Solutions Ltd / Tyco Security Products Tel: +972 3 645 6714/ Mobile: + 972 54 6775714 23HaBarzel street / Tel Aviv, 6971031 / Israel [email protected]

FCC, Request for non-disclosure Date: 16-Jul-10 RF_501, Issue 6 Page 1 of 1 Company Name: Elpas Solutions Ltd. Address : 23 Habarzel street City: Tel Aviv 69710 Country: Israel To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: O4X5-LW2410370 Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, a pplicant hereby requests Short-Term Confidential treatment of the following materials (note 1): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Planned Release Date STC: (notes 2, 3, 4, 5) Date: April 14, 2015 Name and signature of applicant: Arick Elshtein Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

Elpas Solutions Ltd. FCC ID: O4X5-LW2410370 IC:1467G-5LW2410370 Page 1 of 3 EXTERNAL PHOTOGRAPHS This document contains 2 photographs Elpas Solutions Ltd. FCC ID: O4X5-LW2410370 IC:1467G-5LW2410370 Page 2 of 3 Photograph No.1 Lone Worker Active RFID Tag front view Elpas Solutions Ltd. FCC ID: O4X5-LW2410370 IC:1467G-5LW2410370 Page 3 of 3 Photograph No.2 Lone Worker Active RFID Tag rear side view

Elpas Solutions Ltd. FCC ID: O4X5-LW2410370 IC:1467G-5LW2410370 Page 1 of 2 Label Model: 5-LW241037-0 Model: 5-LW240057-0 Model: 5-LW240020-0 Model: 5-LW241020-0 Elpas Solutions Ltd. FCC ID: O4X5-LW2410370 IC:1467G-5LW2410370 Page 2 of 2 Label location Label with FCC ID:O4X5-LW2410370 and IC:1467G-5LW2410370 is located at the rear side panel of the Lone Worker active RFID tag. The statement according to FCC part 15 §15.19(a)(3) is placed in User’s Guide, page 6 (Application exhibit User_manual_26351). FCC ID:O4X5-LW2410370 IC:1467G- 5LW2410370

Elpas Solutions Ltd. FCC ID: O4X5-LW2410370 IC:1467G-5LW2410370 Page 1 of 5 INTERNAL PHOTOGRAPHS This document contains 4 photographs Elpas Solutions Ltd. FCC ID: O4X5-LW2410370 IC:1467G-5LW2410370 Page 2 of 5 Photograph No.1 Lone Worker Active RFID Tag internal view Elpas Solutions Ltd. FCC ID: O4X5-LW2410370 IC:1467G-5LW2410370 Page 3 of 5 Photograph No.2 Lone Worker Active RFID Tag internal side view Elpas Solutions Ltd. FCC ID: O4X5-LW2410370 IC:1467G-5LW2410370 Page 4 of 5 Photograph No.3 Tag PCB front view Elpas Solutions Ltd. FCC ID: O4X5-LW2410370 IC:1467G-5LW2410370 Page 5 of 5 Photograph No.4 Tag PCB second side view

Elpas Solutions Ltd. FCC ID: O4X5-LW2410370 IC:1467G-5LW2410370 Product Description The Elpas Lone Worker Transmitter is a personal duress button device with optional pull cord and fall detection capabilities. The LWT is designed for real-time monitoring and tracking of staff members and visitors. The LoneWorker Fall Detect Transmitter is designed both for seniors in assisted living facilities or work place staff members that may be subject to attack or injury in high- risk environments. Alarms may be triggered either by squeezing the two side buttons. In the Fall Detect version, when worn on a belt, a short rip cord may be attached to a belt loop so that an alarm is transmitted when the device is pulled off the belt. The pull mechanism is particularly useful for seniors with arthritis who have difficulties pressing buttons. The LoneWorker Fall Detect Transmitter also detects falls and alarms when tilted horizontally. To prevent false alarms, the device indicates a pre-alarm by giving the wearer a chance to cancel the alarm before it is transmitted by pressing on the front cancel button. The transmitter also contains a LF receiver that delivers real time near-exit, sub-room or hallway location awareness Specifications Signaling Technologies Active RFID: RF 433.92MHz @ASK modulation (or a variant 433.42 MHz @ GFSK by software ) LF (125 kHz) RF (Motion/Stationary) Supervision messages every 30secs /60secs IR (Motion/Stationary) Supervision messages every 5secs /60secs RF Upon Entry into LF area 6 RF transmissions (each transmission @ 4ms in duration), 312.5ms apart Supervised Events: Button Press/Release, LF, Low Voltage 3 RF transmissions (each transmission about 4 ms in duration), 312.5ms apart Power Source CR2450 Lithium battery Management Software Eiris V4.8 or higher

Hermon Laboratories Ltd. Harakevet Industrial Zone, Binyamina 30500, Israel Tel. +972-4-6288001 Fax. +972-4-6288277 E-mail: [email protected] Page 1 of 53 Report ID: ELPRAD_FCC.26351.docx Date of Issue: 22-Feb-15 ELECTRICAL TESTING 0839.01 TEST REPORT ACCORDING TO: FCC CFR 47 Part 15 subpart C, section 15.231(e) and subpart B RSS-210 issue 8 Annex 1, ICES-003 Issue 5:2012 FOR: Elpas Solutions Ltd. Lone Worker Active RFID Tag Models: 5-LW241037-0 5-LW240057-0 5-LW241020-0 5-LW240020-0 FCC ID:O4X5-LW2410370 IC:1467G-5LW2410370 This report is in conformity with ISO/ IEC 17025. The "A2LA Accredited" symbol endorsement applies only to the tests and calibrations that are listed in the scope of Hermon Laboratories accreditation. The test results relate only to the items tested. This test report shall not be reproduced in any form except in full with the written approval of Hermon Laboratories Ltd. Report ID: ELPRAD_FCC.26351.docx Date of Issue: 22-Feb-15 Page 2 of 53 Table of contents 1 Applicant information ..................................................................................................................................................... 3 2 Equipment under test attributes .................................................................................................................................... 3 3 Manufacturer information .............................................................................................................................................. 3 4 Test details .................................................................................................................................................................... 3 5 Tests summary .............................................................................................................................................................. 4 6 EUT description ............................................................................................................................................................. 5 6.1 General information ....................................................................................................................................................... 5 6.2 Test configuration .......................................................................................................................................................... 5 6.3 Changes made in EUT .................................................................................................................................................. 5 6.4 EUT test positions ......................................................................................................................................................... 6 6.5 Transmitter characteristics ............................................................................................................................................ 7 7 Transmitter tests according to 47CFR part 15 subpart C requirements ........................................................................ 8 7.1 Periodic operation requirements ................................................................................................................................... 8 7.2 Field strength of emissions .......................................................................................................................................... 13 7.3 Occupied bandwidth test ............................................................................................................................................. 28 7.4 Antenna requirements ................................................................................................................................................. 31 8 Unintentional emissions .............................................................................................................................................. 32 8.1 Radiated emission measurements .............................................................................................................................. 32 9 APPENDIX A Test equipment and ancillaries used for tests ....................................................................................... 38 10 APPENDIX B Measurement uncertainties ................................................................................................................... 39 11 APPENDIX C Test laboratory description ................................................................................................................... 40 12 APPENDIX D Specification references ....................................................................................................................... 40 13 APPENDIX E Test equipment correction factors ......................................................................................................... 41 14 APPENDIX F Abbreviations and acronyms ................................................................................................................. 52 15 APPENDIX G Manufacturer’s declaration of similarity ................................................................................................ 53 Report ID: ELPRAD_FCC.26351.docx Date of Issue: 22-Feb-15 Page 3 of 53 1 Applicant information Client name: Elpas Solutions Ltd. Address: 23 Habarzel street, Tel Aviv 69710, Israel Telephone: +972 3768 1400 Fax: +972 3768 1415 E-mail: [email protected] Contact name: Mr. Arick Elshtein 2 Equipment under test attributes Product name: Lone Worker Active RFID Tag Product type: Transceiver operating at 433 MHz (Tx) and 125 kHz (Rx) Model(s): 5-LW241037-0 Hardware version: 1.0 Software release: 1.0 Receipt date 23-Dec-14 3 Manufacturer information Manufacturer name: Elpas Solutions Ltd. Address: 23 Habarzel street, Tel Aviv 69710, Israel Telephone: +972 3768 1400 Fax: +972 3768 1415 E-Mail: [email protected] Contact name: Mr. Arick Elshtein 4 Test details Project ID: 26351 Locat…

Text truncated - open the document above for the full version.

Elpas Solutions Ltd. FCC ID: O4X5-LW2410370 IC:1467G-5LW2410370 Page 1 of 5 SETUP PHOTOGRAPHS This document contains 4 photographs Elpas Solutions Ltd. FCC ID: O4X5-LW2410370 IC:1467G-5LW2410370 Page 2 of 5 Photograph No.1 Setup for spurious emission field strength measurements in the anechoic chamber below 30 MHz Elpas Solutions Ltd. FCC ID: O4X5-LW2410370 IC:1467G-5LW2410370 Page 3 of 5 Photograph No.2 Setup for spurious emission field strength measurements in the anechoic chamber, EUT close view Elpas Solutions Ltd. FCC ID: O4X5-LW2410370 IC:1467G-5LW2410370 Page 4 of 5 Photograph No.3 Setup for carrier field strength, spurious emission field strength measurements in the anechoic chamber in 30 – 1000 MHz range Elpas Solutions Ltd. FCC ID: O4X5-LW2410370 IC:1467G-5LW2410370 Page 5 of 5 Photograph No.4 Setup for spurious emission field strength measurements in the anechoic chamber above 1000 MHz range