ODMTRA3G211n 3G Mobile Router

Traveler 3G II 11n 3G Mobile Router User’s Manual Copyright and Disclaimer AirLive AirMax DUO User’s Manual Copyright & Disclaimer No part of this publication may be reproduced in any form or by any means, whether electronic, mechanical, photocopying, or recording without the written consent of OvisLink Corp. OvisLink Corp. has made the best effort to ensure the accuracy of the information in this user’s guide. However, we are not liable for the inaccuracies or errors in this guide. Please use with caution. All information is subject to change without notice All Trademarks are properties of their respective holders. Copyright and Disclaimer AirLive AirMax DUO User’s Manual ii Regulatory Information Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: To assure continued compliance, (example - use only shielded interface cables when connecting to computer or peripheral devices) any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. Copyright and Disclaimer AirLive AirMax DUO User’s Manual IMPORTANT NOTE FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. FCC NOTICE: To comply with FCC part 15 rules in the United States, the system must be professionally installed to ensure compliance with the Part 15 certification. It is the responsibility of the operator and professional installer to ensure that only certified systems are deployed in the United States. The use of the system in any other combination (such as co-located antennas transmitting the same information) is expressly forbidden. Table of Contents i AirLive Traveler 3G II User’s Manual Table of Contents 1. Introduction .............................................................................................. 2 1.1 Package Contents ............................................................................. 2 1.2 System Requirements for Configuration ............................................ 3 1.3 Interfaces ........................................................................................... 3 1.4 Features ............................................................................................ 6 2. Configuring Wireless WAN Mobile Broadband Router ......................... 9 2.1 Installation Considerations ................................................................. 9 2.2 Installation Instructions- Get Start Networking .................................... 9 2.3 Establish WiFi Connection ............................................................... 13 3. Using the Configuration Menu .............................................................. 14 3.1 Wizard setting .................................................................................. 15 3.2 Administrator’s Main Menu ............................................................... 25 3.2.1 Basic Setting ............................................................................................................ 25 3.2.2 Forwarding Rules ..................................................................................................... 50 3.2.3 Security Setting ........................................................................................................ 56 3.2.4 Advanced Setting ..................................................................................................... 68 3.2.5 Tool Box ................................................................................................................... 84 4. Troubleshooting .................................................................................... 87 5. Technical Specifications ....................................................................... 93 AirLive Traveler 3G II User’s Manual 2 1 1. Introduction The Traveler 3G II is a high-performance tool that supports wireless networking at home, work, or in a public place. The Traveler 3G II supports USB 3G modem card, either WCDMA or EVDO and even HSDPA as well. It also supports 802.11n Wi-Fi standard and 802.3 Ethernet network. The Traveler 3G II is compatible with industry security features. 1.1 Package Contents Importance: Check your product package contents FIRST. The Trav…

Text truncated - open the document above for the full version.

OvisLink Corp. 5F , No.6 , Lane 130 , Min-Chuan Rd. , Hsin-Tien City , Taipei County 231 , Taiwan Attestation FCC ID：ODMTRA3G2 Product: 11n 3G Mobile Router Model : Traveler 3G II Statements: We, the undersigned, hereby certify that only 11 channels from 2412-2462MHz will be used in USA, other channels will be disabled by software. Sincerely yours, _________________________ Name/ Title : Albert Yeh / Vice President Company name : OvisLink Corp.

OvisLink Corp. 5F , No.6 , Lane 130 , Min-Chuan Rd. , Hsin-Tien City , Taipei County 231 , Taiwan Date:2010-6-18 Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize Mr. Alex Chiu / Director of Compliance Engineering Services, Inc., d.b.a. Compliance Certification Services and hereafter referred to as CCS, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Mr. Alex Chiu of CCS on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing CCS as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, __ ___________________________ name/ title : Albert Yeh / Vice President tel : 886-2-22186888#826 fax : 886-2-86676352 email : [email protected] REMARK: 1. This authorization letter will be sent along with your application when filing with the Certification Division. 2. Please follow the format and type it on company letterhead and send original to us. 3. Authorized signature must be in agreement with grantee code contact in FCC database.

Compliance Certification Services Inc. Report No.：T100510402 Page 1 External Photo (MODEL: Traveler 3G II) Compliance Certification Services Inc. Report No.：T100510402 Page 2 Compliance Certification Services Inc. Report No.：T100510402 Page 3 Adapter 1 Adapter 2 Compliance Certification Services Inc. Report No.：T100510402 Page 4 Adapter 3 Adapter 4 Compliance Certification Services Inc. Report No.：T100510402 Page 5 Battery 1

Traveler 3G II Diagram Label location Label location WiFi Mobile Broadband Gateway P/N: 70750Y20EA0ZAG1A1 MAC: 00501821D24A S/N: 8X08400001 Model: CDM530AM FCC ID: PBLCDM530AM MADE IN TAIWAN FCC Caution: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired o peration

Compliance Certification Services Inc. Report No.：T100510402 Page 6 Internal Photo Compliance Certification Services Inc. Report No.：T100510402 Page 7 Compliance Certification Services Inc. Report No.：T100510402 Page 8

Compliance Certification Services Inc. FCC ID: ODMTRA3G2 Page 1 RF Exposure Evaluation Assessment 11n 3G Mobile Router Model Number: Traveler 3G II Brand: Air Live Issued for OvisLink Corp. 5F , No.6 , Lane 130 , Min‐Chuan Rd. , Hsin‐Tien City , Taipei County 231 , Taiwan Compliance Certification Services Inc. FCC ID: ODMTRA3G2 Page 2 1. Product description: 11n 3G Mobile Router 1.1. Functions description : ‐Whiling connecting with any certified 3G dongle, any device with WLAN may then be able to access internet via this mobile router. Please see Figure 1; or ‐ This device (Router) can be connected to the Internet with a external XDSL Modem when a 3G dongle is not available. Please see the Figure 2. For detail product information, please refer to attached user manual. Compliance Certification Services Inc. FCC ID: ODMTRA3G2 Page 3 2. EUT photos and antenna locations Compliance Certification Services Inc. FCC ID: ODMTRA3G2 Page 4 WLAN antenna location and WLAN antenna distance to the end of USB connector (which is the shortest distance where the certified 3G dongle connected.) Antenna 4 . 3 c m 5 . 7 c m Compliance Certification Services Inc. FCC ID: ODMTRA3G2 Page 5 3. Conducted average output power 802.11b mode Channel Frequency Average Power Chain0 (MHz) (dBm) Low 2412 13.35 Middle 2437 13.29 High 2462 13.27 802.11g Normal Mode Channel Frequency Average Power Chain0 (MHz) (dBm) Low 2412 11.62 Middle 2437 11.82 High 2462 11.49 802.11n HT‐20 Mode Channel Frequency Average Power Chain0 (MHz) (dBm) Low 2412 8.72 Middle 2437 9.11 High 2462 9.08 802.11n HT‐40 Mode Channel Frequency Average Power Chain0 (MHz) (dBm) Low 2422 9.19 Middle 2437 9.23 High 2452 9.07 Compliance Certification Services Inc. FCC ID: ODMTRA3G2 Page 6 4. Summary of the RF evaluation result 4.1 Justification of Stand‐alone SAR evaluation The maximum average output power of 802.11bgn: b mode: 13.29dBm (21.33mW) g mode: 11.82dBm (15.21mW) HT‐20 : 9.11dBm (8.15mW) HT‐40 : 9.23dBm (8.38mW) According to KDB 447498 D01 Mobile Portable RF Exposure v04, Stand‐alone SAR evaluation for WLAN is not required because the output power is lower than the power threshold=60/f : 60/2.437=24.62mW No stand‐alone SAR evaluation required 4.2 Justification of the co‐location simultaneous transmission SAR evaluation ‐ 3G dongle is not a part of the EUT ‐ any certified 3G dongle can be connected to the EUT ‐ based on current WLAN antenna distance to the USB connector as indicated in page 4, the min. distance is 5.7cm; ‐ and assume the max. SAR value of 3G dongle is 1.6W/kg ‐ per KDB 447498 D01 Mobile Portable RF Exposure v04, item 3) b) ii) (1): Min. WLAN Antenna‐ 3G antenna = 5.7cm >5cm No co‐location simultaneous transmission SAR evaluation required.

Compliance Certification Services Inc. Reference No.: 91002401-RP1 Report No.：T100510402-RP1 FCC ID：ODMTRA3G2 Date of Issue: May 25, 2010 Page 1 FCC 47 CFR PART 15 SUBPART C: 2008 AND ANSI C63.4: 2003 TEST REPORT For 11n 3G Mobile Router Model Number: Traveler 3G II Brand: Air Live Issued for OvisLink Corp. 5F , No.6 , Lane 130 , Min-Chuan Rd. , Hsin-Tien City , Taipei County 231 , Taiwan Issued by Compliance Certification Services Inc. Tainan Lab. No. 8, Jiu Cheng Ling, Jiaokeng Village,Sinhua Township, Tainan Hsien 712, Taiwan R.O.C. TEL: 886-6-580-2201 FAX: 886-6-580-2202 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. Ltd. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document Total Page: 125 Compliance Certification Services Inc. Reference No.: 91002401-RP1 Report No.：T100510402-RP1 FCC ID：ODMTRA3G2 Date of Issue: May 25, 2010 Page 2 REVISION HISTORY Rev. Issue Date Revisions Effect Page Revised By 00 May 25, 2010 Initial Issue ALL Leah Peng Compliance Certification Services Inc. Reference No.: 91002401-RP1 Report No.：T100510402-RP1 FCC ID：ODMTRA3G2 Date of Issue: May 25, 2010 Page 3 TABLE OF CONTENTS 1. TEST REPORT CERTIFICATION ..........................................................................................................4 2. EUT DESCRIPTION...................................................................................................................................5 2.1 DESCRIPTION OF EUT & POWER ......................................................................................................5 3. DESCRIPTION OF TEST MODES...........................................................................................................7 4. TEST METHODOLOGY ...........................................................................................................................8 5. FACILITIES AND ACCREDITATIONS .................................................................................................8 5.1 FACILITIES.............................................................................................................................................8 5.2 EQUIPMENT ...........................................................................................................................................8 5.3 LABORATORY ACCREDITATIONS LISTINGS.................................................................................8 5.4 TABLE OF ACCREDITATIONS AND LISTINGS ...............................................................................9 6. CALIBRATION AND UNCERTAINTY...................................................................................................10 6.1 MEASURING INSTRUMENT CALIBRATION....................................................................................10 6.2 MEASUREMENT UNCERTAINTY ......................................................................................................10 7. SETUP OF EQUIPMENT UNDER TEST ................................................................................................11 7.1 SETUP CONFIGURATION OF EUT .....................................................................................................11 7.2 SUPPORT EQUIPMENT ........................................................................................................................12 7.3 EUT OPERATING CONDITION............................................................................................................13 8. APPLICABLE LIMITS AND TEST RESULTS.......................................................................................14 8.1 6DB BANDWIDTH .................................................................................................................................14 8.2 MAXIMUM PEAK OUTPUT POWER ..................................................................................................25 8.3 MAXIMUM PERMISSIBLE EXPOSURE .............................................................................................36 8.4 POWER SPECTRAL DENSITY .............................................................................................................38 8.5 CONDUCTED SPURIOUS EMISSION .................................................................................................48 8.6 RADIATED EMISSIONS........................................................................................................................61 8.6.1 TRANSMITTER RADIATED SUPURIOUS EMSSIONS ............................................................61 8.6.2 WORST-CASE RADIATED EMISSION BELOW 1 GHz ............................................................65 8.6.3 TRANSMITTER RADIATED EMISSION ABOVE 1 GHz ..........................................................69 8.6.4 RESTRICTED BAND EDGES .......................................................................................................93 8.7 POWERLINE CONDUCTED EMISSIONS ...........................................................................................111 9. ANTENNA REQUIREMENT ....................................................................................................................121 9.1 STANDARD APPLICABLE ...................................................................................................................121 9.2 ANTENNA CONNECTED CONSTRUCTION ......................................................................................121 APPENDIX SETUP PHOTOS........................................................................................................................122 Compliance Certification Services Inc. Reference No.: 91002401-RP1 Report No.：T100510402-RP1 FCC ID：ODMTRA3G2 Date of Issue: May 25, 2010 Page 4 1. TEST REPORT CERTIFICATION Applicant ： OvisLink Corp. Address ： 5F , No.6 , Lane 130 , Min-Chuan Rd. , Hsin-Tien Cit…

Text truncated - open the document above for the full version.

Compliance Certification Services Inc. Reference No.: 91002401-RP1 Report No.：T100510402-RP1 FCC ID：ODMTRA3G2 Date of Issue: May 25, 2010 Page 122 APPENDIX SETUP PHOTOS RADIATED EMISSION MEASUREMENT SETUP Compliance Certification Services Inc. Reference No.: 91002401-RP1 Report No.：T100510402-RP1 FCC ID：ODMTRA3G2 Date of Issue: May 25, 2010 Page 123 RADIATED RF MEASUREMENT SETUP Compliance Certification Services Inc. Reference No.: 91002401-RP1 Report No.：T100510402-RP1 FCC ID：ODMTRA3G2 Date of Issue: May 25, 2010 Page 124 Compliance Certification Services Inc. Reference No.: 91002401-RP1 Report No.：T100510402-RP1 FCC ID：ODMTRA3G2 Date of Issue: May 25, 2010 Page 125 POWERLINE CONDUCTED EMISSIONS MEASUREMENT SETUP End of report