OIWCMRPCS2480Bi-Directional Booster

August 15, 2007 Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Authority to Act as Agent On our behalf, I appoint NEMKO Canada Inc. to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in Industry Canada’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with Dekolink Wireless, 12 Bazel St. petach-Tikva Israel, 49001. Dated this 15 Day of August 2007 Agency agreement expiration date: December 31 st 2008 By: Shmuel Bleichman Signature Printed Title: Director of Engineering On behalf of : Dekolink Wireless Ltd. Telephone: +972-3-918-0180

Dekolink WIRELESS Ltd. 16 Bazel St. Qiryat-Arieh Petah-Tikva, Israel, 49510 Tel- 972-3-9180-180 Fax-972-3-190-9180 e-mail: [email protected] web www.dekolink.com August 15, 2007 Equipment Authorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 CONFIDENTIALITY REQUEST FOR: FCC ID: OIWCMRPCS2480 To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: • Schematics • Block diagram • Operational description, it is provided to customer based on non-disclosure agreement. • photos of circuits and amplifiers and internal photos, it is permanently mounted /sealed, not generally publicly accessible • Part list. • Tune up procedure. • User manual, provided to customer based on non-disclosure agreement. These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Please contact me if there is any information you may need. Sincerely, September 16, 2007 Shmuel Bleichman, Director of Engineering Dekolink Wireless Ltd. 16 Bazel St. Qiryat-Arieh Petah-Tikva, Israel, 49001 Tel- 972-3-9180173 Fax-972-3-9180190

ADDED IC NUMEER 0 - RELEASE 06.06.07 HE 19.06.07 19.06.07 1 1 NONE 28.06.07 LABEL 9713000097 HAIMEHAIM E 0.10.1 A 9713000097 C00041 HE SPRINT 2419 A NOTE:1. MATERIAL: LABEL, SILVER METALIZED POLYESTER WIT H 3M 467MP + PERMANENT ACRYLIC BACK ADHESIVE. 2. PRINTING: BLACK. 2.1 TEXT: HELVETICA MEDIUM.3. USE RIBBON ACCORDING TO LABEL MANUFACTURER RECO MMENDATION. 4. FOR SERIAL NUMBER SEE LABEL INFORMATION.5. BAR CODE TYPE ACCORDING TO CODE-1286. THE LABELS MUST BE SUPPLIED ON ROLL. 38.10 76.20 DO NOT SCALE DRAWING 1 2 3 4 5 6 A B CD C B A D DESCRIPTION 1 2 3 5 6 4 REV ECO # DATE APPROVED PART REV. DRAWN ALL DIMENSIONS ARE IN MM. SHARP EDGES 0.1-0.3mm DATE NAME CHECK. DESIGN SIGNTUR SHEET SCALE OF A3 BREAK SHARP CORNERS & MANGR TITLE BURR & FLASH Max. PROJCT Max. LINEAR MM HOLE + MMBETWEEN HOLES MM ANGULAR DRAFTANGLE/SIDE UNLESS OTHERWISE SPECIFIED PART No. This Document and Any Attachments Thereto Contain Propi etary Confidential and Privileged Information and Is for the Sole Use of the Intended Recipient(s). Any Unauthorized Review, Use, Reproduction, Disclosure or Distribution Is Strictly Prohibited. 9713000097.SLDDRW08/10/2007Page 1 of 1 A 06.05.0706.05.07 300MC70000 ?NOTE? NONE ?PARTNUM? ?REV? ?ECO? ?NAME? ?DATE? LABEL LOCATION HAIM E SPRINT 2419 HAIM E DETAIL A SCALE 1 : 1 5.00 5.00 A3 PROJCT Max. ALL DIMENSIONS ARE IN MM. DO NOT SCALE DRAWING 1 2 3 4 5 6 A B CD C B A D DESCRIPTION 1 2 3 5 6 4 REV ECO # OF BREAK SHARP CORNERS & MANGR TITLE BURR & FLASH Max. SHARP EDGES 0.1-0.3mm DATE NAME CHECK. DESIGN SIGNTUR DATE APPROVED PART REV. DRAWN SHEET SCALE LINEAR MM HOLE + MMBETWEEN HOLES MM ANGULAR DRAFTANGLE/SIDE UNLESS OTHERWISE SPECIFIED PART No. This Document and Any Attachments Thereto Contain Propi etary Confidential and Privileged Information and Is for the Sole Use of the Intended Recipient(s). Any Unauthorized Review, Use, Reproduction, Disclosure or Distribution Is Strictly Prohibited. 09/10/2007Page 1 of 1

Prediction of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01where: S = power density P = power input to the antennaG = power gain of the antenna in the direction of interest relative to an isotropic radiatorR = distance to the center of radiation of the antenna Maximum peak output power at antenna input terminal: 31.89 (dBm) Maximum peak output power at antenna input terminal: 1545.25444 (mW) Antenna gain(typical): 2 (dBi) Maximum antenna gain: 1.584893192 (numeric) Prediction distance: 20 (cm) Prediction frequency: 1930 (MHz) MPE limit for uncontrolled exposure at prediction frequency: 1 (mW/cm^2) Power density at prediction frequency: 0.487226 (mW/cm^2) Maximum allowable antenna gain: 5.122698554 (dBi) Margin of Compliance: 3.122698554 2 4 R PG S π =

www.nemko.com Test Report: 90467-1TRFWL Applicant: Dekolink Wireless Ltd. 16 Bazel St. Qiryat-Arieh, Petah-Tikva, Israel 49510 Apparatus: MW-CMR-PCS-2480 FCC ID: OIWCMRPCS2480 In Accordance With: FCC Part 24 Personal Communications Services Subpart E Broadband PCS Tested By: Nemko Canada Inc. 303 River Road Ottawa, Ontario K1V 1H2 Authorized By: Jason Nixon, Telecom Specialist Date: September 25, 2007 Total Number of Pages: 27 FCC Part 24 : October 2006 Nemko Canada Inc. REPORT SUMMARY Report Number: 90467-1TRFWL FCC ID: OIWCMRPCS2480 Specification: FCC Part 24 Report Summary These tests were conducted on a sample of the equipment for the purpose of demonstrating compliance with Part 24. Conducted measurements were performed in accordance with ANSI TIA-603-B-2002. Radiated tests were conducted is accordance with ANSI C63.4-2003. Radiated emissions are made on an open area test site. A description of the test facility is on file with the FCC. The assessment summary is as follows: Apparatus Assessed: MW-CMR-PCS-2480 Specification: FCC Part 24 Subpart E Broadband PCS Compliance Status: Complies Exclusions: None Non-compliances: None Report Release History: Original Release Author: Heng Lin EMC / Wireless Specialist Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. Page 2 of 27 Nemko Canada Inc. REPORT SUMMARY Report Number: 90467-1TRFWL FCC ID: OIWCMRPCS2480 Specification: FCC Part 24 TABLE OF CONTENTS Report Summary.........................................................................................................................................2 Section 1 : Equipment Under Test.............................................................................................................4 1.1 Product Identification.................................................................................................................................4 1.2 Samples Submitted for Assessment............................................................................................................4 1.3 Theory of Operation...................................................................................................................................4 1.4 Technical Specifications of the EUT..........................................................................................................5 Section 2 : Test Conditions.........................................................................................................................6 2.1 Specifications.............................................................................................................................................6 2.2 Deviations From Laboratory Test Procedures ............................................................................................6 2.3 Test Environment.......................................................................................................................................6 2.4 Test Equipment...........................................................................................................................................6 Section 3 : Observations.............................................................................................................................7 3.1 Modifications Performed During Assessment ............................................................................................7 3.2 Record Of Technical Judgements...............................................................................................................7 3.3 EUT Parameters Affecting Compliance.....................................................................................................7 3.4 Test Deleted................................................................................................................................................7 3.5 Additional Observations.............................................................................................................................7 Section 4 : Results Summary.....................................................................................................................8 4.1 FCC Part 24 Subpart E : Test Results.........................................................................................................9 Appendix A : Test Results........................................................................................................................10 Clause 24.232 Output Power ...............................................................................................................................10 Clause 24.238 Conducted Spurious Emissions....................................................................................................11 Clause 24.238 Radiated Spurious Emissions.......................................................................................................16 Clause 2-11-04/EAB/RF Occupied Bandwidth...................................................................................................17 Clause 2-11-04/EAB/RF Out of Band Rejection.................................................................................................21 Appendix B : Setup Photographs............................................................................................................…

Text truncated - open the document above for the full version.