OEWAUAC85Ultra WAVE BTS

Part Number 680208-00 1/03 Version A UltraWAVE BTS Installation and Commissioning Guide Release 6.5 ii UltraWAVE BTS Installation and Commissioning Guide, Release 6.5A The products described in this document are products of interWAVE Communications, Inc. or its licensers. No part of this document may be photocopied, reproduced, translated, transferred, disclosed or otherwise provided to third parties without the prior written consent of an officer of interWAVE Communications, Inc. This document applies to the interWAVE Communications, Inc. release of the GSM product line and to all subsequent versions and releases of the hardware or software unless otherwise indicated in a new version or an update package for this edition. Publications requests should be addressed to your local sales support office. interWAVE Communications, Inc. reserves the right to make changes to any products described herein at any time without notice. interWAVE Communications International, Ltd. and interWAVE Communications, Inc. do not assume any responsibility or liability arising out of the application or use of any product described herein, except as expressly agreed to in writing by interWAVE Communications, Inc. nor does the purchase or use of a product from interWAVE Communications, Inc. convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual property rights of interWAVE Communications International, Ltd. or third parties. Use, duplication, or disclosure by the U.S. Government is subject to restrictions of FAR 52.227-14 (g) (2) (6/ 87) and FAR 52.227-19 (6/87), or DFAR 252.227-7015 (b) (6/95) and DFAR 227.7202-3 (a). The software described in this document is furnished under a license agreement or nondisclosure agreement. The software may be used or copied only in accordance with the terms of the agreement. It is a violation of interWAVE Communications International, Ltd. proprietary rights to copy the software on any medium except as specifically allowed in the license or nondisclosure agreement. interWAVE's products are patented by one or more of the following United States Patents: No. 5,781,582, No. 5,682,403, No. 5,734,979, No. 5,734,699, No. 5,999,813, No. 5,953,651, No. 5,887,256, No. 5,577,029, No. 5,761,195, No. 5,842,138, No. 5,818,824, No. 5,957,464, No. 6,078,823, No. 6,070,071, No. 6,101,400, No. USP D 391,967, No. USP D 391,968, No. USP D 397,693. Trademark Acknowledgment interWAVE, WAVEXpress, MicroXpress, WAVEXchange, WAVEView, GSM Network in a Box, and TurboWAVE are trademarks or registered trademarks of interWAVE Communications International, Ltd. All other trademarks, service marks and product names mentioned in this document are the property of their respective owners. ©2003 interWAVE Communications, Inc. All Rights Reserved. iii United States Federal Communications Commission Required User Information Located on the equipment is a label that contains, among other information, the FCC registration number. If requested, this information must be provided to the telephone company. The UltraWAVE BTS Series AUAC series complies with Part 22 of the FCC Rules. The 1900 MHz WAVEXpress Series M50 complies with Part 24 of the FCC Rules. This equipment cannot be used on the telephone company-provided coin service. Connection to Party Line Service is subject to State Tariffs. If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. If advance notice isn’t practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes in its facilities, equipment, operations, of procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make the necessary modifications in order to maintain uninterrupted service. If trouble is experienced with this equipment, please contact: interWAVE Communications, Inc. 312 Constitution Drive Menlo Park, CA 94025 Phone: 650.838.2117 If the trouble is causing harm to the telephone network, the telephone company may request you to remove the equipment from the network until the problem is resolved. It is recommended that the customer install an AC surge arrester in the AC outlet to which that device is connected. This is to avoid damaging the equipment caused by local lightning strikes and other electrical surges. This equipment uses the following USOC jacks and codes: Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Model NameFacility Interface CodeService Order CodeJack Type 34012204DU9-BN6.ONRJ-48C 34012204DU9-DN6.ONRJ-48C 34012204DU9-1KN6.ONRJ-48C 34012204DU9-1SN6.ONRJ-48C 34012204DU9-1ZN6.ONRJ-48C iv UltraWAVE BTS Installation and Commissioning Guide, Release 6.5A Changes of modifications not expressly approved by interWAVE Communications, Inc. can void the user’s authority to operate the equipment. Industry Canada Required User Information CP-O1, Issue 8, Part 1, Section 14.1 NOTICE: The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements as pre…

Text truncated - open the document above for the full version.

INTERW AVE COMMUNICATIONS, INC. 312 CONSTITUTION DRIVE, MENLO PARK, CA 94025-1164 TEL: 6508382000 FAX: 6503216250 WEBSITE: WWW.IWV.COM February 28, 2003 Federal Communications Commission Authorization and Evaluation Division Laboratory Division 7435 Oakland Mills Rd., Columbia, MD 21046 Re Attestation of compliance with the requirement per 47 CFR Part 22 section 22.373 pursuant to an application for certification of a BTS FCC ID: OEW AUAC85 Dear Sir or Madam: InterWave Communications Inc., hereby submits an attestation statement of compliance with the requirement of 47 CFR Part 22 section 22.373, (a) -(d) pursuant to an application for certification of a BTS: FCC ill OEW AUAC85. Transmitters in the BTS are housed in a cabinet with a key lock so that no personnel other than the authorized operators can access to the BTS. In addition, all the transceiver control functions can only be performed on a "Craft PC" by trained technicians using special software, which further prevents tampering of the system. Therefore, the equipment design is compliant with the requirement per section 22.373 (a) and (b). All transmitters in the BTS are equipped with LED indicators. Among them, there are green "On-Line " LED's which will be illuminated when the BTS system is ready to operate. Thus, the equipment design is compliant with the requirement per section 22.373 (c). Each power amplifier of the transmitter has an independent power switch on its front panel. Therefore, the equipment design is compliant with the requirement per section 22.373 (d).

To: Suresh Kondapalli ITS/ES-Mpk Cc: David Chernomordik ITS/ES-Mpk Subject: Review Comments: InterWave Base Station Transmitter FCC ID: OEWAUAC85 Suresh: Technical review of this application is complete. Please respond to the comments below: ADMINISTRATIVE 1) The test report is unsigned. Please provide a version with authorized signatures. 2) Cannot locate information on DC power into final RF stages per 2.1033(c)(8); please provide. 3) Please indicate how base station requirements of 22.373(a)-(d) are met. An attestation of compliance is acceptable. MEASUREMENT DATA 1) It is not clear if spurious conducted emissions were measured at low power as well as high power. Please indicate the output power(s) for test purposes. FCC guidance: "Tests to be done at one operating frequency at maximum power output - except for antenna terminals measurements to be done at both highest and lowest power output levels." 2) Please indicate the output power for test of spurious radiated emissions. It should be high power, per above. 3) The setup photos indicate I/O cable configuration for test of spurious radiated emissions. A description or table of I/O cables would be better. Please note for the future. Thank you, Roland Gubisch

From: Suresh Kondapalli ITS/ES-Mpk Sent: Friday, February 28, 2003 5:41 PM To: Roland Gubisch ITS/ES-Box Cc: David Chernomordik ITS/ES-Mpk; Danielle Gravelle ITS/ES-Box Subject: Response to Review Comments: InterWave Base Station Transmitter FCC ID: OEWAUAC85 Dear Roland, Response to review comments are as follows, ADMINISTRATIVE 1) The test report is unsigned. Please provide a version with authorized signatures. Revised report is enclosed 2) Cannot locate information on DC power into final RF stages per 2.1033(c)(8); please provide. Please see page # 5 of revised report also see para3 of Theory of Operation page#6 3) Please indicate how base station requirements of 22.373(a)-(d) are met. An attestation of compliance is acceptable. Letter of attestation of Compliance is attached MEASUREMENT DATA 1) It is not clear if spurious conducted emissions were measured at low power as well as high power. Please indicate the output power(s) for test purposes. FCC guidance: "Tests to be done at one operating frequency at maximum power output - except for antenna terminals measurements to be done at both highest and lowest power output levels." See Page # 20 of revised report and revised Appendix A 2) Please indicate the output power for test of spurious radiated emissions. It should be high power, per above. See Page # 22 of revised report. 3) The setup photos indicate I/O cable configuration for test of spurious radiated emissions. A description or table of I/O cables would be better. Please note for the future. See Page # 5 of revised report.

FCC ID: OEWAUAC85 EXTERNAL IMAGES Base Station UltraWAVE BTS, AUAC85, Front View FCC ID: OEWAUAC85 EXTERNAL IMAGES Base Station UltraWAVE BTS, AUAC85, Rear View FCC ID: OEWAUAC85 EXTERNAL IMAGES RF-Module in Base Station UltraWAVE BTS, AUAC85 Radio Board 850TRX-Card in Base Station UltraWAVE BTS, AUAC85 FCC ID: OEWAUAC85 EXTERNAL IMAGES Radio Board 850TRX-Card, Side View #1 Radio Board 850TRX-Card, SideView #2 FCC ID: OEWAUAC85 EXTERNAL IMAGES Radio Board, 850TRX-Card Front View Radio Board, 850TRX-Card Rear View FCC ID: OEWAUAC85 EXTERNAL IMAGES RF-Module, Side View #1 RF-Module, Side View #1 FCC ID: OEWAUAC85 EXTERNAL IMAGES RF-Module, Front View RF-Module, Rear View

FV AFB1224 CE FV AFB1224 CE FV AFB1224AFB1224 CE FARSIDE CLS-440-2CLS-440-2 FARSIDEFARSIDE CLS-440-2 FARSIDE CLS-440-2 FARSIDE CLS-440-2CLS-440-2 FARSIDE CLS-440-2 FARSIDE
             

               !"#

FCC ID: OEWAUAC85 RADIO-MODULE, 850TRX-CARD, INTERNAL IMAGES Radio Module, 850TRX-Card, Top Side, Overview FCC ID: OEWAUAC85 RADIO-MODULE, 850TRX-CARD, INTERNAL IMAGES Radio Module, 850TRX-Card, Top Side, Heat Sink Removed FCC ID: OEWAUAC85 RADIO-MODULE, 850TRX-CARD, INTERNAL IMAGES Radio Module, 850TRX-Card, Top Side, Heat Sink & DSP Mezzanine Board Removed FCC ID: OEWAUAC85 RADIO-MODULE, 850TRX-CARD, INTERNAL IMAGES Radio Module, 850TRX-Card, Top Side, Heat Sink Removed, Section #1 FCC ID: OEWAUAC85 RADIO-MODULE, 850TRX-CARD, INTERNAL IMAGES Radio Module, 850TRX-Card, Top Side, Heat Sink Removed, Section #2 FCC ID: OEWAUAC85 RADIO-MODULE, 850TRX-CARD, INTERNAL IMAGES Radio Module, 850TRX-Card, Top Side, Heat Sink Removed, Section #3 FCC ID: OEWAUAC85 RADIO-MODULE, 850TRX-CARD, INTERNAL IMAGES Radio Module, 850TRX-Card, Top Side, Heat Sink Removed, Section #4 FCC ID: OEWAUAC85 RADIO-MODULE, 850TRX-CARD, INTERNAL IMAGES Radio Module, DSP Mezzanine Board Back Side FCC ID: OEWAUAC85 RADIO-MODULE, 850TRX-CARD, INTERNAL IMAGES Radio Module, 850TRX-Card, Back Side, Overview

FCC ID: OEWAUAC85 RF-Module, Internal Overview FCC ID: OEWAUAC85 f LNA (Part of Duplexer Module) FCC ID: OEWAUAC85 LNA, PCB Front View (Part of Duplexer Module) LNA, PCB Back View (Part of Duplexer Module) FCC ID: OEWAUAC85 DSWR-Detector (Reverse & Forward Power Detector) FCC ID: OEWAUAC85 DSWR-Detector, PCB Front View (Reverse & Forward Power Detector) DSWR-Detector, PCB Back View (Reverse & Forward Power Detector) FCC ID: OEWAUAC85 4 Way Splitter FCC ID: OEWAUAC85 4 Way Splitter, PCB Front View 4 Way Splitter, PCB Back View FCC ID: OEWAUAC85 Amplifier FCC ID: OEWAUAC85 Amplifier, PCB Front View Amplifier, PCB Back View

interWAVE Confidential & Proprietary Page 7 of 7 Each RF modules are grounded to the RF subrack with the a contact spring when it is housed in the subrack. 5. Power Tune-up Procedure The output power of the UltraWAVE BTS is controlled by the BTS system software. There is no hardware adjustment for power setting. Under the normal operational condition, the maximum output power is automatically set to 50W(+47dBm) at the antenna port for all transmitter channels. When the system operator need to change the power setting at the BTS, change can be made through the software commands from the remote operation & control center or from the local Craft PC. The power level is controlled down to –12 dB (+35dBm) from the maximum power in 2 dB steps (6 levels). The output power level at the highest and lowest channel frequency (Channel #128:869.2MHz and Channel #251:893.8MHz) is automatically limited to 8W(+39 dBm) by the software in order to meet the FCC spurious requirement at the band edge frequencies (869.0MHz and 894.0MHz). This limitation only applies to these two channels and all other channels are set with nominal 50W(+47dBm). 6. Glossary BB: Baseband BER: B it Error Rate BSC: B ase Station Controller BSS: Base Station System BTS: Base Transceiver Station DSP: Digital Signal Processor GSM: G lobal System for Mobile Communication GMSK: Gaussian Minimum Shift Keying I2C: I nter-Integrated Circuit, name of serial bus LNA: Low Noise Amplifier PS: Power Supply TDM: Time Division Multiplexing VME: Name of computer bus End of document interWAVE COMMUNICATIONS a subsidiary of interWAVE Communications International providing microcellular network solutions interWAVE UltraWAVE BTS Power Tune-up Procedure The information disclosed in this document is proprietary to interWAVE Communications Inc. or others, and is not to be used or disclosed to unauthorized persons without the written consent of interWAVE Communications Inc. The recipient of this document shall respect the security of this document and maintain the confidentiality of the material. The master copy of this document is stored in electronic format, therefore any hard or soft copy used for distribution purposes must be considered as uncontrolled. interWAVE Confidential & Proprietary Page 1 of 1 1. Power Tune-up Procedure The output power of the UltraWAVE BTS is controlled by the BTS system software. There is no hardware adjustment for output power setting. Under the normal operational condition, the maximum output power is automatically set to 50W(+47dBm) at the antenna port for all transmitter channels. When the system operator need to change the power setting at the BTS, change can be made through the software commands from the remote operation & control center or from the local Craft PC. The power level is controlled down to –12 dB (+35dBm) from the maximum power in 2 dB steps (6 levels). The output power level at the highest and lowest channel frequency (Channel #128:869.2MHz and Channel #251:893.8MHz) is automatically limited to 8W(+39 dBm) by the software in order to meet the FCC spurious requirement at the band edge frequencies (869.0MHz and 894.0MHz). This limitation only applies to these two channels and all other channels are set with nominal 50W(+47dBm). 2. Glossary BTS: B ase Transceiver Station End of document

Intertek Testing Services ETL SEMKO Test performed on the Ultra W A VE BTS Model: AUAC85 FCC ID: OEW AUAC85 for InterWave Communications Inc. Test Report: 30368271 Date of Report: January 16,2003 Revised Date: February 28, 2003 Job #: 3036827 Date of Test: January 7 to 16,2003 A2LA Certificate Number: 1755-01 Test Authorized by: InterW A YE Communications Inc. 312 Constitution Dr. Menlo Park, CA 94025 Date: 02-- r '- 9 ~ o :s Warnock Hersey --- .i..- Test Performed by: Intertek Testing Services 1365 Adams Court Menlo Park, CA \--L Prepared by: c:- Suresh Kondapalli Reviewed by: ~d ~lU/f.eIu.c.If'\t'(, k David Chemomordik "" , "' 'm ~;; em: Ui -',' CC;~\ l~) Intertek Testing Services NA, Inc. 1365 Adams Court, Menlo Park, CA 94025 Telephone 650-463-2900 Fax 650-463-2910 Home Page www.etlsemko.com 1365 Adams Court, Menlo Park, CA 94025 InterWave Communications Inc. FCC ID: OEWAUAC85 File: 30368271 Page 2 of 39 FCC Part 22 H TABLE OF CONTENTS 1.0 Introduction................................................................................................................................. 4 1.1 Test Summary ................................................................................................................. 4 1.2 Product Description ........................................................................................................ 5 1.3 Related Submittal(s) Grants ............................................................................................ 5 2.0 RF Power Output, ....................................................................................................................... 6 2.1 Test Procedure ................................................................................................................6 2.2 Test Equipment ............................................................................................................... 6 2.3 Test Results..................................................................................................................... 6 3.0 Radiated Power ......................................................................................................................... 17 3.1 Test Procedure .............................................................................................................. 17 3.2 Test Result ....................................................................................................................17 4.0 Occupied Bandwidth ................................................................................................................ 18 4.1 Test Procedure .............................................................................................................. 18 4.2 Test Equipment ............................................................................................................. 18 4.3 Test Results....................................................................................................................18 5.0 Out of Band Emissions at Antenna Terminals ....................................................................... 20 5.1 Test Procedure .............................................................................................................. 20 5.2 Test Equipment ............................................................................................................. 20 5.3 Test Results...................................................................................................................20 6.0 Field Strength of Spurious Radiation...................................................................................... 21 6.1 Test Procedure .............................................................................................................. 21 6.2 Test Equipment ............................................................................................................. 21 6.3 Test Results...................................................................................................................21 7.0 Spurious Emissions from digital part...................................................................................... 23 7.1 Procedure ......................................................................................................................23 7.2 Test Results...................................................................................................................24 8.0 Line Conducted Emissions, ......................................................................................................34 8.1 Test Procedure .............................................................................................................. 34 8.2 Test Results...................................................................................................................34 9.0 Frequency Stability vs Temperature....................................................................................... 36 9.1 Test Procedure .............................................................................................................. 36 9.2 Test Equipment ............................................................................................................. 36 9.3 Test Results...................................................................................................................36 10.0 Frequency Stability vs Voltage ................................................................................................ 37 10.1 Test Procedure .............................................................................................................. 37 10.2 Test Equipment ............................................................................................................. 37 10.3 Test Results...................................................................................................................37 1365 Adams Court, Menlo Park, CA 94025 InterWave Communications Inc. FCC ID: OEWAUAC85 File: 3…

Text truncated - open the document above for the full version.

1365 Adams Court, Menlo Park, CA 94025 InterWave Communications Inc.., Model No: AUAC85 - AC FCC ID: OEWAUAC85 Date of Test: January 7 to 16, 2003 File: APPENDEX A Page 1 of 30 FCC Part 22 APPENDIX A Out of Band Emissions at Antenna Terminal FCC 22.901(d), 24.238(a) Plot Number Description 5.1.a - 5.1.e Channel # 128, high Power (reduced), 38.2 dBm 5.2.a - 5.2.e Channel #129, high Power, 46.5 dBm 5.3.a - 5.3.e Channel #192, high Power, 46.9 dBm 5.4.a - 5.5.e Channel #250, high Power, 46.6 dBm 5.5.a - 5.5.e Channel #251, high Power (reduced), 37.9 dBm 5.6.a – 5.6.d Channel # 192, lower Power, 20.7 dBm 1365 Adams Court, Menlo Park, CA 94025 InterWave Communications Inc.., Model No: AUAC85 - AC FCC ID: OEWAUAC85 Date of Test: January 7 to 16, 2003 File: APPENDEX A Page 2 of 30 FCC Part 22 1365 Adams Court, Menlo Park, CA 94025 InterWave Communications Inc.., Model No: AUAC85 - AC FCC ID: OEWAUAC85 Date of Test: January 7 to 16, 2003 File: APPENDEX A Page 3 of 30 FCC Part 22 1365 Adams Court, Menlo Park, CA 94025 InterWave Communications Inc.., Model No: AUAC85 - AC FCC ID: OEWAUAC85 Date of Test: January 7 to 16, 2003 File: APPENDEX A Page 4 of 30 FCC Part 22 # 5.1.c 1365 Adams Court, Menlo Park, CA 94025 InterWave Communications Inc.., Model No: AUAC85 - AC FCC ID: OEWAUAC85 Date of Test: January 7 to 16, 2003 File: APPENDEX A Page 5 of 30 FCC Part 22 # 5.1.d 1365 Adams Court, Menlo Park, CA 94025 InterWave Communications Inc.., Model No: AUAC85 - AC FCC ID: OEWAUAC85 Date of Test: January 7 to 16, 2003 File: APPENDEX A Page 6 of 30 FCC Part 22 # 5.1.e 1365 Adams Court, Menlo Park, CA 94025 InterWave Communications Inc.., Model No: AUAC85 - AC FCC ID: OEWAUAC85 Date of Test: January 7 to 16, 2003 File: APPENDEX A Page 7 of 30 FCC Part 22 1365 Adams Court, Menlo Park, CA 94025 InterWave Communications Inc.., Model No: AUAC85 - AC FCC ID: OEWAUAC85 Date of Test: January 7 to 16, 2003 File: APPENDEX A Page 8 of 30 FCC Part 22 1365 Adams Court, Menlo Park, CA 94025 InterWave Communications Inc.., Model No: AUAC85 - AC FCC ID: OEWAUAC85 Date of Test: January 7 to 16, 2003 File: APPENDEX A Page 9 of 30 FCC Part 22 # 5.2.c 1365 Adams Court, Menlo Park, CA 94025 InterWave Communications Inc.., Model No: AUAC85 - AC FCC ID: OEWAUAC85 Date of Test: January 7 to 16, 2003 File: APPENDEX A Page 10 of 30 FCC Part 22 # 5.2.d 1365 Adams Court, Menlo Park, CA 94025 InterWave Communications Inc.., Model No: AUAC85 - AC FCC ID: OEWAUAC85 Date of Test: January 7 to 16, 2003 File: APPENDEX A Page 11 of 30 FCC Part 22 # 5.2.e 1365 Adams Court, Menlo Park, CA 94025 InterWave Communications Inc.., Model No: AUAC85 - AC FCC ID: OEWAUAC85 Date of Test: January 7 to 16, 2003 File: APPENDEX A Page 12 of 30 FCC Part 22 1365 Adams Court, Menlo Park, CA 94025 InterWave Communications Inc.., Model No: AUAC85 - AC FCC ID: OEWAUAC85 Date of Test: January 7 to 16, 2003 File: APPENDEX A Page 13 of 30 FCC Part 22 1365 Adams Court, Menlo Park, CA 94025 InterWave Communications Inc.., Model No: AUAC85 - AC FCC ID: OEWAUAC85 Date of Test: January 7 to 16, 2003 File: APPENDEX A Page 14 of 30 FCC Part 22 1365 Adams Court, Menlo Park, CA 94025 InterWave Communications Inc.., Model No: AUAC85 - AC FCC ID: OEWAUAC85 Date of Test: January 7 to 16, 2003 File: APPENDEX A Page 15 of 30 FCC Part 22 1365 Adams Court, Menlo Park, CA 94025 InterWave Communications Inc.., Model No: AUAC85 - AC FCC ID: OEWAUAC85 Date of Test: January 7 to 16, 2003 File: APPENDEX A Page 16 of 30 FCC Part 22 1365 Adams Court, Menlo Park, CA 94025 InterWave Communications Inc.., Model No: AUAC85 - AC FCC ID: OEWAUAC85 Date of Test: January 7 to 16, 2003 File: APPENDEX A Page 17 of 30 FCC Part 22 1365 Adams Court, Menlo Park, CA 94025 InterWave Communications Inc.., Model No: AUAC85 - AC FCC ID: OEWAUAC85 Date of Test: January 7 to 16, 2003 File: APPENDEX A Page 18 of 30 FCC Part 22 # 5.4.b 1365 Adams Court, Menlo Park, CA 94025 InterWave Communications Inc.., Model No: AUAC85 - AC FCC ID: OEWAUAC85 Date of Test: January 7 to 16, 2003 File: APPENDEX A Page 19 of 30 FCC Part 22 # 5.4.c 1365 Adams Court, Menlo Park, CA 94025 InterWave Communications Inc.., Model No: AUAC85 - AC FCC ID: OEWAUAC85 Date of Test: January 7 to 16, 2003 File: APPENDEX A Page 20 of 30 FCC Part 22 # 5.4.d 1365 Adams Court, Menlo Park, CA 94025 InterWave Communications Inc.., Model No: AUAC85 - AC FCC ID: OEWAUAC85 Date of Test: January 7 to 16, 2003 File: APPENDEX A Page 21 of 30 FCC Part 22 # 5.4.e 1365 Adams Court, Menlo Park, CA 94025 InterWave Communications Inc.., Model No: AUAC85 - AC FCC ID: OEWAUAC85 Date of Test: January 7 to 16, 2003 File: APPENDEX A Page 22 of 30 FCC Part 22 1365 Adams Court, Menlo Park, CA 94025 InterWave Communications Inc.., Model No: AUAC85 - AC FCC ID: OEWAUAC85 Date of Test: January 7 to 16, 2003 File: APPENDEX A Page 23 of 30 FCC Part 22 # 5.5.b 1365 Adams Court, Menlo Park, CA 94025 InterWave Communications Inc.., Model No: AUAC85 - AC FCC ID: OEWAUAC85 Date of Test: January 7 to 16, 2003 File: APPENDEX A Page 24 of 30 FCC Part 22 # 5.5.c 1365 Adams Court, Menlo Park, CA 94025 InterWave Communications Inc.., Model No: AUAC85 - AC FCC ID: OEWAUAC85 Date of Test: January 7 to 16, 2003 File: APPENDEX A Page 25 of 30 FCC Part 22 # 5.5.d 1365 Adams Court, Menlo Park, CA 94025 InterWave Communications Inc.., Model No: AUAC85 - AC FCC ID: OEWAUAC85 Date of Test: January 7 to 16, 2003 File: APPENDEX A Page 26 of 30 FCC Part 22 # 5.5.e 1365 Adams Court, Menlo Park, CA 94025 InterWave Communications Inc.., Model No: AUAC85 - AC FCC ID: OEWAUAC85 Date of Test: January 7 to 16, 2003 File: APPENDEX A Page 27 of 30 FCC Part 22 1365 Adams Court, Menlo Park, CA 94025 InterWave Communications Inc.., Model No: AUAC85 - AC FCC ID: OEWAUAC85 Date of Test: January 7 to 16, 2003 File: APPENDEX A Page 28 of 30 FCC Part 22 1365 Adams Court, Menlo Park, CA 94025 InterWave Communications Inc.., Model No: AUAC85 - AC FCC ID: OEWAUAC85 Date of Test: January 7 to 16, 2003 File: APPEN…

Text truncated - open the document above for the full version.

RADIATED EMISSIONS FCCID: OEWAUAC85 RADIATED EMISSIONS FCCID: OEWAUAC85 LINE CONDUCTED EMISSIONS FCCID: OEWAUAC85 LINE CONDUCTED EMISSIONS FCCID: OEWAUAC85